How many master data tables

Hi Friends,
                       When you activate master data in all kind of perspectives, then how tables we can get and what are those with naming conventions, i was told by somebody that we get 12 tables, is it right?
Regards,
Balaji K. Reddy

Hi Balaji,
It depends upon the settings you make when you create your info-object. If you check all the options then these tables would be created:
1. SID table - /BI0/SXXXX
2. View of master data table - /BI0/MXXX
3. Master data table (time-independent) - /BI0/PXXXX
4. SID table attributes - /BI0/XXXXXX
5. Text table - /BI0/TXXXX
6. Master data table (time-dependent) - /BI0/QXXXX
7. SID table attributes - /BI0/YXXXXX (time dependent attr)
8. Hierarchy table (of a characteristic) - BI0/HXXXX
9.  SID table for hierarchies - BI0/KXXXX
10. SID Structure of the hierarchy - BI0/IXXXX
11. Hierarchy interval table (of a characteristic) - /BIC/JXXXX
where "XXXX" is a standard SAP info-object.
All these tables are generated by ths system and the data from these tables would be fetched depending upon the action executed in the query. In short, we need not bother about these tables and the system takes care of it.
Bye
Dinesh

Similar Messages

  • How to find the number of entries in a master data table

    Hi Experts,
    I am trying to find the entries in 0CUSTOMER master data.
    BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
    I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

    Hi Dev,
    Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
    Hope this helps.
    Thanks and Regards
    Subray Hegde

  • How many types of tables exists and what are they in data dictionary?

    hi,
    How many types of tables exists and what are they in data dictionary?
    regards.

    Hello Liu,
    Please search in forum before posting any question .
    anyhow check the below link :
    http://web.mit.edu/sapr3/dev/sap_table_types.htm
    Thanks
    Seshu

  • How are attribute and text master data tables linked in SAP R/3?

    Hello,
    how are attribute and text master data tables linked in SAP R/3?
    Most tables with attribute master data like T001 for company codes,
    have a text master data table T001T (add "T" to table name).
    When looking at the content of table T001 via transaction se11,
    the text are automatically joined.
    But for some tables there is no "T"-table (e.g. table TVBUR for sales offices
    has no text table TVBURT), but in se11 you get texts. There is an address
    link in TVBUR, but the Name1, etc. are empty.
    a) Where are the text stored?
    b) How does the system know of the link?
    Hope someone can help!
    Best regards
    Thomas

    Hi Thomas
    The master and text table are not linked by name, of course, if you see the text table, it has the same key fields of master table, only it has the field key spras and the field for description.
    The link beetween the tables is done by foreign key: if you check the text table TVKBT u need to see how the foreign key for field VKBUR is done:
    -> Foreing key with table TVBUR
    -> Foreing key field type -> KEY FIELD FOR A TEXT TABLE
    ->Cardinality-> 1-:CN
    It's very important the attribute sets for Foreing key field type, if it's KEY FIELD FOR A TEXT TABLE, it'll mean the table is a text table: i.e. that mean the master table is a check table for the text table, where the foreign key type is for text table.
    U can find out the text table of master table by SE11: GoTo->Text Table
    U can fined some information in table DD08L.
    Max

  • How to create time dependant master data table in R/3?

    Hi gurus,
             I am new to BW.I try to execute the 'Time dependant Attribute' into BW.in my scenario my source system must give me the data like "salesrep ID,Manager ID,Date to,Date from,Sales region". I like to know how to define this master data in SAP R/3(Source system)?. Give me the steps to create master data table in R/3.
    Manager may change periodically.even i need to maintain all the changes in R/3.
    Thanks & Regards,
    Bharath

    built-in type method means.,
    there is no need to create data element and domain objects seperately for each and every field of the table which ever you are creating, system will implicitly fix the size based on the data type you selected....

  • How to check the records in Master Data Table?

    Hi,
       I am trying to load the Master Data Table using the Flat File.Now how to check the records in Master Data Table?
    I done the following way:
    Info Provider->Info Object->Right Click->Display Data or Maintain Master Data
    But it's not showing the records.It's asking like CID from......To......
                                                                        CID(SID)from.............To.......
                                                                         here CID means customer id(characteristic).
    and showing some settings.
    Please guide me.
    Thanks & Regards

    Hi Sri,
    Go to T- code RSD1 and type your info object name and open the P- table in the infoobject then select execute symbol to see the updated  data in to master data info object.
    regards
    sap

  • How can i make indexes on the Master data table

    Hi Gurus,
    I got a query, in this one i have an Infoobject with many values, like to say invoice number, and i filter and need a lot of Nav Attr of this IO, for this reason the query performance its really bad but i dont know what to do, some friend advice me this : So I would suggest some indexes on the Master data table of your IO for the navigationnal attributer you want to use.
    what else can you tell me? if i put this IO in Line item dimension? , or just with flag high cardinality ? help guys.....

    Hi Jorge.....
    Look.........Line item dimension and High Cardinality r related to each other..............Characteristic which has High Cardinality..we will use it as Line item dimension..........But........A dimension marked as a line item cannot subsequently include additional characteristics.......... This is only possible with normal dimensions...........If u r very sure.............then u can go for Line item dimension............no issues........
    U can also try to Create index..............
    Check this...........
    Re: Indexes on Master Data tables
    Regards,
    Debjani..........

  • Incident management and Critical Master data table change management.

    Dears,
    I need to configure Incident management and Critical Master data table change management on our solman 7.0 server.
    I want to know how many days should be required for this activity and please share documents.
    Shivam

    Hi,
    I faced a similar situation,
    I tried all the possible ways like activating InfoObject manually, Through an activation program of aggregates,
    Also ran RSRV check which was showing no negative results.
    I raised an OSS note for the same but after that when SAP returned back the process chian ran again as it is a daily load which activated the record in 'M'.
    I ask you to wait till the next process chian run, and try all possible ways to activate.
    If it is not corrected then raise an oss to SAP.
    Thanks & Regards,
    Vishnu

  • Copying Master Data Tables

    Hi
    Currently we have 0COSTELMT which is compunded to 0C0_AREA.
    Now I have to create ZCOSTELMT which is not compunded to 0CO_AREA.
    Also I have to create a new Cost Element Master table which is a copy of the existing Master table, except that Controlling Area is not included.  Duplicates in the source (two or more rows, from different Controlling Area, having the same Cost Element id) should result in one record.  The Cost Accounting cubes will then drop the existing Cost Element Master and include instead this new Master.  Any hierarchies built on Cost Element must also be attached to this new Cost Element Master.
    How do I create new master data tables which are a copy of old ones with some changes.
    Also how do I attach the hierarchies.

    How do I delete this attachment of datasources to 0COSTELMNT.
    Do I need to create new infopackages using the same datasources or should I create all three datasources too from scratch.
    I dont want 0CO_AREA in the new master data.
    Voodi,
    Can you elaborate " transformations between original DS and new IO"
    Thanks

  • Customer master data table KNVV is missing

    Hi All
    I a trying to cancel the billing document using transaction VF11. System shows error as " customer XYZ customer master data table KNVV is missing"
    Please advice how to proceed?
    Thanks and regards
    satyaprasad

    Hi,
    Goto the T.Code "Se11/SE16".
    Enter the table name as "VBRK".
    Enter your invoice number.Execute.
    Check the value of "VKORG(Sales Organisation)","VTWEG(Distribution Channel)" and "SPART(Division)".
    Or you check the same in "VF03" screen also.
    Make a copy of the above three fields.
    Goto the T.Code "Se11/SE16".
    Enter the table name as "KNVV".Enter your customer number in "KUNNR" and the values of "Sales organisation,Distribution channel and division" into their respective fields.Execute.
    Check if there are any entries.The result should be no entries so that only you will receive this error message.
    If you created the customer with out sales area,while creating the order only it will give you an error message as "No customer master record exists for sold-to party XXXXXXX
    Message no. VP199".
    As the partners are defined in sales area data only.
    Regards,
    Krishna.

  • Mismatch between Master data table /BIC/P and SID table /BIC/S

    Hello All,
    in our master data table we have logsys in key
    after a system copy we had a problem with logsys name, when we have copied our bw prod system in test system we find prod logsys like value, the BDLS doesn't change all values for all structures and some master data table still have prod logsys instead of test logsys but some records have test logsys values
    for example:
    our production logsys is: BIP300 and our test logsys is BIT300
    in our master data test table we find had some records logsys value like BIP300 and others with BIT300
    all our ODS and CUBE have the right logsys value in test "BIT300"
    we have developed an ABAP report to execute on selected tables to change logsys from BIP300 to BIT300
    we execute the report on only P master data table like /BIC/PZCOOR and it's work fine and has changed all the records values
    from BIP300 to BIT300 and this program has eliminated all duplicate records
    the problem is when on our master data try to view data we find that bw return data from SID table /BIC/SZCOOR
    in fact if we go to control data on /BIC/SZCOOR table we find that there still are records with logsys BIP300 and BIT300
    and the same if we execute our query on ZCOOR we have values with BIP300 and BIT300
    how should we fix this problem?
    if we execute our ABAP report on /BIC/SZCOOR to change logsysname we can fix that or we could have problem?
    please can give me some useful help
    thanks a lot
    Bilal

    Hi ,
    Follow the sequence of deletion .
    1.Delete data from cube YMM_*
    2.Delete data from 0pur_c*
    3.Delete data from 0material .
    4.Delete data from info_rec .
    Best option would be do selective deletion for these four materials and run a repair request then after to update into data target.
    Hope that helps.
    Regards
    Mr Kapadia

  • Master data table error in PC

    Hi Gurus
    i am trying to run a data transfer process for BPARTNER but when i do it it gives me an error...that master data table is already locked..how to go about resolving it..points not an issue

    Hi,
    Goto tcode SM12, give the user as * and then execute it & in the next screen search BPARTNER
    there it will show you the entries for locks on this infoobject if any....
    It will show you the user who locked, the process (Eg: Change Run or some other data load) which locked & so on....
    & then if needed delete locks....
    And then try starting your load...
    Rgrds,
    Habeeb

  • Combination exists in Master Data Table, but error occurs in layout

    Hi,
    We are getting an error in planning layouts that state that a combination of Cost Center and Profit Center is not included in master data table for characteristic. I looked at note 1222910 that apparently fixes this issue, but we are on SP21 and the note was included in SP19.
    Any suggestions?
    Br,
    Sonni

    Hi there,
    That seems an issue throwed by the characteristic relationships.
    Are you sure the profit center/cost center issued in the message exist in the master data?
    It seems some how you're getting that combination of that profit center/cost center in the planning layout and the charateristic relationship is validating that.
    See if you query has the valid combinations for the profit centers/cost centers in the filter and/or variables.
    Diogo.

  • Join Master Data table with fact table

    Hello gurus.
    I have a requirement on a characteristic. I have to obtain the description of those values that are not filled with data in the cube, the example looks like this:
    Data in the cube:
    Characteristic 1 |  charactersitic 2 |  value
    AU                           HPDV              200
    TB                           OPPG              500
    TC                           HPDV              900
    TR                           OPMR             400
                                   HPDV              300
                                   OPMR             200
                                   OPPG             100
    Master Data Table:
                                Description
    HPDV    AU       Auditoria  
    OPPG    TB       Servicios Logisticos
    HPDV     TC       Occidente
    OPMR    TR       Oriente
    HPDV     AI        Punta Norte
    OPGS    CV       Escandón
    HPDV    QR       Barquisimeto
    HPDV    MM      Valencia
    HPDV    DT        Barcelona
    I need to display in the query only the description of the characterstic whose data is not in the cube, according to the example the values that are missing in the cube are:
    HPDV     AI        Punta Norte
    OPGS    CV       Escandón
    HPDV    QR       Barquisimeto
    HPDV    MM      Valencia
    HPDV    DT        Barcelona
    How can i achive this ?? 
    Thank you in advance.

    Hi Guillermo,
    I think you are trying to achieve this: To display characteristic values for which no transaction data or only low values exist for the selected period.
    See here for the solution details:
    http://help.sap.com/saphelp_nw04/helpdata/en/3a/d1603d13b5c72ee10000000a114084/content.htm
    Hope this helps...

  • I have a key figure in my master data table i want to display the key figur

    Hi All,
    I have a key figure in my master data table i want to display the keyfigure in my report how can i display it can somebody help me in this scenario 
    Regards
    Kiran Kumar

    Hi Kiran,
    Assume that Material master data table material has price as an attribute. To get this price as key fig in query, get material number in rows and in columns create new formula with replacement path to get material price as key figure.
    Note: Without taking material number into rows, we can't get the price into columns.
    Hope this helps u..
    Cheers......
    Sk babu

Maybe you are looking for