How many Oracle Licences required ?

Hi,
Can somebody help me in understanding the number of oracle licences required for the following server specifications :-
Server is SUN V890 4x UltraSparc IV DualCore running Solaris 9.
Please be elaborative , as I need to understand and learn, how is it being calculated.
Regards
Sumit

If you go to http://store.oracle.com, choose your country, and then choose Licensing Definitions you will see text along the lines of
sumitsingh3 wrote:
Processor: shall be defined as all processors where the Oracle programs are installed and/or running. Programs licensed on a processor basis may be accessed by your internal users (including agents and contractors) and by your third party users. For the purpose of counting the number of processors which require licensing for a Sun UltraSPARC T1 processor with 4, 6 or 8 cores at 1.0 gigahertz or 8 cores at 1.2 gigahertz for only those servers specified on the Sun Server Table which can be accessed at http://oracle.com/contracts , “n” cores shall be determined by multiplying the total number of cores by a factor of .25. For the purposes of counting the number of processors which require licensing for AMD and Intel multicore chips, “n” cores shall be determined by multiplying the total number of cores by a factor of .50. For the purposes of counting the number of processors which require licensing for all hardware platforms not otherwise specified in this section, a multicore chip with "n" cores shall be determined by multiplying "n" cores by a factor of .75. All cores on all multicore chips for each licensed program for each factor listed below are to be aggregated before multiplying by the appropriate factor and all fractions of a number are to be rounded up to the next whole number. When licensing Oracle programs with Standard Edition One or Standard Edition in the product name, a processor is counted equivalent to a socket.
If you follow the link again and get to the Sun Server table, I don't see a V890 listed. I also don't believe the V890 is using the UltraSPARC T1 processor, so you would end up using the 0.75 multiplier rather than the 0.25 multiplier.
Given that,
4 sockets * 2 cores per socket * 0.75 = 8 * 0.75 = 6 processors
Justin

Similar Messages

  • How many OracleAS Portel 10g Servers for 200users?

    How many Oracle Application Server Portal 10g Servers do I require for 200 users in production environment...

    Maybe describe what type of portal you have? (I am curious also) Somethings to think about:
    1) How many concurrent users will you have? peak times?
    2) How many logins/sec will you have? peak times?
    3) What type of portlets will you be using (HTML mostly, or portlets whiuch actually do something)?
    Here may be some other useful information. Unfortunately things are a little more complicated then saving N people requires X machines.
    http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/ARCHITECTURE/SIZING_OVERVIEW.HTM
    http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/ARCHITECTURE/SAMPLE_SMALL_SIZING.HTM
    http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/ARCHITECTURE/SAMPLE_MEDIUM_SIZING.HTM
    http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/ARCHITECTURE/SAMPLE_LARGE_SIZING.HTM

  • How many Job_queue_processes are required?

    Hi all,
    I want to know how many Job_queue_processes are required to drive 50 schedulers.
    According to AQ manual. it says "at least 2 for message propagation" and "set higher values if there are many queues", however, there is no sizing guidelines.
    If you have an experience to create many schedulers which has multiple destination queue, please let me know what number you set to job_queue_parameters.
    NOTE: In our environment, we have 50 schedulers, and each one of it has 3 destination queues.
    Thanks in advance.

    Hi ennisb,
    Now we have 50 schedulers, and we need to propagate 100 messages per second in total. Required throughput is not so high, but we want to set latency=0.
    I think it is better to set job_queue_processes at least 50. However, I wander whether I need extra jobs to realize better performance and/or stability...

  • How many SLD's require for 2 solman system requirements?

    Scenario1:
    One solman system for entire landscape->One SLD is required.
    Is this SLD should be a seperate system or can be within solman?
    Scenario2:
    One solman system for DEV/QAS and other solman system for PRD.
    How many SLDs are required? Can we manage with single SLD?
    If two SLDs, Then both should be seperate systems. i.e, One SLD -> DEV/QAS Solman, Another SLD ->PRD Solman.
    If only one SLD, Then it should be seperate system or can be within solman?
    We do have EP in client enviroinment. Can we use SLD of EP?

    Hi,
    you can use one SLD for all your systems if you want. You can either use an existing one or the one which comes with Sol Man. That's up to you.
    Any scenario is possible.
    /cheers

  • HT201328 If IMEI No. is submitted for the unlocking process.. How many days is required for unlocking.?

    Guys Can u plz.. Help me to knw about this..
    If IMEI No. is submitted for the unlocking process.. How many days is required for unlocking.?

    It varies from carrier to carrier.
    The best person who would be able to answer this question is the customer services representative of your carrier.

  • How many server licences do i need

    I am designing a small data center with physical servers connected to a SAN which is then backed up to a NAS for backup. The physical server will be running 13 critical application using VMware for high availability. How many window server licences would
    i need to purchase. Is it one per physical server? or would i need one for each VM also. 
    Thanks 

    Hello,
    if one VMWare host should run more then 2 VMs you need a Windows Server 2012 R2 Datacenter edition (unlimited versions from Windows VMs on the host) from Windows or 7 Windows Standard licenses (max. 14 VMs).
    Keep in mind that processors count into the license requirements.
    "...using VMware for high availability..."
    This means that you should have at least 2 VMWare hosts which have the RAM and processors to run in caseof hardware problem from the other host ALL VMs.
    So you are now need at least 2 Windows Server 2012 R2 Datacenter licenses or 14 Standard editions.
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • How many minimum VLANS required for wireless

    Can management, ap-manager, dynamic interface(user defined) and LWAP are in the samesubnet.if not how many required.
    Just correct me if am not wrong, 1.management, ap-manager and LWAP can be in a single subnet
    user defined interfaces can be in a different subnet, so totally two subnets.
    2.management, ap-manager can be in one subnet, LWAP in another subnet and dynamic interfaces in different subnet so tatally three subnets.

    if you mean with lawpp the ap's then your statements are correct

  • How to find out how many CPUs are required from SAPs

    Hi,
    I am trying to do sizing for SRM product.
    Now questions is
    1> How to determine no.of CPUs , kind of CPUs freq. etc from SAPS.
    Is there any formula for it?
    Even we ask this to hardware vendor, will verndor be aware of SAPS. How can vendor relate CPU details to SAPS?
    Best Regards,
    Tushar

    Hello Tusher,
    > How to determine no.of CPUs , kind of CPUs freq. etc from SAPS.
    The SAPs is determined by running the SAP SD benchmark. At the end of this benchmark you will get a value of SAPs and could determine the SAPs for each core. So you need to specify how many SAPs you will need and the hardware vendor can configure you a server environment, that is possible to handle your requests.
    > Even we ask this to hardware vendor, will verndor be aware of SAPS. How can vendor relate CPU details to SAPS?
    For sure .. if it isn't .. go away and search for another.
    Regards
    Stefan

  • Back Up iPod: How Many Disks Are Required

    I have an iPod Nano 2nd Gen. I want to back up @ 500 songs to CDs. Before I start I was wondering if anyone could tell me how many CDs I would need.

    Thanks. Was never able to figure out the conversion between KB and MB. The average file size is 5,600 KB. So how many disks to you think it will take.... 5,600KB x 480 songs = 2,688,000KB. Appreciate it!

  • How many channels are required for one G711 Call on T1 PRI

    Hi Everyone,
    Just have a basic question.
    Lets say i want to make one G711 call which is compressed. below will be the bandwidth required.
    Calculation:
    Total packet size (bytes) = (Layer 2 Ethernet header 6 bytes) + ( compressed IP/UDP/RTP header of 2 bytes) + (voice payload of 20 bytes) = 28 bytes. Total packet size (bits) = (28 bytes) * 8 bits per byte = 224 bits
    PPS = (64 Kbps codec bit rate) / (160 bits) = 409 pps
    Bandwidth per call = voice packet size (224 bits) * 409 pps = 90 Kbps
    From what i know, 1 channel on a T1 has a bandwidth of 64kbps.
    Question:
    Does this call require two channels to start the conversation?
    Will this call be successful?
    How will one channel accommodate this call?

    No, 64 kbps basically matches the payload, and the TDM T1 trunk needs no IP header overhead, so it matches, even if it did not you are trying to compare apples and oranges as when you send the call to channelized T1 circuit it's TDM based (bandwidth is irrelevant), if by T1 you meant data T1 then the circuit would not be channelized and would provide total 1.544 mbps.
    Chris

  • How Many CD's required for backup?

    How can I approximate the number of CD's I will need to backup my itunes library? My purchases account for about 1 Gig. Does the backup to disc feature do a "one to one" or is there a level of compression?

    Thank you. The backup worked quite quickly and yes it needed only 2 CD's.

  • How many licenses are required to be bought?

    Hello..
    We are a section of ten in our organization with 1000+ manpower. To make a lot of work lighter, we have decided to go for Acrobat Pro. Is it possible to get license for all ten of us? And if yes, how much would it cost?

    You can click on the business link on this page and get the details about the volume licensing.
    or you can goto the following link:
    http://www.adobe.com/volume-licensing/business.html
    here you will get the information about different type of licenses avaialbe and details for enrollment. Hope this helps.

  • How many Communication Channels required for File--Bpm(SAP R/3)--File

    Hi
        Pl..help me on this
        I am doing the following scenario File 2BPM 2 File
        i.e File -
    BPM(ASync)
            BPM -
    SAP R/3(Sync)
            SAP R/3 ---BPM (Sync)
            BPM ---File (Async)
        For me it looks three CC's  but still i am not confident
        Can any one explain me on this
    Adv thanx
    Prasad K

    File(<b>CommChannel 1 -File Sender</b>) -
    > BPM(ASync)
    BPM -
    > SAP R/3(Sync) (<b>CommChannel 2 - RFC Receiver</b>)
    SAP R/3(Comm Channel 3 -RFC Sender) --- > BPM (Sync)
    BPM ---> File (Async)(<b>CommChannel 4 - File Receiver</b>)
    <i><u><b>So a TOTAL of 4 Comm Channels.</b></u></i>
    Since Sinchronous so 4 channels .. if you use idoc adapter instead of RFC 3 channels will do
    Cheers,
    Himadri
    null

  • How many bytes are required to store an integer?

    Hello,
    I ran this statement: DATA x(2) TYPE i value 234.
    I thought the value of x should be 23, because i defined it with the lenght of 2 bytes.
    In the sap help i found that the lenght of an integer is 4. But i can define DATA x(5).
    I am little confused.
    Thanks,
    Efren

    No you confuse between type "I" integer, stored binary mode, and type "N" stored in character mode
    23231234 is stored
    - "01627B02" in binary/integer - TYPE I
    - "23231234" in numc/char non-unicode - TYPE N  on a non-Unicode system
    - "0031003200330034" in numc/char unicode  - TYPE N on a Unicode system
    Remarks :
    - TYPE N allows a length declaration.
    - TYPE I allows a range from -2147483648 to +2147483647 (4294967296 different values 2^32, minus sign)
    Regards,
    Raymond

  • How many Domain Controllers required to support Branch sites?

    We are planning to place 1 Domain Controller at HQ
    with one RODC at each branch location.
    There would be no more than 10 users at each branch location, none of which would be physically located at the branch site.  They would all be transient.
    My question is with only 5 possible Branch locations will 1 DC be able to support this environment?  I realize
    normally there would be two DCs at HQ for redundancy
    but that is not an issue for this scenario.
    Thank you,
    Barb
    bc

    Hi,
    About placing a domain controller in the branch office or not. This is decided mostly by the quality of the wide area network (WAN) link between your branch office and the hub site. If the WAN is highly reliable and available and if the performance of directory-enabled
    applications and logons in the branch office is acceptable, you do not have to place a domain controller at that branch office location.
    Deciding Which Type of Domain Controller Meets the Needs of a Branch Office Location
    http://technet.microsoft.com/en-us/library/dd736142(v=ws.10).aspx
    Regards.
    Vivian Wang

Maybe you are looking for