HOW MANY PEOPLE HAVE BOUGH THE VIDEO IPOD AT BEST BUY?

Have many people have bought their new ipod videos at best buy and how is their return policy and everything etc.....

I would strongly recommend the warranty (3 year not 2). It has the following:
-COMPLETE coverage of any failure due to wear and tear (suggesting that if the screen becomes so scratched that it interferes with usability and therefore the unctionality, in theory, they should replace it) it is also stated that it protects faults in MATERIALS (the casing). The screen being scrathed is also the casing not the screen, since the screen it under the casing, so the scrathing could also be attached to this clause, justifying replacement.
-Power Surge protection (unlikely, but a plus)
- it states "This plan is inclusive to the manufacturer's warranty; it does not replace the manufacturer's warranty, but provides certain additional benefits during the term of the warranty. After the Manufacturer's warranty expires this plan CONTINUES to prived the benefits of the manufacturers warranty along with additional benefits" this is the great part of it.

Similar Messages

  • How do I find out how many people have seen my video?

    Wondering if it's possible to see some stats on my video? Views, uniques, average watch time, etc?

    Hello,
    I am glad to hear that your problem has been resolved.
    If you have not already, please mark this thread as solved by marking the solution.<br>
    This will help other users experiencing similar problems find help faster and more efficiently.
    I hope you continue using our products and thank you for contacting Mozilla Support.

  • Have you officially joined BPX?  How many people have you invited?

    For those who are watching the Business Process Expert "general discussion" forum:
    The first question is: <b>Have you officially joined the BPX Community here? </b>
    If so, <u>thank you</u>.  You are one of the 8,328 people who have already joined in only the first four weeks of this community being available.  Note, too, that we're still in "sneak preview" mode so we haven't even done any announcements or awareness campaigns!  You're in on the "ground floor" with visionaries and leaders. 
    If you're not an official member yet, please join ... just go to the top of the page in the header under "Profile Management," see the category for "Update Profile," and check the box at the very bottom of that page that says "I would like to join the new Business Process Expert (BPX) Community."  Of course it's free and you get the benefits of posting forum questions and answers, blogging, etc. etc. 
    Please also sign-up for the newsletter while you're already on that page.  More than 100,000 people already subscribe and find it valuable.  We send a newsletter approximately every two weeks to highlight just a few of the new items and topics -- mostly as a reminder to return to the online community area(s) if you're not already in the good habit of doing so. 
    Second question is: <b>How many people have you referred to this new community with the recommendation to join?</b> 
    If you've invited at least three people who have joined, then "<u>thank you</u>!"  If they are new members of BPX and SDN (and if they used your name/email as a referrer when they joined), then you received award points as our thanks. 
    If you haven't yet invited at least three colleagues to join, please do so.  We think it'll help them in their jobs and careers, and we think it'll help you in your work with them (they're smarter, better informed, on the same page with their colleagues -- including you...). 
    Thank you for your membership, participation, and for spreading the word. 
    Mark Y.

    I have had numerous issues. Originally, I couldn't get video to work at all in Leopard (worked fine in Tiger). I just recently did all of the following things:
    Set QT STreaming to 1.5
    Set bandwidth (in iChat) to 500kbps (Comcast)
    Deleted iChat prefs and ichatagent prefs
    Set parallels network to "host only" (was on shared)
    Reset PRAM
    Reset security port to 443 (in iChat prefs, server settings)
    Restart iChat (obviously)
    Right now, all of my buddies are currently offline, but I did test with apple's auto-bots and interestingly, I'm getting video to work with appleu3test01 and appleu3test03, but I get the same connection problem as before with appleu3test02 ("There was a communication error during your chat"). I'm curious what's different about this bot's settings. I'll report more when I get to test with a real person.

  • Using powershell to find out how many people are using the on-prem SkyDrive

    Hi
    Is there a way of using powershell to find out how many people are using the on-prem SkyDrive?
    Thank you.

    Hi,
    According to your post, my understanding is that you wanted to use PowerShell to find out the users who use the on premise SkyDrive.
    As this is the forum for SharePoint Server, I recommend you post your question to the forum for PowerShell or SkyDrive.
    Windows PowerShell forum:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverpowershell
    SkyDrive forum:
    http://answers.microsoft.com/en-us/onedrive/forum/sdsignin?tab=Threads
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • Wonder how many people have left.

    Any stats? I would be curious how many people have left these forums. How are they doing? ;)

    Cindy- wrote:
    It would be my guess Adobe wanted the oldies to disappear. I could draw no other conclusion.
    The disappearance of the good old regulars – including a couple of major stalwarts in the last few days – is only a by-product of the adobe desire to promote thier own idea of a "community" which, as we know, is a carry-over from an earlier system and has now been extended to things like product Help pages as well as these forums.
    This "community" with its silly titles and misleading points system has alienated the true community of regular volunteer helpers from the industry, to the extent that, in my estimation, only about 10% of those people remain. Those that have left have not been replaced and never will.
    Their contributions, and the valuable discussions which they stimulated, will be sorely missed by those who come to the forums for help and to learn. What remains is a pathetic rump.
    The misguided management style of adobe has lost them an asset which had cost them nothing and was worth millions.

  • Can I see how many people have visisted my MobileMe Personal Domain

    I've set up a website using iWeb and it's been published in my personal domain using MobileMe, is there anyway of checking how many people have visited it?

    http://www.statcounter.com/iweb/
    Joe

  • How many people have veiwed my site?

    How can I put a display on my site that shows the number of times veiwed?

    Did you read the directions on that page? It explains how to add Statcounter code. You have to add it after publishing.
    Here are some basic instructions for making html changes after publishing in iWeb:
    1. Type a placeholder in place of where you want the item to go. i.e. CODEGOESHERE or something like that. Publish your site via iWeb
    2. Find your html files.
    Go to iDisk/Web/Sites/iWeb/Sitename/Pagename.html
    (If you publish to a folder, look in the folder you selected or try looking in your Sites folder of your home folder. )
    There are two ways to handle accessing your iDisk.
    Method 1:
    Turn on local copy of your iDisk in System Prefs, with or without automatic syncing.
    If you publish your site via iWeb, now the updated pages exist online but the old pages are on your local iDisk. You need to sync (automatically or manually) to get the new pages on your local iDisk (on your computer).
    Then you can open the updated files, make your html changes in Text Edit or whatever program, and SYNC AGAIN (automatically or manually) to update the online version of the site to match what you have just changed on your local iDisk
    Method 2:
    Mount the iDisk when needed via the "Go" menu in Finder. This is the ONLINE VERSION of your iDisk, not a local copy. When you publish your site via iWeb, the changes INSTANTLY appear on the iDisk on your desktop. If you make html edits or other changes, they appear INSTANTLY online.
    I recommend Method 2 - much easier!!!
    3. Make the html changes.
    You can open the html files generated by iWeb in any text or html editor. In TextEdit, to view the code in an HTML file, choose File > Open and select "Ignore rich text commands." Then locate the .html file (as described in step 2) and click Open.
    Make your changes (i.e. replace CODEGOESGERE with your code!) and don't forget to save your changes (not Save As, just Save)!!!
    4. Remember, if you make a change to a page like this post-publishing, and later re-publish, you have to make the html changes again! Set up a Find/Replace command in MassReplaceIt and you can do this very quickly. You can save your queries so you can make all of your changes with one click the next time you save.
    Download here:
    http://www.hexmonkeysoftware.com

  • How Many People Have Found An Alternative?

    I'm sick and tired of this whole falure of an internet browser we call Safari. Plug-ins don't load, or can't be found, or can't be downloaded. Contents show funny, application closes for no reason at all, performance is unstable. Man, I'm sick of this browser and there isn't one updated version of Internet Explorer right now.
    Don't get me wrong, I've been using Mac since before the Internet days, but it just seems the move away from IE was reaaaaally wrong. Anyone has any alternative suggestions for other Mac compatible browsers to use other than ths failure? Would greatly appreciate this.

    Content failure isn't necessarily (and usually) Apple's doing. You need to look at the coding created by developers too.
    Safari is very stable for me. However, I use Firefox when it comes to specific needs, e.g. viewing Yahoo video content, which thanks to Yahoo, does not work in Safari (possibly due to music and other rivalry issues with Apple).
    One last thing - your tag says 10.4.3. If true, update to 10.4.6, using the combined update if you want the latest version of Safari. This is also a more stable version of OS X Tiger. Remember to repair permissions using Disk Utility once the update installation is finished.
    iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD   Mac OS X (10.4.6)   LaCie 160gb d2 HD Canon i960 printer

  • HT201272 how do you find how many people have downladed your app?

    Any ideas wher apple Hides their analytics for apps that have been downloaded?

    You get sales statistics and other information through your iTunes Connect account.
    Regards.

  • Do a search on 6070, see how many people have prob...

    These phones are duds. They will not connect, and Nokia should upgrade all customers who paid good money for such a **bleep** product.

    What do you mean - "not connect"? That doesn't really give enough information for anyone to help you.
    And out of the 70 000 or so posts here about 150 seem to be about the 6070.
    All those who believe in psychokinesis raise my hand.

  • HT3228 My mail icon shows how many I have, but there isn't any list on the left side.  I will read your answers on another computer.   I can send OK.

    My mail icon shows how many I have, but the screen is blank with no emails listed on the left side.  They used to be there.  I can send OK.
    Any suggestions?  I will read replies on another computer until this is resolved.

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • Curious, How many people use the IMAQ Vision package?

    Yeah, just wondering... how many people here use the IMAQ Vision package on a regular basis?
    I do, for one.

    Add one to the counter
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        

  • Is the video ipod bad

    There are so many bad posts about the video ipod i want to know if it is worth the money? seriously

    I've had mine for a week now, and really have had very little problems. Between it and locatiofree tv I got for my psp those two new toys have been taking a good potion of my time.
    Ok, so without further ado here is how I spent the past week.
    1) searching for a video converter for my pc, brought 3 , none worked for h264 video all worked for mp4 video,
    2) downloaded and sucessfully created videos with freeware encoders.
    3) spent loads of time trying to figure out why encoders didn't work. I'm a software engineer,
    4) brought 2 and downloaded 3 free mac converters. all worked as advertised.
    5) converted about 20 tivo/replaytv mpegs to mp4/h264 and uploaded to the ipod.
    6) developed a nightly batch encoding scheme utilizing our underused mac mini
    7) connected ipod to tv set with av cables
    8) figured out a way to stream ipod videos to psp via locationfree tv basestation
    In short some fuustration and a lot of fun... How was your week???

  • How can I find out how many podcasts have been downloaded?

    My friend and I have been making our podcasts available on Itunes. Is there any way to find out how many people have downloaded?

    Log into your iTunes account on a Mac or PC and check the Purchase History in your account profile information.

  • I have deleted my library on my ipod by accident (how many people must say that). I have a smaller library with my laptop here in qatar, but can I re install my music from my pc at home in uk, from Qatar?

    I have deleted my library on my ipod by accident (how many people must say that). I have a smaller library with my laptop here in qatar, but can I re install my music from my pc at home in uk, from Qatar?

    " When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
    Correct.
    " How can I get that music to show up in my library now on my new computer?  "
    Copy it from your old computer or your backup copy of your old computer.
    The sync is one way - computer to ipod.

Maybe you are looking for

  • Calculating value per second

    Hi all. I need to just calculate and save the values per second in the variable that how many times per second a variable is being revieved in the method as a parameter and then show that progress as int / second in the progress bar public void metho

  • Nvidia settings not saves and applied on setup

    I have this problem using nvidia settings for the nvidia driver 295.33-1.  I am trying to tweak gamma levels and varius otehr settings using nvidia control panel.  I save the settings in .nvidia-settings-rc in my home folder, but when I log out the s

  • To know How to Use shp2sdo tool

    Hi I want to Insert some shape files into my databse. I Have shp2sdo tool. I didn't Understand how to insert using that tool. I am Very new to Oracle Spatial. Can any one please help me Please tell me in detail Now am using Oracle 9i. Thank you In Ad

  • Opening RAR and TAR files

    I download alot of music on albumbase.com. This requires a file extracter or file expander called "WinRAr." The problem is, it's only for windows. Can anyone help me? Thanks!

  • Error for COM routine (Return code 40028)

    Dear Friends, Need your support in order to tackle this issue. Am working on SCM 4.1 ,Demand Planning.When you load the data in to the planning book you get the following error at the bottom: "Error for COM routine using application program (Return c