How many responses can i generate for an unpaid form?

How many responses can i generate for an unpaid form?

Free accounts allow you to collect 50 responses before you have to export to make room for more.
Andrew

Similar Messages

  • How many devices can you use for your itunes account?

    how many devices can you use for your itunes account?

    PT wrote:
    Macistotle wrote:
    Unless you have DRM still haunting your tunes ... Then you can only use those songs on 5 devices. Otherwise, connect as many as you like (as stated above).
    No, you can sync your DRM tracks to an unlimited number of iPods (but only authorized to play on 5 different computers/user accounts)
    Patrick
    So I can sync two iPods to my iTunes account and sync the same digital copy movies that come with some o' my DVDs to both ipods? Do movies make a difference really, DRM-Wise? Thanks in advance.

  • How many implimentations can be done for a single BADI definition?

    How many implimentations can be done for a single BADI definition?
    Is there any restriction to impliment a single BADI definition?
    Plz answer with proper explanation....
    Thank you in advance
    REgards,
    Chaitanya

    hi Krishna Chaitanya,
    In a badi if the "Multiple Use" Checkbox is checked then You can have any number of Implementations for the BADI
    Say I have defined a BADI "BADI1"
    and I have 3 implementations
    IMP1
    IMP2
    IMP3
    The order of execution will be IMP1, IMP2 and IMP3
    In a badi if the  "Multiple Use" Checkbox is not checked then You can have ONLY ONE  Implementation for the BADI
    Say I have defined a BADI "BADI1"
    and I have 3 implementations
    IMP1
    IMP2
    IMP3
    Only one Implementation can be active at a time and only that will get executed
    Hope this helps a bit
    Reward if Useful
    Cheers
    Kripa Rangachari.

  • How many devices can i use for one apple-id

    Hi,
    My question is how many devices i can use for one apple-id.
    And where am i going to find the answer?
    Thanks,
    Vermeulen Francis

    You may read this discussion: https://discussions.apple.com/thread/3695326?start=0&tstart=0.

  • How many times can I try for restriction passcode in ipad

    HI
       I have forgotten restriction passcode and have already tried 12 times. Now it allows me to attempt after every 1 time. Though I have forgotten my password but I have a finite set of passwords. I am sure I will be able to crack after some 15/20 more times. Now do I stand a chance of my IPAD device permanently disabled after a certain no of times. I am ok with trying after every 1 hour as many times as possible but dont want to enter into a scenario where my device is permanantly locked. I dont have an itunes back up also so restoring from itunes is not there. Can I change the time and go on fooling the system?
    Regards
    S Choudhury

    If you are talking about Parental Control type of restrictions on the iPad, I believe that to be entirely iOS software level. You have 6 attempts before it locks you out for a minute. It then increases the locked-out time after further failed attempts. Since you have two failed attempts, it should let you have four more without consequence, which, if one goes through, all is well, if not, you will be locked out, before you can do a 7th attempt for 1 minute - to start with.If you fail the 7th time, it will increase the time to 5 minutes.

  • How many iDevices can you use for the same apple id?

    Id just like to know for future refence if i get an iMac etc.

    As many as you can afford...
    You can load protected content on up to five computers. Those computers can load content onto any device. You can select up to ten computers and iOS devices to recieve automatic downloads of your purchases.
    tt2

  • How many apps can you have for sale with a CC Complete membership? (Not Pro or Enterprise)

    I have the CC complete membership (£46 p/m) I was under the impression I could only have 1 app for sale on the Apple store with this. But I've re-read the guidelines and it says I can have unlimited apps. I've been working on an ipad app, which has ended up exceeding the 100mb limit (I think this limit is new, too) But my app could be divided up logically into 2 or 3 apps for individual publication, so long as each has the $99 fee paid. Do my conclusions sound right, or have I missed something?

    >for sale on the Apple store
    This is Adobe... I think you need to ask Apple about their store policies

  • How many devices can I authorize for an account?

    I have two machines authorized and I want to add a third, it will not let me, why?

    The limit is 5. Perhaps you've lost authorizations when restoring previous computers. You can deauthorize all, then authorize the computers that you want to use.
    tt2

  • How many tasks can I have in NI-DAQmx system?

    I am working out of the office this week - please send your response to [email protected] as well as my normal email [email protected].
    I am designing a new test platform that will run on C# (because we like object oriented text based programming and because the IDE is free).  For hardware we'll use your PXI modules (because your hardware is ultra-reliable).  I'm starting with the following PXI modules 6259, 4072, 6509, 2575, and 2569, but we made add other modules later as future requirements demand.  I am doing the system software architecture now.  I've done some dabbling with Ni_daqmx, and I loathe "tasks" and "channels", but am determined to make them work.
    The difficulty I'm having revolves around the overhead with setting up tasks and channels and with the concept of tasks and channels.  Help hasn't helped much.  Tasks seem to work great if you intend to always collect the same large amount of data from many sources and always will do it in exactly the same way. 
    We want something much more akin to random access memory.  We'll have UUTs of different kinds coming on and off at random times.  Sometimes a test will need a simple DC voltage, and other times another test will need 2 seconds worth of data at 1MS/s.   It can cost around 150msec to make that change (stop the current task, creat another one, configure anohter channel, start up a new task, blah, blah, task this, channle that - for the life of me I can't understand what this damn taks concept does for me but make matters more complicated and bog down my system).
    I can just barely glean from the help that I can have only one analog input task at once, but I can have sevferal taks of several different kinds running at the same time ( a digital output task and another task for digital input, and another task for analong input, etc.) .  It does seem that I can set realys without having to put them into a channel and a task (Thank goodness for that - I just wanna turn on a relay I have no idea what a relay "channel" might be.)
    In the PXI system I described above I'll have two devices that are analog input devices, the DMM and the Daq.  Even with two devices, can I only have one analog input task running?  Does that mean I've got to waste 150msec just to switch from the DMM to the Daq? (Do you understand my frustration with "tasks"? - I should be able to say "read DMM" and turn around and say "read Daq channel 0" without having to jump thru task and channle hoops and waste a bunch of time doing it).
    I'll also have Daq digital IO and two 6509 digital io modules.  Do I have to cram all of that into some "task" concept too?  The Daq card has got many other kinds of wonderful capability (frequency measurement, counters, analog output).  How many tasks can I have for that stuff?  On the DMM card I can measure capacitance amoung other things.  Will I have a capacitance task?  The idea of a "capacitance task" hurts my head.
    Golly I hate tasks.  Please help.
    I am working out of the office this week - please send your response to [email protected] as well as my normal email [email protected].
    Dave

    Dave,
    Thanks for posting to the NI Forums.
    For the good of the community we like to keep conversations that start of the forums on the forums rather than moving to email.  If you want to move to email support I recommend contacting NI through the email route.
    I will answer your questions here.  If you need more direct contact please feel free to contact us through [email protected].
    For some the concept of tasks may seem daunting, however, for many applications it makes life a lot more simple.  A task at a very fundamental level is simply a collection of channels with a single type (AI, DI, DO, etc.)  and a single timing configuration (sampling rate, continuous vs. finite, etc.).  It is a way to organize configuration data.  
    The concept of a task is an abstraction like OO programming.  Like OO programming it may take some time to understand but can be a time saver in the end.  Also like OO programming it does add some initial programming overhead.  It is much more simple to simply type a printf statement in C than to have to create a bunch of classes just to output text to the screen. You can accomplish the same thing not using OO programming, but in the end OO programming is extremely useful, because it groups useful information and methods together in one place.
    With very simple applications OO programming sometimes does not make sense.  But as a program gets more and more complex OO programming becomes more and more useful.  It takes some learning but it is worth it.
    I believe the concept of a task does the same thing.  It does not change the actual functionality of the device or add excessive overhead.  It is just an abstraction that pulls configuration data about a specific "task" and methods the task can perform into a single logical place.
    Unlike the entirely abstract concept of an Object, a Task is run on a physical device and therefore has physical limitations.  You can create multiple tasks of the same type, but you can only run a one timed task of each type on a single board at a time.  In other words you can have multiple AI tasks running at the same time but they need to run on different boards or only one can be timed (have a rate).  You can also have multiple timed AI tasks configured for a single board but only one can actually be running at a time.
    The reason you can only have a single timed task running at a time is because the M-Series boards (and many other boards as well) have a single timing engine for each type of acquisition or generation.  There is a single timing engine for AI, one for AO, and so forth.  You cannot have channel 1 running at 1 MS/s and another running at 50 kS/s.
    However, tasks can exist even when they are not being actively run.  You can create all the tasks you need at the beginning of your program and simply start and stop them as you need.  After the task is stopped you do not need to clear the task until the end of your program.  You can further increase performance by moving the Task into the latest state possible without actually starting the task.  This can be done by calling myTask.Control(TaskAction.Action).  The Task states are further explained in the NI-DAQmx Help Manual.
    The concept of a  task will need to be used with any device that is being programmed using NI-DAQmx.  The 6259 and 6509 will need to be programmed using DAQmx.  With the 2575 and 2569 you have the choice of either using the NI-DAQmx API or the NI-SWITCH API.  The SWITCH API does not use the concept of tasks.  For the 4072 you will need to use the NI-DMM API.  This API also does not use the concept of tasks.
    Hopefully this information is helpful.  Let me know if you have any additional questions or concerns.
    Regards,
    Neil S.
    Applications Engineer
    National Instruments

  • How many iPads can be synced to a single iTunes/ single iTunes account?

    If I purchase an application from iTunes on my computer, using a single iTunes store account, how many iPads can be synced for that applications?
    Thanks

    There is no device limit for the number of iPods/iPhones/iPads that can be synced with the same iTunes library and iTunes account on the same computer.

  • How many Keywords can I use

    Hello A question about Keywords.
    How many keywords can  I use for each page?
    And is there a loot for HTML <head> optimalization?
    Ton

    Hi,
    Take a look to this Article,
    http://forums.adobe.com/message/6042953#6042953

  • How come we can no longer see how many responses were made to a question?

    I see that you have changed around the DE a little again. How come we can no longer see how many responses have been made to each question? I found that to be useful when looking through the posts.
    Brian

    Hi Brian,
    Thank you for the feedback that you found the list of the number of responses to a question to be useful. This feature was unintentially not included as part of the site update on January 19th, and I am working with the site developers to see if we can get it reinstated on a future update.
    If you have additional feedback, please feel free to post them here or to e-mail them to me.
    Best Regards,
    Wilbur Shen
    Web Support and Operations
    National Instruments
    [email protected]

  • How many times can a team member install Creative Cloud for teams ?

    How many times can a team member install Creative Cloud for teams ?
    Is it possible for one team member to install it for example on a portable mac and a desktop pc at the same time?

    From the Creative Cloud FAQ at https://www.adobe.com/products/creativecloud/faq.html under the Purchasing and getting started section:
    On how many computers can I install the software I download from Creative Cloud?
    You can install the desktop applications available in Creative Cloud on your primary computer and one backup computer, as long as they are not running at the same time. You will have access to both the Mac OS and Windows versions, so if you have a Mac at home and a PC at work, for instance, you can install your applications on both. See the product license agreements page for more information.

  • How many iPads can you setup on one iTunes account for a school?

    How many iPads can you setup on one iTunes account for a school?
    What is the best system?  We have 30 iPads.

    That would be fine.

  • HT4480 I have redemption codes for FCP from my university - how many machines can I install on?

    I have redemption codes for FCP from my university - how many machines can I install on?

    Do you have these codes because this will be your app? Or is this a "loan" from the school to install on your machine? Do you use your own Apple ID to redeem the code and install the app?
    If it is your app, then you may install it on as many Macs as you own or have in your control.

Maybe you are looking for