How many portal roles are needed for multi-country ESS?

we are implementing ESS for multiple countries.
has anybody tried to use one portal role for all countries?
the new ESS business package comes with one ESS portal role that has content for all countries. I was wondering if we can use this role as-is (after making a copy of course) to present content for all countries, instead of creating one portal role for each country.
Regards,
Tiberiu

in Employee Self-Service > General Settings > Homepage for Self-Services > Resources> Define Resources
did you have to enter the PCD path to the country-specific iView?
In that path you associate any resource to a Portal Page. Just change the PCD Path for custom Pages only.
Only the services are "country-specific" (because they have assigned a MOLGA). Follow the path from my previous answer to add any country-specific app.
the standard installation does not have the PCD path populated, it has the name WebDynpro application component instead
This is common issue. Depending on how the installation/upgrade was performed, the resources table is populated or not. But if is not populated, the "URLof PCD Page" property is taken from client 000. In my last implementation, i expected this issue, but i not populate manually this property and everything works fine.
Kind regards

Similar Messages

  • How many ssl modules are needed for a redundant configuration?

    Hi, apologies but I can't seem to find a definite answer for this question. I have two css 11506's set up using vip/virtual interface redundancy (active/standby). Each css 11506 has a single ssl module.
    Is this adequate for ssl redundancy? I've read in this forum that if an ssl module fails, the css will reboot causing failover to the standby css so ssl connections will simply reset and as long as I have ASR set up on the back end http content, users will not notice the failover.
    Am I correct in this thinking or do you recommend using two ssl modules in each css? Thinking there is that if one ssl module fails, there will still be a 2nd module to handle ssl traffic and the css's will not failover.
    Thanks
    -Dan

    there is no need for 2 modules.
    You would use 2 modules if you need more power [handle more connections].
    However, your assumption is incorrect.
    Nowadays, there is no device in the worl [cisco and non-cisco] that can do SSL ststeful failover.
    In other words, upon failure, all SSL users will have to restart their connection.
    Gilles.

  • How many hard drives are needed for optimizing Premiere Pro performance?

    My work just setup a Mac Pro with a 250 gig ssd and Premiere Pro CC, After Effects CC. I can only hookup external drives with the Mac Pro. What is the minimum number of drives needed for video, audio previews etc...

    Note the real-world sustained transfer rates on externals ... eSATA definitely a HUGE preference over USB3.
    Hmmm ... surely they can spring for a second internal? One of the other options that would be spendier but fast for having all your material on "one" drive is a RAID of SSD drives, but needs to be large ones. Even just a second internal HDD and an external eSATA would be a big uptick over a single drive.

  • I have a presentation to make to a customer and need to know how many educational apps are there for the iPad/iPod?

    I have a presentation to make to a customer and need to know how many educational apps are there for the iPad/iPod? More specifically special education apps.
    Thanks

    Keep in mind as well that not all apps are "created equal".  Some are really good, and others are not very good.  You might also want to look at some education sites for recommendations.  An example of a general iPads in education forum is
    http://ipadeducators.ning.com/
    but I imagine some exist for special education needs as well.  Our healthcare organization is using some apps for working with autistic children and find them very helpful. 

  • No portal roles are assigned for this user.If this problem persists, contac

    I am trying to access portal first time using j2ee_admin user. It is saying "No portal roles are assigned for this user.If this problem persists, contact your system administrator."
    iam using abap+java enginee how config in abap enginne ,iwant which role to assign  j2ee_admin  user
    i already asiigned sap_j2ee_admin,SAP_BC_JSF_COMMUNICATION,SAP_BC_JSF_COMMUNICATION_RO   but it show same problem
    please help me..
    Edited by: Mugala Balu on Aug 7, 2010 5:53 PM
    Edited by: Mugala Balu on Aug 8, 2010 7:48 AM

    Balu,
    Well this issue has been discussed many a times in forums. You would have to point your data source to ABAP system.
    Check this thread in [here|J2EE Failed to start  , after changing UME datasource;.
    Good Luck!
    Sandeep Tudumu

  • Customizing Message "No portal roles are assigned for this user"?

    Hello,
    we would like to give the user some hint on who to speek with in case he has no portal roles assigned.
    So we would like to customize the messaage "No portal roles are assigned for this user" to some customer spezific text or to redirekt to a customer specific iView.
    I would appreciate any kind of hints.
    Best regards,
    Lutz Rottmann

    Hi,
    Check these threads.
    Customizing message "No portal roles are assigned for this user"
    No portal roles are assigned for this user
    Regards,
    Harini S

  • Cusomize message "No portal roles are assigned for this user"?

    Hello,
    we would like to give the user some hint on who to speek with in case he has no portal roles assigned.
    So we would like to customize the messaage "No portal roles are assigned for this user" to some customer specific text or to redirect to a customer specific iView.
    I would appreciate any kind of hints.
    Best regards,
    Lutz Rottmann

    Hi,
    Check this thread.
    Customizing message "No portal roles are assigned for this user"
    No portal roles are assigned for this user
    Regards,
    Harini S

  • How many concurrent users are allowed for an Azure Virtual Machine?

    How many concurrent users are allowed for an Azure Virtual Machine?
    Please share the details with the Azure VM size. Currently I have Standard VM of size D13(4 cores, 28GB RAM)

    Hi SanPSK,
    Thanks for posting here.
    I suggest you to check this article for Azure VM size
    https://msdn.microsoft.com/en-us/library/azure/dn197896.aspx
    For the concurrent users on VM - A maximum of 2 concurrent connections are supported, unless the server is configured as a Remote Desktop Services session host.
    Girish Prajwal

  • How many SECONDARY INDEXES are created for CLUSTER TABLES?

    how many SECONDARY INDEXES are created for CLUSTER TABLES?
    please explain.

    There seems to be some kind of misunderstanding here. You cannot create a secondary index on a cluster table. A cluster table does not exist as a separate physical table in the database; it is part of a "physical cluster". In the case of BSEG for instance, the physical cluster is RFBLG. The only fields of the cluster table that also exist as fields of the physical cluster are the leading fields of the primary key. Taking again BSEG as the example, the primary key includes the fields MANDT, BUKRS, BELNR, GJAHR, BUZEI. If you look at the structure of the RFBLG table, you will see that it has primary key fields MANDT, BUKRS, BELNR, GJAHR, PAGENO. The first four fields are those that all cluster tables inside BSEG have in common. The fifth field, PAGENO, is a "technical" field giving the sequence number of the current record in the series of cluster records sharing the same primary key.
    All the "functional" fields of the cluster table (for BSEG this is field BUZEI and everything beyond that) exist only inside a raw binary object. The database does not know about these fields, it only sees the raw object (the field VARDATA of the physical cluster). Since the field does not exist in the database, it is impossible to create a secondary index on it. If you try to create a secondary index on a cluster table in transaction SE11, you will therefore rightly get the error "Index maintenance only possible for transparent tables".
    Theoretically you could get around this by converting the cluster table to a transparent table. You can do this in the SAP dictionary. However, in practice this is almost never a good solution. The table becomes much larger (clusters are compressed) and you lose the advantage that related records are stored close to each other (the main reason for having cluster tables in the first place). Apart from the performance and disk space hit, converting a big cluster table like BSEG to transparent would take extremely long.
    In cases where "indexing" of fields of a cluster table is worthwhile, SAP has constructed "indexing tables" around the cluster. For example, around BSEG there are transparent tables like BSIS, BSAS, etc. Other clusters normally do not have this, but that simply means there is no reason for having it. I have worked with the SAP dictionary for over 12 years and I have never met a single case where it was necessary to convert a cluster to transparent.
    If you try to select on specific values of a non-transparent field in a cluster without also specifying selections for the primary key, then the database will have to do a serial read of the whole physical cluster (and the ABAP DB interface will have to decompress every single record to extract the fields). The performance of that is monstrous -- maybe that was the reason of your question. However, the solution then is (in the case of BSEG) to query via one of the index tables (where you are free to create secondary indexes since those tables are transparent).

  • How many channels should i need for my 10 pieces of thermocouple?

    1.i need test 10 pieces of thermocouples at one time,so how many channels do i need? are 8 channels enough(SCXI-1112) of i must use 32 channel(SCXI-1102)?
    2.I only need test 3 LVDT signals and 3 strain guage signal(must full bridge),do you have 4 channels' LVDT module and 4 channels' Strain/bridge module(full bridge)?
    3.if i hug all these sensors to the signal conditioning,does that mean my DAQ should have at least 16 Analog inputs,beside do you have 12-bit DAQ?

    dittoit,
    1. If you need to measure 10 thermocouples, then you will need at least that many differential channels. So the 1102 would be best.
    2. The current LVDT module we offer is the 1540 which has 8 Channels as does the 1520 which is the best strain gauge module.
    3. The measurements from the SCXI Chassis will normally be multiplexed to one channel on the DAQ card. Any of our E-Series (except the Basic DAQ) will control. Our E-Series card can be either 12-bit or 16-bit.

  • How many sessions would I need for BBP?

    Hi friends,
    I am going to work on preparing a BBP document for Benefits implementation. Could you please guide me on how many sessions of workshops would I be needing for different components of Benefits module? I need to prepare presentations for each session. So, it would be great if you could also help me in dividing the module components into different sessions.
    I have to perform these activities for PA and OM modules as well.
    Your guidance would be a great help for me.
    Thanks in Advance,
    Sanjay.
    P.S. - Appropriate points will be awarded.

    Hi,
    Preparation of blue print comes after you gather all the requirements, discuss the gaps with the clients. Gathering the requirements and mapping them to SAP will be done in series of workshops. You may have two workshops for each module and two workshops to discuss integration requirements. Once you are clear on the requirements and the Gaps, plan for a workshop on initial draft blue print discussion. This discussion would be for the design and content of the BBP. Later one workshop to present the complete blueprint to the client whci would include all the main stakeholders of all the modules. Later small changes can be made with individual discussions and go for sign off.
    If you are particular abut the number of sessions, it depends on the complexity of business requirements. If the requirements are many and complex in nature, you need more sesions to understand the scenarios completely. Once you are clear with the AS IS and TO BE, preparation of BBP will become an easier task.
    Regards,
    Suhasini

  • How to know how many child tables are present for a parent table

    hi all,
    i created a table USERS in db user pavan (pavan.users (id primary key) ).
    and child tables are may be in the same user pavan or in other users of database also.
    for the other users i given relative grant permissions to access this USERS table and maintain relation to it.
    now, my requirement is how to check the number of references to pavan.users.id
    how many tables are dependent on it.
    thanks in advance.
    regards
    pavan

    Try this
    select a.owner,
           a.constraint_name,
           a.column_name,
           a.table_name,
           c.table_name Referenced_table,
           d.column_name referenced_column
    from
            all_cons_columns a,
            all_constraints b,
            all_constraints c,
            all_cons_columns d
    where a.table_name=b.table_name
    and a.constraint_name=b.constraint_name       
    and b.constraint_type='R'
    and b.r_constraint_name=c.constraint_name
    and c.constraint_name=d.constraint_name
    and a.owner='PAVAN'
    and c.table_name='USERS'
    and d.column_name='ID'

  • How many gigs will I need for a LG G3 phone?

    I just purchased a G3 phone. I only signed up for 1/2 gig of data because I will only be using the phone for talking and occasional texting. I won't use the internet at all. (And won't be using any apps, email or anything.)  Somebody advised me that 1/2 gig will not be enough -- that I will need 2 gigs -- even if I'm not using internet. They said that data is constantly being used, every time I use the phone. Is this true?  Will I need to update to 2 gigs?  Any opinions or advice on this will be greatly appreciated.  Thank You.

    I'm confused as to why you would upgrade to a smartphone with no intention to use the Internet features. There are many wonderful apps out there that keep you informed (most newspapers, radio stations, tv stations have apps), help you keep track of your personal finances (credit cards, bank accounts, etc), navagation apps (no need for a separate gps anymore!), share files, etc.  Even fun things like Shazam, where you hear a song and you just need to know who's performing it!
    1 GB should be fine for light users. I use Chrome a lot and watch some videos, plus I am always reading the newspapers online and checking twitter, instagram, etc.  I have trouble connecting to Xfinity wifi hotspots with my G3, and I am not constantly around places that offer wifi.
    Just make sure you have the phone set to only update apps over wifi.  And restrict background data on apps as well.  That should eliminate a lot of phantom/unnecessary data usage.
    I use about 5GB a month.  People on unlimited plans who are streaming lots of music and video and transferring files can use hundreds of GBs a month.
    Have fun with your new phone!  Check out Google Play and download some apps.  You can always turn mobile data on and off from the settings menu as you like.

  • How can I know how many processors do I need for a new SQL Server machine?

    My company intend to buy a new server and will dedicate that for SQL Server which will serve an in-house developed application.
    How can we know how many processors are enough to buy?
    I know that each SQL Server edition and version has it's different limitation of the number of processors it can support, for example SQL Server 2012 Standard Edition can support up to 4 sockets or 16 cores per SQL Server Instance, but this does not mean
    that I have to buy 4 physical CPUs. two could be enough. how can I know? 

    How can we know how many processors are enough to buy?
    I know that each SQL Server edition and version has it's different limitation of the number of processors it can support, for example SQL Server 2012 Standard Edition can support up to 4 sockets or 16 cores per SQL Server Instance, but this does not mean
    that I have to buy 4 physical CPUs. two could be enough. how can I know? 
    This is off topic question how can we answer it. We even dont have any knowledge about your application.
    Please speak to licensing specialist about servers and cores below link will give you more information.
    https://msdn.microsoft.com/en-us/library/ms143760.aspx?f=255&MSPPError=-2147217396
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • How many GB would I need for an iPad being a college student

    I am a college student who would like to purchase an iPad so I don't have to take my Macbook/textbooks to class with me all the time. I will be putting textbooks, class notes, an a few apps on it. How many GB would you suggest?

    As many as you can afford. Data always seems to have the ability to expand to the size of the storage.

Maybe you are looking for