How many LAG ports on the Dell PowerConnect 8024F?
My new deployment
1 x Equallogic PS4110XV with 2 controllers / 4 network ports
3 x ESXi 5 Hosts
2 x Dell PowerConnect 8024F 10 Gbps switch
2 x network ports from the Equallogic PS 4110XV will be connected to each of the PowerConnect 8024F switches
So how many LAG ports do I need to created on each of the PowerConnect 8024F switches?
Some says 4 and some says 2?
Or will it be better if I were to do stacking? I think the 8024F is capable of doing stacking..
I've attached a diagram of the setup. Thanks.
leschua75 wrote:
So how many LAG ports do I need to created on each of the PowerConnect 8024F switches?
Is your question on how to set up link aggregation for the connections to the ESXi hosts or to the SAN?
Similar Messages
-
How many usb ports (if any) does the 30 inch display have?
I am getting the new mac pro I know apple is going to kill the 30 inch display but as they have not done so yet I was wandering how many usb ports does it have?
Hi macnewcomer22,
Instead of buying the Apple 30" Cinema Display, for not much more you could buy the NEC Multisync 3090WQXi, which incorporates later technology and was awarded Best in Show at MacWorld.
The Apple 30" is a good display, but the technology is about 5 years old, and later models from other manufacturers, noticeably NEC, have surpassed it:
http://macperformanceguide.com/RecommendedDisplays.html
http://www.pcpro.co.uk/reviews/monitors/242010/nec-multisync-lcd3090wqxi
I purchased the standard Multisync version, without the Spectraview II software, in July 2009, and I have found it to be excellent in all respects:
http://www.nec-display-solutions.co.uk/p/uk/en/products/details/dp/Products/LCD/ Current/LCD-3090WQXi/LCD-3090WQXi.xhtml?e=e1s1
Although most resellers only stock the 3090WQXi in black, it is also available in a silver finish, which looks great alongside a Mac Pro.
Regards,
Bill -
How many span ports are supported on Sup2T and Catalyst 6880?
Hi,
I did not find any information concerning this.
Would be great if anybody could send me a link to the information how many span ports are supported on the new Cat68 series.
Regards
Thorsten SteffenFor sup2t
========
Local SPAN, RSPAN, and ERSPAN Session Limits
Total Sessions
Local and Source Sessions
Destination Sessions
Local SPAN,
RSPAN Source,
ERSPAN Source
Ingress or Egress or Both
Local SPAN Egress-Only
RSPAN
ERSPAN
80
2
14
64
23
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/15-1SY/config_guide/sup2T/15_1_sy_swcg_2T/span_rspan_erspan.html
Regards,
Naveen
****Rate if it is helpful**** -
For some reason, I cannot change my desktop background no matter how many times I delete the "active" folder. It's as if it's locked. Any ideas how I can fix it?
Yes it sounds like you have a corrupted preference file.
The setting you make in individual programs get saved to a Preference file in your Users/Library/Preferences folder.
All you have to do is drag out the old file to the desktop, reboot and load the program and the preference file gets rebuilt without your preferences which you reset.
For your case I beleive the preference file is
com.apple.desktop.plist -
I'm a school tech coordinator. I have many computers and many iPads. I apologize if there is a some place that has all the rules governing the use of Apple IDs. I looked, and I even tried to get the answers from multiple Apple rep's. I couldn't find the answers.
How many Apple IDs can I have per device?
I want to use the same computer to sync and backup many iOS devices. The iOS devices would be associated with different Apple IDs.
I may load apps under a school Apple ID and have users load their own apps under thier own ID.
How many devices can have the same Apple ID?
Can I use the same Apple ID on all the computers in a lab?
Can I use the same Apple ID on all iPads for a particular grade level?
Are the rules different for iOS devices and computers?
I know that there are limits on "authorize" and "de-authorize" and how frequently those things can be done.
Recently I heard that for the life of an iOS device, it can only be associated with five Apple IDs. That is not good for a school giving iPads to students in a 1:1
To make my life easier, I'd like 200 devices to all use the same Apple ID.iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html
It would be best to address your questions there, especially since this is a public forum, and over there you could post more private issues with this set-up. Not to mention, getting more official answers. -
How many computers can share the same iTunes account?
How many computers can share the same iTunes account?
Hello cincip,
Thanks for the question, and welcome to Apple Support Communities. The following article provides more information on associating multiple computers with your Apple ID:
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/HT4627
Your Apple ID can have up to 10 devices and computers (combined) associated with it. Each computer must also be authorized using the same Apple ID. Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days. You can view which devices or computers are currently associated, remove unused devices or computers, and see how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer.
Thanks,
Matt M. -
My playlists show how many titles are in the playlist but does not show the list of titles
my playlists show how many titles are in the playlist but does not show the list of titles. Is there a setting that I hit by mistake to hide the content?
Perhaps you have made one column extra wide and the window isn't currently showing the Name column. Try resizing columns, turning off those that you don't need, or scrolling sideways.
tt2 -
Opening files doesn't work no matter how many times I press the button.
Application Basics
Name: Firefox
Version: 31.0
User Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:31.0) Gecko/20100101 Firefox/31.0
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: Adblock Plus
Version: 2.6.4
Enabled: true
ID: {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Name: Battlefield Play4Free
Version: 1.0.96.0
Enabled: true
ID: [email protected]
Name: Bitdefender Wallet
Version: 2.0
Enabled: true
ID: [email protected]
Name: Copy As Plain Text
Version: 1.0.9
Enabled: true
ID: {1a5dabbd-0e74-41da-b532-a364bb552cab}
Name: DownThemAll!
Version: 2.0.17
Enabled: true
ID: {DDC359D1-844A-42a7-9AA1-88A850A938A8}
Name: Extended Statusbar
Version: 1.5.10
Enabled: true
ID: {daf44bf7-a45e-4450-979c-91cf07434c3d}
Name: FastestFox
Version: 5.2.1
Enabled: true
ID: [email protected]
Name: Freemake Video Downloader Plugin
Version: 1.0.0
Enabled: true
ID: [email protected]
Name: Freemake Youtube Download Button
Version: 1.0.0
Enabled: true
ID: [email protected]
Name: Greasemonkey
Version: 2.1
Enabled: true
ID: {e4a8a97b-f2ed-450b-b12d-ee082ba24781}
Name: InstantFox
Version: 2.8.9
Enabled: true
ID: searchy@searchy
Name: Multifox
Version: 2.2.0
Enabled: true
ID: multifox@hultmann
Name: Online Convert
Version: 1.4
Enabled: true
ID: [email protected]
Name: ProxMate - Proxy on steroids!
Version: 2.3.3
Enabled: true
ID: jid1-QpHD8URtZWJC2A@jetpack
Name: Show my Password
Version: 2.0
Enabled: true
ID: {cd617372-6743-4ee4-bac4-fbf60f35719e}
Name: Skype Click to Call
Version: 7.3.16540.9015
Enabled: true
ID: {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
Name: Strict Pop-up Blocker
Version: 0.2
Enabled: true
ID: jid1-P34HaABBBpOerQ@jetpack
Name: Tab Badge
Version: 1.15
Enabled: true
ID: [email protected]
Name: Text to Voice
Version: 1.10
Enabled: true
ID: [email protected]
Name: Tile Tabs
Version: 11.9
Enabled: true
ID: tiletabs@DW-dev
Name: URL Fixer
Version: 4.1
Enabled: true
ID: {0fa2149e-bb2c-4ac2-a8d3-479599819475}
Name: Video Resumer
Version: 1.1.3
Enabled: true
ID: videoresumer@jetpack
Name: Yamli for Firefox
Version: 1.1.0
Enabled: true
ID: [email protected]
Name: Webexp Enhanced
Version: 1.1
Enabled: false
ID: [email protected]
Graphics
Adapter Description: Intel(R) HD Graphics 4600
Adapter Description (GPU #2): NVIDIA GeForce GTX 760M
Adapter Drivers: igdumdim64 igd10iumd64 igd10iumd64 igdumdim32 igd10iumd32 igd10iumd32
Adapter Drivers (GPU #2): nvd3dumx,nvwgf2umx,nvwgf2umx nvd3dum,nvwgf2um,nvwgf2um
Adapter RAM: Unknown
Adapter RAM (GPU #2): 2048
Device ID: 0x0416
Device ID (GPU #2): 0x11e3
Direct2D Enabled: true
DirectWrite Enabled: true (6.3.9600.17111)
Driver Date: 1-22-2014
Driver Date (GPU #2): 9-1-2013
Driver Version: 10.18.10.3412
Driver Version (GPU #2): 9.18.13.2702
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 10
Vendor ID: 0x8086
Vendor ID (GPU #2): 0x10de
WebGL Renderer: Google Inc. -- ANGLE (Intel(R) HD Graphics 4600 Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: false
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
Important Modified Preferences
accessibility.newtabplus.homepage: chrome://branding/locale/browserconfig.properties
accessibility.newtabplus.page: 1
accessibility.newtabplus.ver: 4.5.2
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 1
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20140716183446
browser.startup.homepage_override.buildID: 20140716183446
browser.startup.homepage_override.mstone: 31.0
browser.tabs.warnOnClose: false
dom.mozApps.used: true
dom.popup_allowed_events:
extensions.lastAppVersion: 31.0
font.internaluseonly.changed: true
gfx.direct3d.last_used_feature_level_idx: 0
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1406922206
places.history.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
plugin.state.npuplaypc: 0
print.printer_Microsoft_XPS_Document_Writer.print_bgcolor: false
print.printer_Microsoft_XPS_Document_Writer.print_bgimages: false
print.printer_Microsoft_XPS_Document_Writer.print_colorspace:
print.printer_Microsoft_XPS_Document_Writer.print_command:
print.printer_Microsoft_XPS_Document_Writer.print_downloadfonts: false
print.printer_Microsoft_XPS_Document_Writer.print_duplex: -854238192
print.printer_Microsoft_XPS_Document_Writer.print_edge_bottom: 0
print.printer_Microsoft_XPS_Document_Writer.print_edge_left: 0
print.printer_Microsoft_XPS_Document_Writer.print_edge_right: 0
print.printer_Microsoft_XPS_Document_Writer.print_edge_top: 0
print.printer_Microsoft_XPS_Document_Writer.print_evenpages: true
print.printer_Microsoft_XPS_Document_Writer.print_footercenter:
print.printer_Microsoft_XPS_Document_Writer.print_footerleft: &PT
print.printer_Microsoft_XPS_Document_Writer.print_footerright: &D
print.printer_Microsoft_XPS_Document_Writer.print_headercenter:
print.printer_Microsoft_XPS_Document_Writer.print_headerleft: &T
print.printer_Microsoft_XPS_Document_Writer.print_headerright: &U
print.printer_Microsoft_XPS_Document_Writer.print_in_color: true
print.printer_Microsoft_XPS_Document_Writer.print_margin_bottom: 0.5
print.printer_Microsoft_XPS_Document_Writer.print_margin_left: 0.5
print.printer_Microsoft_XPS_Document_Writer.print_margin_right: 0.5
print.printer_Microsoft_XPS_Document_Writer.print_margin_top: 0.5
print.printer_Microsoft_XPS_Document_Writer.print_oddpages: true
print.printer_Microsoft_XPS_Document_Writer.print_orientation: 0
print.printer_Microsoft_XPS_Document_Writer.print_page_delay: 50
print.printer_Microsoft_XPS_Document_Writer.print_paper_data: 1
print.printer_Microsoft_XPS_Document_Writer.print_paper_height: 11.00
print.printer_Microsoft_XPS_Document_Writer.print_paper_name:
print.printer_Microsoft_XPS_Document_Writer.print_paper_size_type: 0
print.printer_Microsoft_XPS_Document_Writer.print_paper_size_unit: 0
print.printer_Microsoft_XPS_Document_Writer.print_paper_width: 8.50
print.printer_Microsoft_XPS_Document_Writer.print_plex_name:
print.printer_Microsoft_XPS_Document_Writer.print_resolution: 0
print.printer_Microsoft_XPS_Document_Writer.print_resolution_name:
print.printer_Microsoft_XPS_Document_Writer.print_reversed: false
print.printer_Microsoft_XPS_Document_Writer.print_scaling: 1.00
print.printer_Microsoft_XPS_Document_Writer.print_shrink_to_fit: true
print.printer_Microsoft_XPS_Document_Writer.print_to_file: false
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_bottom: 0
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_left: 0
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_right: 0
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_top: 0
privacy.sanitize.migrateFx3Prefs: true
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1406135669
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.6
Version in use: 4.10.6
NSS
Expected minimum version: 3.16.2 Basic ECC
Version in use: 3.16.2 Basic ECC
NSSSMIME
Expected minimum version: 3.16.2 Basic ECC
Version in use: 3.16.2 Basic ECC
NSSSSL
Expected minimum version: 3.16.2 Basic ECC
Version in use: 3.16.2 Basic ECC
NSSUTIL
Expected minimum version: 3.16.2
Version in use: 3.16.2
Experimental Features
Hi. Whenever I want to upload a picture or a file, no matter how many times I press the "Upload" or "Browse" button, nothing happens. I can keep spam clicking on it and it wouldn't do anything. This is not specific to a site, but happens everywhere. Dragging and dropping files works on Facebook and Imgur, but not all websites support this. I'm using Firefox 31.0 on Windows 8.1. Yes, I have tried restarting Firefox and computer, this has been happening for a while now. Thanks.Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
This probably still applies to Windows 8:
Try to delete the MRU (Most Recently Used) ComDlg32 registry keys with the registry editor (regedit.exe).
Navigate to: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\ComDlg32
Delete the subkeys (LastVisitedPidlMRU and OpenSavePidlMRU)
Be cautious with editing the registry as there is no Undo possible: all changes are applied immediately.
You can export registry keys before making changes.
* http://www.winhelponline.com/articles/195/1/How-to-clear-the-file-names-MRU-in-Common-Dialog-boxes-in-Windows-Vista.html -
How many external displays dose the Retina MBP suport?
How many external displays dose the Retina MBP support? I have herd conflicting information about this, an apple store employee told me that it could support 2 thunderbolt displays while simultaneously running a HDMI connected display (witch would be awesome if true) but I am extremely skeptical, that seems like to much for one GPU.
Graphics and Video support:
Intel HD Graphics 4000
NVIDIA GeForce GT 650M with 1GB of GDDR5 memory and automatic graphics switching
Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, at millions of colors
Thunderbolt digital video output
Native Mini DisplayPort output
DVI output using Mini DisplayPort to DVI Adapter (sold separately)
VGA output using Mini DisplayPort to VGA Adapter (sold separately)
Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately) -
How we Can find out How many Users Logon into the Portal those users Names.
Hi Friends
I have one doubt in Portal,
How we can find how many Users Logon into the Portal and how we can find that users Names in Portal.
Regards
Vijay KalluriHello Vijay,
If you are at all interested in a 3rd party application to make your life a bit easier getting stats on your users, you could check out Click Stream by Sweetlets.
Click Stream uses the Usermanagement (UME) API to get more information about the user, groups, roles, LDAP attributes etc. and offers you the ability to filter this information in nearly any report at the click of a button.
Click Stream also uses the PCD API to get information about the pages your users are visiting too.
In the very near future Click Stream will also have iView recording to monitor iViews, telling which iViews have been clicked, etc.
Here are some reviews on the SAP EcoHub from people who have used it: http://ecohub.sdn.sap.com/irj/ecohub/solutions/clickstream
Please just let me know if you have any question or if you are open to test drive Click Stream. We will certainly help as best as we can.
Good luck. -
Using powershell to find out how many people are using the on-prem SkyDrive
Hi
Is there a way of using powershell to find out how many people are using the on-prem SkyDrive?
Thank you.Hi,
According to your post, my understanding is that you wanted to use PowerShell to find out the users who use the on premise SkyDrive.
As this is the forum for SharePoint Server, I recommend you post your question to the forum for PowerShell or SkyDrive.
Windows PowerShell forum:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverpowershell
SkyDrive forum:
http://answers.microsoft.com/en-us/onedrive/forum/sdsignin?tab=Threads
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
How many optional allowed in the query?
Hi,
Data base is getting disconnected while running the below sparql query (Query with 9 optional conditions).
I tested the query with 5 optional its working fine but, its not working for more than 5 optional.
How many optional allowed in the query?
Please advice me to solve this problem.
Error Detail: ORA-03113: end-of-file on communication channel
SELECT bi, OWNER,name,usage,notes,icto,app,ssd,ssdname,ssdid,sdname,sdarchitect,schedule
FROM TABLE (sem_match('{
?bi rdf:type di:Bulk_Interface .
?bi di:hasBulkInterfaceItOwner ?OWNER .
?bi di:hasBulkInterfaceName ?name .
?bi di:hasBulkInterfaceRecipientApplicationArea ?usage .
?bi di:hasBulkInterfaceRecipientFeederType ?notes .
?bi di:hasBulkInterfaceSupplierApplicationId ?icto .
?app ds:hasConceptualSourceApplicationIctoId ?icto .
?ssd ds:hasConceptualSourceApplication ?app .
?ssd ds:hasConceptualSourceSubdomainName ?ssdname .
?ssd ds:hasConceptualSourceSubdomainIctoId ?ssdid .
?sd ds:hasConceptualSourceSubdomain ?ssd .
?sd ds:hasConceptualSourceDomainName ?sdname .
?sd ds:hasConceptualSourceDomainArchitect ?sdarchitect .
?bi di:hasBulkInterfaceDeliverySchedule ?schedule
optional {?bi di:hasBulkInterfaceRecSet1AverageStorageRequirements ?avgsize}
optional {?bi di:hasBulkInterfaceWorstStorageRequirements ?maxsize}
optional {?bi di:hasBulkInterfaceRecSet1AverageNumberOfRecords ?avgrec}
optional {?bi di:hasBulkInterfaceAverageNumberOfRecords ?avgrec}
optional {?bi di:hasBulkInterfaceRecSet1WorstNumberOfRecords ?maxrec}
optional {?bi di:hasBulkInterfaceWorstNumberOfRecords ?maxrec}
optional {?bi di:hasBulkInterfaceTransferMethodJob ?job}
optional {?bi di:hasBulkInterfaceDataFileAvailability ?post}
optional {?bi di:hasBulkInterfaceBusinessDescription ?descr}
sem_models ('IFM_CURR', 'SRC_CURR'),
SEM_Rulebases('OWLPRIME'),
sem_aliases(SEM_ALIAS('di','http://www.cse.com/sbip/dwh/mdm/data_interface#'),
SEM_ALIAS('ds','http://www.cse.com/sbip/dwh/mdm/data_sources#'))
, NULL));
Let me know if you need any other details.
Regards,
Kavitha.
Edited by: 789259 on Aug 3, 2011 2:01 AMIf possible, I would suggest that you upgrade to the latest release: 11.2.0.2.0. It has many bugfixes and enhancements.
There is no limit on the number of optionals per query. I suspect that the use of the same new variables (?avgrec and ?maxrec) in the parallel optional clauses is the reason you are seeing the error in this particular case. If you use different variable names does the error go away? If needed, you can use a coalesce in the outer SQL SELECT to get the same behavior as before (e.g. COALESCE(avgrec1, avgrec2) as avgrec).
Thanks,
Matt -
When I am logged into iTunes and try to purchase something the window requesting I sign in to iTunes store keeps an appearing no matter how many times I enter the password (even though I'm already signed in!). Any suggestions greatly appreciated. Thanks.
This may help.
Fix for “No Content” on iPhone & iPod after iOS 4.2.1 update
The try the standar fixes:
- Reset. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTues
- Restore the iPod factoery defaults/new iPod. -
Determin how many user log on the site using JSP/Servlet?
Hi all,
Is there a way to determine how many user log on the site using JSP/Sevlet? I'm running Apache 2.x & Tomcat 4.x
I'm trying to get a list of user currently log in the site.
Please help!
Thanks,
-JN-You could use the HttpSessionBindingListener interface. Every time a user logs into the session put a user object into the session. The user object will implement the HttpSessionBindingListener interface. When the user object is added to a sessiion it recieves an event and it increments a counter. When the session times out or you invalidate the session because the user has logged out the user object will recieve an event and it can then decrement the counter.
This will at least tell how many active user sessions there are. -
How many ways to edit the data in PSA?
HI
How many ways to edit the data in PSA? Can we edit both transaction, master data also?Hi.......
Yes yo can edit data in PSA for both Master data and transaction data.......the only diffrence is that in transaction data you have to delete the request from the target before editing......and in master data no need to delete any request....directly edit the PSA........
To edit PSA......the most easiest method has alsredy mentioned ............
But suppose you don't have authorization to edit the data in PSA but still you want to edit then you can follow the process mentioned below..........
You can call up the function module RSAR_ODS_API_GET with the list of request IDs given by the function module RSSM_API_REQUEST_GET. The function module RSAR_ODS_API_GET no longer recognizes InfoSources on the interface, rather it recognizes the request IDs instead. With the parameter I_T_SELECTIONS, you can restrict reading data records in the PSA table with reference to the fields of the transfer structure. In your program, the selections are filled and transferred to the parameter I_T_SELECTIONS.
The import parameter causes the function module to output the data records in the parameter E_T_DATA. Data output is unstructured, since the function module RSAR_ODS_API_GET works generically, and therefore does not recognize the specific structure of the PSA. You can find information on the field in the PSA table using the parameter E_T_RSFIELDTXT.
RSAR_ODS_API_PUT
After merging or checking and subsequently changing the data, you can write the altered data records into the PSA table with the function module RSAR_ODS_API_PUT. To be able to write request data into the table with the help of this function module, you have to enter the corresponding request ID. The parameter E_T_DATA contains the changed data records.
check these links:
http://help.sap.com/saphelp_nw04/helpdata/en/4f/8d4b38187a8442e10000009b38f8cf/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/67efb9bb-0601-0010-f7a2-b582e94bcf8a
Hope this helps.......
Regards,
Debjani......
Maybe you are looking for
-
No Apple Remote or Apple Mini-DVI to VGA Adaptor included with new MacBooks
Hi! I just picked up a new (black) MacBook yesterday from the Apple Retail Store in Meadowhall (Sheffield). I was quite surprised to open the box and find that the Apple Remote and Mini-DVI to VGA adaptor cable are now optional items and no longer in
-
Go URL no longer works when placed as 'Treat as Text' column property
Hi all - I have a question on syntax for using a Go URL as part of the 'Treat as Text' Data Format property for a column... In a pivot I had a column (employee name) that had in the formula a Go URL that passed parameters to another report. The drill
-
Passing a variable to set a movieclip location
In frame 1 of the the movie I have defined the following: var cl_y=502.0; Elsewhere, I am running the following script: -- seaty is the original position of the movie clip as defined in frame 1 var seaty = this+"_y"; -- resets the position of the mov
-
How do I sync iTunes on our home computer to my laptop?
I have a Windows 7 laptop and just installed iTunes to it today. Our home computer uses the iCloud and I've set up my laptop to use it too. Is there anyway to get the music from the home computer to my laptop's iTunes? Thank you!
-
Could not create an new account for use
Last night I logged in with my AppleID to make a post. As it was the first time, I had to create an account/profile in order to do so. But that was not possible using 10.6.6 and the latest Safafi. What happened was this : Name: AppleID: Log out of th