How many faces (people) are recommended to "teach" iPhoto '11?

I love this feature, however, I don´t know how many faces (people) are recommended to teach it... I started to tag every single person I knew in my Library, not just my family and close friends, but EVERYONE, even those who I only met once or twice a year... suddenly, I had a really big "Faces" section and I started to concern if this was "healthy" for the programm. So, the question is, Is it OK to teach iPhoto to recognize every single person I know? Or should I just let it "learn" to recognize the closest to me?, Is there an ideal number of people for the Programm to recognize? Thanks in advance for your support!!!!

I don't think anyone outside of Apple can really answer this. But, IMHO, there is no need to include *everyone* in your faces group, just those you want to find later.

Similar Messages

How many work processes are recommended by SAP for 16 GB RAM

How many work processes are recommended by SAP for 16 GB RAM ?

This is the calculation for determining the number of work process according to the available memory for the system.
- Number of dialog work processes = RAM/256 (min 2, max 18)
- Number of update work processes = RAM/768 (min 1, max 6)
- Number of update2 work processes = RAM/1024 (min 1, max 3)
- Number of batch work processes = RAM/1024 (min 2, max 3)
- Number of enqueue work processes = 1
- Number of spool work processes = 1
You can also refer the following link regarding memory management in SAP .
http://help.sap.com/saphelp_nw70/helpdata/EN/02/962817538111d1891b0000e8322f96/frameset.htm
It explains the calculation based on number of processors for the server.
Regards,
Jazz

How many sapdata filesystems are recommended?

Hi all,
We currectly have an ECC 6.0 installation. It's database is near 9TB, and right now is stored in more than 83 sapdata filesystems (sapdata1, sapdata2,..., sapdata83)
We're using Automatic Storage on DB2 V9.5, and we're currently preparing a migration to another server so we have the opportunity to re-build the database sub-system by importing our data into a fresh filesystem and disk layout.
We ask for your help to learn about the restrictions and recommendation of creating the sapdata filesystems.
Specifically we need some info about the following question:
1.- Which are the best practices regarding number of sapdata per GB of database space?
2.- What are the size limit per container?
We have the dafault pagesize (16K).

Thanks very much for your help!
We open a message to the OSS Support and, as mentioned, there is not a rule to define the number of sapdata filesystems.
As we activated Row Compression, we ended with a 5~6 TB database, and we distributed into 16 sapdata filesystems (500GB each to prevent full disk on data growth).
Again thank you.
Cristian

EDGE being used in 3G area. How many other people see this??

I'm just trying to get a feel for how many other people see this.
In the last 6 weeks or so, twice my phone has switched from 3G to EDGE when i'm in a strong 3G area. Yesterday it did it just as I was leaving work and my iPhone stayed on EDGE all the way back home, when I know that the area in question is fully covered by 3G (and my iPhone normally says 3G). Later at home I went to use the phone and noticed it had finally switched back to 3G instead of EDGE.
Is this an area issue with AT&T getting overloaded? Is this a bug in the iPhone software? Anybody else experience this periodically?
Mark.

First off, it could either be an issue with AT&T's network being overloaded so it switched you to Edge, or it could be a bug in the iPhone software.
Second, are you measuring the signal strength by how many bars the iPhone shows or by the dbm numbers? The dbm numbers show the actual signal strength and the bars don't. The iPhone could have a horrible signal and still show you 3-5 bars. To see the actual dbm numbers, you have to go into the phone feature and type in "star12345#3001#star" and hit send (be sure to place the * in place of the word star). Once you do that you will enter test mode and you will notice that there are numbers in the top left instead of the bars. The numbers range from (this is not the exact range because I don't know) -55 to -117. The lower the number the stronger signal you have, once you start hitting -100 your signal is getting pretty weak. If you want to continually be able to see the dbm numbers you have to force quit out of the field test mode. If you are on 3.x firmware you have to hold the sleep button until the power off slider appears, let go of the sleep button and then hold down the home button. Once the app closes you can now tap on the top left and switch between bars and dbm numbers.

How many itunes accounts are allowed per computer?

Hi, I'm trying to figure out the best way to handle configuring all 80 of the iPads my business is purchasing. I know there is a limit of 10 devices per iTunes account. How many iTunes accounts are permitted per computer? I tried to just create 8 apple ids, which I was able to do online. But when I try to sign in to those on iTunes, once I get to the part where I verify with a credit card, I can not get past the 3rd one. I have previously signed in with 2 other accounts on my machine, so I'm wondering if there is a limit of 5 accounts per computer. Can anyone verify? If that's true, what suggestions do you have for how to get around or best manage this situation?
I'm not as much of a techie as I should be.. but thanks in advance for your help!!

Hi allisonwfrom nc,
The limit you are referring to is for a single personal Apple ID (not for multiple users) that is allowed to be associated with a total of 10 devices (up to 5 computers and the rest on iOS devices). Example you can have 5 computers and 5 iOS devices, 3 computers and 7 iOS devices, but not 6 computers and 4 iOS devices.
From http://www.apple.com/legal/itunes/us/terms.html#SERVICE
Association of Associated Devices is subject to the following terms:
i) You may auto-download iTunes Auto-Delivery Content or download previously-purchased iTunes Eligible Content from an Account on up to 10 Associated Devices, provided no more than 5 are iTunes-authorized computers.
Again this is for a single user. For multiple users like in schools or businesses you need to use VPP to purchase multiple licenses. http://www.apple.com/business/vpp/
APP STORE PRODUCT USAGE RULES
( i )If you are an individual acting in your personal capacity, you may download and sync an App Store Product for personal, noncommercial use on any iOS Device you own or control.
( ii ) If you are a commercial enterprise or educational institution, you may download and sync an App Store Product for use by either (a) a single individual on one or more iOS Devices used by that individual that you own or control or (b) multiple individuals, on a single shared iOS Device you own or control. For example, a single employee may use an App Store Product on both the employee's iPhone and iPad, or multiple students may serially use an App Store Product on a single iPad located at a resource center or library. For the sake of clarity, each iOS Device used serially by multiple users requires a separate license.
If you are an educational institution or business you will want to enroll in Apple's Volume Purchase Program (VPP) which allows a single Apple ID to purchase multiple licenses of an app.
There is a free OS X program called Apple Configurator that you can use to distribute the VPP codes to your fleet of iPads. Apple Configurator uses a single Apple ID to install apps on your iPads. Configurator will also allow you to install free apps on multiple iPads using a single Apple ID.
There are a few things I recommend you do to get started:
First I would watch the iOS Deployment Model Videos on the left side of this page:
http://www.apple.com/education/resources/information-technology.html
Then I recommend you read through these two guides:
iOS 6 Education Deployment Guide
http://images.apple.com/education/docs/ios_6_education_deployment_guide.pdf
Apple Configurator Help Guide
http://help.apple.com/configurator/mac/1.0/
This will give you a solid foundation for managing iPads with Apple Configurator. Once you read through these guides you will likely have more specific questions that you can post to these forums.
Hope this answers your question!
~Joe

How many Delta types are availabvle in Lo Extraction

How many Delta types are available in Lo Extraction
please tell me i am facing in every interview.
Thanks in advance,
Ashok V

hi
now three types of update methods are available in Lo extraction
A.Direct Delta:- In case of Direct delta LUWs are directly posted to Delta Queue (RSA7) and we extract the LUWs from Delta Queue to SAP BW by running Delta Loads. If we use Direct Delta it degrades the OLTP system performance because when LUWs are directly posted to Delta Queue (RSA7) the application is kept waiting until all the enhancement code is executed.
B.Queued Delta: - In case of Queued Delta LUWs are posted to Extractor queue (LBWQ), by scheduling the V3 job we move the documents from Extractor queue (LBWQ) to Delta Queue (RSA7) and we extract the LUWs from Delta Queue to SAP BW by running Delta Loads. Queued Delta is recommended by SAP it maintain the Extractor Log which us to handle the LUWs, which are missed.
D.Un serialized V3 Update: - In case of Un serialized V3 update LUWs are posted to Update Queue ( SM13 ), by scheduling the V3 job which move the documents from Extractor queue ( LBWQ ) to Delta Queue ( RSA7 ) and we extract the LUWs from Delta Queue to SAP BW by running Delta Loads. Since the LUWs are not moved in a Serial fashion from Update queue to Delta queue if we have any error document it considers the subsequent documents and no sorting of documents based on the creation time. It improves the OLTP system performance as it forms a segment for one language.
hope this will solve your problem
nagarjuna

How many other people would like to see a "GarageBand-esque" skin/gui???

how many other people would like to see a "GarageBand-esque" skin/gui for logic express/pro???
i use all three apps a lot, and the main thing i really enjoy about GarageBand is the simple single window interface.
i would like to see apple make the option of having a single window skin for logic.
iMac CoreDuo 2ghz/2GB/500GB Mac OS X (10.4.2)

The good thing about the Logic GUI, how grey and dull it may look, is that you don´t focus on it. It is pleasant to your eyes--and mind.
Garageband is for fun. If Logic should have a lift, I think inspiration should come from Final Cut. An app that initially was developed maybe 10 years later than Logic.
Problem with Logic is that it has been on the run for such a long time.
Quite a few menus haven´t changed in almost 15 years, well 10, then.
(Look at the much loved/hated environment)
Can´t help compare to SX, that had a completely new GUI, with the switch from Vst to SX. At a glance it is much more elegant than Logic.-And many features are superior to Logic--But, as your arrangement in SX grows, your screen will be cluttered--In a mess...all the bells and whistles.
And Logic remains cleaner in it´s dullness.
But, I´m very much annoyed with the GUI of a few Logic instruments.
The worst is Sculpture. Well, the GUI may be fancy enough, but do you have to use a magnifying glass to watch? It is just as bad as Reason!
I remember doing a post about upgrading graphic cards (I have 64 mb) and was adviced: No use, you will not benefit from upgrading, if you primarly use Logic....So Logic has a poor resolution or what? I don´t know, Tell me.
JanD

I have a presentation to make to a customer and need to know how many educational apps are there for the iPad/iPod?

I have a presentation to make to a customer and need to know how many educational apps are there for the iPad/iPod? More specifically special education apps.
Thanks

Keep in mind as well that not all apps are "created equal". Some are really good, and others are not very good. You might also want to look at some education sites for recommendations. An example of a general iPads in education forum is
http://ipadeducators.ning.com/
but I imagine some exist for special education needs as well. Our healthcare organization is using some apps for working with autistic children and find them very helpful.

I am reading in ibooks and i do not see how many pages there are or what page i am on. how do i fix this

i am reading in ibooks and i do not see how many pages there are or what page i am on. how do i fix this

Some books may not display a page number on each page, or the position indicator, because the author did not include them.
Most basic books resembling paperbacks that are mostly words (like Kindle books) will display these because they are so basic
that iBooks knows they need to have that information superimposed, so it just does it.
For more advanced books, the people who made the book may elect to not display page numbers for some or all of the pages.
What book are you reading, and have you looked at another book and had the same problem?

How Many of You are Willing?

How many of you are willing to line up at the stores like we did for the launch to demand justice?
Frankly, I'd be encouraged to see people actually get off the 'net and go out on the streets. Me? I'll save my shoes for things like:
Stopping a war on Iran.
Actually voting so that massive vote fraud does not matter.
Changing fund policy so the dollar does not collapse, so we'll still be able to buy cool gadgets manufactued in China.
Making sure there is no draft so my son does not go to war.
Ensuring that executive orders don't suspend government in the event of another terrorist attack.
Am I loosing perspective here? I consider myself lucky, if not a bit foolish, to have been able to get an iPhone on day zero.
I still want a credit, but is this the only thing that gets us mad enough these days?
Ok, back to your regularly scheduled support forum.

Please tell me that there are others who touch their phone and feel somewhat dirty, but very priviledged and are willing to see things for what they are.
Oh, and please tell me Apple has a strategy for allowing me to develop legit 3rd party apps too.
And the credit thing too. So I can buy more Apple stuff and feel good about it.
(wow, am I shallow or what?)

How many cooling fans are in 13" MacBook Pro retina?

I just got a late 2013 13" MacBook Pro with retina display and I'm wondering how many cooling fans are in the machine. I've noticed when I use iTunes to play music/movies or use the iTunes visualizer, it gets hot. I've seen the videos on the retinas and I've notived that the 15" model has two and I can't find any videos or pictures indicating whether the 13" has one or two. I know that the openings on the side are to bring in air and then pushes it out where the screen and the keyboard meet. I notice a lot of hot air coming out more towards the right of the machine than the left. I had a mid 2012 non-retina Pro but I had it replaced as it had too many issues and I know when I used it, it didn't get as hot when I did this stuff. I'm just making sure in case it's an issue, even thought I got this new MacBook on Monday 6/9/14. I'm also guessing it heats up faster since its a smaller machine and the components are a lot closer. And I understand that playing games or doing something that requires a lot of processing or graphics power will cause the machine to heat up since it's requiring so much from the machine. Like I said, I want to avoid having issues with this one. My last MacBook had three logic boards, two hard drives, hard drive cable, hard drive bracket, and clam shell replaced in less than a year of purchase in September 2013. When the hard drive crashed last week for no apparent reason last week, I took it to Apple on Monday this week and they finally made the choice to replace it completely and I upgraded to a retina just by paying the difference.

This is my mac's info. I got it as a gift from australia. Initial 3 months it gave me a superb service, but recently it's having a major overheating issue,it shoots up up to 87 degrees. Is it possible that any other components are damaged somehow? Usually the temperature shoots up while I play online streamings.

Can anybody tell me how many text elements are there in sap scripts?

hi all,
can anybody tell me how many text elements are there in sap scripts?

Hi,
Do you mean that you want to know how many Text-elements are there in a specific Script or you want to know how many max Text-Elements a script can have?
I believe there is no limit on this......
To know all the Text Elements in a Script......goto SE71....press F4 Help on Script Name....Choose Last option for Custom developed Scripts.....and you can open the complete Script details & Code in a Line Editor...After that you can serach/look for the text elements

Getting the page size and knowing how many pages they are in PDF file

Hi There,
when i do this script (
var myPDFFile = File.openDialog(["Choose a PDF File"]); )
with JS via Windows it is used for opening a new PDF file when i import this file i need to
get the page size and how many pages they are in PDF file. but i dont know how to do it.
please help me.

Ask here: http://forums.adobe.com/community/indesign/indesign_scripting

Hallo. My computer can't see my iPhone 4 when I open iTunes. iPhoto sees my iPhone as a device, but can't see its photos, although it recognizes how many photos there are. Some help? Thanks

Hallo.
My computer can't see my iPhone 4 when I open iTunes. iPhoto sees my iPhone as a device, but can't see its photos, although it recognizes how many photos there are. Some help?
Thanks

Did you also read that same link you provided and see this "With iTunes 10.3 or later and iOS 4.3.3 or later, "?
Iphone 3G does not support ios 4.3

How to filter results from 4 dynamic list menus depandant on how many of them are selected

I have a search page with a form with 4 list menus and 1 submit that post the results to the results page. I can create a record set that either retrieves the correct data from my database if a selection is made from all four menus Or i can create the recordset if only 3 menus have a selection or the same for 2 menus and 1 menu. However i want the user to be able to make a selection from either 1, 2, 3 or all 4 of the menus and the exact data be retrieved. At present if i try to combine the recordset using AND and ORs the results are not specific enough, for example the 4 menus are Location, Type, Price & Style if a user selects from all 4 i only want to retrieve data that matches all 4 criteria, but at the same time if the user selects only 2 of the menus the i want it to retrieve data that matches specifically those 2 variables. I´m not actually sure if i should be creating a more advanced sql query of if its the php side of things that i need to look at. This is my first dynamic site so please be aware i´m still a learner where php and sql is concerned. Please can anyone help?

Hey there,
Thanks for replying,
I too am using Dreamweaver recordset, my local server is XAMPP ( apache php mysql), i´have pasted my sql recordset below to give an idea of what i´m trying to do, however this does not work as i´m trying to select the exact data based on 4 menus PRICE TYPE LOCATION and BEDS, and also want the search to work if the user only selects options from either 1, 2, 3 or 4 of the menus, with the code as it is if the user select only two options from 2 of the menus the results don´t just find (for example) all results for location AND price they find all results for the location varibale OR the price variable rather than a match for both, if you see what i mean?
Any suggestions?
SELECT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number`
FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid
WHERE (location=varloc AND price = varprice AND type=vartype AND beds=varbed ) OR (price=varprice AND location=varloc AND type=vartype) OR (price=varprice AND location=varloc AND beds=varbed) OR (price=varprice AND beds=varbed AND type=vartype) OR ( location=varloc AND type=vartype AND beds=varbed) OR (price=varprice AND location=varloc) OR (price=varprice AND type=vartype) OR (price=varprice AND beds=varbed) OR (type=vartype AND location=varloc) OR (type=vartype AND beds=beds) OR (location=varloc AND beds=varbed) OR (price = varprice OR beds=varbed OR type=vartype OR location=varloc)
ORDER BY detailstable.trueprice ASC
Look forward to receiving your thoughts,
Linda
Date: Wed, 21 Oct 2009 14:36:33 -0600
From: [email protected]
To: [email protected]
Subject: how to filter results from 4 dynamic list menus depandant on how many of them are selected
Hiya,
I'm just doing my first dynamic site too, and am at a similar level to yourself.
Can you give us more info re the site. What software, eg Dreamweaver etc are you using, and is your server using PHP or ASP etc?
For what I've used, I amended the SQL side of things in the recordset in Dreamweaver. That way, you can test the SQL as you're setting up the recordset.
Let me know how you're going on anyway
Cheers
Andy
>

How many faces (people) are recommended to "teach" iPhoto '11?

Similar Messages

Maybe you are looking for