How many pin connector/2nd hard drive recoomendations?

I have a dual 2 GHz PowerPC G5 Mac that I got maybe 2-3 years ago, probably closer to the latter.
I am getting into HiDef video editing and will be adding a 400 Gig SATA hard drive to the internal bay at the back of the top inside of the computer.
There appears to be 2 female ribbon connectors below the top hard drive on the outboard edge closest to the removable side aluminum door panel.
One female pin connectors is longer, the other shorter.
I am trying to figure out whether I need a 7 pin connector hard drive or a 21 pin.....I will be getting a Seagate hard drive.
Anyone have a definitive answer compared to a guess?
Also, what hard drive of this size would be a plug and play sorta thing without having to do all sorts of whizbang stuff.....I hear Western Digitial has some 10,000 rmp drives, but I need a high sustained transfer rate fast drive to handle realtime editing using Final Cut Express. Suggestions?
Thanks.

Ok, I got the same box as you.
I am getting into HiDef video editing and will be adding a 400 Gig SATA hard drive to the internal bay at the back of the top inside of the computer.
Ok HiDef really, really, REALLY, takes up drive space. Especially in uncompressed formats. If your doing this on any regular basis your going to have to seriously consider speed and data redundancy with something like Apple's X-RAID and a Fiberchannel PCI card with a RAID 5 setup and a lot of drives.
Obviously your going to have to learn all about RAID. Sure you could slap a 400GB drive in and go, but as that beast fills up it's going to crawl and your going to have problems as the speed drops considerably as the drive fills up.
You could roll your own external RAID O with a SATA PCI card and a SATA drive enclosure as a working disk for speed, but don't get a whole lot of storage. Backup the finished files to the 400GB internal SATA at night with auto-backup software. But I think of you do this regularly your going to eat up that 400GB in no time flat.
Depends how involved you get, how much money you got to spend.
There appears to be 2 female ribbon connectors below the top hard drive on the outboard edge closest to the removable side aluminum door panel.
One female pin connectors is longer, the other shorter.
One is a SATA connection the other is the power supply for the drive.
I am trying to figure out whether I need a 7 pin connector hard drive or a 21 pin.....I will be getting a Seagate hard drive.
All you need to know is SATA or Serial ATA. Plug it in and Mac OS X will take you right to Disk Utility to format it. Do a Erase w/Zero, format HFS+(journaled) The "Zeroing" will rewrite the drives bad sector map and make your writes considerably more reliable, it takes some time, but boy is it worth it! You can't do this later without completely erasing the drive. Video needs a good write source as they are very large files.
Also, what hard drive of this size would be a plug and play sorta thing without having to do all sorts of whizbang stuff.....I hear Western Digital has some 10,000 rmp drives, but I need a high sustained transfer rate fast drive to handle realtime editing using Final Cut Express. Suggestions?
SATA drives are plug n' play. Just what your G5 needs.
However if your doing a lot of video I suggest a Apple Fiberchannel PCI card and a X-RAID. Because you need large storage space, redundancy of data and speed for lots of HD video. This comes at the price of a lot of drives and a very fast interface.
The Raptors are fast, but they don't have a lot of storage space. The largest one at 10K RPM's has only 150GB of space and you need a Firmtek SATA PCI card to hook them up to G5's (excluding the Quad supposedly). So they make great boot drives and small storage drives.
Of course it's possible to get a 8 bay external SATA enclosure, a FirmTex 8 port SATA PCI card and eight 150GB Raptors and have a total of 1200 GB of drive space. Which you could roll 4 drives as a RAID O (striped) for 600GB as a working disk and the other 4 drives as combined into one for 600GB of backup storage.
Of course you can also use other larger drives with 16MB caches in the external enclosure but they run at 7,200 RPM's which would be fast enough if you striped them for a working disk.
Everything depends upon how much GB's of data you intend to be using daily, and if time = money then speed is a big factor, and if a lot of files then storage space and for backup. Plus how much you can spend.
If you need consulting services for a professional installation then your going to need someone to help you make the right decisions.
Apple's X-RAID is pretty easy and they will help you get set up, but it costs considerable amount of money. If you knew a bit more of what you can reasonable expect you would be doing with HD, also if you knew a bit more about the technology, you could do things yourself.
So you can either go through a couple year learning curve, hire somebody, or spend the money for a Apple X-RAID and have them walk you through the installation.
Here is some resources.
HDforIndies.com, Barefeats.com, Accelerate your Mac, MacGurus.com
There are also a lot of Pro Mac video sites which you can google for and start learning. You could also ask in the Apple pro video forums what would be a good hardware configuration for your particular needs.
http://www.amug.org/amug-web/html/amug/reviews/articles/firmtek/1eve4/
Also searching for a local Mac user group my yield someone who can get a set up working for you.
http://www.apple.com/usergroups/find/

Similar Messages

How to add a 2nd hard drive to HP Pavilion DV7!

How to add a 2nd hard drive to HP Pavilion DV7-3165DX, product # WA794UA or WA794UAR.
(1) Order HDD, hard drive, hardware kit. HDD hardware kit includes mounting rails, static shield, screws, rubber isolators, and SATA to motherboard cable. Check your model & Product # for compatibility.
HP Parts HDD hardware kit 517639-001 for DV7-3165DX product# WA794UA and WA794UAR.
(2) Consult Drives - Windows 7 PDF, table of contents, 7 Replacing a drive in the secondary hard drive bay. This will show you how to install a 2nd HDD in a HP DV7.
Drives - Windows 7 PDF
(3) In Windows 7 select Computer, Select the HDD installed, Format (if not already formatted).
(4) If HDD does not show up in Windows 7 under Computer, go to Start (Menu), Search Programs and Files, enter "Computer Management", select Storage, Disk Management (Local), look for the Bay 2 HDD (should show up as Disc 1, Bay 1 HDD should show as Disc 0), Format the 2nd HDD (The one you just installed).
Update: I have the 2nd HDD (WD 1TB) installed, Windows now recognises it after completing the steps I mentioned in step 4, Format with default allocation NTFS 931.51GB free, 118MB used for formatting. Format with default allocation exFAT 931.51GB free, 1MB used for formatting. I selected NTFS format to reduce file fragmenting.
This question was solved.
View Solution.

When i added my 2nd HDD I was ready to get it ordered and shipped, so it would arrive before I arrived home. I also was not sure if it would be offered anywhere else and be 100% compatible. The quality of the factory HP part is good. Since then I found a cheeper source. Newmodeus DV7-3xxx Hard Drive Caddy $27.95 +tax +shipping. Not sure if the quality is the same. If this helps you, post your results and kudos.

How to add a 2nd hard drive to DV7-3080US

The hard drive died on my dv7-3080us. It was a 500GB drive.
I would like to nreplace it with a 1TB drive and in addition
add a second drive. Specifically I would add a
SAMSUNG 840 EVO MZ-7TE250BW 2.5" 250GB SATA 6Gb/s
TLC Internal Solid State Drive (SSD).
Will the system support a 1TB drive and 250GB solid state drive?

Yes no problem. Use the SSD as the primary/OS/boot drive in slot 1. You will need a caddy for the 1 TB drive in Slot 2. Visit newmodeus.com to buy the caddy and for video tutorials.

How to install Solaris 10 with Win XP on 2nd Hard Drive

hi everyone,
I'm totally new to Solaris. As an enthusiast, I wants to install Solaris 10 on my Win XP PC's 2nd Hard Drive(40GB, empty) from Solaris 10 DVD.
I need help from how to format 2nd Hard Drive to how can I configure the PC so it asks me which OS to load every time.
I will highly appreciate everyone's help as I've just joined SDN. Many Thanx in advance, Jags

Happened upon this post while searching for an answer to something else and figured I would give my 2 cents on what you are trying to do so as to offer you some other ideas, as in stuff I have done personally in similar situations, just in case the other suggestions don't work out (and to avoid repartitioning your main hdd if it is your ONLY computer with an OS you have available).
Assuming you have a standard tower or mid-tower with at least 1 free 5 1/4" bay open, and if your motherboard doesn't support booting from a slave drive, and if you prefer a hardware solution so your OS installs are isolated from each other to be certain no corruption happens, like I personally do*. Then you may consider a pair of key lock internal hard drive racks (newegg search "hard drive rack ide" or sata). You would need at least 1 free 5 1/4" bay for the rack mount, then place the hard drives in their housings, each set as master, and you can stick in which ever OS drive you want, turn the key, then boot up (I recommend storing drives not in use in some large anti-static bags for protection). If you have 2 open slots, like I did on my tower, then you can connect both to the same cable and leave both in at all times. Just make sure ONLY 1 drive is keyed "on" at a time, or else you will get errors due to duplicate masters set. Also make sure you ONLY turn the keys when the system is OFF, the racks do NOT make the drives hot-swappable, it is only to offer an easier solution for using multiple hard drives on one PC so you don't have to open the case all the time and potentially damage the pins or the drives when switching them out.. Also you may need longer cables depending on the motherboard controller placement and the size of your tower, 80 wire 40pin if you are dealing with IDE (when you get longer I've noticed less 80 wire and more slower 40 wire cables). As always when dealing with the actual hardware, be extra careful, make sure power is off and PC is unplugged, touch the PC power supply if you don't have better solutions such as anti-static mat/wrist band, etc. You probably know all of this, but just making sure.
*I lost a lot of data one of the first times I tried an open source OS many years ago (some Linux distro, I forget which), I tried to repartition my windows 98 drive, it worked fine for about a week booting between the two, then most my personal windows files suddenly were random sizes and random folders ended up full of garbage files with garbage file names among other peculiar things.. If I partition a drive I generally only do it BEFORE I put data on it or install OS's.. or at least make CERTAIN that I have adequate methods for restoring my OS and personal files (such as imaging my OS install to a larger drive temporarily, etc)..
Anyway, was just offering some possible alternatives to repartitioning your main OS drive.. -TCP

How do I get my Firefox bookmarks off of my old hard drive (now installed on my new computer as the 2nd hard drive) and into my new installation of Firefox on my new computer?

I had a lovely computer, about 8 years old, running Windows XP; the mother board died; the hard drive was fine.
I now have a new computer, running Windows 7, and I have the old hard drive as my 2nd hard drive.
How do I get my old Firefox bookmarks off the old hard drive and into my new Firefox installation?

You can find your current profile using about:support pasted into the location bar then click on "Open Containing folder. That is where you will want to replace your old files into.
Next find your old profile on your old HD, see
:https://support.mozilla.com/questions/886839
With Firefox down replace the profile files you decide to replace.
You might get a better idea of what you are doing or might want from also looking at
* http://kb.mozillazine.org/Profile_folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox

How do i repair a hard drive?

I bought my ipod at best buy and paid with cash i put the receit in my wallet but i got stolen at the movie theatre the point is that i don't have a recit anymore and don't know how to replace my ipod now. it apears the apple icon with the back lights off then the icon with a ipod sad face apears telling me to go to apple.com/support.ipod and the back light turns on then everything goes off you can hear it that the driver it's working hard to start but it does not turn it on at all i went to the web site that they show i spent more then 2 days reading and doing what they say but nothing works at all. i just wants to know how do i get my ipod back to normal. i went to best buy they told me i have to came here again but since i already did all of this i could not do it again right.they said it needs a new hard drive what do i have to do to get a new one? how much do i have to pay?. i don't know how to get a new hard drive because i don't have the receip.
Ipod 80GB Windows XP

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

My plan to get win7 on 2nd hard drive

Hi all,
I recently bought a new 15" MPB with an apple installed 128gb SSD drive.
My plan was to install a 2nd hard drive in the DVD spot, a 500gb with a 70ish GB win7 partition. I would like to use Win 7 for screencasting for windows tutorials and for Gaming...mostly for gaming
I thought, naively, that this would be a simple boot agent setup...boy was I wrong.
I have already installed the 500gb drive in the optibay, it is working fine
I did not realize that a macbook pro cannot boot to an external drive or dvd. I could be wrong here but all my research seems to indicate that it can't...using something like refit does not fix this problem
I tried going through the boot camp setup with my external dvd drive attached through USB...did not work
also tried a USB thumb drive...no dice
I'd like to avoid having win7 on my 128gb ssd as there is limited space
my current plan is this...if it doesn't make sense or seems wrong please let me know
put the dvd drive back in
make a bootcamp partition on the sad...maybe 35gbs
install win7
if thats working ok put the hard drive back in
use win clone to clone the bootcamp win7 to the hard drive
hopefully that will work...
I'm just not sure how I'm going to partition the drive
I would like a 100gb ntfs partition for windows
and the rest partitioned mac
looks like win clone can expand the image to the larger partition
ipartition seems like it would work for this, but not sure
any ideas on how I can make a ntfs partition on the internal?
can I partition the drive with a windows machine? maybe do the 400gb as exfat?
thanks

Get http://www.virtualbox.org/
It lets you setup your own Windows virtualized disk image anywhere you like it. You'll still need to boot into Mac OS X, but it can run either seemlessly with Windows or full screen if you so desire.
As for booting externally, Mac OS X has no trouble booting on external drives on any MacBook Pro. As for Boot Camp, check with the Boot Camp forum.
https://discussions.apple.com/community/windows_software/boot_camp
Note, when using external hard drive for anything but backup, how many copies you have of information that is both on the internal and external drive.
There should be at least two separate external copies of all your data somewhere in event one fails.

How to partition 120 GB hard drive MacBook for OSX+Win (BC+Par.)? Fat/NFTS?

After many happy years with my PowerBook G4 12" (I will miss it definitely, as compact and cute as it is ;-() I'll now switch to a new MacBook 2.16 GHz with 2 GB RAM and a 120 GB hard drive.
I will have to use Windows (not yet sure if XP or Vista), as I need special software not available for the Mac, so my choice will be Parallels, so that I can work in Os X and at the same time use those Windows Apps I need.
However, I also want to be able to boot Windows-only with BootCamp, so I already learned I have to install Windows on its own partition.
So my question is:
How shall I partition the hard drive?
* If I have one big partition for OSX + documents and the rest (maybe 30 or 40 GB) for Windows, I won't be able to access my documents from Windows, right?
* So I would have to keep the data I want to access from within Windows on a PC formatted partition (if I don't want to pay for a software like MacDrive)?
Or can Windows running in Parallels read from a HFS partition?
* Does this mean: if I want to access (read and write) my documents in OSX and Windows, I have to keep them on a Fat32 partition?
-> This could be the partition where Windows is installed (but I'm not sure if I feel comfortable with that solution) of I would need a 3rd partition (Fat32) for data which would cause quite a big "segmentation" of the hard drive.
How did you resolve this problem?
Unfortunately, I don't see that I could really "separate" data I only have to access from Windows and those I only want to access in OS X, so in my opinion for me they all have to be in one place.
Looking forward to your comments,
Martin
MacBook 2.16 GHz, 2 GB RAM, 120 GB HD (white) Mac OS X (10.4.9)

You should probably ask all your Boot Camp quesitons in the Boot Camp discussions:
http://discussions.apple.com/forum.jspa?forumID=1165
And your Parallels questions in the Parallels forums:
http://forums.parallels.com

Help. Can I go to a 1TB 2nd hard drive in my HP Pavilion dv8000 (also listed as a dv8333cl ?)

hello-
I have an HP dv8000 notebook computer running windows xp-sp2. I upgraded my 2nd hard drive (not the windows xp/boot drive - just document/family photo & video storage) to a Hitachi 320 GB drive 4 years ago. it works great but I"m almost out of space.
item/specs - 320GB 5400 RPM 8MB Cache 2.5" SATA 3.0Gb/s
http://www.newegg.com/Product/Product.aspx?Item=N82E16822145227
I would like to change it out for a newer Hitachi 1TB drive - as I am now approaching a full drive for photos,videos,docs.
such as this one - 1TB 5400 RPM 8MB Cache 2.5" SATA 6.0Gb/s
http://www.newegg.com/Product/Product.aspx?Item=N82E16822145584
It is listed as having a speed of 6.0 gb/s instead of 3.0 gb/s and It says it's 'Advanced Format'. Any reason my windows xp-sp2 laptop won't be able to use this drive?
In searching around the web it seems that my version of windows xp with sp2 as well as my bios may be the controlling factors. In entering my product number on the HP Software and Drivers page it indicates my bios is up to date (only available update is for an AMD processor). I may update to SP3 - though further research indicates XP with SP2 has no trouble 'seeing' a 1TB drive.
This compatibility doc from Hitachi that mentions these drives are compatible with some HP DV computers - but not mine specifically (dv8000 or dv8333cl) - and it also lists my motherboard/chipset as being compatible - Intel 945PM Express (I'm not sure about the express part but I'm pretty sure I have the Intel 945PM).
http://www.hgst.com/tech/techlib.nsf/techdocs/5E27D1BA34214ECB8825797B00282A2F/$file/TS5K1000_Compat...
If not the Hitachi - due to the Advanced Format issue - how about a seagate or western digital 1TB drive such as:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822178006
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136927
I'm running windows xp with SP2 - it's very stable, my dv8000/8333cl is a centrino dual core intel 1.83ghz, i've upgraded to 2GB of Ram installed, Also I just recovered from a 'black screen' by 'reflowing' (tearing down computer and heating up the Invidia GPU to 350 degrees for a bit to 'reflow' the solder connections to my motherboard) my nvidia Geforce GO 7600 GPU chip and cleaned/re-engineered the heat sink with custom copper heat shims - so my HP laptop is running great and I want to keep it going for a long time.
What are the downsides to popping in a 1TB secondary drive to see if it will be 'seen' and if I can partition and format it for use as my storage drive? Any thoughts? Thanks much!

Seems like my 32 bit windows xp will recognize and use up to 3-3.5GB of the 4GB of RAM. And since memory is pretty cheap now I'm going to try this also.
Anyone have any success going beyond the stated 2GB max for memory?
My Intel 945 PM motherboard/chipset lists max memory as 4GB - so it will only be limited by the 32 bit windows xp?
Thanks for any thoughts.

How do you know a hard drive is bad?

how do you know a hard drive is bad?

From the OS X "Help" system:
Check whether a disk is about to fail
You can check the health of many disks in Disk Utility. Many disks include Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T) hardware, which lets a disk test itself for potential problems.
Open Disk Utility.
Select the disk in the list at the left.
If you see a message saying the disk has a fatal hardware error, the disk has an irreparable hardware problem that can’t be fixed by Disk Utility or any other utility that repairs software problems. Back up as much of the data on the disk as possible, and then replace the disk.
If you don’t see a message saying the disk has a hardware error but you still have problems with the disk, you can try to repair it with Disk Utility.

Added 2nd Hard Drive - Which Format Do I Select?

I just added a 2nd hard drive. It shows up in disk utility. I know I must format it before I can use it. But, there are 6 choices in the Volume format drop down: Mac OS Extended (Journaled), Mac OS Extended , Mac OS Extended case - sensitive journaled, Mac OS Extended case - sensitive, MS-DOS file system, UNIX File System. Is there some information on the Apple site that explains these 6 formats?
G5 2.3 dual Mac OS X (10.4.6) Which is best to use?
G5 2.3 dual Mac OS X (10.4.6)
G5 2.3 dual Mac OS X (10.4.6)

Actually, when I have had a drive with problems like bad blocks, I find Intech Speedtool ZoneBench to show up problems the best. It also includes ability with another part of the suite to map out bad blocks (never found any) but I did have to do a 7-way erase with one drive that kept having problems.
An entire 4GB area went from normal 56MB/sec down to 31-33MB/sec - either partition off that area, or just realize it has this problem with longer seeks (the time to go from inline to spare sector - some SCSI drives locate spares on the same track to reduce seeks.
ZoneBench can be set to a 511MB test file, and can test 60? areas per volume, so you can force read/write to over 33%.
The most important areas of a drive that cannot have any bad blocks are the areas that are not part of user allocated space, partition tables, directory (maybe) and the area of the journal file.
If it solved a problem 1% of the time or less, would vendors include it in their "how to setup a drive for end users"?

2nd hard drive in Satellite Pro P200

Hi everyone
I have a Satellite Pro P200.
Does anyone know where I can get a lead and a caddy to install a 2nd hard drive?

As far as I know your notebook can be upgraded with second HDD if SATA connector is available.
When you remove HDD cover for second HDD can you see it or not?
I have Satellite P200D with place for second HDD but there is no HDD SATA connector so upgrade is not possible.

Looking for a 2nd hard drive on DV9700

I want to add a 2nd hard drive to my HP dv9728ca. Are there any specs I should look for? Right now I have a 160GB hd, and the manual ( http://h10032.www1.hp.com/ctg/Manual/c01295898.pdf ) seems to indicate my only choices are 120GB or 160GB. According to the service manual, if I want a 200GB or 250GB, I can't use my 160GB anymore. The possible options are as follows : 250x2 (5400), 200x2 (4200), 160x2 (5400), 160+120 (5400), 120x2 (5400 or 7200, but both the same). Now I've upgraded computers before, even built some from scratch, and I've never seen this type of requirement. Is this for real? I've read a post from someone saying he had trouble with his new drive which was bigger than his original one. What about the 1.5GB/sec vs 3.0GB/sec? My understanding is that the 3.0 is downward compatible, but some seem to pretend you have to set a jumper on the drive to bring it down to 1.5. Any help would be appreciated. And what if I add a 7200rpm drive instead of 5400rpm? I don't see how these should cause any trouble, but from looking around it seems HP motherboards are very specific as to what they'll let you do. I already purchased the caddy kit, all I need is the hard drive, but I don't want to end up with one that's not compatible.
If anyone's added an additional hard drive to a dv9700 series laptop, please let me know what model you chose (brand, capacity vs what you had, 5400/7200, 8MB/16MB).

Hi, I have dv9730ca laptop myself and I have 2 160GB seagate 5400rpm 8MB hdd's, they have an external data transfer rate of 300MB/sec and an internal data transfer rate of 1.1GB/sec. They do get up to around 55oC (i use cpuid - hwmonitor to check this out) and I have heard using the 7200rpm hdd's can increase the heat output so I would recommend using the 5400rpm hdd's instead. The best way I have found to get over the heat issue from any laptop is to use a targus chillmat, it has 2 fans and runs off a usb port. I hope this info helps you out
HP Pavilion DV9730CA - AMD Turion 64 X2 TL-64 2200MHz, 2GB (2x1024MB) SODIMM RAM, 320GB (2x160GB) Seagate 5400rpm HDD's, nVidia GeForce 8400 GS Graphics, Broadcom ABG Draft N Wireless, HD DVD SuperMulti DL DVD+RW, 4 USB 2.0, S Video, VGA, HDMI, Firewire, 5 in 1 card reader, RJ-45, RJ-11, Expansion Port 3, Expresscard 34/52.

WinXP dual boot Solaris on 2nd hard drive problem...

Hi there ppl,
run into a bit of a prob with dual booting winxp and solaris. I have WinXP on 1st hard drive and Solaris on 2nd hard drive 2 (Solaris - partition 1 with slice 0 x86 active, DOS - partition 2 for installing linux later, DOS - partition 3 for fat32 file storage later).
I want to boot to Solaris on drive 2 from the WinXP boot loader on drive 1. Could somebody please tell me exactly how to do this as I've copied the bootsect.sun file from Solaris via floppy to the WinXP C:\ drive, and edited the WinXP boot loader to:
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
multi(0)disk(0)rdisk(1)partition(1)C:\bootsect.sun="Solaris/x86"
and when I select to boot to Solaris I get:
Windows could not start because the following is missing or corrupt:
<Windows root>\system32\hal.dll
Please reinstall a copy of the above file
WinXP still boots ok.
Any help would be much appreciated, thanks already.

I am having a same issue....
1.....1st 80 GB hard disk, I had window XP installed. (NTFS format)
2....add 200 GB, 2nd hard drive, make 3 partitions, on first 50GB partition I have install Solaris 10.....Having some issue with network config, but its resolve, thank this forum.....
Now, everytime when ever I need to go to Solarid, I have to go in BIOS screen and switch HD, I mean if I want to boot to solaris, I have to make a 2nd (200GB) hd primary..Soaris work fine, but from the GRUB menu, if I select window, its get hung up...
now if I want to boot to window, again I have to go to BIOS and need to switch around hdd.... make 1st (80GB) hdd primary, windows work fine....
Questions are, I do not want to go bacK & forth in BIOS.....
1....Can some one help me, provide me the step-by-step information that how can i set up dual boot, so I can use my 2nd drive (200GB) as a primary and from the GRUB, I select windows and its boot to windows... if its otherway around,,,its still ok....I don't want my kids mess up BIOS....
2...What is a chainloader+1...can some one explain?...what is +1 mean.
3....How to install GRUB in MBR?
Lion-O any ideas, how to boot windows bootloader from 2nd HD? Please step-by-step Instuctions....

DV7-6c90us 2nd hard drive issues and AMD Radeon Issues

The Problem:
1)My AMD card has always been flakey and I've tried multiple times to uninstall it permanently and can't, it won't let me. I want to remove it completely since I'd rather have access to the extra hard drive than the graphics card.
2) when the card is working then my 2nd HDD won't work, but when the AMD card isn't working then my 2nd HDD works
What I'm Working with:
HP DV7-6c90us
Intel Core i7 2670qm chip
16GB of RAM (I added them, Kensington 1666MHz system underclocked to 1333MHz since that's what the i7 maxes out at)
Then whatever obscure AMD Radeon graphics card came with my system.
Windows 8 Pro
2nd HDD is a 1TB Segate Momentum drive, I pretty much took it from a Travel Drive and put it in my latop
Using the standard power brick that came with my laptop (120W) and battery is almost always at 50% or better)
The laptop is just over a year old (got it 06/08/2012 from HH Gregg)
What I've done:
Checked to make sure the 2nd HDD is installed correctly, it is and is plugged in to port two. It shows up in BIOS, but when you try to test it BIOS hangs. It's not corrupt since when it does decide to work, it works without any issues. It even works when I plug in my USB 3.0 adapter and use it as an external drive. That's not really an option since I am constantly transfering and managing that hard drive so it would be too much of an inconvenience.
I tried uninstalling AMD Radeon completely, but can't. I used a site that showed me what to delete from registry, Program File (x86), User App Data (Local and Roaming), and tried to uninstall it through "Programs and Features" under Control Panel (the Catalyst software). At every reboot it comes back like a virus. I don't need it, nor do I want it since the performance is so spotty and has always been, I do need the 2nd hard drive working again since i use it much more than I do AMD.

Huffer wrote:
You will not like the answer but RAID is not possible on that machine. HP does have RAID function on some of the business models but the Pavilion is a consumer model and they have never had a RAID option on consumer models that I know about. Even if you could set up a RAID-0 array it would wipe out the data on the first drive and you would have to reinstall Windows from scratch and when you do a RAID-0 even on machines that permit it the two drives generally need to be identical, not just similar or the same size.
how is it then that some hp models ship with 2 HDD's but show up as one then eg there is a pavilion that is almost identical to mine sorry i don't know the model # but even more recent there are envy models that have this. or do they actually show as separate drives?

How many pin connector/2nd hard drive recoomendations?

Similar Messages

Maybe you are looking for