How many frames in Flash

Hi can i know how many frames in flash... i want to animate
some of things extended to 23000-60000 frames...
i placed movieclip in the first frame and tht animation upto
23000 and the second one starts from 23001-60000, how can do this
one.. plz help me
Thanks

The magic number is 16,000. Check the tech note here:
http://www.adobe.com/go/tn_14437
Cheers!

Similar Messages

How many frames of animation does support flash

Hi can i know how many frames in flash... i want to animate
some of things extended to 23000-60000 frames...
i placed movieclip in the first frame and tht animation upto
23000 and the second one starts from 23001-60000, how can do this
one.. plz help me
Thanks

The magic number is 16,000. Check the tech note here:
http://www.adobe.com/go/tn_14437
Cheers!

Why doesn't the "View image info" show how many frames are in animated gifs?

When I right click on an image, then click "View Image Info" it used to show how many frames were included in an animated gif. This stopped working in Firefox 4. Why is that?

I'm not too sure what I did but it works now.

How many frames should I cut out each second to get a old film look?

Hi,
What is the general rule of thumb (if their is one) of how many frames should be cut every second to achieve a choppy old film look? Or maybe it's not every second? What do you guys do?

you will get a more realistic look if you chop out frames manually
dump the playhead arbitrarily on the time line insert a cut nudge the playhead either i or 2 frames on and cut again discard the frames and either leave the black or butt the clips up for a "skip".
this really doesn't take long to do and is better than a predetermined sequence of chops made by a filter.
CGM do a free filter for aged film to add the hairs, navel lint, boogers etc . .

How many frames is the average animated card

I'm creating an animated holiday card for my company website and I am fairly new to Flash. What is the average amount of frames to use for this and should it be 24 or 30 fps?

The fps can be whatever you prefer - 24 versus 30 ... either is fine.
I doubt you will be getting an answer regarding the average number of frames in a card animation. Animations can vary between 1 (code based)) and thousands of frames.
If you give a description of the animation you intend to create a guesstimate might be possible

Re: How many frames per second (fps) has 3120 clas...

I've read in other sites that it performs 15 fps, but I'm not sure...
Solved!
Go to Solution.

not possible to record at less than 15fps. there is no way that the 3120 classic supports video recording of 640x480, or even 320x240 for that matter. i have a N78, and it records 640x480 at 15fps, its a bit choppy at times since its not 30fps recording like other N series, but it does the job reasonably well. there's no 30fps recording on Series40 devices as of yet, so 15fps will have to do for now . but 6303 looks good
please throw some kudos our way, it would mean a lot to us
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

Has anyone been able to contact Adobe to learn why their Flash Player does not work on Mac OS 10.6.8, no matter how many updates you install? This seems like a big error by Adobe.

I have thee Mac computers with Mac OS 10.6.8, one of which is a Mac Pro. No matter how many updates I install from Adobe, their Flash Player does not work on any of these 3 computers. I don't know how to contact Adobe Systems about this problem, but I think it is their responsibility to make sure that their so-called "universal" software works proplerly on a relatively recent operating system like OS 10.6.8 that is still in widespread use. When you install the updates, nothing happens -- not even an error message. What is the point of a universal player that is not universal? It works fine on my MacBook Pro with OS 9 Mavericks, but it does not work at all -- indeed, has never worked -- on my 3 Macs with OS 10.6.8. Has anyone contacted Adobe Systems to find out why the Flash Player does not work with OS 10.6.8 and what they plan to do about it?

Where are you getting Flash from?
Get the appropriate dmg installer here and then run it.
http://www.adobe.com/products/flashplayer/distribution3.html
If it still won't install, do these two things: First uninstall any Flash by going into the second level Hard Drive Library>Internet Plug-ins, and trash the Flash Player.plugin and flashplayer.xpt. Then boot into Safe Boot, Shift at the startup chime (give it much longer than a usual boot) and run the installer while booted in Safe Boot.

How link from html page to a specific frame in flash cs5 as3

Hi!
I'm kinda new around here. I am interested in knowing how to link from a specific html page to a specific frame in flash cs5 as3.
I have a website that I originally began to design in flash but later started developing new pages for it in html. The flash part of it has several pages on different frames and I have created links from the flash part to the other html pages, but, I can only link the html pages back to the main flash home page, and not the other pages in the flash part of the website.
I have read that in cs3 it was possible using the flashvars skip variable, but I don't know how to do it. I have not yet seen any working examples and I could not find any instructions / tutorials online for cs5.
Can someone help here?

add a query string, to the swf's embedding html, with variable/value indicating the frame you want to display in your swf. add a javascript function to return the query string (or entire url), call the javascript function from flash using the externalinterface class. and finally add code to your swf to parse the returned url or query string, parse it and then direct your timeline to the appropriate frame.

How can i customize flash player to open frames in new windows ??

how can i customize flash player to open frames in new windows ??

In case you haven't solved this, this document might help:
http://helpx.adobe.com/flash-player/kb/create-pop-browser-windows-flash.html

Cannot get flash player to work no many how many times installed

I am using window 7, 64 bit op system, service packet 1, right now, flash player is uninstalled. i have installed and uninstalled it over 40 times in the past 3 months. i cannt get it work no matter how many times i try. any sugestions?

i am using IE 8, i have not uploaded IE 9. every time i go to youtube, or nascar or fox news and try to watch a video it tells me to upload Flash Player. i went to Adobe's site, downloaded uninstaller to make sure i am not messing things up. i uninstall flash player, reboot then go to Adobe web site and download the most current flash player. after downloading, i install and after instalation i reboot. i go back to said web site and i still get the same thing, i need to install flash player. is there anything i can do? thank you Michael

How many Disk do we store Flash back on?

We used oracle 10G,
we have archive logs 26G/day
we think of flash back on.
How many disk do we store flashback files?
Please help us for informations, when we need oracle flashback?

Are you asking about raid levels? If you are only copying your archive logs to one destination, then you should at least have your archivelog disk mirrored, if not a higher raid level like level 5. It would be advisable to archive to multiple locations. Remember, if you lose one of your logs before they can be backed up, you will lose data if you have to perform a recovery. The amount of disk space you would need would depend on how many archive logs you intend to keep available on disk. Also, are you using the flashback area for your rman backups? You would also need to have additional space for each of these backups you want to have available on disk. Remember, you can always backup archivelogs to tape and delete them.
My general rule of thumb is that I like to only use up to 60% of a disk available for logfiles. This way if you have a large spike in DB use for a period of time you are not going to quickly run out of space. In this example if you generate 25G of archive and you want to keep 5 days worth, then you would generate 125G during this time period, I would probably want to have 200G of disk available to give you 60% normal usage.

SFE 2000 how many flash and RAM : MB ????

Hi every one
Who can tell me the Cisco Linksys SFE 2000 have :how many flash and RAM : MB ????
Best regards
Zammit Ikbel

This is not Apple Support, nor are they able to be contacted by e-mail. This is a user to user forum, and we can try to help you as best as possible. Apple moderators can move your thread to a more appropriate forum if needed.
A faster hard drive connection is available through your Thunderbolt port. See what you can connect via Sonnet's adapter:
http://www.sonnettech.com/product/echoexpresscard34thunderbolt.html
An eSATA or Thunderbolt hard drive would probably be at least faster than the internal drive, and an external SSD may be cheaper than an internal for your notebook, and even faster.

How do I make Flash use the original Photoshop file, not a .png one?

Hi, this might be kind of a basic question/problem but I can't seem get Google to help me. Since I've recently started out with Flash, I guess I just missed some newbie thing out, still very greatful for help though, since this'll soon be causing a brain hemorrage...
Ok, here goes:
I'd like to draw key frames in Flash, just simple drawings/skelettons using the pen tool, basically to create the movement itself. After that, I want to export the frames that I drew as images to Photoshop in order to apply texture and colour, and then put them back into Flash again, without tampering with the Flash doc I've already created, since the animation is already done. I want the file(s) that I'm working with to remain the same files throughout the process, from Flash to Photoshop and back to Flash again, like the way InDesign works. Is this even possible?
If this isn't possible at all, I guess the alternative is to draw in Photoshop and then import the drawings into Flash, put them in order and then make any eventual changes after you've created the animation in Flash, this is less smooth though still possible. But here emerges (sort of) the same problem:
When I import images from Photoshop, create animation out of them, and then realize I have to make some changes in the original PS pic file I head back to PS to correct it. But it just doesn't work the way I want it to... If I modify the pic file in PS, then use the "update" alternative in Flash Library, Flash just tells me that the file can't be found, and does not update the image. If I choose the "edit in PS"-alternative from right clicking on a symbol that is in the library, the file opens as a .png file in PS, not as my original file! It seems to me that Flash is creating its own library, not using the existing document. Is there anyway to go around this? How do I make Flash use my PS file which allows me to change it as much as I want (as with InDesign)?
This is driving me crazy, what I'm working on is supposed to be full HD, I can't use a freaking .png file... Gah!
Very many Thanks in advance!
(If anyone has any suggestion for alternative software, that's also very welcome!)

If you start the artwork in Flash, you are starting with a vector drawing. If you export this art as a .png so that you can edit it in Photoshop, you will be translating the artwork to a bitmap image at a specific resolution. When you edit this .png in Photoshop, you can save it, as a .png, and then import that .png into Flash.
After you import the .png, place it on the stage in a new layer. Position the new artwork over the old artwork. Then throw away the original artwork. Now, when you want to edit the artwork, go to the original file in the movie's Library and select Edit with Photoshop. When you save the file in Photoshop, the updated file will appear in the Flash movie.
If you have Illustrator, you can export your original artwork as an Illustrator file. Then you can open this file in Illustrator, edit it, and save it. Then, as above, import the .ai file into Flash and toss out the original. Now you can edit the original file through the Library in your Flash movie.
Alternately, you could start by creating the artwork in either Photoshop or Illustrator. Then import that art into Flash. Now you have a link to the editor for either file in your Library. This may simplify things.
Working with Photoshop and/or .png files will give you a larger finished file than working with Illustrator files. In either case the finished resolution of the Flash movie will be the computer's screen resolution, 72 ppi.

How many concurrent streams can my server handle?

I am trying to serve streaming video over a 10 mb network and using Adobe® Flash® Media Streaming Server 3.5. Here are the specs on the video.
Video:
Codec: On2 VP6
320x240px
frame rate: 30fps
400 kbps (VBR)
keyframe distance: 15
Audio:
Mono channel
96 kbps
Does anyone know how many of these I could serve up concurrently? Or is there a spec somewhere?

It might be that straightforward question to answer because your network might support "x" mbps but your server configuration including CPU,Memory,Network card you have.
If you need to do simple calculation (considering you have calculated your bandwidth for video and audio individually) it would like one client would take around 496kbps. Now that means roughly 2 clients will take 1 Mbps so 20 clients will eat up 10Mbps - so at given point of time only roughly 20 clients would be able to play stream without much of rebuffering issue.
Any number of clients would be able to connect and play but more the clients quality of service for each client might start degrading , they might start getting insufficient bandwidth messages.

How to Edit a flash file

Hi all,
I have a flash file, which I took from my website and want to
modify some of the contents and links in the flash file. I
installed "Macromedia Flash 8" and open the flash file; after
opening all I can see in the menu bar of my flash is "File, View,
Debug and Control" and could not find any control or tool to edit
the file and surprisingly rest of the other macromedia toolbar
icons are disabled. I need to know from where to start - How to
modify my flash file.
Your help is highly appreciated.
Thanks in advance
AP

quote:
Originally posted by:
Purplehaze
Also the file I am having trouble with is from a Template
that I got from my Host it is suppose to be made to be edited I
have both the files. I would still need the decompiler?
I do not know what files you have, 'fraid I cannot answer
this
My Friend
I think you need to check out some of the books, online
tutorials, course etc pertaining to Flash. Build up your knowledge
a little at a time and you will surprise yourself at what you can
achieve, you would also probaby build your own web apps and not
rely on templates.
There are many good folk on here that would help you with
your projects - go out and explore it - it's exciting - good luck

How many frames in Flash

Similar Messages

Maybe you are looking for