How Many Points Do I Need Before I Can Report Abuse?

I noticed a thread was removed yesterday because it mentioned a bad JB had caused issues and we all know that hacking Apple iPhones and iPads can't be discussed here, however I was about to explain to this person that they should restore their phone to original factory condition using iTunes and forget about the JB when it was yanked.
When I posted a complaint my thread got yanked presumably simply because it mentioned the dreaded JB word.
I wouldn't mind so much but doing a forums search using that word produces at least 2 pages of threads that have been left intact, many of them in Enterprise and stretching back over quite a long period of time, so I feel that someone is acting in rather an arbitrary manner and not reading the posts before yanking them.
I shall await the yanking of this thread but I tell you, as a veteran poster in many security-related forums, I do know the meaning of the expression acceptable behaviour.

Meg St._Clair wrote:
I think it's more a question of way too little time. This is a VERY busy forum. The Hosts can't possibly read every post as well as deal with all the maintenance, answer questions. I don't know if you saw my answer to you in your other thread. Several Hosts have said that moderation is more of an art than a science. They try to balance a the TOU against a lively exchange of ideas (and sometimes, it gets very lively!). They are also human. Sometimes one host will have a different take on a post than another. Sometimes, deaicions are changed and threads get reinstated.
Whether threads are left open also depends on timing. I don't spend much time in the Mac forums these days nut I'd bet that the Hosts are being a bit more lenient about somethings because of the recent release of Lion. They tend to allow posts that are a bit closer to rants when there has been a big release because, well, some people are freaking out.
It's never going to be completely consistent. However, every Host I've ever interacted with has seemed to be trying very hard to make this a useful, and yes, even fun place.
If you have a concern, post it here and it will get sorted out.
Best of luck.
I moderate McAfee and Neosmart forums, so I know what you mean.
Thanks.

Similar Messages

  • Report execute time nd how many records will be returned before hitting the "run" option?

    Post Author: Prasad15
    CA Forum: WebIntelligence Reporting
    Is there any way to know how long the report executes and how many records will be returned before hitting the "run" option?
    Regards
    Prasad

    To know if the report is going to return more than 10,000 records, you first have to run the query with a 'select count(1) from ... where ...' (with the same from and where clauses as you normal query). Since this takes about the same time as runnng your report, I wonder if you really gain anything (although formatting may take some time too).
    You may simplify the select count(1) query by omitting all the lookup tables that are only needed for formatting. That way your query may run a lot faster. You can put this in your after parameter form trigger.

  • How many NWDI do I need?

    Hi!
    Our company is an SAP outsourcing unit. We have about 16 landscapes with
    all kinds of SAP products.
    We are going to use NWDI to handle JAVA transport.
    Could you inform us how many NWDI do we need?
    Thanks a lot!

    Hi Jennifer,
    This might help, read
    http://help.sap.com/saphelp_erp2005/helpdata/en/42/f1a03611d83ee4e10000000a1553f7/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/54/347a2a840246b1bbd8fc9154be6658/frameset.htm
    Regards
    Juan
    Please reward with points if helpful

  • How many devices do you test before releasing your iphone app

    Hi,
    Just want to get an idea about how many devices do you test before releasing your iphone app. I am currently developing on iphone 2.5G. Do I need to test my app on iphone 3G and ipod touch? Are there any difference? My app does not depends on network speed.
    thanks,
    ff

    It's not a bad idea to test on whatever you can but it's not necessarily required. You do have to make sure you're not doing anything that can't be done on all devices. (i.e. access camera in Touch, assume GPS, etc)

  • How many NWDI do we need?

    Hi!
    We are an SAP outsoucing company with many different
    landscapes for MI, EP, ECC, XI, SM, etc.
    We have decided to use NWDI to handle all JAVA change management.
    Some SAP systems can be in the DMZ.
    So how many NWDI do we need? Is one enough?
    I'll give points. Thanks!

    Hi Laura,
    this doc shows typical NWDI scenarios/landscapes with XI
    read just the first section and you will know
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • How many problems do you need to have with a mac book pro to get it replaced i have had 6 problems and they say they have fixed everything and somthing new happends

    how many problems do you need to have with a mac book pro to get it replaced i have had 6 problems and they say they have fixed everything and somthing new happends
    I have had thehad the:
    ram replaced
    Battery
    Audio
    Trackpad
    os operating system
    fans
    And they still won't replace the laptop for me worst buy ever but i have had a imac for 2 months and nothing at all wrong .

    You could try calling Apple and ask for Customer Relations.
    From Readers Digest-February, 2005
    How to Complain
          You call customer service to complain about a product, and you hang up angrier than when you started. That’s customer rage, a feeling experienced by millions of people with a major complaint, says Scott Broetzmann, president an American firm that tells companies how to offer the best customer service. His secrets to getting good service:
    Have a goal
    If you want your product repaired, say so. Want an apology? Speak up.
    Keep it short
    Focus on one problem, and be succinct.
    Stick with it
    You have to invest the time it takes. Don’t get what you want? Ask for a supervisor.
    Skip ultimatums
    Don’t threaten not to do business with them again. Why should they help you if you won’t buy from them in the future?
    Plead your case
    Many companies have information such as how much money you’ve spent with them and how often you complain. If you’re a good customer, they may be more willing to help.
    Be nice
    You’re unlikely to get what you want if you’re rude.
    Good luck.

  • ISCSI MPIO, how many path do I need to create

    Hi,
    I've a server with 4 NIC connection to a DELL MD32xx which have 8 NIC.
    My question is how many path do I need to create under iSCSI connection.
    Do I need to create a path from each Server NIC to each MD32xx NIC, which will make 32 connection (and doesn't make sense).
    If not, how should I proceed, I've looked at many example and none seem to cover that kind of situation, they just directly connect the server NIC to the MD32xx NIC instead of going through switch for redundancy.
    Thank
    ML

    Hi,
    I've a server with 4 NIC connection to a DELL MD32xx which have 8 NIC.
    My question is how many path do I need to create under iSCSI connection.
    Do I need to create a path from each Server NIC to each MD32xx NIC, which will make 32 connection (and doesn't make sense).
    If not, how should I proceed, I've looked at many example and none seem to cover that kind of situation, they just directly connect the server NIC to the MD32xx NIC instead of going through switch for redundancy.
    Thank
    ML
    Please follow the guides and discussions here:
    Windows MPIO Setup for Dual Controller SAN
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/3fa0942e-7d07-4396-8f2e-31276e3d6564/windows-mpio-setup-for-dual-controller-san?forum=winserverfiles
    It's MD3260 so can be used for 32xx storage unit with iSCSI uplinks.
    StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

  • HT1222 How many GB do I need to download video

    How many GB do I need to download video

    It depends on the size of the movie, the capacity of your iPad and how much space you have left, so you need enough to hold whatever the size of the video is and still leave about 10% of your total storage space available.
    Most Movies are at least 2GB. I have seen some that are over 6GB.

  • How many GB do I need to download a rental movie from ITunes?

    How many GB do I need available to download a movie?

    The description in the iTunes Store gives the size of the movie. If you are acquiring it from elsewhere, the information should be available.

  • HT4623 How many gigabytes do I need spare on my iphone4 to upgrade to ios7 ?

    How many gigabytes do I need free on my iphone4 to upgrade to ios7 ?

    Then update using iTunes on your computer. You'll be fine & you don't have to delete anything. You only need that much free space if you update OTA. Once the update is done, you get the space back. So, use your computer.

  • How many cals do i need?

    Let say i have 300 active directory accounts but only 100 physical users (with heartbeats), how many CALs do i need per user CAl licensing? Also, if i have 300 emails  accounts in exchange 2010 but only 100 physical users, how many exchange CALS do
    i need? And if 5 users leave the company, does the CALS be free up for the next employees?
    Based on my research, i need 100 AD CALS and 100 exchange CALs but i getting conflicting information. Can someone who knows licensing really well confirmed this?
    Thank you.

    Hi My3cents,
    Sorry for the delay reply.
    For licensing related issue, you’d better contact Microsoft licensing team. In the United States and Canada, you may call the licensing team directly
    at 1-800-426-9400 (select option 4), Monday through Friday, 6:00 A.M. to 5:30 P.M. (PST) to speak directly to a Microsoft licensing specialist. In this way, you will know the detailed information about license.
    Worldwide customers can use the Guide to Worldwide Microsoft Licensing Sites http://www.microsoft.com/licensing/worldwide.aspx to find contact information
    in their locations.
    Thank you for your understanding!
    Best Regards,
    Anna

  • How many WHEREs do we need in minimun when we have 4 FROMs in the statement

    How many WHEREs do we need in minimun when we have 4 FROMs <tables> in the statement?

    Technically none - but it produces cartesian join:
    SQL> SELECT * FROM scott.emp, scott.dept, scott.salgrade;
         EMPNO ENAME      JOB               MGR HIREDATE        SAL       COMM
        DEPTNO     DEPTNO DNAME          LOC                GRADE      LOSAL
         HISAL
          7788 SCOTT      ANALYST          7566 87/04/19       3000
            20         40 OPERATIONS     BOSTON                 3       1401
          2000
          7839 KING       PRESIDENT             81/11/17       5000
            10         40 OPERATIONS     BOSTON                 3       1401
          2000
         EMPNO ENAME      JOB               MGR HIREDATE        SAL       COMM
        DEPTNO     DEPTNO DNAME          LOC                GRADE      LOSAL
         HISAL
    280 wierszy zosta│o wybranych.

  • How many servers are generally needed to a medium size HFM project

    Hi,
    I am new to HFM.Can any one help me that How many servers are generally needed to a medium size HFM project? And details that servers are for what segments?
    Thanks in advance.

    Hi,
    You can use one serwer only for everything (provided that you use classic application).
    Number of servers depends on the number of planned applications, the number of users, number of entities, number of accounts, the amount of calculation...
    Best,
    Marcin Kuzdra

  • How do i see how many points i have in this forum system?

    How do i see how many points i have in this forum?
    I will give points to best answer

    hi Debbie!
    Go to your public profile link, next to your status level you will see your total points.
    hmmmm. one quirk. if people don't actually have a status level yet, i don't see a points tally if i look at their public profiles. (not sure how it looks to a poster without a status level if they look at their own public profile.)
    if you've got a relatively small number of posts (and don't have a status level yet), it's possibly to do a manual count by checking through your My Posts (by opening each post in there and checking for any yellows or greenies.)
    love, b

  • How many points/fin​gers on the Thinkpad T410S touchscree​n ?

    Hello
    I know that Thinkpad T410s can have a touchscreen. I'd like to know:
    1) Can you confirm me that it is a N-Trig Touchscreen?
    2) Can you tell me if it is a multitouch or multipoint touchscreen, and how many points/fingers are supported? I'd like to have a 4 fingers technology; i've read from Lenovo web site that is is a new technology. So if I by a T410s in january or february 2011, will I have that 4 fingers technology on my touchscreen? .
    Thank you very much
    Victor
    Solved!
    Go to Solution.

    Hi and welcome to the forum Victor!
    While there are lenovo employees sharing their expertise on the forum, this is not official channel to contact support, the best way to reach them is through phone.
    Hope this helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

Maybe you are looking for

  • Simple Button.Text not changing properly

    Hi all, The WPF learning curve is steep. I have pulled my hair over this simple Button.Text change and I can't get it to work. In WinForms this works: Public Class Form1 Private Sub BTN_1_Click(sender As Object, e As EventArgs) Handles BTN_1.Click BT

  • Macplay Realmyst on Snow Leopard 10.6.8 at 64bit

    Is it possible to run the Macgames Realmyst disc on Snow Leopard10.6.8 at 64bit?  Having switched to mac-pro from PC a few years back, blood pressure and heart rate have subsided nicely and life is good.  The only thing missed from PC are the Cyan ga

  • PPro6 to Encore "internal software" error

    I encoded in PPro6 and then imported an mpeg2 project as a timeline from PPro6 into Encore.  When I try to burn a DVD, I get an error message: PGC "" has an error at 00;00;00;00.  Internal software error: 50, line "" Info: name = "", ref= Bpgc, time

  • Install on Firewire HDD?

    Ok, Apple's support documents have not helped me with this question. Can you install Boot Camp/Windows onto a bootable firewire HDD? Apple says yes in one place and no in another, so which is it? Thanks

  • Not supported on this architecture

    Hi I want to double-check if Power Mac G5 (Processor Name: PowerPC 970 (2.2) can operate the Adobe InDesign CS5.5 product. If it is not, would it mean that the only way is to buy a new computer with Multicore Intel processor (for Mac OS) or Intel® Pe