How many physical Network Adapter required for to implement NVGRE Gateway ?

Hello Guys,
Would like to know how many physical Network Adapter required to implement network virtualization including the technologies such as Windows Azure Pack| system center 2012 R2 & Hyper-V 2012 R2.
Thanks
NM-BG

A quick search of TechNet will turn up all sorts of step-by-step and overviews and blogs with lots of information about how to configure and setup. Minimum of two. Actual configurations may vary according to business needs and requirements.
. : | : . : | : . tim

Similar Messages

WAAS Inline Network Adapter Required for 674 Appliance Inline Mode?

Is an Inline Network Adpater required to setup a WAAS 674 Appliance in Inline Interception Mode or can the two inbuilt interfaces Gi1/0 anf Gi2/0 be used?

Hi,
You definitely need an Inline Adapter to setup WAAS 674 for inline interception mode. The built in Gig interfaces cannot be used for inline interception but can be used for WCCP or PBR. Inline adapter comes in a group LAN port and a WAN port.
Regards
Kiran.

How many large install licenses required for a 5.x deployment?

I have been trying to determine the correct license requirement for a 5.x install. There will be 1 primary server and six secondary servers. It is very clear that I need the base license for each ACS instance, but the documentation notes that for greater than 500 devices (IPs) that a large install license is needed for each ACS deployment. Does this mean that each ACS appliance instance will require a unique Large Install license or I only need one license (presumably installed on primary) and that will cover the IP requirements for all my secondaries?

On a single license is required for a deployment.
The large install license is installed on the primary and gets replicated to all the secondaries in the deployment that are connected to that primary

How many XI servers should require?

Hi Experts,
In real time scenario..how many XI servers should require? and How many SLD's?
Shall we maintain the same XI system for Dev and QA or else separate systems.
And also once done QA then how to send this to Production?
My mail id:[email protected]
Thanks in Advance.

Hi,
You Can Maintain One SLD . this is Preffered
You Can Maintain Separate Servers For DEV QTY PRD
Transporting ---
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --Overview of Transition from Dev to QA
Reward Points If Helpful
Regards
Sesh

How many HDD and max capacity for 2.66GHz model?

i was wondering how many physical hard drives can be installed in the 2.66GHz model of the iMac? also, is it possible to install more than 750GB? i noticed on the iMac specs page that the option for 750GB+ hard drive is only available on the 2.8GHz and higher.

Ahhh, well that's a new one on the market.
The iMac has Firewire ports (one of which is FW800, I believe, on the newest models) so you can add more storage externally. If you put in a larger drive you will need an external one at least the same size or larger for backups. If you plan to use Time Machine for backups then you need backup capacity about twice the size of the main hard drive. That means an external RAID array to provide 2 TBs to backup a 1 TB drive or 3 TBs for that big Seagate drive.

How many Physical CPUs Arch Linux Supports?

How many Physical CPUs does Arch Linux Support, the traditional 2?
Can it support 4 or more Physical CPUs, How?
By Physical CPUs I take RedHat deffinition :
Red Hat defines physical CPUs equivalently to sockets, so a multi-core and/or hyperthreading CPU is counted as a single CPU or socket when determining whichedition of Enterprise Linux to deploy.
Thanks

Let's put it this way.
Linux can likely support more cpu's than you can afford.
That is, unless you are super rich..
If that is the case..then by all means.....
....donate!
EDIT: After some peeking around.. I found this.
SGI Altix 4700 incorporates the shared-memory NUMAflex™ architecture, which simplifies software development, workload management and system administration. It supports up to 512 processors under one instance of Linux and as much as 128TB of globally shared memory. Supporting these powerful capabilities is the NUMAlink™ interconnect, which leads the industry in bandwidth and latency for superior performance on cluster applications. The SGI Altix 4700 represents a versatile solution for shared or distributed memory applications of any scale.
Likely SGI has a few tweaks that haven't percolated into the mainline kernel yet (pending or rejected)..But sgi usually pushes the high end mutiprocessor systems..
So.. around 512?

How many SECONDARY INDEXES are created for CLUSTER TABLES?

how many SECONDARY INDEXES are created for CLUSTER TABLES?
please explain.

There seems to be some kind of misunderstanding here. You cannot create a secondary index on a cluster table. A cluster table does not exist as a separate physical table in the database; it is part of a "physical cluster". In the case of BSEG for instance, the physical cluster is RFBLG. The only fields of the cluster table that also exist as fields of the physical cluster are the leading fields of the primary key. Taking again BSEG as the example, the primary key includes the fields MANDT, BUKRS, BELNR, GJAHR, BUZEI. If you look at the structure of the RFBLG table, you will see that it has primary key fields MANDT, BUKRS, BELNR, GJAHR, PAGENO. The first four fields are those that all cluster tables inside BSEG have in common. The fifth field, PAGENO, is a "technical" field giving the sequence number of the current record in the series of cluster records sharing the same primary key.
All the "functional" fields of the cluster table (for BSEG this is field BUZEI and everything beyond that) exist only inside a raw binary object. The database does not know about these fields, it only sees the raw object (the field VARDATA of the physical cluster). Since the field does not exist in the database, it is impossible to create a secondary index on it. If you try to create a secondary index on a cluster table in transaction SE11, you will therefore rightly get the error "Index maintenance only possible for transparent tables".
Theoretically you could get around this by converting the cluster table to a transparent table. You can do this in the SAP dictionary. However, in practice this is almost never a good solution. The table becomes much larger (clusters are compressed) and you lose the advantage that related records are stored close to each other (the main reason for having cluster tables in the first place). Apart from the performance and disk space hit, converting a big cluster table like BSEG to transparent would take extremely long.
In cases where "indexing" of fields of a cluster table is worthwhile, SAP has constructed "indexing tables" around the cluster. For example, around BSEG there are transparent tables like BSIS, BSAS, etc. Other clusters normally do not have this, but that simply means there is no reason for having it. I have worked with the SAP dictionary for over 12 years and I have never met a single case where it was necessary to convert a cluster to transparent.
If you try to select on specific values of a non-transparent field in a cluster without also specifying selections for the primary key, then the database will have to do a serial read of the whole physical cluster (and the ABAP DB interface will have to decompress every single record to extract the fields). The performance of that is monstrous -- maybe that was the reason of your question. However, the solution then is (in the case of BSEG) to query via one of the index tables (where you are free to create secondary indexes since those tables are transparent).

How many devices can you use for your itunes account?

how many devices can you use for your itunes account?

PT wrote:
Macistotle wrote:
Unless you have DRM still haunting your tunes ... Then you can only use those songs on 5 devices. Otherwise, connect as many as you like (as stated above).
No, you can sync your DRM tracks to an unlimited number of iPods (but only authorized to play on 5 different computers/user accounts)
Patrick
So I can sync two iPods to my iTunes account and sync the same digital copy movies that come with some o' my DVDs to both ipods? Do movies make a difference really, DRM-Wise? Thanks in advance.

How many implimentations can be done for a single BADI definition?

How many implimentations can be done for a single BADI definition?
Is there any restriction to impliment a single BADI definition?
Plz answer with proper explanation....
Thank you in advance
REgards,
Chaitanya

hi Krishna Chaitanya,
In a badi if the "Multiple Use" Checkbox is checked then You can have any number of Implementations for the BADI
Say I have defined a BADI "BADI1"
and I have 3 implementations
IMP1
IMP2
IMP3
The order of execution will be IMP1, IMP2 and IMP3
In a badi if the "Multiple Use" Checkbox is not checked then You can have ONLY ONE Implementation for the BADI
Say I have defined a BADI "BADI1"
and I have 3 implementations
IMP1
IMP2
IMP3
Only one Implementation can be active at a time and only that will get executed
Hope this helps a bit
Reward if Useful
Cheers
Kripa Rangachari.

How to change "No Password required" for Guest to "Yes"account under Somarsoft Dumpsec

Check Content:
Verify all accounts require passwords.
Run the DUMPSEC utility.
Select "Dump Users as Table" from the "Report" menu.
Select the following fields, and click "Add" for each entry:
UserName
SID
PswdRequired
AcctDisabled
Groups
If any accounts have "No" in the "PswdRequired" column, this is a finding.
Some built-in or application-generated accounts (e.g., Guest, IWAM_, IUSR, etc.) may not have this flag set, even though there are passwords present. It can be set by entering the following on a command line: "Net user <account_name> /passwordreq:yes".

Hi Malik,
How to change "No Password required" for Guest to "Yes"account under Somarsoft Dumpsec
Please contact SystemTools Technical support to get more efficient support regarding this matter:
http://www.systemtools.com/support.htm
http://www.systemtools.com/toolboard/
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Could not find network adapter needed for registration

Cisco IP Communicator has worked well for a month now. One morning I go to launch the app and I get the error message: Could not find network adapter needed for registration. I rebooted my pc and I got the same result. I reinstalled the app and got the same results. I don't know what if anything changed, but I know I can't even get the application to load to look at any settings. PLEASE HELP!!!
Brian C

Hi Brian,
Have a look at this good thread :)
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&topicID=.ee6c829&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cc0bb6f
Hope this helps!
Rob

Network adapter diver for t43

Hello guys!
i reformated my hard drive and lost a Network adapter diver for t43.
WHERE CAN I FIND Network adapter diver for t43 TIN ORDER CONNET TO AN INTERNET?
Please advise
Solved!
Go to Solution.

Hello,
You did not mention the Type (model) of ThinkPad T43 you have or which operating system you installed on it, but I believe most—if not all—ThinkPad T43s have a Broadcom BCM57xx NetXtreme series Gigabit Ethernet network interface card in them. If that is the case with your ThinkPad, than the latest drivers are located here on Broadcom's support web site. If none of those work, try looking at the device drivers on this page of Lenovo's support web site.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Is there a limit to how many pages i can have for one website using muse/business catalyst?

is there a limit to how many pages i can have for one website using muse/business catalyst?

Thank you. I've been searching everywhere and I couldn't find anything the mentioned it. I appreciate the feedback!

In how many days i can prepare for OCP 11g DB track ?

Dear all, i need help that in how many days can i prepare for my OCP DB track, i have already prepared for SQL paper rest now i have started to prepare for Administrator-I, and Administrator-II exam... and which book is best to follow
thanks in advance.
nav

How good is your memory? If you just want to pass the exam for the sake of passing it then you could cram all the information in there. I'd argue that even someone who wasn't a DBA would be able to learn to pass these exams if they studied hard to to remember all the answers - they are multiple choice after all.
Practice some [url http://en.wikipedia.org/wiki/Mnemonic]Mnemonics to remember certaing parts, I can't remember which ones...
But, seriously, as the others have said it depends where you are starting from in terms of knowledge/experience and how much time you can spare to learning it. There might be small or big gaps in your knowledge when you start looking through the books.
And remember that the best certification is good quality real world experience. The certifications help to show that you are willing to learn and develop your skills and that you can learn. I don't believe they show you can actually do the job.
Good luck!
Rob

How many physical standbys can be created in one data guard environment?

Hi Experts,
How many physical standbys can be created from primary in one data guard environment? Why LOG_ARCHIVE_CONFIG limits up to 9 unique database names? Thanks.

Victor Jin-Oracle wrote:
Hi Experts,
How many physical standbys can be created from primary in one data guard environment? Why LOG_ARCHIVE_CONFIG limits up to 9 unique database names? Thanks.
Post the source of your information abouit the limit of 9 names.
Even the Oracle doc shows 1..30 names in the same provided although that doesn't necessarily indicate a limit.
https://docs.oracle.com/database/121/REFRN/refrn10237.htm

How many physical Network Adapter required for to implement NVGRE Gateway ?

Similar Messages

Maybe you are looking for