How Many Records a Desktop report can display

Hi All,
Just wanted to ask a basic question. Is there any limitation that a discoverer desktop report can display only a certain number records.
My report is completed with error message saying fetched maximum number of records, Report may not contain all records.
Thank you,

madhu
go to tools --> options --> query governor tab and deselect the "limit retreived query data to:"
--boys

Similar Messages

How many records does JDBC adapter can obtain in one polling?

Hello everybody,
I need to do an interface between legacy system and SAP ECC, the legacy systems have a DB so i use the jdbc adapter (sender) and receive the information to SAP ECC with proxy, so i need to activate the polling option from my jdbc adapter working as a sender, i read a table with lot of records, and i need to know how many records does jdbc adapter support when the polling is executed, because is necessary read all records from the table and change the status of the processed field.
Is possible to get all the records from that table in one polling interval (50,000 records aprox)?, or i need to do the polling by blocks of records until finish all records from the table?, the second option, i dont have idea how can i do it.
Regards,
Vicman

Hi again!,
i still working on that, but i have a question, is possible to handle Store Procedure in jdbc adapter?? is supported?, like PL SQL, because i was working in the next query but i don't know if it works and where do i need to locate the query in the Query SQL Statement or in Update SQL Statement field or both? but how?.
DECLARE c_cursor CURSOR FOR
SELECT * FROM tablename
WHERE processed=0
OPEN c_cursor
   FETCH NEXT FROM c_cursor
WHILE @@FETCH_STATUS = 0
BEGIN
   update tablename set processed=1
   FETCH NEXT FROM c_cursor
END
CLOSE c_cursor
DEALLOCATE c_cursor
Regards,

How can I set limitations on how many records a report can return

I have a report on the web using Oracle Reports builder and I have the client enter in date parameters for the report that they want.
Well with date ranges for different clients a different number of records are returned. Because of time it can take the report to return I want to limit the number of records that report can return.
How can I go about doing that? I don't want to limit with date parameters because date won't really work for me. I need to limit on how many records can be returned. If it exceeds 10,000 records I want the client to refine the date range of schedule the report to run later. Meaning we will run that report. So I would have two check boxes if the count was over 10,000 do you want to define your date or schedule the job to run later.
Can any one help me with this? How would I go about this?

To know if the report is going to return more than 10,000 records, you first have to run the query with a 'select count(1) from ... where ...' (with the same from and where clauses as you normal query). Since this takes about the same time as runnng your report, I wonder if you really gain anything (although formatting may take some time too).
You may simplify the select count(1) query by omitting all the lookup tables that are only needed for formatting. That way your query may run a lot faster. You can put this in your after parameter form trigger.

How to keep track of how many records to display in a page.

Hi All:
I am using Weblogic 9.2, Web Services Client, and Struts.
I have a java client in struts that calls a web services.
The "ID" field contains a Java integer.
The "First_Name" is a Java String.
The "Effective_Date" field is a Java date field.
The web service returns an arrayList of a class called Result.
Code for Result.java:
>
public class Result
int id;
String first_Name;
Date effective_Date;
public int getId
return id;
public void setId(int id)
this.id=id;
public String getFirst_Name()
return first_Name;
public void setFirst_Name(String first_Name)
this.first_Name = first_Name;
public Date getEffective_Date()
return effective_Date;
public void setEffective_Date(Date effective_Date)
this.effective_Date=effective_Date;
From the arrayList, I displayed the result as the following:
ID FIRST_NAME EFFECTIVE_DATE
3 John 9/10/2007
2 Andrew 1/11/2006
5 Peter 3/4/2006
The "ID" header is a link.
The "First Name" header is a link.
The "EFFECTIVE_Date" is a link.
If I clicked on the link "ID", the first time, it will sort the rows in ascending
order like the following:
ID FIRST_NAME EFFECTIVE_DATE
2 Andrew 1/11/2006
3 John 9/10/2007
5 Peter 3/4/2006
If I clicked on the link "ID", the second time, it will sort the rows in descending
order like the following:
ID FIRST_NAME EFFECTIVE_DATE
5 Peter 3/4/2006
3 John 9/10/2007
2 Andrew 1/11/2006
If I clicked on the "First_Name" field the first time, it will sort the rows in
desceding order.
If I clicked on the "First_Name" field the second time, it will sort the rows in
ascending order.
This applies the same for the "EFFECTIVE_DATE".
If the arrayList returns 80 records of class Results.java.
I needed to displayed only the first 50 records for the first page and 30 records for the second page.
How do I keep track of that so that when I am in the second page, I know to display only record 51 to 80?
If I have a arrayList that returns 120 records of class Results.java.
In the first page, it displayed only 50 records.
In the second page, it displayed only 50 records.
In the third page, it displayed only 20 records.
Assuming I am able to sort the rows by ID, FirstName and Effective_Date by using Results.java implementing the
Java Comparator class. Is it still possible to keep track of how many records displayed in the first page and how many records should
be dispalyed in the second page?
Any hint would be greatly appreciate.
Yours,
Frustrated.

Hi,
Access the table through SM30. It comes blank as standard. Click "New Entries" and make entries for changes to be tracked. For example, whenever an org. unit changes 002 and 003 relationship, you will make entries like:
01 O 1001 B002 Activate box checked
01 O 1001 B003 Activate box checked
Here, 01 is your active plan version, O is org. unit, 1001 is infotype and B002 and B003 are the subtypes. You can also use * for infotype and subtype which means every change will be logged.
If you then run the report RHCDOC_DISPLAY through SA38, it will pick up all the changes pertaining to B002 and B003 relationship for org. units (in the above example).
Similarly, you can set up this table for other object types.
For more information, follow SPRO>Personnel Management>OM>Basic Settings>Activate change documents and go through the documentation for that node. Also, read up the documentation for the report.
Hope this helps.
Donnie

Report execute time nd how many records will be returned before hitting the "run" option?

Post Author: Prasad15
CA Forum: WebIntelligence Reporting
Is there any way to know how long the report executes and how many records will be returned before hitting the "run" option?
Regards
Prasad

To know if the report is going to return more than 10,000 records, you first have to run the query with a 'select count(1) from ... where ...' (with the same from and where clauses as you normal query). Since this takes about the same time as runnng your report, I wonder if you really gain anything (although formatting may take some time too).
You may simplify the select count(1) query by omitting all the lookup tables that are only needed for formatting. That way your query may run a lot faster. You can put this in your after parameter form trigger.

How to know how many records is returned by the query in report

Hi
i want to know how many records has been returned by a sql statement in a report.
can any one help me to solve this problem.
santosh.

you need to create a summary column with count function for a column in your select query. then u can print that formula column to know the no of rows selected in a query for a report

Is there any limit on how many records a cursor can hold?

Hi Everyone,
This is Amit here. I want to know whether there is any limit on how many records a cursor can hold.
I have a program in which i am creating a cursor and passing it to another procedure as an input parameter. But the count of cursor query is more than 15 Lakhs. The program is running forever.
Just wanted to know whether the huge data is the problem.
Thanks ....
Regards,
Amit

user13079404 wrote:
Just wanted to know whether the huge data is the problem.What do you think? How long does your code typically need to wait for the data to leave the magnetic platter of the harddisk, travel across wires and into the memory buffer of your application - for a single row?
Now multiply that waiting for I/O time with a million - for a million rows. Or by a billion, for a billion rows.
Is "+huge data+" a problem? Not really - it simple needs more work to get that amount of data from disk. More work means slower performance. It is that simple.
Which is why the row-by-row approach used by many developers is wrong. You do not pull a million rows from disk and process it in PL/SQL or Java or .Net. Heck, you do not even pull 10,000 rows like that.
The correct approach is to think data sets and use SQL to process that for you - and only return the bare minimum of data to the application layer. Maximize SQL. Minimize PL/SQL and Java and .Net.

Can any body tell me how many records can a db hold in a minute

can any body tell me how many records can a db hold in a minute

user644700 wrote:
can any body tell me how many records can a db hold in a minuteI would hope not since it will depend on X number of factors where X is a very large number.
Did you have anything specific in mind (version, hardware, etc...)? I assume you mean load and not hold?

Find out how many records are updated.

Hello,
I am executing a Update Statement in a loop from a JSP page this is working good.
Suppose if there are 10 records and I update 4 records, it gets updated fine.
What I now need is to find out how many records have been updated. How can I know this?
Thanks

statement.executeUpdate() returns the number of records updated.
Sai Pullabhotla

How do we track how many records INSERT/UPDATE/DELETE per day

Hi All,
We have around 150 tables in database. so many members/persons can access these table and every one can have rights to do INSERT,DELETE,UPDATE the records. I wanted to know How many records are UPDATED,INSERTED,DELETED for a day. is it possible to find out.
I have some questions please clarify the doubts.
1> If we create any table, this table gets store in All_OBJECTS/USER_OBJECTS, tabs/tab/user_tables...... we can find out table name,columns what tables were created in database.
2> if we enter records/ delete records / update records in a table. we can able to find corresponding table. Apart from corresponding table . is there any way to find out records.
above i said that if i create any table it will store in objects table.

Schedule a periodic DBMS_STATS.FLUSH_DATABASE_MONITORING_INFO and query USER_TAB_MODIFICATIONS. This view shows DML activity against each table and is updated when database monitoring info is flushed. The flush is automatic but if you need control over the frequency of updates, you can explicitly call the FLUSH.
In 9i you have to "ALTER TABLE table_name MONITORING ;" before you can use this method.
In 10g, this is enabled by default unless STATISTICS_LEVEL is set to BASIC.
See http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/statviews_4465.htm#sthref2375
and
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/tables.htm#ADMIN01508
Another useful view is V$SEGMENT_STATISTICS (or the faster view V$SEGSTAT) which provides information in the same manner as in the V$SYSTAT / V$SESSTAT views.
Hemant K Chitale
http://hemantoracledba.blogspot.com

At first record of innerloop , want to know how many records exists

How can I know the number of records in INTBSEG for each record of int_maintable before running the loop for that where condition of INTBSEG.
Please see below:
LOOP AT int_maintable.
Loop at INTBSEG where bukrs = int_maintable-bukrs
                                 AND belnr = int_maintable-belnr
                                 AND gjahr = int_maintable-gjahr.
( I want to know at the point of sy-tabix of INTBSEG = 1
how many records exits in INTBSEG ...
      for this   where bukrs = int_maintable-bukrs
                                 AND belnr = int_maintable-belnr
                                 AND gjahr = int_maintable-gjahr.)
I want to know how many records exits in INTBSEG , for the first record itself of INTBSEG)
Endloop.
ENDLOOP.

Hi,
Try this..
DATA: INTBSEG_TMP LIKE INTBSEG OCCURS 0 WITH HEADER LINE.
DATA: V_LINES TYPE SYTFILL.
LOOP AT int_maintable.
CLEAR: V_LINES.
INTBSEG_TMP[] = INTBSEG[].
DELETE INTBSEG_TMP WHERE where bukrs <> int_maintable-bukrs
AND belnr <> int_maintable-belnr
AND gjahr <> int_maintable-gjahr.
DESCRIBE TABLE INTBSEG_TMP.
V_LINES = SY-TFILL.
Loop at INTBSEG where bukrs = int_maintable-bukrs
AND belnr = int_maintable-belnr
AND gjahr = int_maintable-gjahr.
<b>* Use the field V_LINES to get the number of rows for that combination..</b>
Endloop.
Endloop.
Thanks,
Naren

How many partitions and operating systems can you line up in BootCamp?

A quick question, hopefully with a quick answer.
How many partitions and operating systems can you line up in BootCamp?
Are we limited to just 2, or can we have more?
Say, for example, Mac, Win XP, Win Vista and Linux maybe?
Thanks in advance.

VPC does not run on Intel Macs. If you wish to use virtualization on an Intel Mac see this:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not yet fully developed for the Mac - some features are not yet implemented - but it does work otherwise.
6. Last is Q. Q is a freeware emulator that is compatible with Intel Macs. It is much slower than the virtualization software, Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion.
Boot Camp is only available with Leopard. The Boot Camp Beta that was used with Tiger has expired and is no longer available for use. So contrary to the other poster's comment, Boot Camp isn't truly "free." You must purchase Leopard to get it.
You can upgrade XP to Vista without having to make any changes to the Boot Camp partition. Vista can either perform an upgrade install or erase the Windows volume before installing Vista. You don't need to do anything to change the partition via Boot Camp. However, if you need to enlarge the partition, then the only way that can be done is to first use Boot Camp to remove the partition. Then use Boot Camp to make a new, larger partition. All data from the Windows partition will be lost.

How many records updated

How can I find out how many records have been updated by an update statement and how many remain to be updated, while the statement is still in progress?

For updated ( inserted or deleted ) rows :*SQL%ROWCOUNT*
DECLARE
         v_rows_processed integer := 0;
        BEGIN
            UPDATE sample
               SET testno = 1;
             WHERE test   = 'PL/SQL';
            v_rows_processed := SQL%ROWCOUNT;
            dbms_output.enable;
            dbms_output.put_line('There were '||v_rows_processed||' rows updated');
            IF v_rows_processed := 0
            THEN
                /* Insert Statement */
            END IF;
         END sample;.Edited by: Salim Chelabi on 2009-01-09 09:25

How many RE1000, range expander's can i use ?

Hi,
How many RE1000, range expander's can i use ?
Our home is constructed of a Basement, first floor and second floor.
Each floor Area is120 Square foot = 385 Square meter
*Each floor is 115 foot in length a, 37 foot in width. And 10 foot in height.
Is it enough to buy the following product to cover the building?
One Cisco Linksys ER4200
Two Cisco Linksys RE1000 (Wireless-N RangeExtender/Bridge).
Looking forward for your support.
Beat regards,
Asad

rajansarc wrote:
Can anyone help me to setup the RE1000 as the BRIDGE using built-in Ethernet port?
I have the WiFi setup (DLink WiFi Router) in my Ground floor.
In the second floor I have setup RE1000 and can extend the WiFi signal from DLink WiFi Router in the ground floor.
If I connect my desktop computer through the built-in Ethernet port (With Wire) of RE1000 (second floor), I could connect only the Extender (RE1000), But I could not connect the computers available in the ground floor(connected in DLink WiFi Router) from the second floor.
How to setup Ethernet Bridge?
I also find the specification like this at http://www.youtube.com/watch?v=e45VyoqOI5k
"Includes a built-in Fast Ethernet (10/100 Mbps) port, which works as a wireless bridge to instantly connect any wired Ethernet device to your network."
Kindly help me.
To set it as bridged, you can just setup the wireless settings on it (the same w/ your router) and connect it to a device that you want to connect it with.

How many 3440 x 1440 monitors can you connect to the latest MacPro?

How many 3440 x 1440 monitors can you connect to the latest MacPro?

Apple is not clean in:
Mac Pro (Late 2013): Using multiple displays - Apple Support
It includes
Can I connect more than 2 DVI or HDMI displays?
Mac Pro supports a total of two DVI or HDMI displays when connected via the built-in HDMI port or using the Apple Mini DisplayPort to DVI adapter. To connect additional DVI displays, use an active DVI adaptersuch as the Apple Mini DisplayPort to Dual-Link DVI adapter. You can connect up to six active adapter DVI displays. This requires a powered USB hub since Mac Pro offers four USB ports and you will need six to connect them all.
However, that article says:
Six Apple Thunderbolt Displays (27-inch), Apple LED Cinema Displays (27-inch), or third-party Mini DisplayPort displays.
So it appears you can with active dual-link DVI adopter or monitors with a display/min displayport connection.

How Many Records a Desktop report can display

Similar Messages

Maybe you are looking for