How many ports do I need to open for Java InfoView? - CR Server 2008 v1

Hi,
We are using Crystal Reports 2008 V1 (BuildVersion=12.1.0.114.CRS2008_V1). CMS runs on Oracle 10g. The product I need help for is InfoView.
The report server is behind a firewall. I would like to know how many ports do I need to open and what they are so that I can access to InfoView (Java Version) from internet.
The client's IT blocks all ports, except HTTP 80 and HTTPS 443. Is it possible to configure InfoView to run on port 443? Would one port be enough? Port 80 is being used by another application.
I would appreciate any light to be shed on this issue.
Thanks,
Sinan

InfoView will just need a single port. However CR Server 2008 has additional component who interact. I believe that CR Server 2008 doesn't allow a distributed installation so then the only port that should be opened on the firewall is to reach the web application and from the application server towards the database server hosting the CMS database.
Hope this helps...
Martijn van Foeken
Focuzz BI Services
http://www.focuzz.nl
http://nl.linkedin.com/in/martijnvanfoeken
http://twitter.com/mfoeken

Similar Messages

How many Scan Listeners, we have to configure for 5 Node RAC?

Dear Professionals,
How many scan Listeners we need to configure for 5 Node RAC? Oracle will not allow us to create More than 3 scan's? What If i have one scan Listener per each for 1st 3 node's? what about remaining two Node's? How application user will connect to 4 or 5 Node? Can you please explain..? Forgive me, If am totally wrong?
Thanks
Sagar

Each of the 5 instances will register itself with the scan listener (using the instance parameter remote_listener). Thus, the scan listener is "aware" of the database instances on the other two nodes where it is not running. It can still redirect incoming connections to the local listeners on these nodes (registered as local_listener).
Hemant K Chitale

How many port numbers do I need assigned for an XIR3 deployment

How many port numbers are required per XIR3 environment on Linux Red Hat 4/JBOSS/? I only plan to use the following apps (CMC, Infoview, Designer, Report Migration Tool, Import Wizard).
Am I right in thinking it's four ports ?
1. 1 for the application
2. 1 for SIA?
3. 2 for CMS (Name server port, request port)
If this is incorrect could someone clarify how many, and what for?
Many thanks in advance

Hi there,
When I look at the Servers list and look at the CMS server I see three potential port numbers:
1. Request Port
2. Hostname or IP Address
3. Name Server Port
I know we need the third one so can I ask why you say you only need two servers for the CMS, as the list above seem to be suggesting three?
Thanks for your help in advance

How many problems do you need to have with a mac book pro to get it replaced i have had 6 problems and they say they have fixed everything and somthing new happends

how many problems do you need to have with a mac book pro to get it replaced i have had 6 problems and they say they have fixed everything and somthing new happends
I have had thehad the:
ram replaced
Battery
Audio
Trackpad
os operating system
fans
And they still won't replace the laptop for me worst buy ever but i have had a imac for 2 months and nothing at all wrong .

You could try calling Apple and ask for Customer Relations.
From Readers Digest-February, 2005
How to Complain
You call customer service to complain about a product, and you hang up angrier than when you started. That’s customer rage, a feeling experienced by millions of people with a major complaint, says Scott Broetzmann, president an American firm that tells companies how to offer the best customer service. His secrets to getting good service:
Have a goal
If you want your product repaired, say so. Want an apology? Speak up.
Keep it short
Focus on one problem, and be succinct.
Stick with it
You have to invest the time it takes. Don’t get what you want? Ask for a supervisor.
Skip ultimatums
Don’t threaten not to do business with them again. Why should they help you if you won’t buy from them in the future?
Plead your case
Many companies have information such as how much money you’ve spent with them and how often you complain. If you’re a good customer, they may be more willing to help.
Be nice
You’re unlikely to get what you want if you’re rude.
Good luck.

SCCM 2012 What Ports Do I need to open so DMZ servers can communicate with my SCCM Server?

Hi,
What ports do I need to open in the firewall so my DMZ servers can talk to my SCCM server on the network?
Here are my steps before to make my DMZ servers talk to my SCCM server:
1. On my SCCM 2012 SP1 CU2 I have bounderies installed --> I install SCCM Client on my DMZ server with the appropriate switches --> I go back to my SCCM server to approve the server --> Works
But now my DMZ servers stops getting definition updates from my SCCM server and I was suggested that it is much easier to open ports in DMZ.
Now, could you please tell me what ports should we open to ensure two way communication among servers?
Thanks!

Yes and no. It's a bit muddy at times.
For Internet based clients, putting an Internet-enabled MP in the DMZ is perfectly acceptable because Internet clients will only choose MPs enabled for Internet communication.
For systems in the DMZ, that's where it really gets muddy. There's no perfect way to accomplish this. IMO, DMZ clients should be allowed to go back to the MP/DP in the Intranet with a targeted opening in the DMZ firewall rules that allows them to only go
to the internal MP. That's a security policy question though for your organization.
Another option is to treat the clients in the DMZ as Internet only clients. This way, they will only go to the Internet MP in the DMZ. You do lose some functionality though like Remote Control.
A final way is to actually put an MP/DP in the DMZ and deal with the timeout's that happen when clients try to talk to the MP in the Intranet. Clients will try 5 times to contact that MP before giving up. They try to find a new MP at the following times
(which are not configurable):
- Every 25 hours
- WHen the client detects a network change
- When the client agent starts
Jason | http://blog.configmgrftw.com

ISCSI MPIO, how many path do I need to create

Hi,
I've a server with 4 NIC connection to a DELL MD32xx which have 8 NIC.
My question is how many path do I need to create under iSCSI connection.
Do I need to create a path from each Server NIC to each MD32xx NIC, which will make 32 connection (and doesn't make sense).
If not, how should I proceed, I've looked at many example and none seem to cover that kind of situation, they just directly connect the server NIC to the MD32xx NIC instead of going through switch for redundancy.
Thank
ML

Hi,
I've a server with 4 NIC connection to a DELL MD32xx which have 8 NIC.
My question is how many path do I need to create under iSCSI connection.
Do I need to create a path from each Server NIC to each MD32xx NIC, which will make 32 connection (and doesn't make sense).
If not, how should I proceed, I've looked at many example and none seem to cover that kind of situation, they just directly connect the server NIC to the MD32xx NIC instead of going through switch for redundancy.
Thank
ML
Please follow the guides and discussions here:
Windows MPIO Setup for Dual Controller SAN
http://social.technet.microsoft.com/Forums/windowsserver/en-US/3fa0942e-7d07-4396-8f2e-31276e3d6564/windows-mpio-setup-for-dual-controller-san?forum=winserverfiles
It's MD3260 so can be used for 32xx storage unit with iSCSI uplinks.
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

HT1222 How many GB do I need to download video

How many GB do I need to download video

It depends on the size of the movie, the capacity of your iPad and how much space you have left, so you need enough to hold whatever the size of the video is and still leave about 10% of your total storage space available.
Most Movies are at least 2GB. I have seen some that are over 6GB.

What is the model number and how many ports in the back?

What is the Model number and how many ports int he back?

You can compare your yourself here:
http://www.apple.com/wifi/
The AirPort Express is Model Number A1394
The AirPort Extreme is Model Number A1408

How many GB do I need to download a rental movie from ITunes?

How many GB do I need available to download a movie?

The description in the iTunes Store gives the size of the movie. If you are acquiring it from elsewhere, the information should be available.

HT4623 How many gigabytes do I need spare on my iphone4 to upgrade to ios7 ?

How many gigabytes do I need free on my iphone4 to upgrade to ios7 ?

Then update using iTunes on your computer. You'll be fine & you don't have to delete anything. You only need that much free space if you update OTA. Once the update is done, you get the space back. So, use your computer.

How many NWDI do I need?

Hi!
Our company is an SAP outsourcing unit. We have about 16 landscapes with
all kinds of SAP products.
We are going to use NWDI to handle JAVA transport.
Could you inform us how many NWDI do we need?
Thanks a lot!

Hi Jennifer,
This might help, read
http://help.sap.com/saphelp_erp2005/helpdata/en/42/f1a03611d83ee4e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/54/347a2a840246b1bbd8fc9154be6658/frameset.htm
Regards
Juan
Please reward with points if helpful

How many cals do i need?

Let say i have 300 active directory accounts but only 100 physical users (with heartbeats), how many CALs do i need per user CAl licensing? Also, if i have 300 emails accounts in exchange 2010 but only 100 physical users, how many exchange CALS do
i need? And if 5 users leave the company, does the CALS be free up for the next employees?
Based on my research, i need 100 AD CALS and 100 exchange CALs but i getting conflicting information. Can someone who knows licensing really well confirmed this?
Thank you.

Hi My3cents,
Sorry for the delay reply.
For licensing related issue, you’d better contact Microsoft licensing team. In the United States and Canada, you may call the licensing team directly
at 1-800-426-9400 (select option 4), Monday through Friday, 6:00 A.M. to 5:30 P.M. (PST) to speak directly to a Microsoft licensing specialist. In this way, you will know the detailed information about license.
Worldwide customers can use the Guide to Worldwide Microsoft Licensing Sites http://www.microsoft.com/licensing/worldwide.aspx to find contact information
in their locations.
Thank you for your understanding!
Best Regards,
Anna

How many WHEREs do we need in minimun when we have 4 FROMs in the statement

How many WHEREs do we need in minimun when we have 4 FROMs <tables> in the statement?

Technically none - but it produces cartesian join:
SQL> SELECT * FROM scott.emp, scott.dept, scott.salgrade;
     EMPNO ENAME      JOB               MGR HIREDATE        SAL       COMM
    DEPTNO     DEPTNO DNAME          LOC                GRADE      LOSAL
     HISAL
      7788 SCOTT      ANALYST          7566 87/04/19       3000
        20         40 OPERATIONS     BOSTON                 3       1401
      2000
      7839 KING       PRESIDENT             81/11/17       5000
        10         40 OPERATIONS     BOSTON                 3       1401
      2000
     EMPNO ENAME      JOB               MGR HIREDATE        SAL       COMM
    DEPTNO     DEPTNO DNAME          LOC                GRADE      LOSAL
     HISAL
280 wierszy zosta│o wybranych.

How many servers are generally needed to a medium size HFM project

Hi,
I am new to HFM.Can any one help me that How many servers are generally needed to a medium size HFM project? And details that servers are for what segments?
Thanks in advance.

Hi,
You can use one serwer only for everything (provided that you use classic application).
Number of servers depends on the number of planned applications, the number of users, number of entities, number of accounts, the amount of calculation...
Best,
Marcin Kuzdra

How many NWDI do we need?

Hi!
We are an SAP outsoucing company with many different
landscapes for MI, EP, ECC, XI, SM, etc.
We have decided to use NWDI to handle all JAVA change management.
Some SAP systems can be in the DMZ.
So how many NWDI do we need? Is one enough?
I'll give points. Thanks!

Hi Laura,
this doc shows typical NWDI scenarios/landscapes with XI
read just the first section and you will know
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

How many ports do I need to open for Java InfoView? - CR Server 2008 v1

Similar Messages

Maybe you are looking for