How many memory slots on mac mini 2010?

I have a Mac Mini 2.4 (mid-2010) I bought used with 4GB of RAM. The previous owner upgraded from the standard 2GB. I have the chance to get 2X more 2GB cards that are compatible. I am curious if I can do that. Are there 4 memory card slots? Or would I need to buy two 4GB cards? Thanks!

http://support.apple.com/kb/SP585
Regards.

Similar Messages

Problem upgrading memory of a mac mini 2010

I have a Mac mini 2010 with these memories
2 x 1GB PC2-5300 667MHz Ram
http://i.imgur.com/L25KW0q.jpg
I bought a memoir of Ebay and do not work.
Insert 2 modules and makes strange beeps on boot, if I put up does nothing starts without beeping and not send video signal and if I put the form below makes the odd beep.
They are:
RAM-DDR3-Macbook-pro-mid-02.02.2012-GB-4GB-mt8jtf25664hz-1g6m1
It is this: http://imgur.com/DFV7s99
2GB 1RX8 PC3-12800S
http://es.wikipedia.org/wiki/DDR3_SDRAM
Turns out I tried i7 laptop with (DDR3, 10600, 1333-MHz) and worked and this is (12800 DDR3-1600) art of a MacBook Pro 2012 ...and does not work ...
Can anything be done?
Perhaps better than store or sell ...
My laptop has Windows 8Gb and may put them at Mac and these 4Gb the laptop i7, but maybe worse.
Greetings

A mid 2010 Mini needs:
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

How many memory slots on latest iMac?

Thinking of purchasing iMac 27", 3.4; i5. From what I understand, the memory card access point is in the back, therefore easy to upgrade. How many memory card slots are there? Also, it is recommended at 32 max. Has anyone tried to up that to 64, and if so, any issues. I do a lot of photography with Adobe.
Thank you in advance.

1. Four.
2. At this point, treat 32GB as being the limit.
(110484)

How many GHz for a mac mini to act as a media server?

Hi,
We just bought a mac mini with 2.5 GHz to act as our media server. We wanted to be able to stream, which it handles nicely. But now our desktop has fallen to disrepair and I am tempted to take the 2.5 Ghz mac mini as our desktop and buy a cheaper mac mini for our server. Will this work? Thank you. Really appreciate anyone's input.

Are you talking new or used?
Any new ones should work, many old ones also if we're talking Intel Mimis.

How many memory slots do we have for Lenovo G50 Laptop (59-443034)?

There are 2 RAM slot in this laptop model. You can extend RAM upto 16 GB.

Hi karthik1.
Also remember they should be DDR3L that means voltage is 1.35V instead of 1.5V.
Sincerely,
Dominik

Upgrade my mac mini (2010 mid 2.4ghz) memory

hi everyone
i am planning to upgrade my mac mini memory. i have a 2010 mid model mac mini which is support 1066mhz, pc3-8500, ddr3
but i was bought two 2 gb pc3-10666 memory. is that work on my mac?
and what is the different between them?
thanks

No take or send them back, you need PC3-8500.
Computer memory upgrades for Apple Mac mini (Intel Core 2 Duo 2.4GHz) DDR3 - Mid 2010 Desktop/PC from Crucial.com
Apple Mac mini Memory DDR3 / Ram upgrades for 2009 Mac mini & 2010 Mac mini unibody models

Mac Mini 2010 Hardware Test w/ Lion

I have a mac mini 2010 that came with snow leopard installed. I recently upgraded to Lion, however I need to do the Apple hardware test. When I attempt to load the hardware test by holding down the D key when booting the Mac Mini the hardware test fails to load. What do I need to do to load the Hardware test?

How to run hardware diagnostics for an Intel Mac
Boot from your original OS X Installer Disc One that came with your computer. After the chime press and hold down the "D" key until the diagnostic screen appears. Run the extended tests for a minimum of two or three hours. If any error messages appear note them down as you will need to report them to the service tech when you take the computer in for repair.
Some "common" error indicators:
SNS - sensor error
MEM - memory error
HDD - hard disk drive error
MOT - fan error

Can I install more memory on a mac mini

Can I install more memory on a mac mini?

Welcome to Apple Support Communities
Of course. You can upgrade the RAM always that you do not have a Late 2014 Mac mini (I am not sure that you can install more RAM, and if you can, it will void the warranty), and you can purchase more RAM at OWC or Crucial.
See -> Mac mini: How to remove or install memory - Apple Support

Mac mini 2010 very slow after update to Mavericks

My mac mini 2010 (2.4 Ghz, 8GB ram) is running really very slow after updating to Mavericks.
Clearly OneDrive is a pain... but had it running on ML as well, and though it is a memory and CPU hog, it never really slowed down the system.
This is what Etresoft says:
EtreCheck version: 1.9.15 (52)
Report generated 21 Aug 2014 19:39:34 GMT+2
Hardware Information: ?
Mac mini (Mid 2010) (Verified)
Mac mini - model: Macmini4,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information: ?
NVIDIA GeForce 320M - VRAM: 256 MB
32LG3000 1360 x 768 @ 59 Hz
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 1 day 0:0:8
Disk Information: ?
TOSHIBA MK3255GSXF disk0 : (320,07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 319,21 GB (104,99 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ?
Western Digital Ext HDD 1021 1,5 TB
S.M.A.R.T. Status: Verified
BigOne (disk1s1) /Volumes/BigOne: 1,5 TB (16,45 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Logitech USB Receiver
Logitech USB Receiver
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.Cycling74.driver.Soundflower (1.6.2 - SDK 10.6) Support
[not loaded] com.iospirit.driver.RBTSRPlugin (1.18 - SDK 10.6) Support
[loaded] com.iospirit.driver.rbiokithelper (1.18.1 - SDK 10.6) Support
Problem System Launch Daemons: ?
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist
Launch Daemons: ?
[loaded] com.iospirit.candelair.daemon.plist Support
[loaded] com.iospirit.candelair.sync.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[loaded] com.google.keystone.agent.plist Support
[running] com.plexapp.helper.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ?
iTunesHelper
Preview
ElementsAutoAnalyzer
Google Chrome
SEC Helper
Internet Plug-ins: ?
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Candelair Support
Perian Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 199.51 GB
Destinations:
BigOne [Local] (Last used)
Total size: 1 TB
Total number of backups: 84
Oldest backup: 2013-07-17 22:07:43 +0000
Last backup: 2014-08-21 17:31:13 +0000
Size of backup disk: Excellent
Backup size 1 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      78% OneDrive
      3% ScreensharingAgent
      3% WindowServer
      0% Google Chrome
      0% fontd
Top Processes by Memory: ?
1.18 GB OneDrive
90 MB Google Chrome
82 MB Finder
57 MB mds_stores
51 MB Google Chrome Helper
Virtual Memory Information: ?
4.46 GB Free RAM
1.94 GB Active RAM
321 MB Inactive RAM
908 MB Wired RAM
3.02 GB Page-ins
506 MB Page-outs

Chances are you have applications that are out of date and need to be updated. Another possibility is Spotlight is indexing and you to wait until it has finished.

How Many Memory Modules (1 or 2) Come Pre-Installed in HP Envy Touchsmart m7-j120dx?

I know my HP Envy Touchsmart m7-j120dx came preinstalled with 8GB of RAM. I purchased it last year from Best Buy. Haven't taken the back off of the laptop just yet and it's at home while I'm at work, but wanted to see if anyone can verify *how* the standard 8GB of RAM is in there at present? Two 4GB memory modules or a single 8GB memory module?
I'm trying to place an order online this afternoon to upgrade the laptop to 16GB of RAM and I'd like to know if I need to order two 8GB memory modules or just a single 8GB memory module, depending on exactly how many memory modules are in the laptop at present to make the existing 8GB of RAM I'm running.
Thanks if anyone knows the answer to this.

Okay, one more question...
The memory in my laptop came pre-stalled with 8GB of it, with the characteristics of 1600Mhz and DDR3L PC3-12800.
Replacement memory (16GB) recommended by Crucial.com for my system has 1866Mhz instead of 1600Mhz, and is DDR3L PC3-14900.
What was recommended has of course slightly higher specs of the memory than what's currently running in my system for an additional $23 over just replacing the memory with 16GB of RAM having the identical 1600Mhz and DDR3L PC3-12800 specs.
Can my HP Envy TouchSmart m7-j120dx actually do anything as far as increased performance in going with the 1866Mhz and DDR3L PC3-14900 memory or would my laptop continue to "dumb the memory down" to 1600Mhz and DDR3L PC3-12800 specs and not be able to utilize the enhanced specs of 1866Mhz and DDR3L PC3-14900?
Just trying to spend my money wisely. Thanks for any additional clarification.

Mini DisplayPort to DVI-D adapter works with Mac Mini 2010?

Hi,
I would like to connect my Mac Mini (2010 edition) to both my Samsung PX2370 display and my LCD TV. Currently, I only have the Samsung display connected through the included HDMI-to-DVI adapter, but I'd like to use the HDMI output to directly connect my LCD TV, and connect the Samsung display by using a Mini DisplayPort-to-DVI adapter, like the one that is for sale at the Apple Online Store. Such adapter should work without trouble with any MAc computer that has a mini DisplayPort output, including the Mac Mini, right?
Thanks in advance for your support.

You're right, but I forgot to mention that the Samsung display is just an LCD monitor, so I don´t really need to get audio output for both connections
Currently, I use an HDMI-to-DVI adapter to connect the Samsung monitor, but I'd like to use the HDMI output to connect my LCD TV instead (and probably a home theater system in the future), and use the Mini DisplayPort output for the monitor, so that I can have a dual-display setup.
I asked this question, because I read the description for the Mini DisplayPort-to-DVI adapter in the Mexico Apple Store web page, and that description tells that only Macbooks support the adapter. In the US Apple Store page, it does tell that the adapter is supported by any Apple computer with a Mini DP connection, so I just wanted to confirm which description is true, to avoid confusions.
Anyway, I appreciate that you took the time to respond... Regards!!

How do I use a Mac Mini + Airport Express + Time Machine disk to backup another iMac

How do I use a Mac Mini + Airport Express + Time Machine disk to backup another iMac?
The question pretty much says it all.
I have a Mac Mini with an attached 3TB Hard Drive used for Time Machine Backups.
I have an Airport Extreme base station which services that machine plus several others.
I would like to backup my new iMac and a MacBook Pro to the Mac Mini.
What do I need to do on the mini to export that hard drive so that it can be used as a Time Machine target from the other systems?
All systems are running 10.6.8.

Well you would have to do backups over a network which is much slower and has highest chance of becoming corrupt. I think your best option would be to get an apple time capsule to act as a network and back if thats how you wanna do that

How to find out how many memory is used for NIO

is there any way to find out how many memory is used for nio in a virtual machine. ?
I know that is possible to find out how many total, free and used memory the heap has by using java.lang.Runtime#totalMemory...
We sometimes expect errors that it is not possible to create any more connections because of the NIO memory size but the heap is still ok. Today we had an error where 170mbytes of heap where left but it was not possible to create new tcp connections because of an exception:
javax.naming.NamingException: java.net.SocketException: No buffer space available (maximum connections reached?): connect
The number of TCP-Connections was ok (<500).
It would be very nice if someone knows how to find out how the amount of memory that NIO buffers use can be determined within Java 1.4.
best regards
benjamin

We have to use 1.4.2_03. This is because of the special environment we are running on.
We did also figured out that there are some NIO Memory Bugs but we since we are not allowed to upgrade the used Virtual Machine we have to live with these errors.
The problem that we currently have is within a Server and because of this circumstance we are trying to find a workaround or way to find out how many memory is allocated. If we would know how to get this value we could restart the servers as a workaround after the value reaches a threshold.
We are also very sad that we can`t easily upgrade/update to the latest 1.4.2 Version or the newest 1.5 to get rid of these NIO Bugs!

Mac Mini 2010 and Windows 7

Hello All,
I searched the forums to see if my question had already been answered, but I couldn't find it. My apologies in advance if this, in fact, is solved. I am having some issues with my installation of Windows 7 on my Mac Mini 2010 model 2.4Ghz Core 2 Duo. I used boot camp to create a partition, installed windows 7 64 bit from a copy that I bought from school, and it did install.
Problem 1
The problem that I am having is that the operating system states that 4GB of RAM is available and 3.5GB is usable. I currently have 8GB installed(Not factory, I purchased third party) and it reads fine in Mac OS X. Does anyone else have this problem or a similar one?
Problem 2
The screen will not expand fully in Windows 7. I have an ASUS 21.5in HD screen that will display up to 1080p connected to the HDMI connection on my mac. When I boot up, the screen will display in a smaller size(about 3/4 the size of the screen) while the rest of the screen is black.
What have I tried?
I have updated to the latest boot camp package on the Apple website to make sure I have the latest drivers for my NVIDIA GeForce 320M card.
I have tried playing with the resolution in Windows 7 to display the maximum possible resolution
I have made sure to install all Windows 7 updates.
Problem 3
I don't have full access to the monitor menu. When I touch the menu button, I can only change the brightness, sharpness, and that is it. I can't do anything about expanding the screen, moving the screen left or right, etc.(If I did have these options, then problem #2 would be solved).
Nothing has worked.
What do I think...
I am thinking that it has something do with the fact that I am running the screen from the HDMI, although I don't really know why. It could also be the monitor. I could try to purchase the Mini Display Port adapter to see if that offers a better resolution, more freedom with my monitor, etc. This would fix problem 2 and 3. I did order a 24" Apple Cinema Display which will be here in a few days. If everything works with that, then I guess I wouldn't have a problem anymore, but I think it should still work with my existing monitor.
As for the first problem, I am at a loss. Does anyone have any ideas?
Thanks for reading.

I completely agree with your assessment for Problem #1, but here we have it.
I will try re-installing and will also double check with the drivers for the monitor. Thanks for the advice. If all else fails, I will just use parallels.

How can i get mynew mac mini to use the drive in my old mac pro

When I first got my new mac mini it dosen't have an internal drive. So I hooked it up on the network and fire wire. I could use the superdrive in the mac pro just fine both itunes and the dvd player worked as they would with a internal drive. But now a couple of upgrade down loads later not so much. yes I can connect with screen share and can get the dvd player to play dvd's but still can't get itunes to use the superdrive. Iht exect disk icon in the apple menue bar use to open and close the super drive but now it reads "no disk" How can I get my mac mini to automaticly use the superdrive when i turn on the mac pro.
I've done all the easy things changing the order of start up and share settings and i sware it did work ok when i first hooked it up.

http://www.totalapps.net/mac/remote-disc-sharing-when-the-superdrive-doesn’t-wor k-2/
Mind you, booting off the external optical drive of another computer may not be practical because of the different operating system limitations of the computers. I would just purchase an external optical drive from http://www.macsales.com/ if you find it doesn't work.

How many memory slots on mac mini 2010?

Similar Messages

Maybe you are looking for