How Many NUMBER Fields Can SINGLE DATA BASE TABLE CONTAIN

Hi
One Database table contain 249 Fields.
Rewards Points if useful..
Regards
Nikunj Shah
Edited by: Nikunj Shah on May 13, 2008 1:08 PM

Similar Messages

How many key fields can we have in a DSO?

Hi,
how many key fields can we have in a DSO.is it 16 or any number of key fields can be used? If only 16 are allowed pls let me know how to add more key fileds (my requirement is 21 keyfields) .
Thanks in advance,
Praveen

Hi,
Thanks for the reply. Pls let me know the procedure to include 5 more key fields because i have 21 keyfields which i have to use.
Thanks&Regards
Praveen

How many key fields can we maintained in dso or ods

HI
pls let me know how many key fields can we maintained in DSO or ODS.
Thanks and Regards.
ASIM.

Hi,
Key fields can only be 16 you cannot exceed this. but if you have more key fields, you can combine fields using a routine for a key field
Max Data Fields - 749 data fields can be added in a DSO.
Regards,
Marasa.

How can I find a data base table containing a GUID, which is result of the macro's execution?

Hello,
please help me to understand how the macros work. I am facing database inconsistency. The CRM-system retrieves a GUID of an opportunity’s item and checks its existence. However, this GUID (here it is es_info-ref_object) does not exist. As result, an exception is triggered.
I am trying to figure out which data base table is responsible for the inconsistent data. Instead of SELECT statement, I see in the debugger that a macro retrieves the “guilty” entry .
macro_execute macro_msg_data_read_rea.
My Question: How can I find a data base table containing a GUID, which is result of the macro’s execution?
Thanks a lot
Andrej

When you save a PDF out of Distiller it doesn't just have different options, it's an entirely different program. It doesn't do things the same way, so it can't have the same options. Saving from Distiller is in many ways better, expecially in that transparency isn't flattened.
What specific options are you looking for?

Which data base tables contain SCM customer code

Friends,
I am writing an user exit for VA01/VA02/VA3/VA32.
I am getting the customer number from VBAK-KUNNR when I execute any of the above transactions.
According to functional sepecification, we can find SCM code in the data base table ADRC.
(we can fetch the data from ADRC table where ADRC-ADDRNR = KNA1-ADRNR; ( KNA1-KUNNR = VBAK-KUNNR))
I could not find SCM customer code in the table ADRC.
Please let me know the Data table and field to find the SCM customer code in SAP.

Hi Reddy,
 >> As in SCM the company codes exist in the table ' T001 '.
 Corresponding field for it is ' BUKRS '.
 >> U can use ' ADRNR ' as a key field in ' T001 ' table and
 relate with your KNA1- ADRNR using Joins for user exits.
Feel Free to ask any questions regarding this...
Hope it Helps...
Regards,
Dhayanandh.S
Message was edited by:
 DHAYANANDH SIVASANKARAN

Fields of the data base tables

Hi ABAP Gurus,
                 i am developing an sd module report and in that my input fields are   fkdat,
                vbeln,
                kunag,
                fkart.
and output fields are :
                   1)   vbeln
                   2) kunag
                   3) name1
                   4) fkart
                   5) description of fkart
                   6) netwr
                   7) excise
                   8) ecs
                   9) schess
                   10) excise + ecs + schess = total ex received
                   11) fi doc
                   12) fi year
                   13) exnum
                   14) exdat
                   15) excbed
                   16) ecs_py
                   17) schess_py
                   18) 151617 = total ex_py
                   19) fi doc ex
                   20) fi year ex
these fields i want in my output but can any one tell me which fields will appear in which table and the links among these tables
i know some tables : vbrk,vbrp,konv,j_1ipart2,j_1iexchdr.
pls help me .it's urgent .

Hi,
Retrive data from VBRK and VBRP Tables.
From Billing u can find all the Values.
Check invoice in VF03.
KONV is for condition types .
Based on KSCHL for condition types and kawrt for values.
Thjese 2 fields important for getting tax values.
Regards,
Narasimha
Edited by: narasimha marella on Jun 11, 2008 9:12 AM

Edit field in a Data Base Table

Hi Everyone,
I am trying to change field VERME(available stock) in LQUA table. The requirement is whenever the value is less than zero in VERME, we should change that to 0.
I know its not good to update the DB table directly, but there is no other alternative. The scope is very limited and I am trying to write some program just for this only purpose.
Have you guys any sample program for this requirement?
Thanks
Kumar.

Hi,
You can update a database table by first locking the table using Function module
ENQUEUE_TABLE_E
by passing table name.
Then update record in table using statement
update LQUA set VERME = 0
WHERE VERME le 0.
After this statement unlock the database table using function module
DEQUEUE_TABLE_E.
Reward points if answer is helpfull.
Regads,
Mukul Sharma

How to insert data from different internal table into a data base table

hi all,
I want to insert a particular field in an internal table to a field in a data base table.Note that the fields in the internal table and database table are not of the same name since i need to insert data from different internal tables.can some one tell me how to do this?
in short i want to do something like the foll:
INSERT INTO ZMIS_CODES-CODE VALUE '1'.
*INSERT INTO ZMIS_CODES-COL1 VALUE DATA_MTD-AUFNR .(zmis_codes is the db table and data_mtd is the int.table)

REPORT ZINSERT.
tables kna1.
data: itab LIKE KNA1.
data lv_kUNAG LIKE KNA1-KUNNR.
lv_kuNAG = '0000010223'.
ITAB-kuNNR = lv_kuNAG.
ITAB-name1 = 'XYZ'.
INSERT INTO KNA1 VALUES ITAB.
IF SY-SUBRC = 0.
WRITE:/ 'SUCCESS'.
ELSE.
WRITE:/ 'FAILED'.
ENDIF.
Here lv_kunag is ref to kna1 kunnr passed in different name
In internal table .
Try and let me know if this logic dint work.

Data Source for BSEG Data base table

Hi Every one,
I need to create a data source for the data base table BSEG (Function Module Extraction).
I have followed below steps.
I have created extarct structure which contains all the fields of BSEG Data base table.If I save the data source I am getting error.
If I remove all the currecy fields from extract structure, I am able to activate the data sorce.
So Could you please explain me how to extract currency fields.

Hi,
Firstly, can you explain why you need a generic extractor for BSEG? There are already 2 datasources for BSEG, they are:
0FI_GL_4
http://help.sap.com/saphelp_nw70/helpdata/en/0c/b4973c115a6f3ae10000000a114084/frameset.htm
0FI_GL_14
http://help.sap.com/saphelp_nw70/helpdata/en/49/5700570223413085021a8b4ef1087a/frameset.htm
To use 0FI_GL_14, you should use the new GL in ECC side.
On the other hand, for your problem, your problem may occur if you did not give the reference unit field of your currency field in your extraction structure. when you double click the the currency field, you will see the ref. field, give the reference unit field in this area.
Regards.

How Many Phone Numbers Can A Single Contact Have?

Hello,
How many phone numbers can be assigned to a single contact?
Somehow my phone number has gotten onto a shared telemarketers data base and I have been getting at least a call a day. (Yup, I have even been on the Do Not Call Registry for a few years.) It seems as though you can only block 30 individual contacts, so I created a "Do Not Answer" contact and dumped all of the restricted numbers into it. So far I have 35 numbers. I am just wondering how far that I can carry this strategy for my sanity.
Peace,
Dr. Z.

In my experience, you can assign as many numbers as you want to a contact.

How to control the name of custom field in data base table, added by AET

Hi,
I have added the one custom field by Application Enhancement Tool (AET).
The name of custom field has been added in the data base table as ZZFLD000004 by AET.
I need to add the some meaningful name like that ZMYPROB.
How can I control the name of custom field in the database field through AET?
Thanks,
Amit

Got the answer.
Need to click on the Enable Expert mode, then custom field name will be editable.

I have a lion server set up to host storage for time machine backups. Is there a limit to how many different computers can back up to the single server to back up. I am only backing up the users folders . The backup drive is an external Drobo with 6 TB.

I have a lion server set up to host storage for time machine backups. Is there a limit to how many different computers can back up to the single server to back up. I am only backing up the users folders . The backup drive is an external Drobo with 6 TB. Right now it seems to back up my users all day long. I set their time machine interval to every 5 hours but it still runs all day long and is very slow. Server is on a new Mac Server mini.

AFAIK, there is no user limit.. it is simply a question of the network load. AFP is a fairly clean protocol.. but TM is not.. it does a lot of testing of the backup.. infact your setting of 5hour gap could well make it worse.
I would sort out the clients that are doing 100GB backups to a different backup location.. no matter how fast your network.. 100GB takes time to backup.. and over wireless forever.. it will never end.
I guess some of these clients are on wireless?? I would separate the TM of wireless to those that are wired. No more than 4 or 5 wireless clients to a target device. Otherwise you are saturating your network with backup data. And use 5ghz.. so close by.. it is much faster than 2.4ghz and you will get much better transfer rates.

How many mac-addresses a single port can store ?

How many mac-addresses a single port can store ?
And also what is the max limit for mac-addresses on a switch ?
Regards,
Chandu

Hi,
I don't think there is a limit per port.
The limit is the max number of entries in the CAM table so if for example the CAM table limit is 8000 and you already got 7200 entries you can have the 800 enties on different ports or on one port.
Regards
Alain
Don't forget to rate helpful posts.

How many licensed users can you have under one serial number for Adobe Photoshop Elements 9?

I would like to know how many computers I can install my Adobe Photoshop Elements 9 on under one serial number? Thank you!

If you purchased the boxed product you can even install one on a PC and one on a Mac.

How many ADFS farms can you have in a single forest/single domain?

Hi
I may have some terminology incorrect...please let me know if I do. :)
My question is, how many ADFS farms can you have in a single forest/single domain? If you want to know why I am asking...please read on.
We have 1 ADFS Farm and we are looking adding services to it. However not every cloud vendor provides a "Identity Broker" with there services.
We have a consultant that is advising that we need to enable a SAML-based IdP-initiated single sign-on (SSO) ie using "IdpInitiatedSignOnPage"
However to do this we need to modify the ADFS website to have "drop down" list so the user can select the "Relying Party" and then authentication with them.
This means we are exposing a list of every company/party we have federated with. The exposure of this information, is deemed a security concern by our company....which I agree with.
So the consultant advises that we need a separate ADFS farm. I have searched online, but haven't found any information that confirms multiple ADFS farms can be implemented in a single forest/single domain.
Thanks for reading and if you have any other suggestions...I'd appreciate it.
Nyobi

This is not exactly FIM related question - there is ADFS forum available on Technet. However - technically there is no limit of ADFS farms in a forest \ domain. It is just a service which uses AD and is not altering it in any way or storing some forest-wide
information like Exchange. So you can setup two ADFS services in single forest - no problem.
If it is a best solution to your problem? I can't say with that limited information but maybe just customization of pages on ADFS side would be enough?
Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl

How Many NUMBER Fields Can SINGLE DATA BASE TABLE CONTAIN

Similar Messages

Maybe you are looking for