How Many Hard Inquiries do you guys have?

I've got 24, and it pains me to say more than half of these won't fall off til 2017
Horrible I know. Anyone else have me beat? Come on, no shame here.. spill it

CaliBrah323 wrote:
I've got 24, and it pains me to say more than half of these won't fall off til 2017
Horrible I know. Anyone else have me beat? Come on, no shame here.. spill it Everything is over a year old EQ - 5EX - 2TU - 5

Similar Messages

Is there a limit to how many MS personalized domains you can have under one live account?

Microsoft personalized domain names for anywhere access
I have setup two separate essentials servers “anywhere Access” using my own Live ID account.
Server1.remotewebaccess.com and server2.remotewebaccess.com Both work perfectly.
Is there a limit to how many MS personalized domains you can have under one live account?
Staple Bench Computers

I think it is five
Grey

How many hard drives can you stuff in the MDD?

I know Apple supports 4 drives, but I'm sure it's possible to shove more in, is there?
The G5's can stuff lots of drives with the little amount of space they have..

AJ must be using tri-focal lenses or those
stereo-optical 3Ds ;-))
Or an alternate reality.
Hey now, thats my hometown you are talking about!
I have a 200, 2x80s raid, and a 30 in my MDD. Thats 4.
The 2x80s are in the front bays. The 200 & 30 are each on a single carrier in the bottom of the case.
The raid and the 200 are hosted by the Sonnet card. The 30 is on the motherboard.
If I trade out the flat carrier for H bracketes, I can get 2 more drives in there.
ummm...ok, thats 6, not 5. (public school math, what can I say? )
Now dump the optical drives, and you can have 2 more. You can connect them to the motherboard conroller (but they'll be slow) or add another controller card.)
So 8, assuming you have a 3rd party controller or two and a couple of 3.5->5.25 adapter brackets, a couple of Y power cables, and verify the power supply can feed it all, you can get up to 8 HDs in an MDD case.

How many hard drives can you put in a pavilion p2

Can I put one or two more hard drives into a Pavilion p2 1122? Is there a particular spec or physical size that this must be?
This question was solved.
View Solution.

Your HP Pavilion p2-1122 Desktop Computer only has space for one hard drive in it... the one installed at the factory. The only way to add any more drive internally, is to remove the CD/DVD and use that space, or to fabricate and install a drive cage... room permitting.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How many hard drives should i get to get the most out of premiere on my laptop?

Hello,
I have a 15 inch Macbook Pro Late 2013 with 512gb ssd, 16gb ram and 2gb 750m graphics card. I was wondering how many external hard drives i should get to get the best results in Premiere Pro and After Effects. I'm thinking about buying a smallish portable hard drive for cache and another for media. How many hard drives do you think i should get, what size they should be and how it would improve Premiere and After Effects please.
Thanks Heaps

I agree with JFP...above. But if you have a USB3 interface on that MacBook, you can also try using it as I have on my PC laptop
For simplicity on my PC laptop I would just go with a fast USB3 flash drive for the project and media files. I have several PNY Turbo USB3 128GB units and have recently edited a 1-hour long three AVCHD camera shoot (not multicam mode) with perfect ease. That way you do not have power cables from hard drives. I suspect that the new SanDisk Extreme Pro will match those speeds below but at a much higher cost ($140 versus $50). Never believe the manufacturers speed claims here are real achievable results on the PNY.
That read speed is better than most hard disk drives as it does not fall off as the storage device gets full, and the access time is significantly better despite significant USB overhead.

How many motions tweens can you have on a timeline?

I'm a college student in Seattle. We just had our mid-terms in Flash CS5. One of the really simple questions was "How many motion tweens can you have on a timeline." Yup. The answer is one...... or is it? I had a long discussion with my tutor (who is the greatest tutor in the world) and he wanted to think about it. I said to him that I thought that one motion tween was wrong because you can click on an object in the timeline, make it a motion tween, and double click it and make several motion tweens. So, essentially, you can have more than one motion tween on a timeline. Is anyone able to advise me because this is all about grades!

You can have quite a few motion tweens on a timeline. You can even have them happening simultaneously (I don't know of a specific limit), as long as they are all on their own layers. Though the more you add simultaneously the more they can weigh down the speed of things running.
If you need to prove this to someone, the easiest way is to create it and demonstrate it. But you may want to check the exact wording of the question... it would not be beyond an examiner to throw a trick question in.

How many ADFS farms can you have in a single forest/single domain?

Hi
I may have some terminology incorrect...please let me know if I do. :)
My question is, how many ADFS farms can you have in a single forest/single domain? If you want to know why I am asking...please read on.
We have 1 ADFS Farm and we are looking adding services to it. However not every cloud vendor provides a "Identity Broker" with there services.
We have a consultant that is advising that we need to enable a SAML-based IdP-initiated single sign-on (SSO) ie using "IdpInitiatedSignOnPage"
However to do this we need to modify the ADFS website to have "drop down" list so the user can select the "Relying Party" and then authentication with them.
This means we are exposing a list of every company/party we have federated with. The exposure of this information, is deemed a security concern by our company....which I agree with.
So the consultant advises that we need a separate ADFS farm. I have searched online, but haven't found any information that confirms multiple ADFS farms can be implemented in a single forest/single domain.
Thanks for reading and if you have any other suggestions...I'd appreciate it.
Nyobi

This is not exactly FIM related question - there is ADFS forum available on Technet. However - technically there is no limit of ADFS farms in a forest \ domain. It is just a service which uses AD and is not altering it in any way or storing some forest-wide
information like Exchange. So you can setup two ADFS services in single forest - no problem.
If it is a best solution to your problem? I can't say with that limited information but maybe just customization of pages on ADFS side would be enough?
Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl

How many message filters do you have ?

I don't know if that question has been asked before?
How many message filters do you have set up on your Ironport?
Thanks
Arnaud

Hi "Community", (or are we still a "Nation"?) :-)
Since one of the "conflating responses" was mine, I like to complete my answer:
Besides the content filters mentioned in my first post, we have 3 message filters.
Two are quite simple X-header adding filters (to indicate a message is actually received from the internet and an other to give insight into the SRB scores), The last one is some more sophisticated, it detects messages that need to be forwarded to our internal policy systems, regardless of the used destination domain.
Steven.

How Many Chase Cards Do You Have?

I'm about to max out the maximum 5% cash back on my Discover card for dinning this quarter and was thinking about going for the Chase Freedom card.. Question is.. How many Chase cards do you have? I have: CSP - 25k CLAmazon Rewards - 7k CLUnited Mileage Explorer - 32,000k CL I'm not sure how they treat partner cards like Amazon and United in relation to determining the total number of cards or overall credit risk you pose. I was thinking maybe I'll apply and then if denied I'll call and see If I can move around some CLs or even close Amazon..

RSCo wrote:
I'm about to max out the maximum 5% cash back on my Discover card for dinning this quarter and was thinking about going for the Chase Freedom card.. Question is.. How many Chase cards do you have? I have: CSP - 25k CLAmazon Rewards - 7k CLUnited Mileage Explorer - 32,000k CL I'm not sure how they treat partner cards like Amazon and United in relation to determining the total number of cards or overall credit risk you pose. I was thinking maybe I'll apply and then if denied I'll call and see If I can move around some CLs or even close Amazon..Just 2. Slate and Amazon. Do you really have a $32 million CL on Explorer?

How many Hard Drives ?

I've been fortunate to receive a PowerMac G4 733mhz (Digital Audio) along with a Sony 20" CRT monitor at no cost and I'm looking to get all the performance that I can out of it.
So far I've maxed out the RAM and added an iogear USB 2.0 card along with a SIIG Utra ATA 133/100 Pro controller card. The Radeon 9800 pro video card is a couple weeks away yet.
I now have a 160gb and a 60gb as master/slave on the main board, and another 160gb on the controller card in which I'm adding another 80gb to tonight.
I am wondering how many hard drives I can add before I have to start worrying about the power supply. Keep in mind that I'm going to be adding the video card in the future.
I also see that SIIG card says OSX 10.1 or later, does this mean that I cannot connect a drive that boots into OS 9 to the card? Or a drive that may have Yellow Dog Linux?
Thanks, I'd appreciate any input about this new project of mine.

Hi-
OK, let's talk power.... This is what we have to work with (may be slightly higher depending on PSU model):
DA 338W PSU
+5V=20A
+3.3V=24A
+28V=4.04A
+12V=8A
-12V=0.25A
Total on combined +3.3V and +5V =126W @32A
Of course, there is a big difference between idle and load power consumption, but I will list maximum power consumption values. Various requirements are:
ATA/100 Hard drive- Read/Write, approx. 12.8W [email protected], [email protected]
Optical Drive- Full Speed (42x) read, approx. 5.6W [email protected], 15.7W [email protected]
Memory (per 512mb DIMM) 1-3W combined 3.3V,+5V,[email protected]
PCI and AGP slots combined max +3.3V, +5V=62W, AGP (only) up to 20W
Firewire Bus 15W+25V
USB Bus 5v@500mA per port
733mhz PPC processor 1.6V 15.6W (Idle) 22.0W (load)
Fans (combined) +12V [email protected]
As for the Radeon 9800 Pro, under full load, the power requirements are:
+5V [email protected]
+12V [email protected]
+3.3V(AGP) [email protected]
+5V (AGP) [email protected]
+12V (AGP) [email protected]
Points to consider (no particular order):
-An ATA hard drive at idle, will still pull 7.2W and at Standby, will pull 1.4W.
-Unless you are running 2 RAID sets, you would rarely, if ever, have 4 drives simultaneously in Read/Write.
-One process that will push a system to the max is disc burning. Consider CPU at load, one, possibly two hard drives at Read/Write load, and the Optical drive at load. (For all who care, this is why we don't multi-task during burning). Without multi-tasking, the graphics power draw is minimal.
-Weak point of early ATX PSU revisions was the 12V rail. The G4 PSU also has a weak +12V rail (only 8A).
(Run a dual internal RAID, and try to burn a disc..... well, you better set the machine up as a headless server.....)
-Total combined +3.3V, +5V wattage and ampherage is sufficient for most fully loaded system and bus combinations.
-The power requirements of the 9800 Pro are all within the maximum limits of the various voltage rails of the OEM PSU.
-A 237W PSU equipped Sawtooth will run without problems with two hard drives (one system, one storage), a 2.0ghz 7447 processor, USB 2.0 PCI, Radeon 9800 Pro and AC VGA fan. Additional hard drive (scratch drive), PCI cards, HDD fans and lighting overload the +12v rail for operation at load with disc burning. (we're talking about real life experience here...)
-Hard drives are heat producers, and an external firewire connected housing can allow for better overall system operation by reducing interior clutter and heat production.
-High interior temperatures reduce the ability of the PSU to cool itself, and thereby reduce it's ability to produce reliable power under load, in the heat.
-Old ATA hard drives are power hogs and hot in comparison to current SATA drives. Switching to two larger SATA drives will reduce load requirements by 3-4W per drive, as well as reduce heat production. Required use off a SATA PCI controller card eliminates the capacity restriction of the native ATA controller. Switching to SATA saves space, power, and cooling needs.
-And, final (random) thought to consider, a dual 500mhz Gigabit Ethernet (same PSU as the DA) will run two ATA drives simultaneously, burn a DVD, with a 9800 Pro installed, without any problems whatsoever. The same machine will run 3D graphics intensive games at enjoyable framerates, without problem. Internet video, on line games, etc., are all enjoyable, with reasonable performance for the given CPU speed. All uses of the machine are without problem, with the added graphics benefit provided by the 9800 Pro (Yep, another real life experience).
Now, you decide....

How many thousands of Apple TV users have to scream their complaints before Apple will respond to the fury over the impossibly slow download speeds of movies bought through iTunes??????

How many thousands of Apple TV users have to scream their complaints before Apple will respond to the fury over the impossibly slow download speeds of movies bought through iTunes?

As jules says, your rate (currently at least) may be slow.
If it used to be good I wonder is your ISP is slowing ('throttling') your speed after you've used so many GB of a quota each day or month - check what they think you should be getting as a download speed.
While Apple's servers do occasionally play up, it's generally the ISP being slow not Apple.
If you're using Google's DNS servers that has caused issues for some.
Recommended speeds for near instant playback:
SD         2.5Mbps
720p      6 Mbps
1080p    8 Mbps
Is your speed test from somewhere like speedtest.net?
It might be helpful to post Mbps to ensure we/you are not confusing speeds by using different units to those measured.
AC

In How Many ways or Techinques used to have relation beween two factables which dont have common dimesions

Hi folks,
In How Many ways or Techinques used to have relation beween two factables which dont have common dimesions
or
how to establish relation beween two factables.
Thanks
Ravindra KAvali

Hi kavali1985,
According to your description, you want to build relationship between two fact tables without common dimension. Right?
In Analysis Services, to build relationship between two fact tables, at least you need to have "common" column in both tables which can link these two tables. If so, we can create a fact dimension based on one fact table, then build the relationship
with the other fact table. Please refer to link below:
Defining a Fact Relationship
Best Regards,
Simon Hou
TechNet Community Support

How many structures can a BEx report have?

Hi All,
How many structures can a BEx report have?
Is there any limit to that.
Thanks

Hi
we can create two structures in the querl level.
we can able to create two structures on rows but on columns it allows only one structure.
key figures can be included in characteristics. characterstics can't be included in the keyfigures.
we can save the structure as global and locally.
from query performance point of view its not recomemnded to create the structure.
it decreasse the query performance.
it may help you.
bye,
kumar.

How many server nodes can you create per instance

Hi,
Very often the bottle neck in a java installation (NW04s) is the heap size. In order to increase the heap you simple create new server nodes.
My question is:
How many server nodes can you create per instance?
Is there an upper limit before you have to create a new dialog instance (with a web dispatcher)?
I can imagine that when you create a new server node you also have to increase the heap and max therad of the dispatcher. Is there any upper limit of the heap size of the dispatcher node ?

Rasmus , I think you laid out a real good scenario for every one to contribute
I may be very late but just updating this forum for benefit of everyone who visits this.
In addition to all the points above one must also consider following things if one decides to add more server nodes to one dispatcher
1.Garbage collection time
2.Dispatcher would keep on sending request to node S2 if it is not completely bad and there by impacting all the servernode so you might end up restartiing the entire cluster.
3,Debugging also becomes diffculy as you are not sure on which server node you are within the cluster.
4.If you have something like F5 which does hear beat monitoring even one server node goes bad F5 will not report anything.
So in my view one server node per dispatcher is an ideal configuration.
Over All Dispatcher does not consume more resouces (Disk Space + CPU + memory ) at the same time it will give you maintenance flexibility.
Nothing is right or wrong ,all these things are based on how your infrastructure set up is.
Cheers !!
Manish Jain

How many Airport Expresses can you link and still work properly

How many Airiport Expresses can you link and still work properly.

It would depend on whether all of these base stations will be interconnected by Ethernet or by wireless and what your goal is with them.
In a roaming network, where all base stations would be connected by Ethernet, you could have 10+ base stations. Apple has never (at least to me) any limits on the number of base stations that can be used in this type of network.
In an extended network, where all of the base stations use wireless connections, the practical limit would be 4 or 5 base stations.

How Many Hard Inquiries do you guys have?

Similar Messages

Maybe you are looking for