How many rows and columns?

How big can spreadsheets be in Numbers?
I've looked at the online info and haven't seen the number or rows or columns a spreadsheet can be.
Thx

Excel is definitely not the best way for analyzing microarray data, but it works to some extent, and we do use it for a quick peek into the data. This type of data is a good proof of principle to see what Numbers can do, compared to the competition (Excel and Neoffice). So far, the competition is faring better in the large data file category.

Similar Messages

How to find out How many rows and coloumn exists in the Excel sheet

hai gurus,
present iam uploading data from presentation server to application server. when i use gui_upload the data is coming non-readable format.
so i used alsm_excel_to_int fm for that . but the problem is user can give any type of excel so... i need to know how many rows and coloumn s existed in that Excel
so is there any possiblity to get those values(Total rows and total coloumns).
plz help me..
if any one answered , appreciate with reward points,
thanks&regards,
Venu.T

see you have to come into an agreement with other system before starting development..
Please dont do unnecessary coding for impractical things ..you may solve this but this is not good way of working in eRP packages..
Al least u can get final list of all Columns and which can be blank or non blank like this
then u can do coding for this scenerio
regards...
Message was edited by:
Madan Gopal Sharma

How to find out How many rows and coloumn exists in the Excel sheet at run

hai gurus,
iam uploading excel to application sever,. when i used gui_upload the data is non-readable. so.. i used alsm_excel_to_int fm .but the problem is user can upload any type of Excel to Application so i need to know the total no of rows and coloum at runtime .is there any possiblity to find out those values.
Plz help me.
if any one answered , rewards points,
Thanks &Regards,
Venu.T

Hi kiran,
i u case better to upload the data first to application server than u can run the bdc program that will helps u
try these T-code for uploading data from prsentation server to application
CG3Y and CG3Z this will helps.
reward is usefull.
thanks.
patil.

Maximum number of rows and columns in data form

Hi,
I wanted to know if there is a limitation to the number of rows and columns that can be displayed in a data form, in Hyperion planning 11.1.2.1 ?
And what would be the most appropriate number of rows and columns to be included for optimum performance.
Thanks.

Hi,
While its a fun fact to determine how much one can stuff into a web form, the reality is: how much can a user reasonably consume in a web form?
And what would be the most appropriate number of rows and columns to be included for optimum performance
You will find that the answer to this is by "what design makes a web form most usable?" And no, the users don't really know what they want from a design perspective, they see it in their head, but usually what they ask for is something that would look entirely different (huge).
The next thing to think about is the use of member selection functions in the page axis. IDescendants(Entity) in a dropdown could cause issues just as easily as too many rows - and again make the drop down unusable for a user.
If your question is a bit more technical, then consider this (somewhat oversimplified): Web forms are constructed by a process on the server. Objects are created based on the form's definition and used by the process that builds the form. The process uses Cartesian looping (lots of iterations) to construct the form cell by cell, starting at the top left and finishing up in the bottom right. If the form has a million cells on it, then the loop and all the code within it runs a million times. The capability of the server has a lot to do with how well it can handle this request, and how many it can handle at one time.
The result of this is gobs of HTML and JavaScript. All of this has to be sent over a network to the requesting client. The client starts receiving the web page code and has to render it in the browser and run the JavaScript. The ability to do this is limited by the browser, the OS, and the hardware that the client is running on.
And that's just rendering the page for use.
Now it has to be interacted with on the client machine, and changes parsed, packaged, and sent back to the server.
So the technical answer is, there can be many limitations to how many rows and columns a data form can have - none of which can truly be anticipated by anyone. This is why I put the part about usability first in this post.
Regards,
Robb Salzmann

Web Form :Number of rows and columns

Hi All,
I have a web form with many rows and columns . Is it possible for a user to view only a limited rows in the form ? Not using Adhoc/Analyze option . since there are formula rows which wont appear in Analyze grid.
The user want to see only 5 to 10 random rows in the form ? How to do this ?
Please help.

I remember an option in 11.1 which allows users to dynamically add rows and I cannot find that in 11.1.2.2
I think the user will have to always update the user variable to what he want to see.
Regards
Celvin
http://www.orahyplabs.com
http://docs.oracle.com/cd/E17236_01/epm.1112/planning_admin_11122300/frameset.htm?launch.html

Lock rows and columns header in a table view report. It is possible?

hi,
I have a Dashboard that displays a report in "Table View" with many rows and columns.
Is it possible to set a lock on the rows and columns like Excel?
This would have blocked such headers that contain attributes and measures and to browse the report (eg with a scroll bar) had always viewed the headers.
Can you help me?
Thanks

hi,
please go through this discussion
Re: SCROLL BAR to FREZZ HEADERS
thanks,
saichand.v

Editing rows and columns in alv reports in webdynpro abap

how edit row and columns in webdynpro abap ?
can i add colors to salv repotrs for below and above range of values how ?
if possible send source code for it.............

hi
check out this link for editing the columns of ALV
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0155eb5-b6ce-2b10-3195-d9704982d69b
check out for this thread as well for coloring ALV
Coloring of selected table cells: Ideas wanted
regards,
amit

How to know how many rows including headers and footers does subreport has from Main Report

Hi, we are sturuggling with subreports. Main report has 3 subreports, each subreport is inplmented in a group header(3 subreports and 3 group headers). We would like to print a group header under subreport as a column header every page, and need a page break when group number is changed. This report exports a MS Excel(97-2003) report file.
In main report, [New After Page] is checked under Group Header #1d from [Section Expert]
In each subreport, [Repeat Group Header On Each Page] is checked under the highest group from [Group Expert]
Here are two issues;
Since Crystal Reports has more rows than Excel in one page, colmun header in each subreport is being printed in the middle of the page. It should be printed at the top of the page
When Subreport has many rows and has to be printed in more than 1 page, a page break is automatically inserted before column header. It should be printed right below column header which is Group Header #1
We have been trying to pass row counts(count of group header because group header is used as the details) using a shared variable from Subreport 1 to Subreport 2 via main report since Subreport2 cannot predict how many rows Subreport 1 has.
Here is what we are trying but we are getting an error which is "A constant expression is required here" under main report
- In Sunreport 1
whileprintingrecords;
shared numbervar SubGroupCount := DistinctCount({Table.Field});
- In Mainreport
shared numbervar SubGroupCount;
if(pagenumber) = 1
then (SubGroupCount)
else 50
Is there any solutionss or better ways other than above?
Thank you,
Main Report: Group Header #1a --> as Page Header
Run Date: mm/dd/yyyy Report Name
Main Report Group Header #1b --> Subreport 1
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Main Report Goup Header #1c --> Subreport 2
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Main Report Froup Header #1d --> Subreport 3
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6

Thank you for your reply and sorry for my complicated explanations. The report has confidential information, so I replaced to some fake data but I believe you can still see what I am trying to do..
Main Report
Subreport 2
Output1
Output2: the following page
--> more rows are printed..
We have two problems;
1. The column header in Output2 is supposed to be pronted right below the last row in Output2, however, a page break is automatically inserted. But even in the same output document, it works for some group when it has a few rows..
2. Since Crystal Reports prints more rows in one page than MS Excel does, Column header is not be printed at the top of the page.
I tried the way you advised me but it did not work..

How can I make Numbers respect the row and column locks in an Excel workbook opened in Numbers???

I have a Windows server app that generates Excel workbooks to be emailed to political campaign volunteers to be loaded into Numbers on an iPad, edited, then emailed back to be posted to the server database. There are two problems encountered:
1. The Excel workbook has the first row (column headings) and first column (route identifier) of cells locked, so that they will not scroll off the screen, but Numbers doesn't respect the locks, so when the user scrolls horizontally or vertically, the column headings and/or the route identifier scroll off the screen.
2. The Excel workbook has pop-up "tool-tip" type comments in certain column headings in order to provide the user with the acceptable entries for those columns, but Numbers does not respect those. When the user touches any of the commented column heading cells, a context menu appears instead of the comment.
What must I do in the Excel workbook sheets, or what settings can be made in Numbers to correct the above?

I imported a Numbers '09 file into Numbers on the iPad. All comments were removed during import. Frozen header row and column were retained.
Thank you for your responses I must ask, however, when you refer to "importing" the Excel file, are you referring to a two step process whereby the Excel file is first converted by some other process into Numbers format, then opened in the Numbers application - which is what I have to do in my PC application to generate the Excel file, and reverse that process to convert the Excel back into my database format - or are you simply referring to opening the file in Numbers as "importing" it? And please excuse any ignorance, as I'm not at all familiar with Apple's terminologies. In fact, I don't own an iPad myself, but rather I have to depend on one of my clients to do the testing for me.
I imported an XLSX file into Numbers on the iPad. The file used "freeze panes" to "freeze" the first column and row. Only warning on import was that it changed fonts. It imported without the first row and column frozen and with no comments. Nothing I can do about the missing comments but it was a simple matter to turn the first column & row into headers and freeze them.
Unfortunately this would not be an efficient solution, since the end users are, for the most part, elderly political campaign volunteers who are fairly computer illiterate. These workbooks are actually canvassing lists - known as walklists. Their purpose is for the volunteers to interview voters, record the results of the interviews, and post the results to a database, which provides the campaigns with valuable strategizing capabilities. Also, these workbooks have multiple pages - as many as 10 or more. and from what I infer from the above, the setting changes would have to be made on each page.
My whole intent in developing this iPad/Tablet methodology was to significantly reduce volunteer's work - which is a recruitment benefit - and eliminate paper. While the latter would be accomplished, the former would not, and in fact would tend to increase it. It's necessary to keep the first row - column headings - and the first column - the route identifier - from scrolling off the page, so that the volunteer won't have to keep scrolling up and down and right and left to know what the data are.
Conclusion: Comments are not supported on the iPad version of Numbers. Frozen headers are not imported from Excel but can be recreated easily.
I was previously directed to the Apple website http://www.apple.com/ipad/from-the-app-store/apps-by-apple/numbers.html which extols the wonders of the Numbers application. About halfway down the page there's a section regarding, "Sliders steppers and pop-ups". The web page states that pop-ups can be set up but, being a marketing site, gives no indication whatsoever as to how it's done. I was hoping someone could tell my if there's any way to carry them over from an Excel file.

Row and column headings-how to print without them

Currently Epson C64 and appleworks 6.2
How can I print the spreadsheet without the row and column headings as there doesnt seem to be a place to choose whether to how or not
Thanks for replies
Whilst writing, too many instances of the coloured wheel rotating, nothoing showing on screen, suddenly whole sentences appear. Very irritating, so how can I stop this ?

I'm glad the AppleWorks info was helpful.
About the colored wheel issue: does this happen in all applications in which you are typing? Are you doing other things in that app at the same time. For instance, if Safari is one of the problematic apps, are you also downloading at the same time? I have seen this issue a few times - very rarely - and have found that a restart usually gets things back to normal. I'm not sure if this will be a helpful workaround for you, but it has had some success.

How can i open a PDF bank statement in numbers so that the rows and columns contain properly aligned data from statement?

how can i open a PDF bank statement in "numbers" so that the rows and columns contain properly aligned data from statement?

Numbers can store pdfs pages or clippings but does not directly open pdf files. To get the bank statement into Numbers as a table I would open the bank statment in Preview (or Skim) or some pdf viewer.
Then hold the option key while selecting a column of data.
Then copy
Then switch to numbers and paste the column into a table
Then repeat for the other columns in the pdf document
It would be easier (in my opinion) to download the QFX or CSV version from your bank

How do I delete multiple rows and columns in an image?

I am looking into how digital SLRs extract video data from a CMOS sensor. To give an example, the GH1 from Panasonic can record video at 1920 x 1080 from a 12 MPixel sensor that, say, is 4000 horizontal x 3000 vertical. How they do that seems to be not in the public domain, but there have been a few guesses (see http://www.dvxuser.com/V6/showthread.php?t=206797 and http://luminous-landscape.com/forum/index.php?showtopic=38713).
One approach would be to simply read every second row of sensor pixels (1500 rows read from the original 3000) and once you have those in memory, delete every second column (2000 columns left). You would end up with a 2000 x 1500 image which could then be resampled to 1920 x 1080.
I'd like to simulate what the camera appears to be doing, by generating a 4000 x 3000 test image and then asking Photoshop CS4 to delete the appropriate rows and columns. It may not necessarily be every second row; the Canon 5DMk11 appears to read every third row, so I may need to delete two out of every three rows.
Can Photoshop do that sort of thing? If so, how?

Thanks for the suggestions. Yes, I did take a detailed look at your images, but they weren't 100% convincing because it wasn't clear just what was happening. And Adobe's explanation, after reading it again, explains nothing at all to someone who doesn't know how Nearest Neighbor works.
But you are correct -- Nearest Neighbor does effectively delete pixels. I proved it with the attached 6 x 6 image of coloured pixels (the tiny midget image right after this full stop -- you'll have to go to maximum zoom in PS to see it).
These are the steps to delete every second row and then every second column.
1. Select Image > Image Size.
2. Set Pixel Dimensions > Height to half the original (in this case set to 3 pixels).
3. Set Resample Image to Nearest Neighbor.
4. Click OK and the image shoould now consist of three vertical white strips and three vertical Green-Red-Blue stripes.
5. Repeat steps 1-4, but this time set Pixel Dimensions > Width to half the original (in this case set to 3 pixels). The image should now consist of three horizontal stripes Green-Red-Blue.
Just to make sure the method worked for every third pixel, I repeated the above steps but with 2 pixels instead of 3 and obtained the correct White-Green, White-Green pattern.
I resampled the Height and Width separately for the test so that I could see what was happening. In a real example, the height and width can be changed at the same time in the one step, achieving the same results as above.
Finally, how to explain how Nearest Neighbor works in the simple cases described above?
Division by 2
In the case of an exact division by two (pixels numbered from top leftmost pixel), only the even numbered rows and columns remain. To put it a different way, every odd numbered row and column are deleted.
Division by 3
Only rows and columns 2, 5, 8, 11... remain.
Division by N
Only rows and columns 2, 2+N, 2+2N, 2+3N... remain.
To put it simply, a resample using Nearest Neighbor (using an exact integer multiple) keeps every Nth row and column, starting from number two. The rest are deleted.

Hi, how can i break the value for a row and column once i have converted the image to the array???????

Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
Please help me!
For your information, I'm using LABView 7.0.

Hi,
Thanks for your reply.Sorry for the confusion.
I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
I hope that I have made the problem clear. Sorry if it is still confusing.
Hope you can help me. Thank you!!!!
Attachments:
arrayrowncolumn2.JPG ‏64 KB

How to increase the row and Column length of Bex query in EP Portal 7.3

Dear All,
Please let me know the process to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Please let settings to increase rows up 10000 and column 100 in one page.
Thanks
Regards,
Sai

Dear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai.

How can I preserve row and column addresses on multiple cells at once in Numbers?

How can I preserve row and column addresses on multiple cells at once in Numbers 3.2.2? I do a lot of rearranging and sorting and want to reference cells in other sheets. After entering the formulas (example: '=Sheet1::Table 1::H126') I will sort the table and the formulas will not move with the sort. I think I can fix this by going cell by cell checking the 'preserve row' and 'preserve column' boxes when editing the formula. I want to avoid having to go one by one. I know that checking the boxes creates a formula like this: '=Sheet1::Table 1::$H$126' I have also tried entering this manually and filling down but it doesn't include the preservations (the $$) in the autofill. If there is another way to remedy my sorting problem that would also be welcomed!
THANKS!!

The title of the post is this
How can I preserve row and column addresses on multiple cells at once in Numbers?
I restated the Question as follows
Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
In both cases it is not asked if multiple cells can be set to....
That is a given.
Step back a second... It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
Whats is being asked is: if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
YES or NO
If YES how?

How many rows and columns?

Similar Messages

Maybe you are looking for