How many Quicktime videos can be place on an IWeb page?

I'm having problems placing more than two Quicktime videos on a page at a time. Suggestions are welcome. Thanks

You really don't want more than one "movie" on a page for this reason:
Each file will download when the page is opened. This waste bandwidth (you pay for it) and wastes the time of your visitors.
One little neat way to have hundreds (thousands if you wanted) of QuickTime formatted files served from your page would be to use QuickTime Media Link files (.qtl). These are text based files that really point to another QuickTime file stored on your server.
They can be made from any app that exports to QuickTime formats.
http://homepage.mac.com/kkirkster/.Public/Tiny_Movie.qtl
One of mine as an example.
No wasted bandwidth and extra features in your file to boot!

Similar Messages

  • How many push buttons can u place on selection screen application tool bard

    hi
    how many push buttons can u place on selection screen application tool bar
    and what is default function code for that buttons.

    Hi Chaitanya,
    You can place maximum 5 push buttons on Application Toolbar.
    please award the points incase if you are able to get the solution.
    Thanks
    Sivaram

  • How many internal HDs can I add to my G4 AGP tower?

    Hi all,
    How many internal HDs can I add into my G4 tower? I want to buy and use a SATA controller PCI card to break the 137 mb barrier and add 3 or more hds for my graphics art files, video and music files. Sort like a server right?
    Thanks
    web dude

    Hi, Web dude -
    What do you mean by this? They have power packs plugged to them and they're plugged in a strip?
    Yes.
    The firewire bus is designed to be able to provide power for use by an attached device, in addition to providing a data pathway. There is a limit as to how much power can be provided by that bus. Such power is used by the device to operate its mechanics - in the case of a firewire hard drive, to run the motor that spins the platter(s) in the drive.
    Many, if not most, firewire devices can also be powered by using a separate power supply, often an external transformer although some may have that transformer built in. This necessitates a separate connection to line power, typically to an outlet on a power strip or surge suppressor strip.
    When I ordered each of my firewire drives, I also ordered the optional power supply for it. This makes each drive non-dependent on the Mac for operating power.
    How should I prevent over heating my G4?
    As far as keeping a Mac from overheating, the primary defense is to keep it clean inside. Dust is both an insulator and a restrictor of airflow. Using canned air regularly to blow dust out of the inside of the Mac, and to clean its fans, goes a long way to keeping it from overheating. Using a vacuum cleaner is not recommended - it's too easy for the nozzle to bang into something, and the airflow going into a plastic nozzle can create static electricity, which you do not want around any printed circuit board.
    Keep the machine itself adequately ventilated - it needs a reasonably unrestricted supply of fresh air. If you place the tower on the floor or under a desk, make sure there are several inches of free space between the case and any obstructions. Usually, keeping it on a desktop reduces the amout of dust it will ingest.
    In addition, whenever possible use external power for a device - this applies to firewire and USB devices.
    Hard drives generate a fair amount of heat. G4 desktop models are designed to accommodate up to four internal hard drives, though it is possible to install more than that. If you go beyond four internal drives in a G4, consider replacing the fans with ones with a larger capacity to handle the increased heat load.
    If you replace the CPU, be sure you follow the instructions with the new one re making sure the heat sink on the new processor is installed correctly.

  • I'm a school tech coordinator. Many computers and many iPads. How many Apple IDs can I have per device, and how many devices can have the same Apple ID? To make my life easier, I'd like 200 devices to all use the same Apple ID.

    I'm a school tech coordinator. I have many computers and many iPads. I apologize if there is a some place that has all the rules governing the use of Apple IDs. I looked, and I even tried to get the answers from multiple Apple rep's. I couldn't find the answers.
    How many Apple IDs can I have per device?
    I want to use the same computer to sync and backup many iOS devices. The iOS devices would be associated with different Apple IDs.
    I may load apps under a school Apple ID and have users load their own apps under thier own ID.
    How many devices can have the same Apple ID?
    Can I use the same Apple ID on all the computers in a lab?
    Can I use the same Apple ID on all iPads for a particular grade level?
    Are the rules different for iOS devices and computers?
    I know that there are limits on "authorize" and "de-authorize" and how frequently those things can be done.
    Recently I heard that for the life of an iOS device, it can only be associated with five Apple IDs. That is not good for a school giving iPads to students in a 1:1
    To make my life easier, I'd like 200 devices to all use the same Apple ID.

    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html
    It would be best to address your questions there, especially since this is a public forum, and over there you could post more private issues with this set-up. Not to mention, getting more official answers.

  • Is there a limit to how many times you can extend a WiFi Network?

    I assume there is a limit based on the number of IPs available but is there a limit to how many times a WiFi network can be extended or is there a limit to how many Airport Extremes can talk to each other?
    I know this probably not a concern of the average home user but if you wanted to deploy these in a large building or even a very large piece of property, what's the upper limit?
    I already have 3 Airport (n) routers and I was thinking of adding two more. Will i hit a physical limit or just a point of diminishing returns?

    Can you clerify by what you mean when you say "remotes" sorry for my ignorance. but just trying to understand.
    A remote WDS node is connected to a main or base WDS node wirelessly.
    A base WDS node is connected by wire to the interenet.
    A relay WDS node relays or passes the wireless signal from a base WDS node to a remote WDS node.
    Clients connect to either the base or remote nodes. A relay node can be configured to accept connections from clients as well.
    Also This reduction in half is this a limitation be design? Is this caused by the limit in channels or is there some sort or mechanism in place? just curious.
    Think about how the remote WDS node needs to communicate with both the base station and the wireless client at the same time, so the available bandwidth is effectively halved as half is used by the remote to connect with the client and the other half is used to connect with the base node.
    It's not quite the same as two wireless clients on an individual base station as they would rarely be using the full bandwidth at the same time.
    iFelix

  • HT204291 Is there a limit to how many AppeTVs I can stream to simultaneously?

    Is there a limit to how many AppeTVs I can stream to simultaneously?

    Stream what? If you mean airplay then you can only send 1 video stream, audio cannot be separated. Music can be sent to different airplay enabled speakers (including those connected to ATV) within iTunes or by using remote app.

  • TOC entries: is there a limit to how many links you can have to the same htm in TOC?

    TOC entries: is there a limit to how many links you can have to the same htm in TOC? I have an HTM that requires multiple links in the TOC. Now I can't compile a CHM. I have eliminated all other possible problems...

    Hmm, that would be a new one on me, but I see new things all the time and try to always keep an open mind.
    Okay, so one way past this might be to do the following.
    Create a snippet. Copy the content of the desired page and paste into the snippet.
    Create 30 different versions of the same topic by simply placing the Snippet into each topic. Then insert the different topics into the TOC.
    You should still be able to modify the content of the topic in the single place (the snippet) and by having discrete points from the TOC, there should be no issue and synchronization should work beautifully.
    Cheers... Rick

  • How many 7920 phones can be supported on one Cisco 1131AG access point?

    hi all,
    who knows that how many 7920 phones can be supported on one 1131ag AP? Thanks a lot...

    Hi Alomar,
    Hopefully this info will help;
    Number of 802.11b Phones per AP
    Before any discussion about network planning can take place, it helps to understand the basics of the overall network capacity.
    The following network capacity guidelines apply to sizing the Wireless IP Telephony network:
    No more than 7 concurrent G.711 calls per AP.
    No more than 8 concurrent G.729 calls per AP.
    Note These design recommendations assume that Voice Activity Detection (VAD) has been disabled on the Cisco 7920 Wireless IP Phones. Use of VAD on the Cisco 7920 phones can conserve bandwidth, but Cisco recommends that you disable VAD on all Cisco CallManager servers to provide better overall voice quality.
    In addition to determining how much bandwidth is needed for an 802.11b VoIP call, you must also consider overall radio contention for a particular RF channel. The general rule is that you should not deploy any more than 20 to 25 802.11b endpoints per AP. The more endpoints you add to an AP, the more you reduce the amount of overall bandwidth and potentially increase transmission delays.
    The maximum number of phones per AP depends on the calling patterns of individual users (based on Erlang ratios). Cisco recommends no more than 7 concurrent calls using G.711 or 8 concurrent calls using G.729. Beyond that number of calls, when excessive background data is present, the voice quality of all calls becomes unacceptable.
    From this doc;
    http://www.cisco.com/en/US/products/hw/phones/ps379/products_implementation_design_guide_chapter09186a00802a0a05.html
    Hope this helps!
    Rob
    Please remember to rate helpful posts.....

  • How many mails i can send at a time per day using APEX mail system?

    HI,
    I am working on application, when i have written a process to send mail, i have a project where i have to send mail at a time for all the email id's
    given list there are upto 5000 email id's where text body also include certain set of data from a report. thinking at a time 3000 its difficult i divided
    it region wise, but still each region have 2000 odd email id's. during testing when i run the process just 950 mails i could send then i got a error
    saying "ORA-20001: You have exceeded the maximum number of email messages per workspace. Please contact your administrator." so please
    can any one help me to know How many mails i can send at a time per day using APEX mail system?
    Thanks in advance
    Gowthami

    Hi jfosteroracle,
    You are getting the error may be the following reason,
    Check the following,
    Login as ADMIN and Goto -->Manage Instance-->Instance Settings--> Mail-->Maximum Emails per workspace
    Actually this number denotes the Number of mails can be sent per 24 hour for the workspace,It may exceeded.
    It may be the reason.
    Thank you.     
    Regards,
    Gurujothi
    Edited by: Gurujothi on Jun 27, 2012 5:54 AM

  • How many key fields can we have in a DSO?

    Hi,
    how many key fields can we have in a DSO.is it 16 or any number of key fields can be used? If only 16 are allowed pls let me know how to add more key fileds (my requirement is 21 keyfields) .
    Thanks in advance,
    Praveen

    Hi,
    Thanks for the reply. Pls let me know the procedure to include 5 more key fields because i have 21 keyfields which i have to use.
    Thanks&Regards
    Praveen

  • How many key fields can we maintained in dso or ods

    HI
    pls let me know how many key fields can we maintained in DSO or ODS.
    Thanks and Regards.
    ASIM.

    Hi,
    Key fields can only be 16 you cannot exceed this. but if you have more key fields, you can combine fields using a routine for a key field
    Max Data Fields - 749 data fields can be added in a DSO.
    Regards,
    Marasa.

  • How many lines we can print using Non-alv report list ?

    Hi Experts,
    How many lines we can print using Non-alv report list ?
    regards
    vishnu

    Hi,
    It depends on the page size according to the page size we can set the no. of lines as follows,
    REPORT  program_name   NO STANDARD PAGE HEADING
    LINE-SIZE 290
    LINE-COUNT 65.
    Hope it helps you,
    Regards,
    Abhijit G. Borkar

  • Does anyone know how many devices one can have on one apple ID?

    Does anyone know how many devices one can have on one apple ID?

    The names are for your benefit. The devices are identified by serial number in iTunes. iTunes knows which device is which no matter what you name the devices. It works the same way with iCloud. You can name all three devices Fred - and iTunes can tell them apart - but like I said, you want to give them different names for your benefit.

  • How many different computers can i sync my ipod to and transfur music from?

    how many different computers can i sync my ipod to and transfur music from? i am trying to sync my ipod to another laptop and add my music to that computer but i was wondering if there was a limit on how many computers you can do that with. thanks all.

    You can authorize up to five computers for your iTunes purchases.
    If manually managing your device you can add content from any library.
    If automactially syncing content is managed from one library.
    Purchased content can be transfered from a device into an authorised library, otherwise iTunes only transfers content to the device.
    tt2

  • HT1386 How many different computers can I sync my iPod with?  My laptop crashed and was completely wiped clean and this was the machine that my iPod synced with so I don't know if it will be counted as a "new" computer.

    How many different computers can I sync my iPod with?  My laptop crashed and was completely wiped clean and this was the machine that my iPod synced with so I don't know if it will be counted as a "new" computer when I sync my iPod.

    You can sync with onee at a time. Syncing to another will erase the current content.
    Copy everything from your backup copy of your old computer to your new one.

Maybe you are looking for

  • Data is lost when form is completed under Firefox or Chrome

    I have an interactive pdf, created with Acrobat X Professional, with user rights extended so that form data can be saved using Reader.  The intent is for users to complete an online form in their browser and be able to save the data to their local di

  • Setup Manager - Application Change Management Pack

    Hi All, This is Mugunthan, Development manager for iSetup and Setup Manager. I am happy to begin my note with the launch of Application Change Management Pack 3.1. For those who are not aware of Application Change Management Pack, it is a new product

  • How to switch central frequency fastly with labview and USRP?

    Hello everybody,          Recently I was making a frequency hopping receiver with labview and USRP N210 and SBX. The transmitter works on the 2.4G band, and it changes from one central frequency to another every 65536us. As I think, if I start receiv

  • PDFDocumentRuntimeException: Failed to UPDATEDATAINPDF

    Hi, I am getting this error please let me know solution of the error. Personnel Change Request      500   Internal Server Error   SAP NetWeaver Application Server 7.00/Java AS 7.00  Failed to process request. Please contact your system administrator.

  • Join two Connect By Prior Start With trees and return only common records?

    Oracle 10g Release 2 (10.2) I have two tables that have tree structured data. The results, when running the queries individually are correct, however I need to join tree one to tree two in order to obtain only the common records between them. -- Tree