How many Receiver determination in File to SOAP scenario

Hi,
I am trying a File -SOAP-File scenario, where file will be send to PI asynchronous. BPM is configured to receive the file and
call the web services and get the response (Synchronous call) .After that BPM send the file asynchronous to File via FTP .
It is basically asynchronous/ Synchronous bridge scenario.
To do this I have have configured the BPM & created 3 Communication channel . 1 sender (File) & 2 receivers ( SOAP & File)
But i got confused in Receiver determination. How many Receiver determinations do we require in this step? 2 or 3. If 3 how they will look like. I believe Interface determination is same as Receiver determination. I am suing Business System to send & recv the file.
Points will be rewarded for suitable answer.
Thanks

hi,
You require 3 receiver determinations.
one from File to BPM(XI)..
another from BPM to SOAP and other from SOAP to FILE.
This is exactly the same scenario.
RFC Scenario using BPM --Starter Kit
Thanks,
Vijaya

Similar Messages

How many receiever determination steps.

Hello Everybody!
This is the first project that i am implementing, So i need guidance from you all
I am implementing a scenario wherein:
1) Data is passed from R/3 to xi and then to a web server.
2) From webserver the updated data is sent back to xi.
3) A particular field is boolean checked in XI, if true the data is sent back to webserver.
4) and then again the updated data is sent back to r/3 via xi.
R/3 ---> XI ---> Web Server ---> XI -(If condition true)-> Web Server ---> XI ---> R/3
R/3 ---> XI ---> Web Server ---> XI -(If condition false)-> XI ---> R/3
I have thought of using RFC adapter then BPM and then soap adater.
BPM process is shown below:
Start > Receive (Async) > Send (Sync) > Send (Sync. This step only if boolean true) > Send (Async) > Stop.
Now could you guys pls advice me on how many Receiver determination steps,Sender aggrements, receiver aggrements and interface determination steps are required.
Also now that this implementation is for a product that would be released in the market, do i need to use business systems or business service as the sld may vary for company to company.
Any comments???

hi,
>>>>Now could you guys pls advice me on how many Receiver determination steps,Sender aggrements, receiver aggrements and interface determination steps are required.
you should not worry about that
just use integration directory wizard
for every connection like:
from anything -> BPM
and from BPM -> anything
and it will create all ID objects for you
this way you will be sure that they are created correctly
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Mailexample.sql how do you determine the file type?

I'm using the mailexample.sql which explains how to use the demo_mail wrapper package for utl_smtp. There's a procedure for attaching text files and a procedure for attaching binary files. I've got binary files to attach to email successfully.
How can I determine the file type so that I can use the attach_text procedure when attaching text files rather than the procedure for attaching binary files?
Sandy

Watch out! I think there is a bug in that code :-
bug with PL/SQL Sample - maildemo.sql
To answer your question - the usual way of determining a file type is to look for 'magic numbers' in the file that indicate its type. For example, Windows exe files often (always?) begin with the two letters 'MZ'. Zip files begin with 'PK'; Rar archives begin with 'Rar!'. Text files can begin with anything, and do not have any characteristic marker, but USASCII7 (which is what the format that routine is designed for - I think), is a characterset that only uses the first 7 bits of the byte. You could read the file, and if you find any bytes > 127, then you know it is not a USASCII7 file. I have seen various programs that 'sample' the first 64 or 256 bytes of a file instead of reading the whole file, and they usually get it right.
Hope this helps.
Takmeister

HT1222 how do i determine the file size of each download before i download it?

How do i determine the file size of a down load before i download it?

I have checked the update page and even checked more and can find no reference to file size. I'm using a hotspot and some of the downloads cause me to go over my limit and incur extra charges. I apperciate your help.

QOS File to SOAP scenario

I have a File to SOAP scenario which processes a file with many records and calls a webservice once per record.
The QOS of the sender File adapter is set to 'Exactly Once' but the SOAP messages have QOS 'Exactly Once In Order'.
I would like the SOAP messages to have QOS 'Exactly Once' to avoid messages going into 'Holding' status after an error occurs with a previous message.
Any suggestions greatfully received.
Thanks
Mark Briggs

Thanks for your suggestions. This scenario does not use BPM.
This is an asynchronous scenario as the sender is file based. The QOS of the File sender Adapter is set to 'Exactly Once'. I do not think it is possible to set the QOS of the receiver SOAP adapter. I understood that the QOS of the receiver was determined by the QOS of the sender.
The records in the source file are independent of each other and so I do not want subsequent messages to go into a holding status when a record is in error.
Is there any way to make the QOS of the receiver SOAP adapter 'Exactly Once'?

File to SOAP scenario question???

Hi,experts
let's take source system is A,target system is B.
I have a File to soap scenario using BPM,the scenario is send file request(from A) to PI,PI will be communicating target system(B) with soap(syn).After that, PI receives the soap response and send the response data to A.
Now the requirement is, we need to archive the file request msg(before sending to B) to a folder and archive the response msg(response from B) to a folder as well.how could it be achived?
any help will be much appreciated!
Thanks

Hello Rajesh_V2009 ,
I am trying to implement exactly the same pi scenario, but having some problems :
File -> file adapter -> ccBPM -> soap receiver adapter -> web service request -> web service response -> ccBPM -> output file adapter.
The web service that I call works file from wsnavigator. I have created all the design and configuration objects
needed for the scenario.
I place a file with following contents:
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Body>
<pns:GetSetNameWS xmlns:pns="urn:file2soap2fileWSVi">
<pns:name1>ajeet</pns:name1>
<pns:name2>phadnis</pns:name2>
</pns:GetSetNameWS>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
When I look at the process monitor I get this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error when determining the receiver: Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have no clue about this error. Can you help me with this ?
If yes I can send you more details, if you liked 
Hoping to get help from you,
Cheers,
Ajeet Phadnis

Error handling in File - XI - SOAP scenario without BPM

Hello!
We have a File -> XI -> SOAP scenario without BPM. The problem is that if the Web Service sends back an error XI tries to reprocess the same message again and again instead of taking the next one.
We do not want set the retry interval to NULL because most error cases are temporary connection problems and then also those messages would not automatically be reprocessed any more.
We also have to use BE instead of EO, otherwise the Web Service will not return a response. But we need the response to be sure that the processing was successful. The message volume in this scenario is quite high and we do not want to use BPM only for the error handling.
I know that from SP19 some additional adapter modules are available for async - sync scenarios without BPM. I tried to configure it like described in File - RFC - File without a BPM - Possible from SP 19. but it did not solve the problem. Does anybody have any other ideas? Thanks.
Regards, Tanja

Hi Tanja,
>>>The volume is 3000 messages/day on business days and 700 messages/day during weekends but the traffic will increase in the future
I think, you should check that out. It is assumedly only 2 days work to build a scenario:
IDoc -> BP
BP <-> SOAP/HTTP
BP -> IDoc (Acknowledgement)
In the process you need a condition branch, where you decide success or not. You need 2 Interface Mappings for filling the ALEAUD.
Just send 1000 IDocs to the Test-XI and look to performance monitoring at Runtime Workbench, to find out, how many message will be processed in one hour. Assumedly 3000 and more per day should be possible. The advantage would be to reduce number of systems (no file system) and messages (better monitoring) and using the standard (better maintenance).
>>>So you are suggesting I should use HTTP adapter and then add the SOAP header manually in a mapping?
Yes, build the SOAP envelop during the mapping. Most easy is to use XSL or, if your mapping is ready, an additionsal XSL. You can put the error into the Acknowledgement to see it in ERP transaction WE02.
Filling of ALEAUD fields:
E1ADHDR/MESTYP: original message type
E1ADHDR/E1STATE/DOCNUM: original IDoc number
E1ADHDR/E1STATE/STATUS: 68 in case of error, 53 in case of success
E1ADHDR/E1STATE/STATXT: Short description for R/3 user what has happend
I ve done such a scenario several times. That works without any problems.
Regards,
Udo

File name to be read in mapping - File to SOAP Scenario

Hi all,
its a file to soap scenario. i need to send the file name also to target system. how can i get the file name in the mapping? is there a way to read the header information in mapping?
Regards,
Rashmi

You need to check for Adapeter specific Message Attributes of your File adapter.Then write user defined function to set Dynamic_configuration. So that you can get the file name in the header(u can chk this in SXMB_MONI after implementing the UDF, it will create one section for dynamic_configuration.)
Manisha

Sync File to SOAP scenario

Hey guys
i m doing a Sycn FIle to SOAP scenario(i guess i need BPM for that,right?)
lemme know if my configuration is correct
For sender FIle:
DT_sender,MT_sender,MI_sender,AI_sender(async)
For SOAP
DT_soap,MT_soap,MI_soap,AI_soap(sync)
For Receiver file
DT_receiver,MT_receiver,MI_receiver,AI_receiver.
and BPM would be
start>>Receive>>Sync send>>send>>stop
and ofcourse i need to import the WSDL for the webservice.
is this all,or i need to do some other designing too?
thanx
ahmad

Ahmad,
The weblog says you are sending a request from R3 using RFC. Then it gives back you the response from the webservice.
So first you have two scenarios:
Request:
Source: No datatype needed because you are importing the RFC.
Target: For this you need the datatype. Just create the datatype what he has mentioned.
Response:
Source : Just copy and paste the xsd. You import as an external definiton.
Target: Since your RFC is a synchrounous you will have the response for it. That is your target.
Then after that you do message mappings for request and response and then the interface mapping.
You dont need to have BPM for this interface. So dont worry about BPM for this interface.
Then you complete all the steps given in his weblog2. Then test it out.
---Satish

File to Soap Scenario using UDF

Hi Guys
We have a requirement that said:
IF ShortDescription is not u201CNULLu201D then
map ShortDescription
ELSE IF ShortDescriptionLang with LanguageCode u201CENu201D is not NULL
map ShortDescriptionLang
So what I did is:
if( ShortDescription != "NULL")
map ShortDescription;
else if( (ShortDescriptionLang != "NULL" ) && ( LanguageCode == "EN") )
map ShortDescriptionLang;
But everytime when pressing f7 to check for errors I get thid:
C:/usr/sap/PI1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map0b27cd32dc2611df84e7000c2973cb67/source/com/sap/xi/tf/_MM_MATERIAL_TO_CATALOGUE_.java:441: '}' expected
Can someone suggest on how can I test this fucntionality cause one thing that I don't understand is the "map ShortDescription" and "map ShortDescriptionLang"
How do I put it on my if statement
Thanks,
Yonela

Hi All
On my FILE to SOAP Scenario I awant to map a field from my Target to get a Message ID on the moni like in the code below:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP","XHeaderName1");
String value = conf.get(key1);
return value;
My is like this:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP","Messageid");
String id = conf.get(key1);
return id;
But the when presing f7 I get error:
C:/usr/sap/#####/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map1fee8942e00c11df9d67000c2973cb67/source/com/sap/xi/tf/_MM_MDM_MATERIAL_TO_CATALOGUE_.java:591: cannot return a value from method whose result type is void return value; ^ 1 error
So is it possible for me to use statement like this:
("http://sap.com/xi/XI/System/SOAP","Messageid");
Thanks
Yonela

File to SOAP Scenario Using BPM

Hi,
I am doing File to SOAP scenario using BPM.
while doing Integration Process in IR, i got the following error message
"Expression of simple type xsd:string expected"
But i have given xsd:string in the correlation element as well as in Data types.
I dont know why it is getting the error.
could you anyone please help me to sort out?
Regards,
Sai Ch.

Hey,
Check in the correlation editor, where you define the condition.
Whether the data type of the XPath is string and whether it matches with the data type of the messages that you have selected.also make sure the type of the correlation variable is string.
regards,
Milan

How to receive acknowledgement from Vendor via SOAP adapter.

Hello Experts, my outbound scenerio is R3>PI->Vendor via the URL given by vendor. From PI i'm sending my POs via SOAP adapter and in the conversion parameters I choose the check box "Do not Use SOAP Envelope" My message reached the vendor. Now vendor sends back a functional acknowledgement indicating the message had been received and processed. Below is the entire XML file content.
<MessageAcknowledgment>
    <AckLocation>Medical</AckLocation>
    <AckRefNum>98712345</AckRefNum>
    <AckNote>200-Accepted</AckNote>
</MessageAcknowledgment>
Can anyone let me know how to receive the above message? What setup do i need to do?
Thanks,
Edited by: XISearch on Jan 10, 2011 3:05 PM

>>> Can anyone let me know how to receive the above message? What setup do i need to do?
Solution: You need to create a synchronous scenario.
Might be at R3 side proxy sender and vendor side Reciever Soap
Basically PROXY <------> SOAP
Map the proxy request message to soap(vendor) request message as REQUEST MAPPING
and
Map the SOAP (Vendor) response message to proxy response as RESPONSE MAPPING
and in the backend parse the response.
If you need more details, Please let us know.

How can you determine a file creation date and know if it's been altered since the creation date

I need to know how to determine a file creation date on an ipad. If someone creates a document/note on an ipad how can you tell when it was created and if it has been altered since?

Unless you are using a third party app that provides that functionality, in iOS the only thing youcan access is the last edit/save date and time, which is fairly evident in the user interface for documents and notes. Some apps that handle MS Office files may provide that, but ican't say first hand.

How to write won WSDL file for SOAP adapter ?

Hi experts
Can any one expalin me how to write WSDL file for SOAP adapter ?
What and all things i need to know ? i have no idea on this....
I got the business but to WSDL ...i am very new to this
Adv...thanks
Rakesh

HI,
Please see the below links,
Consuming XI Web Services using Web Dynpro Part II-/people/riyaz.sayyad/blog/2006/05/08/consuming-xi-web-services-using-web-dynpro-150-part-ii
Consuming XI Web Services using Web Dynpro Part I -/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0d7349b6-0901-0010-ddbe-ec43178a61ff
/people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client
/people/kevin.liu/blog/2006/04/12/wsdl-11-binding-extension-for-soap-12
Regards
Chilla..

How enhanced receiver determination works..?

hi all,
In enhanced receiver determination Interface mapping(which has java mapping) I have also included logic to make some change in content of input file and dynamic configuration for output file name. My input and output are flat files. So I m using dummy structure. In interface determination i m not referring any Interface mapping.
Receiver determination is working properly But neither dynamic file name nor the changes in content of file are reflecting in out put file.
Is it mandatory to use separate mapping in interface determination to change the content of file and dynamic file name?
Thanks
Jai
Edited by: Jaideep Baid on May 29, 2010 6:27 PM

Is it mandatory to use separate mapping in interface determination to change the content of file and dynamic file name?
The mapping used to in receiver Determination is to decide the Receiver.....the mapping used in Interface Determination is to create the target structure....both are to be developed and used separately (one in Receiver Determination and other in Interface Determination respectively)....this wiki gives you an example:
http://wiki.sdn.sap.com/wiki/display/SI/StepbyStepguidetoExplainEnhancedReceiver+Determination
Regards,
Abhishek.

How many Receiver determination in File to SOAP scenario

Similar Messages

Maybe you are looking for