How many printed pages?

I have an HP photosmart D110 and I seem to be going through a lot of ink. I have it set to economy and we really don't print anything very detailed (homework, shopping list, etc). I'm putting my 3rd cartridge in today and have printed less that 400 pages total to date. Is this normal? We picked this print because the cartridges were cheap, are they cheap because you have to replace them every 100 pages?
Let me know your experiences.

The standard #60 cartrdiges are rather small. If you print a lot you might consider the XL version, with about 3x the pages at a bit over 2x the cost. See here for page yield estimates for the #60 series cartridges.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

How to print page numbers in adobe form

Hi,
Can anybody tell me how to print page numbers in adobe form.
Thanks in advance
Chaitanya

Hi,
Yes the field page n of m is used normally for printing page numbers. But it won't display the current page of total pages by itself. You have to set the run time property to n (current page ) and m (Total number of pages). Carefully select the # (current page ) and ## (Total number of pages). Hope this works for you.
My requirement is to have the user control on current page. For Example:
Example for a Invoice with 5 PO items (stands on 2 pages) :
1st page is the letter : no page number
2nd page is the 1st page of the 1st copy of the invoice : we should read u201C1 / 2u201D
3rd page is the 2nd page of the 1st copy of the invoice : we should read u201C2 / 2u201D
4th page is the 1st page of the 2nd copy of the invoice : we should read u201C1 / 2u201D
5th page is the 2nd page of the 2nd copy of the invoice : we should read u201C2 / 2u201D
Presently i cam getting the current page number for page 4th as 3 / 2 and for 5th page 4 / 2. I could able to control the total number of pages from print program. But when i am printing the second copy (4th and 5th pages), I couldn't able to control the current page number. I need to initialize the Current page count (4th page ) as 1.
I have used the follwing java scripting:
this.rawValue = wv_pages - xfa.layout.page(this)
where wv_pages is total no of pages calculated from print program.
Please help me in this regard with some formcal or java scripting conditions.
Thank You,
Regards,
Naresh.

In Safari why dont I have icon in toolbar that shows how many open pages I have?

Apparently when using Safari on the iPad there should be a little icon in the toolbar that looks like a rectangle and has various numbers in it. Apparently this shows how many open pages you have. When you tap on that icon, you are shown a page with thumbnails of the pages you have open. Unfortunately my husband's iPad does not have that tooblar icon. I cant seem to find any answers on the internet, from friends, from the IT people at work, the local people who sell iPads. Thanks to anyone who can help.

That was the case in iOS 4, but its not the same in iOS 5. Apple moved to a tab-based interface for the iPad in iOS 5. The old thumbnail view is no longer included.
Regards.

How to print page no/total pges in report programing?

how to print page no/total pges in report programing?

Hi
This is an example:
In TOP-OF-PAGE you can write:
WRITE: SY-PAGNO, '/', '-----'.
When the program has finished to print all data, run a routine like this:
Declare a variable
DATA: L_PAGE_COUNT(5) TYPE C,
      V_LINE TYPE I. "The line where page number is written
* In my example I suppose the page number is always
* written in the first row of the page.
V_LINE = 1.
* Copy this code to the end of program
* Page count will be printed on each page here
WRITE sy-pagno TO l_page_count LEFT-JUSTIFIED.
DO sy-pagno TIMES.
    READ LINE V_LINE OF PAGE sy-index.
    REPLACE '-----' WITH l_page_count INTO sy-lisel.
    MODIFY CURRENT LINE.
    ADD 1 TO sy-index.
ENDDO.
Max

How can I see how many prints I have printed?

Hello all,
My office currently uses an HP Officejet Pro 8600 Plus. We are reevaluating our printing needs, and I would like to be able to see how many prints we currently print/have printed on the printer if at all possible in order to see what our needs may be.
On my old office Ricoh printer, it told us how many colour and how many b&w prints we did per month. If there is a similar function to this for HP please let me know.
Regards,
R
This question was solved.
View Solution.

This info is available through the EWS, the Embedded Web Server. simply go to you IP address of the printer in your web browser. Select Tools and Printer information
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How to print page numbers on physical pages conditionally?

Hi,
my report has a single logical page comprising of 3 reapeating frames , each getting printed on 3 different physical pages. I need to print page number at the bottom of the page in the case of two repeating frames while on the side of the page in the third case. How do I do this?
TIA
Ranjit

i think u only need to say page break before on ur third repeating frame and ur problem is solve.
repeating frame 1 and 2 on the firstpage getting page 1 and repeating 3 on page 2.
cheers.

How to print page in front and back in scripts

hi,
I want to know to know the how to print a page in front and back.

HI Ragavendra
set this
Print mode is D
With Print mode, you can specify single- or double-sided printing for a page. You can choose from the following values:
D The page is printed on the first side of a sheet in duplex mode. If another mode was previously active, then the printer is switched to duplex mode with the start of the pageand continues in this mode.
and other Print mode options are
Print mode
With Print mode, you can specify single- or double-sided printing for a page. You can choose from the following values:
' ' Currently active printing mode continues unchanged.
S The page is printed in simplex mode. That is, the printer should print on only one side of the paper. If another mode was previously active, then the printer is switched to simplex mode with the start of the page.
D The page is printed on the first side of a sheet in duplex mode. If another mode was previously active, then the printer is switched to duplex mode with the start of the pageand continues in this mode.
T The page is printed on the first side of a sheet in tumble duplex mode. That is, the printer prints on both sides. The page on the second side is always inverted, so that the footer of the second page is printed opposite the header of the first page.
If another mode was previously active, then the printer is switched to tumble duplex mode with the start of the page and continues printing in this mode.
Print modes are currently supported for printers that use the PCL-5 language. These are printers that are defined with the following SAP device types: HPLJ_II, HPLJIIID, HPLJ4, LX4039, SNI20XX8.
See the spool system (transaction SPAD) to check on how your printers are defined.
The print controls for these functions are SPMSI (begin simplex printing); SPMDU (begin duplex printing); SPMTU (begin tumble duplex printing); SPMFS (print on first side of sheet in duplex or tumble duplex mode); and SPMBS (print on second side of sheet in duplex or tumble duplex mode).
Regards Rk

How to print page no in standard sap report..

Hi All,
I am taking print out of standard reports but page no. is not showing.
How to set page no. ? Which transaction ?
Through SPAD we can set page no. ?
Yusuf

Hi!
It depends on the standard program. Maybe it can be set with one of its checkboxes on the selection screen.
If it cannot be set, then the standard list does not provide the page numbers.
Youhave to copy into a Z-program if it is really neccessary.
Regards
Tamá

How many printer can I host on an Apple server 10.6.8 in ServerAdmin Print service?

I had 53 printers recently (two weeks ago) on our printserver and kept getting the error message:
"The service has encountered an error. Try to refresh the view (printserver.local/Print). (kNetworkError)"
This message would come up multiple time while loading the Print service or the Printer queues in Print service.
I had 20 printers setup on this same server last school year and had no problems.
When we redesigned our network this summer, I had to setup the printers again as the IP addresses had changed.
after adding the original 20 printers and adding the other 30, I then started to notice an obvious slow down in ServerAdmin app while loading the Print service and the Print queues. The grey gear wheel showing that the system is processing, would never stop spinning.
It would take up to 20 minutes for the Print queues to load and even after they did load the gear wheel never stopped spinning.
When I would attempt to make a change in any Printer queue i.e. selecting a print protocol (SMB, LPR), the system would not Save the change even though the system allowed me to click the Save button.
So, any suggestion on how many printers I can effectively Host on an Apple server 10.6.8+?
Thanks,
Vince

Hi
I think your main problem may lie here:
"When we redesigned our network this summer, I had to setup the printers again as the IP addresses had changed"
Correctly resolving DNS is crucial for OS X Server's reliability and robustness of services. It needs it simply to resolve it's own name to its IP Address regardless of what service your running. If when making the changes to your network you made no allowances for this then you will experience this:
"The grey gear wheel showing that the system is processing, would never stop spinning."
With increasing regularlity.
To answer your question AFAIK you can add as many printers as the USB bus can support. If these are networked printers you're adding, and if it was me, I would not add them to OS X Server's Print Service.
HTH?
Tony

How to print page numbers like 'Page 2 of 10' on an ALV report

Hi,
I've seen a few threads regarding this, but haven't seen any code that actually works.
What I'd like to do is print page x of y (i.e. Page 2 of 10) on an ALV report once the report is printed.
Is this actually possible? If so, what are the steps and coding required?
I greatly appreciate your help experts!
Mark

Hi Mark,
I think there is no better way than calculate it before doing the output. If you do not have extra-new-page, the total number of pages may be calculated as the number of lines displayed divided by lines on one page - this will depend on the lines used for top-of-page and end-of-page. Also filters and subtotals could not be used.
An other approach could be to read the current page number in end-of-list event and then scan the whole list using READ LIST and MODIFY LIST in each page top accordingly.
Because it is decades ago I printed a list last time I will never have the chance to try.
Regards,
Clemens

How to print page dynamically in smartforms

Hi All,
Please help on below case...
1. I have developed a smartform which has 5 pages in total . Through driver program passing 4 internal tables...
first page - will print all times... - consuming first internal table data
second page - need to print dynamic - consuming data from second int table
third page - need to print dynamic - consuming data from second int table
fourth page - need to print dynamic - consuming data from thrid int table
fifth page - need to print dynamic - consume data from fourth int table
dynamic condition is determined in driver program ... but how to implement dynamic determination in smartforms..
sometimes ...based on data ...we need to print first page , and fifth page only ...
as of now all 5 pages are printing ...
Expect the advise from expertist...
Thanks and Regard
Ramasi
Edited by: ramasi on Sep 1, 2011 11:29 AM

Hello,
Plz use this code, may be it will help you as given below:
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = '0001'
language = sy-langu
name = v_name
object = 'VBBP'
TABLES
lines = dt_lines
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
But kindly note that plz don't use the exception (code) for the purpose, May be thi will hlp you for the purpose.
Thanks & Regards,
Akg

How to print page number in Pages

Please help. I have inserted the page number in my document and I see it the print preview, but when I print it just doesn´t print the page number.

It sounds like you have the page number too close to the edge of the paper and your printer simply does not print to the edge.
Test how much of the page your printer prints, by covering a page with a colored object from edge to edge and seeing how much is clipped off.
Peter

Texy edit - how to print page numbers only

I wish the page numbers in TextEdit to be printed on my documents; in TextEdit preferences, when I select the option to number pages when printing, it also prints the date and document title. How can I have it only print the page numbers?

It doesn't seem like you can just have the page numbers printed with TextEdit. When the help text appears in the preferences for printing the number of pages, it indicates it will also print the date and the title, so it is doing what it is designed to do, despite the misleading label for that item. Maybe another application (AppleWorks, BBEdit, Word?) can print just the page number.

TextEdit: how to print page numbers w/o Header

I see the option to check "print footer and header" in the print dialog box. Anyone know how to just be able to print the page numbers in TextEdit (without the Headers on each page)?
Thanks in advance for any help with this!

TextEdit is a relatively simple program, with limited options. As such, I doubt the "print headers and footers" options are easily customizable. Other word processors have the ability to manage headers and footers separately. If you've got Pages, or Word, or the free alternatives such as OpenOffice/NeoOffice then you can set up your documents to print just header or footer info with only page numbers.

How to print pages from multiple pdfs

Friends,
I have two pdfs.
I need to print not all, but certain pages from both pdfs. How to achieve this.
Regards,
John.

Options:
1) create a new form, copy all the pages from your source pdfs into this one, use scripting to control the page appearance
http://www.adobe.com/devnet/livecycle/articles/lc_designer_scripting_basics/lc_designer_scripting_basics.pdf
2) use the workaround to concatenate multiple forms and try to use the same approach to remove pages you don´t like
There are no other options.
Otto

How many printed pages?

Similar Messages

Maybe you are looking for