How many products Do I have to install for my final application

Hello everybody,
I want to install my final application for an end user, but I don4t know how many products Do I have to install in that client. Does anybody Know something about it?
Thanks in adviced

I have already done, but it doesn't run and display this message:
"FRM-40735 Pre-Form Trigger raised unhandled exception ORA-06508"
and in my PC works OK.
Thanks for your help

Similar Messages

  • How many times do you have to pay for Creative Cloud complete plan prepaid if it says an amount of money per year? do you have to pay that every year?

    how many times do you have to pay for a Creative Cloud complete plan prepaid if it says an amount of money per year? do you have to pay that every year?

    Perhaps the unclear part here is that the Cloud is a subscription offering. You never pay for it outright and never actually own it.
    12 months pre-paid simply means paying the full 12 months subscription upfront. The following year, you do the same. And the same every year after that.
    Like any subscription, if you want to keep using the software, you keep paying the monthly (or annual) fee every month (or year), year in, year out.
    When you cancel your subscription, or it expires and you don't renew, then the software stops working.

  • How many Scan Listeners, we have to configure for 5 Node RAC?

    Dear Professionals,
    How many scan Listeners we need to configure for 5 Node RAC? Oracle will not allow us to create More than 3 scan's? What If i have one scan Listener per each for 1st 3 node's? what about remaining two Node's? How application user will connect to 4 or 5 Node? Can you please explain..? Forgive me, If am totally wrong?
    Thanks
    Sagar

    Each of the 5 instances will register itself with the scan listener (using the instance parameter remote_listener).  Thus, the scan listener is "aware" of the database instances on the other two nodes where it is not running.  It can still redirect incoming connections to the local listeners on these nodes (registered as local_listener).
    Hemant K Chitale

  • HT201238 How many months do you have to pay for 20gb data

    I Would like to know how long you have to pay for the storage

    It's every month, unless or until you decide to cancel your subscription and revert to the free 5Gb storage.  I've just had to upgrade to the 200Gb option because of the new Photos app, and figure that it's going to cost me £36 a year, which I'm going to have to live with.

  • How many paper should i have to give for certification

    hi all,
    i have heard a news that for ABAP Certificaion,threre are three paper i-e,
    1)Begginer.
    2)Associate.
    3)Professional.
    Is it right or wrong.kindly update me so i'll prepare for my exam.
    Thanks,

    For any kind of certification in SAP, you need to just take one certification test.
    The "papers" that you mentioned are actually levels.
    If you are a fresher, please go for the "Associate" level certification.
    Similarly, depending on your experience, you can go for other levels directly.
    Please note that you need not pass 3 "papers" or "levels" to be certified.
    Every level in itself is a certification.
    Request you to contact SAP India Office at the given numbers on above link. Or contact any Authorized Training Center in your city.
    Rgds,
    Zub

  • How many computers are you allowed to install cs3 Production suite on?

    how many computers are you allowed to install cs3 Production suite on?

    >install it on an indefinite number of computers?
    You can put the install disc in 1 or 2 or 2000 drives... but that doesn't mean that the activation will work on more than two at a time
    Since activation is required to use the program... you are limited to 2 installs at a time
    As has been discussed in other threads, you must DE-activate one of your two allowed activations before you may activate on another computer
    PS - I think I have also read in the forums that there is some limit to how many times you may activate and deactivate and activate again (no, I don't know the number... I just remember that there was some discussion of such)

  • How many times do I have to download and install Firefox 34.0 Beta 7? Software update asks me to do this (and I do) at least once a day. Yes, I have restarted.

    Using MacBook Pro, 15", early 2008, 2.4G Intel core 2 duo, 4G ram. Software update asks to update Firefox 34.0 beta7 every day. If I update, it just asks me to do it again. It has done this through the last several Beta updates. It's a bit disconcerting, since the updates are supposedly for security and stability. Let me put the question in another way: how many times do I have to ignore the update request before it quits asking? This is all causing me to regret making Firefox my default browser, especially since Safari has been improved so much.

    Even so there is only a average of nine Beta test builds for each version in six weeks, so not that often.
    Sound like you the update is not installing perhaps due to read/write permission issues.
    Try downloading the 34.0b7 dmg from https://www.mozilla.org/firefox/beta/all/

  • How many times can a team member install Creative Cloud for teams ?

    How many times can a team member install Creative Cloud for teams ?
    Is it possible for one team member to install it for example on a portable mac and a desktop pc at the same time?

    From the Creative Cloud FAQ at https://www.adobe.com/products/creativecloud/faq.html under the Purchasing and getting started section:
    On how many computers can I install the software I download from Creative Cloud?
    You can install the desktop applications available in Creative Cloud on your primary computer and one backup computer, as long as they are not running at the same time. You will have access to both the Mac OS and Windows versions, so if you have a Mac at home and a PC at work, for instance, you can install your applications on both. See the product license agreements page for more information.

  • How many Apps can i have on my iPod Touch, is there a limit?

    Is there a limit on how many Apps i can have on my iPod Touch?
    Thanks in advance.

    Thanks a lot, that was very helpful.
    I am pretty sure that there's 16 Apps per page,
    so...16 X 9 = 144 - 13 pre installed Apps.
    131 total available (slots) for Apps.

  • How many administrators can I have in my MAC OS server ?

    I have installed a mac os server and I wonder how many administrators can I have.

    As many as you like. There's no limit. Any user account with admin credentials on the server can administrate the server.

  • How many IDE drives & CDrom can be installed with SATA drives??

    How many IDE drives & CDrom can be installed with SATA drives??
    i have 2 IDE hard disks & 2 CDROM drives: can install SATA hard disk added to these drives or do i have to remove some???
    & if it can be added, can i install 2 SATA drives???
    THX in advance

    The 3 versions of this board that are available are:
    875P Neo-FISR (PCB 2.0)
    875P Neo-LSR (PCB 1.0)
    875P Neo-FIS2R (PCB 1.0)
    All of these boards will have the following ports provider by the chipsets ICH5R south bridge.
    2 x SATA (Supporting 2 SATA HDD drives)
    2 x PATA (Supporting 4 IDE devices)
    All 6 of these can be used at the same time (provided you are using win XP or 2K) you just need to make sure yor BIOS is set right.
    ->INTEGRATED PERIPHERALS
    ->ON-CHIP IDE CONFIG
    ATA CONFIG: S-ATA ONLY or P-ATA ONLY
    S-ATA/P-ATA KEEP ENABLED: YES
    OPERATE MODE:
    If you set to "legacy mode" S-ATA are set to channel 1 and 2 and P-ATA to channel 3 and 4. If you set to "native mode" P-ATA are channel 1 and 2 and S-ATA 3 and 4. You can only use the raid functionfon SATA in native mode.
    If you have the 875P Neo-FIS2R (PCB 1.0) you will also have the following ports provided by the Promise PDC20378 PCI controller:
    2 x SATA (Supporting 2 SATA HDD drives)
    1 x PATA (Supporting 1 Master IDE HDD drive)
    The PATA port is limited to 1 Master HDD by the lite BIOS. This can in theory be upgraded to the full BIOS supporting a master and a slave, but this may obviously void your warranty.
    So the answer to your origional question is:
    2 x SATA HDDs and 4 x IDE HDD/CDROM if you have 875P Neo-FISR (PCB 2.0) or 875P Neo-LSR (PCB 1.0)
    or
    4 x SATA HDDs, 1 x IDE HDD (2 if you modify the BIOS) and 4 x IDE HDD/CDROM if you have 875P Neo-FIS2R (PCB 1.0)

  • How many ipods do i have to go through with the red x?

    i have had 3 ipods in the past 6 months the recent one ive had for 3 weeks after getting it back ive sent in 3 ipods so far and getting tired of putting music and videos on it and having it end up with the red X. how many ipods do i have to go through before it wont break?
    Message was edited by: heytheredude878
    Message was edited by: heytheredude878

    You need to upgrade to Snow Leopard first. Contact Apple to buy a Snow Leopard installation DVD.
    Make sure your system meets Snow Leopard's requirements:
    Mac OS X v10.6 Snow Leopard system requirements
    To install Snow Leopard for the first time, you must have a Mac with:
    An Intel processor
    An internal or external DVD drive, or DVD or CD Sharing
    At least 1 GB of RAM (additional RAM is recommended)
    A built-in display or a display connected to an Apple-supplied video card supported by your computer
    At least 5 GB of disk space available, or 7 GB of disk space if you install the developer tools
    Once you have Snow Leopard, you can upgrade to whatever your MacBook will support.
    There is no need for sequential upgrades. The reason Snow Leopard is a prerequisite for further upgrades is that it includes the App Store. All OS versions subsequent to Snow Leopard are distributed that way.

  • How do you tell how many Safari's you have open?

    I am new MacBook user and am haven't figured out how to tell how many Safari windows I have open or how to quickly navigate between them. When using XP I would just click on the IE I want from the taskbar, or if they are grouped select the one I want from within in the group.
    For Safari it appears I can either click on Windows -> select from the bottom of the list, or click and hold the Safari icon and wait until a list appears and then select from that list. Both of these options seem slow and laborious for a keyboarder.
    - Is there a way to make the individual Safari's show up when I do a Command -> Tab?
    - Or is there some functionality I am just unaware of to flip between Safari windows?

    Hi
    Welcome to Apple Discussions and Mac Computing
    I am new MacBook user and am haven't figured out how to tell how many Safari windows I have open or how to quickly navigate between them.
    The best way to navigate with Safari is to activate Tabs via the Safari Menu (at the top of the screen, to the right of the Apple Menu)>Preferences. In the Preference panel, click on Tabs and check the 3 boxes.
    Using your "hot keys" Command/T keys will create a new tab.
    In the browser window, various Tabs that are opened will appear below the Tool Bar (where the web site address is displayed). Clicking on a tab takes you from one site to the next (similar to what you see in Internet Explorer (where the Tabs are along the bottom of the screen).
    If you install 3rd party add-on Glims, you'll add a number of very useful features to Safari, including more options with the Tabs. Once installed, you'll find the Glims options as a separate panel in Safari Preferences panel.
    Post back

  • How many production MRLs?

    My company is only running Documaker in batch, but we've recently been exploring adding EWPS and IDS to enable some real-time functionality. We have five main lines of business, and all form resources for our lines of business are stored in one database-backed MRL (SQL Server). We've heard some companies maintain separate MRLs for each line of business, and might even break up their MRLs further based on batch/real-time. So, simple question for everyone out there: How many production MRLs do you maintain? How's that going for you?
    Thanks for any responses!

    Aaron,
    Up here, we have multiple lines of business and multiple trademarked brands and our batches are divided accordingly for a total of 10 batches. We do parallel processing, meaning that at any given time during the night cycles, all 10 batches may be running concurrently. These 10 threads are all connected to the same CB5-based MRL and we’ve never had any issues related to that setup.
    Gaétan.

  • In Safari why dont I have icon in toolbar that shows how many open pages I have?

    Apparently when using Safari on the iPad there should be a little icon in the toolbar that looks like a rectangle and has various numbers in it. Apparently this shows how many open pages you have. When you tap on that icon, you are shown a page with thumbnails of the pages you have open. Unfortunately my husband's iPad does not have that tooblar icon. I cant seem to find any answers on the internet, from friends, from the IT people at work, the local people who sell iPads. Thanks to anyone who can help.

    That was the case in iOS 4, but its not the same in iOS 5. Apple moved to a tab-based interface for the iPad in iOS 5. The old thumbnail view is no longer included.
    Regards.

Maybe you are looking for