How many foreign trade orgnisation we can assign to one company code

Dear Experts,
How many Foreign Trade Organisation can assign to one company code .
I would like to understand concept of creating FTO's .
Thank you
Krishna

Hi Krishna,
Regarding the concept; documents and transactions in GTS are carried out within a single Foreign Trade Organisation.  Together with the Legal Unit (more-or-less corresponding to "Plant"), they provide the key to many of the attributes and characteristics for the transaction, and for reporting purposes.
For technical convenience, the FTO takes the form of a Business Partner, so has Name & Address attributes and is tied to a single country.  It is reasonable to consider the FTO as representing the Legal Entity, so mapping to Company Code is provided.
Hope that helps.
Regards,
Dave

Similar Messages

  • How many non-leading ledgera we can assign to the one leading leder?

    hi,
       how many non-leading ledgers we can assign for one leading ledger..?

    Hi Vijaya,
    1)The number of iViews that you add to a Page depends on the Page Layout that you use and your requirement. Adding too many iViews to a page will make the Page look too filled up.
    You can arrange the iViews in a Page by selecting an appropriate Page Layout and then adding iViews to it.
    2)Normally, we create iViews and assign them to a Page, page to a Workset, workset to a Role and that role to a User.
    Yes, u can assign an iview directly to a workset but then a page can contain all related iviews together and then that page can be added to a workset. Adding each ivew to a workset is not recommended.
    By adding iviews to a page you can determine the arrangement of the content by selecting a layout from among different predefined layouts. You dont have this option in workset though.
    Please reward points if foung useful.
    Regards,
    Becky.

  • Is there a limit to how many MS personalized domains you can have under one live account?

    Microsoft personalized domain names for anywhere access
    I have setup two separate essentials servers “anywhere Access” using my own Live ID account.
     Server1.remotewebaccess.com and server2.remotewebaccess.com Both work perfectly.
    Is there a limit to how many MS personalized domains you can have under one live account?
    Staple Bench Computers

    I think it is five
    Grey

  • How many character my iphone 4S can send at one time

    How many characters my iphone 4s can send at one time?

    A lot.  I'm not aware of any upper limit in an iMessage.
    For text messages, that would be a function of the carrier, I would think.
    And if you did send a message that was longer than the maximum amount ofr a single message, it would simply break up into two smaller messages.

  • How many records does JDBC adapter can obtain in one polling?

    Hello everybody,
    I need to do an interface between legacy system and SAP ECC, the legacy systems have a DB so i use the jdbc adapter (sender) and receive the information to SAP ECC with proxy, so i need to activate the polling option from my jdbc adapter working as a sender, i read a table with lot of records, and i need to know how many records does jdbc adapter support when the polling is executed, because is necessary read all records from the table and change the status of the processed field.
    Is possible to get all the records from that table in one polling interval (50,000 records aprox)?, or i need to do the polling by blocks of records until finish all records from the table?, the second option, i dont have idea how can i do it.
    Regards,
    Vicman

    Hi again!,
    i still working on that, but i have a question, is possible to handle Store Procedure in jdbc adapter?? is supported?, like PL SQL, because i was working in the next query but i don't know if it works and where do i need to locate the query in the Query SQL Statement or in Update SQL Statement field or both? but how?.
    DECLARE c_cursor CURSOR FOR
    SELECT * FROM tablename
    WHERE processed=0
    OPEN c_cursor
       FETCH NEXT FROM c_cursor
    WHILE @@FETCH_STATUS = 0
    BEGIN
       update tablename set processed=1
       FETCH NEXT FROM c_cursor
    END
    CLOSE c_cursor
    DEALLOCATE c_cursor
    Regards,

  • How many BW 7.3 systems can be connected to one HANA database?

    Hello Gurus,
    For Development,Test and sandbox environments customer likes to share one HANA database for multiple SAP BW systems.
    So how many BW 7.3 systems can be connected one HANA database (ofcourse on single HANA appliance)?
    Can i install multiple HANA Databases on single HANA hardware?
    Can someone help me on these questions.
    Thanks.
    Srikar

    Hello,
    i would suggest reading this blog:
    How BW-on-HANA Combines With Native HANA
    sap_user_union_001 wrote:
    Today, HANA 1.0 SP3 was released.
    I was not able to find it in downloads - are you sure it is already released?
    sap_user_union_001 wrote:
    You can connect as many systems as you want with the HANA (also 3 BWs).....The problem is, that you only have 1 system, which is able to put the data real-time into the HANA via SLT...the other systems will load their data via ETL into HANA...
    I am not aware about any such restriction. It should be possible to have as many SLT systems replicated as you like. Can you explain why only one SLT is possible?
    Tomas

  • How Many Foreign EoIP Tunnels Does 5508 Support?

    Hi forum,
    I'm speccing out a guest anchor design and can't find any explicit information for the 5508 regarding how many foreign WLC EoIP tunnels it can support.
    This information for the 2504 is on the data sheet (15) but not on the 5508 data sheet!
    Any help greatly appreciated, and given full stars

    Osita is correct.
    Just to add... Here is a link that explains it. Also if your going to reach that high of a number, you also have to understand the max client count on the 5508 (7,000) and the max database size for username/passwords if that guest WLC will handle guest accounts (2,048). This database limit includes local user and Mac filters also.
    http://www.cisco.com/en/US/products/ps6366/products_qanda_item09186a00809ba482.shtml#qa2
    Sent from Cisco Technical Support iPhone App

  • Can i assign one vendor to more than one company code how?

    can i assign one vendor to more than one company code how?

    Hi,
    If u create vendor in XK01 then there will be three segments which are general data, company code and purchasing organziation data. General Data will be available at client level so that u can use the vendor across company codes just what u need to do is that u have to give the company code data when ever u r creating for a new company code.
    regards
    srikanth.

  • Can i assign one customer to more than one company code how?

    can i assign one customer to more than one company code how?

    Hi
    First Create the Customer Centrally in XD01 and then extend the same Customer in FD01 for the required company codes.
    Regards
    Venkat

  • How many sets of wireless headphones can I connect to my iPad at one time?

    How many sets of wireless headphones can I connect to my iPad at one time?

    Did you mean Bluetooth? One. Did you mean FM or infrared, driven from the 3.5mm output jack? Any number of them, assuming you use the same frequency to receive the stream.

  • How many different binary search trees can store the keys {1,2,3}

    I am having a hard time answering this question:
    How many different binary search trees can store the keys {1,2,3} or how about {1,2,3,4} and how did u figure this out?
    Any responses helpful
    Thanks!

    the.maltese.falcon wrote:
    practissum, shame on you for doing this chap's homework for him. @ the OP, this is a Java forum, not a basic data structures forum.
    Also, you forgot the cases
    3
    1
    2and
    1
    3
    2
    the.maltese.falcon, I was just trying to help him get started with the base case. Notice that I didn't enumerate all of the possibilities, but was trying to help the OP get on the right track. You, however, have done this. So shame to you, sir!

  • How many types of reports we can see in BI..?

    Hi
    I am new to BI
    How many types of reports we can see in BI..?
    I got some here like
    1) COPA reports
    2) Costbased reports
    3) Artist p& L
    4) HMF test...export active sheet....export shole wb..
                          Upload
    PABEL
    NPS...
    i wanted to know what is PABEL
    NPS...etc..? how many are there...?
    please help me guys..
    thanks for any information,,
    praveen.

    Hello,
    Not sure what all of those are so you likely need to post your question to one of the classic SAP Forums:
    http://forums.sdn.sap.com/index.jspa?categoryID=1#16
    Or
    http://forums.sdn.sap.com/index.jspa?categoryID=1#44
    Thank you
    Don

  • How many partitions and operating systems can you line up in BootCamp?

    A quick question, hopefully with a quick answer.
    How many partitions and operating systems can you line up in BootCamp?
    Are we limited to just 2, or can we have more?
    Say, for example, Mac, Win XP, Win Vista and Linux maybe?
    Thanks in advance.

    VPC does not run on Intel Macs. If you wish to use virtualization on an Intel Mac see this:
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
    2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
    3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
    5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not yet fully developed for the Mac - some features are not yet implemented - but it does work otherwise.
    6. Last is Q. Q is a freeware emulator that is compatible with Intel Macs. It is much slower than the virtualization software, Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
    See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion.
    Boot Camp is only available with Leopard. The Boot Camp Beta that was used with Tiger has expired and is no longer available for use. So contrary to the other poster's comment, Boot Camp isn't truly "free." You must purchase Leopard to get it.
    You can upgrade XP to Vista without having to make any changes to the Boot Camp partition. Vista can either perform an upgrade install or erase the Windows volume before installing Vista. You don't need to do anything to change the partition via Boot Camp. However, if you need to enlarge the partition, then the only way that can be done is to first use Boot Camp to remove the partition. Then use Boot Camp to make a new, larger partition. All data from the Windows partition will be lost.

  • How to khow how many foreign key are referenceing the primary key

    sir i would like to know that how many foreign key are referencing the primary key of a table
    is any command to know the table name
    please suggest
    thanks in advance..

    In the query below, table_name is the name of the table whose primary key is referenced.
    SELECT b.owner owner
    ,b.constraint_name foreign_key
    ,b.constraint_type constraint_type
    ,b.table_name referencing_table
    ,b.r_constraint_name primary_key
    ,c.table_name referenced_table
    ,c.column_name referenced_column
    FROM all_constraints a
    ,all_constraints b
    ,all_cons_columns c
    WHERE a.owner = b.owner
    AND a.table_name = :table_name
    AND a.constraint_type = 'P'
    AND b.r_constraint_name = a.constraint_name
    AND b.constraint_type = 'R'
    AND c.constraint_name = a.constraint_name
    AND c.owner = a.owner;
    If the name of the primary key is known, the query below
    select * from all_constraints where constraint_type = 'R' and r_constraint_name = :pk_name

  • How many parallel BPEL child processes can be invoked on single BPEL server

    Hi,
    Can anyone pls let me know
    1. How many parallel BPEL child processes can be invoked on single BPEL server at same time?
    2. How number of Invoker threads, Worker threads and DB connection pools are affecting the BPEL server's listener thread spawning capacity?
    Thanks in advance.
    -S

    Hi James
    Here is my problem. I need to do this for load balancing. I have two instances of SOA Suite running on single machine, i.e. two different BPEL servers. Now i need 2 BPEL instances on each server, i.e. two SOA Suite and four BPEL instances (Two BPEL servers on each SOA Suite)
    I tried to create a new OC4J instance on my app server and named it as OC4J_new. By default OC4J instance would have these application installed:
    ascontrol
    ccore
    coreman
    datatags
    default
    esb-dt
    esb-rt
    gateway
    hw_services
    javasso
    orabpel
    orainfra
    policymanager
    ruleauthor
    rulehelp
    But when i create new OC4J instance, i can see only these applications:
    ascontrol
    datatags
    default
    javasso
    How do i get rest of the applications in my new OC4J Instance??
    I tried deploying .EAR files but it failed all the time. What are possible fixes?
    Many thanks in advance

Maybe you are looking for