How many formulas support numbers at ipad?

When import spreadsheet from mail, the sistem showme the folowing message, "The spreadsheet contains more formulas than are supported", What i can do?

Apfelwurm,
I believe that this is the proper place for this question, as it appears to be specific to the iOS version of Numbers. Helpers in the OS X iWork forum are not likely to know much about the iOS version.
Jerry

Similar Messages

  • How many time must charge an ipad mini, first time ?

    How many time must charge an ipad for first time ?

    None. If there is a good charge in the battery when you get it go ahead and use your pad. I use my iPad during the day and leave it to charge overnight. If I use too much battery during the day I'll charge it again.

  • How many clients support access points 1602, 2602, 3602?

    Hi! How many clients support access point 1602, 2602, 3602. I have found for example that the 1602 supports 32 ClientLink clients and max 128 clients, APs 2602, 3602 supports 128 ClientLink clients and max 200 clients. But is it really? And can we say for example that the AP 2602 will withstand max 200 clients?

    The reason the answer varies so much, is because there are so many variables (this is also why the value ranges so much from one manufacture to the next).  When determining the answer you are looking for you need to consider the following factors and likely more:
    AP model and the features it supports
    single, dual, or tri radio AP
    20, 40, or 80Mhz wide channels
    Device type (b/g, b/g/n, a/b/g/n, a/b/g/n/ac, spatial stream support, and channel width support)
    Security/QOS method(s) employed
    Average distance from the AP
    Obstructions between devices and radios
    Number of competing radios for the same channel
    Data rates configuration
    Rogue detection/mitigation configuration
    Surrounding client density not just the area of concern client density
    Noise floor levels
    Application types/per user network load (is it heavy like YouTube traffic or a drone on the network like Pandora)
    Network latency on the switching side - including the internet circuit
    Application of per SSID, per user, and or per application rate limiting
    The list continues, but I think you get the idea
    I have personally seen 80 devices on a 5Ghz radio of a 3500 access point with several other access points and at least 200 other clients in the area and it was working well.  That being said I would never design to expect that many on a single radio, but I think it is better said that you can safely design for 20-30 clients per 2.4Ghz radio and 25-40 clients per 5Ghz radio.
    The default statement of 20-25 per AP and similar low expectation statements concerning Cisco wireless have been around for many years.  It is now 2014.  About 65% of clients support 5Ghz, ~9% support AC (already), ~90% support some form of N, and ~0.01% support B only.  The landscape of wireless is changing fast making questions like this one have ever changing answers.
    I hope this helps :).
    John

  • How do u limit how many emails u get for ipad 2?

    how do u limit how many emails u get for ipad 2?
    I don't want ALL my emails at once. you used to be able to set a limit (50,100,200) emails.
    now there is no setting and its eating up my battery on my ipad 2

    Unfortunately, you cannot. You can change the setting from 'push' to 'fetch' which means it'll only reach out and download mail when you tell it to, which should help your battery. You do that in the settings panel.

  • How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart

    How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart. We need connect by  Adobe Encoder many people. what is differences between Adobe Media Server 5 Professional, Adobe Media Server 5 Standard and Adobe Media Server 5 Extended?

    For the detailed list of differences across editions refer this link
    http://www.adobe.com/in/products/adobe-media-server-family/buying-guide-comparison.html

  • How many apps will a 32gb ipad mini hold?

    how many apps will a 32gb ipad mini hold?

    There's no way to give a number since it depends on the size of the apps. Some are quite small, but some take up a lot of space. I have apps as small as 7MB and some well over 300MB, and I'm sure those are by no means the largest apps that exist. So there's no way we can really answer your question other than to say that after taking into account the amount of space the OS and bundles apps take up and the difference in how the capacity is listed between technical specs and what an operating system can use, a 32GB iPad will have about 28GB of usable capacity.
    Regards.

  • How many books can a 16go IPad hold?

    How many books can a 16go IPad hold?
    JF

    Lots and lots and lots. Easily into the thousands.
    I have about 75 books on my iPad and have used less than 20mb so far.

  • HT5622 How many family members, computers, iPods,iPad,IDs can you have on one iTunes account?

    I'm just trying to sort out some iTunes I'd issues.  Does anyone know how many total iPad iPods can be used with one Apple ID?  Or how many apple  IDs your can have with one iTunes account? Or does each person need there own Apple ID or Apple account? Thanks

    You can't have multiple IDs on one account, but you can use multiple IDs for different purposes on the same device.
    Just use the one AppleID for iTunes and the AppStore so you can all share your music and app purchases. Then each person should have their own individual AppleID with associated iCloud account for mail, contacts, calendars, iMessage and FaceTime.
    You don't have to use the same AppleID for all services.

  • How many times can you connect ipad to a different computer?

    I have an Ipad 1 and when connecting it to my new laptop (not Mac) it told me the device could only be connected one more time to a different computer. Are there limits on Ipads as to how many computers or times we can connect them to? Is there any way to reset this or not?

    When it comes to apps, this is right, unless you use the Windows version of iFunBox (the Mac version, not even the latest version, doesn't work for direct IPA transfer). However, you can transfer / sync music / videos from several computers using third-party tools (without jailbreaking!!) with tools like SyncPod / FreeSync.
    You may want to read the section "A side remark: put music / videos / other media on your iDevice without iTunes" at http://www.iphonelife.com/blog/87/ios-contact-management-duplicate-removal-impor texport-etc-tips-and-tricks for more info.

  • Cores,  how many are supported by After FX CS3 on win vista?

    Hi folks,
    do you know how many cores are supported by after fx CS3?
    I am able to use a dual xeon quadcore workstation with 8 cores and 24 GB Ram for my diploma, but I don't know if this hardware is supported by CS3?
    It is the Xeon 5355 Quad Core 2,67 Ghz on dual 771 socket mainboard from Tyan. The OS is Win Vista Premium 64bit.
    Does anyone of you have further information if this is doable?
    Thanks a lot in advance,
    Roman

    Each instance of AE can only access a maximum of 4 GB of RAM (on Vista64). With the "Render multiple frames simultaneously" option in the preferences, AE CS3 and later can start several hidden copies of itself in the background, which can each address that maxmium amount of RAM, so your machine would ideally use 5 processor cores (5 x 4 = 20 GB and leave 4 GB for the OS.)
    In CS4 you can set the number of cores to use, in CS3 you have to do it via a text file, detailed in this post:
    i http://generalspecialist.com/2007/02/troubleshooting-after-effects-7.asp (look for "MaxNumberOfProcesses")
    PS. On OS X, each instance can address 3.5 GB and on Windows XP and Windows Vista 2 GB (or 3 GB if you are adventurous:
    i http://generalspecialist.com/2006/05/using-more-than-2gb-of-ram-in-after.asp )
    - Jonas Hummelstrand
    http://generalspecialist.com/

  • How many VLANs supported via MACsec VLAN-trunk link?

    Hi,
    Any one know how many VLANs maximum allowed across a MACsec link between two C6500 with Sup2Ts or between two N7K respectively?
    As far as I know, C3750X has limitation of 8 VLANs, according to
    •Cisco TrustSec enforcement is supported only on up to eight VLANs on a VLAN-trunk link. If there are more than eight VLANs configured on a VLAN-trunk link and Cisco TrustSec enforcement is enabled on those VLANs, the switch ports on those VLAN-trunk links will be error-disabled.
    http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-0_2_se/configuration/guide/3750x_cg/trustsec.html
    Thanks,
    Cedar

    Hi,
    Any one know how many VLANs maximum allowed across a MACsec link between two C6500 with Sup2Ts or between two N7K respectively?
    As far as I know, C3750X has limitation of 8 VLANs, according to
    •Cisco TrustSec enforcement is supported only on up to eight VLANs on a VLAN-trunk link. If there are more than eight VLANs configured on a VLAN-trunk link and Cisco TrustSec enforcement is enabled on those VLANs, the switch ports on those VLAN-trunk links will be error-disabled.
    http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-0_2_se/configuration/guide/3750x_cg/trustsec.html
    Thanks,
    Cedar

  • How many movies can a 16G iPad hold

    I am thinking of buying an iPad and use it just for playing movies.  So can anyone tell me how much movies does a 16GB iPad hold?

    Rudegar, a new, out of the box iPad only has about 13+ GB free space, so you can't install 16 ea 1GB movies. Plus if you use all the available space, you won't be able to install any apps, music or pics.
     Cheers, Tom

  • How to drag formulas in numbers on iPad

    Not seeing the drag handle as on a Mac to drag formulas. Is this possible on an iPad?

    Don't forget to mark your answer "solved" for the complete experience.
    quinn

  • Need help with formula in Numbers for iPad 2

    I have a spreadsheet with a formula such as b2 x c2  very simple.  However, if the formula cells (b2 and 2) are blank then the destination cell contains a zero. How can I make my destination cell b blank while the formula cells are blank? I got thsvresponse from a person working with Mac os x, if this helps...
    I can't seem to make this work in my formula bar on ipad2!
    =if(isblank(<source cell>), "", <What ever your formula is>)
    Thanks for any suggestions!
    iPad 2

    Your friend was close, but forgot one thing. If you want it to be blank if either cell is MT, then you need an OR as well o test if either one or the other is blank...
    =IF(OR(ISBLANK(a1),ISBLANK(b1)),"",a1xb1)
    The isblank can also be represetned by ="" in many cases, usually accompanied with a trim to make sure there are no spaces were entered...
    =IF(OR(TRIM(a1)="",TRIM(b1)="")),"",a1xb1)
    Jason

  • Where is the official reference to know how many MBs of RAM does iPad have?

    Hi guys,
    I have read discussion here and get to know that iPad has 256 MBs of RAM, but the discussion is user-to-user discussion. I want to know that is there any official reference to point that how may RAM in all types of iPad machines?
    Thank you very much!

    Welcome to the discussions. Since the amount of RAM is not mentioned in Apple's own specs here:
    _iPad - Technical Specifications_
    ...click here:
    ...It says: +"Memory: 256 MB DRAM built into Apple A4 package (top package of PoP contains two 128 MB dies)"+ ...From THIS teardown.

Maybe you are looking for