How many rows will be allowed in Cusom Section?

how many rows will be allowed in Cusom Section? can I modify the max rows setting?

I think the hardcoded limit in Admin is 250. However, I don't think 250 active rows in a single custom section on a specification would perform very well. I would try not to exceed 30 active rows per section per specification. Performance involves so many variables, it will depend on the type of extended attributes you have used in each cell. For example, if you had one section with 10 columns and 30 rows and every cell had 15 radio button choices the section would take quite a while to render. If helpful, you can always submit your custom section designs to support and we can review it for any potential gotchas.
Thanks
Kelly

Similar Messages

How many rules will Mail allow???

That's the question... How many rules will Mail allow??? I can't find any documentation indicating a quantity. I can not save more that six. Am I missing something?

What was occuring. I was able to save and apply a rule once. If I closed mail, the rule just dissapeared. I was able to replicate this time and time again. I post4ed this question once before on 5/10/13. https://discussions.apple.com/message/21985327#21985327 . Because I received no response to that querry, I posted this again. Thank you for your repsone. I'm not sure what has occurred but I am able to make additional rules, save apply them; quit the application and upon re launch they are there. I have no explination as to what facillitated the change. Thank you for your response and querry.

How many install will "Tiger" allow?

Greetings all,
Quick Tiger question. Is their a limit to the number of times you can re-install it? By that, I mean on the same mac. I was just curious if one day I ws going to try a re-install after breaking something and the computer was going to tell me that I had run out of installs. Probably a really dumb question but I'd like to know.
Thanks,
Chris

Hi Chris;
Back when I still had my G4 MDD I also got an SATA drive and a Firmtek card. My plan was to use it to extend the life of my G4 so that I could get a G5 at the end of last year by using it for my project files.
After doing my testing I changed my mind and decided to move my OS and appls to the SATA disk instead. It was much faster then my old ATA drives. The way I moved everything over to the new SATA drive was SuperDuper. I simply created a clone and the booted from it. It was very easy and straight forward.
For my project files, I decided to create a RAID 0 Array with the two drives which gave me nearly the same performance as the SATA drive.
This configuration worked very well until I got my Quad in December.
Allan

How many PCs will Adobe Premiere 13 allow installation ?

How many PCs will Adobe Premiere 13 allow installation ?

You may install on as many computers as you want... you may activate and use on 2 computers

Is there an easy way to see how many rows in a table? (selected or unselected)

Hi all,
Forgive me if this is a REALLY dumb question but I would love to know if there there is an easy way to to see how many rows there are in a table in InDesign?
(And I bet I am really going to kick myself when I hear the answer and how simple it probably is..lol !)
I am working on a huge catalog and am dealing with LOTS of tables...very long tables too at times. I am also doing a lot of copying and pasting back and forth between InDesign and Excel and it would REALLY help if I knew how many rows there are in a table without having to manually count them (TIRESOME!!).
Also, is there a way to see how many rows I have selected at any one time? It would be SO WONDERFUL if the info box could also provide this information.
Thank you SO MUCH in advance for your help:))
Christine
**UPDATE**
Oh boy I AM going to kick myself! Why only NOW that I wrote this question did I suddenly notice that the Table palette shows the number of rows and columns? lol.
Okay, then is there a way to see how many rows I have selected at any given time?

@Christine – try the following ExtendScript (JavaScript):
if(app.selection.length === 0
    || !app.selection[0].constructor.name === "Cell"
    || !app.selection[0].constructor.name === "Table"){
    exit(0);
var sel = app.selection[0];
if(sel.constructor.name === "Cell"){
    var tableRowLength = sel.parent.rows.everyItem().getElements().length;
if(sel.constructor.name === "Table"){
    alert("All "+sel.rows.everyItem().getElements().length+" rows selected in current table." );
    exit(0);
var numberOfRowsSelected = sel.rows.length;
var indexOfSelectedRows = sel.rows.everyItem().index;
var startRowSel = indexOfSelectedRows[0]+1;
var endRowSel = indexOfSelectedRows.length+indexOfSelectedRows[0];
alert(numberOfRowsSelected +" row(s) selected.\r"+startRowSel+" to "+endRowSel+" out of "+tableRowLength+" of current table.");
You need not select whole rows, just one or a couple of cells.
Then run the script.
An alert message is telling you how many rows belong to the cell range you have selected and:
which rows of the table are selected…
A typical message would be:
6 row(s) selected.
3 to 8 out of 20 of current table.
The script does some basic checks of the selection.
If no cell or table is selected, it will just do nothing…
Uwe
Message was edited by: Laubender | Some language cosmetics in the alert message

How many Rows?

My old Appleworks Spreadsheet was limited to roughly 16,000 rows. Before I pop for new software, how many rows can I make a spreadsheet with using this new software? I've a project where a spreadsheet with the calicity to have 45,000 rows would be great. Otherwise, I'll have to do my project in Appleworks in batches.
Thanks in Advance!

I forget exactly. Somewhere upward of 60,000 I believe. You might find the exact number by searching the forum. It will be an old post, probably by Yvan Koenig.
Note that Numbers can get really slow with large tables. You might be pushing the limits of the current version.

How many sessions does SAP allow you to have ??

Dear Memebers,
How many sessions does SAP allow you to have ??
a) 3
b) 6
c) 9
d) 12.
I guess the right answer is B and C but in choices I have to select only 1, which answer will you pick and Why ??
Thank You.
Madhu.

> I wanted to know for sure what is the answer.
Hi Madhu,
If you are going to ask questions such as these, then please indicate that you have searched and what you do already know and where & why you have a doubt somewhere which is worth discussing in the forum or sharing opinions or experiences on.
Just asking for the answer only so that you don't feel too alone when answering 6 in the interview is of little value.
Normally such "answer a, b, c, or d only or be quiet"-type-threads (like certification tests are) are deleted. That is the rules, and we have them for a reason.
Anyway, you guys seem to have sorted this out amongst yourselves so there is no reason to interfere here IMO. Thanks for that.
Cheers,
Julius

How many computers are you allowed to install cs3 Production suite on?

how many computers are you allowed to install cs3 Production suite on?

>install it on an indefinite number of computers?
You can put the install disc in 1 or 2 or 2000 drives... but that doesn't mean that the activation will work on more than two at a time
Since activation is required to use the program... you are limited to 2 installs at a time
As has been discussed in other threads, you must DE-activate one of your two allowed activations before you may activate on another computer
PS - I think I have also read in the forums that there is some limit to how many times you may activate and deactivate and activate again (no, I don't know the number... I just remember that there was some discussion of such)

Is there a way to know how many rows were rejected using external tables?

Hi,
I'm developing a package that needs to load different kinds of text files into the DB.
I was wondering whether there's a way of knowing in SQL or PL/SQL how many rows were rejected if my external table is defined with "reject limit unlimited".
I'm using the external tables in "insert into ... (select ... from external_table where...)"
sql%rowcount returns the number of inserted rows
I was hoping for something similar/easy to get the number of rejected rows as well.
I know I can try to analyze the bad file for the number of records if there's no other way...
Thanks in advance.

Pyrocks wrote:
I was afraid of this answer...
this is a certain "no there's no other way" or should i wait for other responses (no disrespect - just want to make sure :) )Well the difference would be that this external table will have no complex logic. You would simple read in all the lines from the bad file. The chances that this is broken are therefore very slim compared with your original external table.
And tehre are many other ways possible. For example you can first copy the file into a real internal (temp) table without using any processing logic but with using an external table. Then do the processing / logic checking of the data and move the data from this temp table into your final data structure. Since you move the data two times the whole process will be slower then the original version.

How many rows in detail block

How can I get how many rows I have in my detail block.
Thanks Sibel

There is a way to find out though without iterating through the entire result set and incrementing a counter along the way.
Just issue another select beforehand of the form:select count(*) from ( YOUR SELECT STATEMENT HERE )This will give you a result set with 1 row and 1 column containing a value representing the row-count of the select statement you want to execute.

How many installs of Aperture allowed?

A while back I downloaded the Trial Version of Aperture 2.1.2 onto my G5, then subsequently bought the full version which was also a download. Entered the serial number & I was on my way.
Now I've bought a MacBook Pro and would like to install Aperture on it so as to Upgrade to version 3 at some point in the near future. My question is how many computers are you allowed to have Aperture on? When I try to enter the serial number after installing the Trial on the MBP the registration is not accepting it. My only options are to Quit or continue using it in Trial mode for 30 days. Can anyone shed some light on getting Aperture legitimately onto my MacBook Pro?

buzwah wrote:
Would I be better to try to update the 2.1.2 to the last version 2.1.4 and then try the serial number?
Yes, that is what I would try.
You may also need to install the ProKit 6.0.1:
http://support.apple.com/kb/DL1318
Here is another link that you might need to use due to your already trying to launch 2.1.2 which will have you move the file to the desktop (to the best of my knowledge this file holds the serial number info):
http://support.apple.com/kb/TS3231
For Aperture 2, I recall the file is named something different but similar at the same time as the 'Aperture System ID' - sorry it's been a while since I ran the trial of that version.

How to know how many rows including headers and footers does subreport has from Main Report

Hi, we are sturuggling with subreports. Main report has 3 subreports, each subreport is inplmented in a group header(3 subreports and 3 group headers). We would like to print a group header under subreport as a column header every page, and need a page break when group number is changed. This report exports a MS Excel(97-2003) report file.
In main report, [New After Page] is checked under Group Header #1d from [Section Expert]
In each subreport, [Repeat Group Header On Each Page] is checked under the highest group from [Group Expert]
Here are two issues;
Since Crystal Reports has more rows than Excel in one page, colmun header in each subreport is being printed in the middle of the page. It should be printed at the top of the page
When Subreport has many rows and has to be printed in more than 1 page, a page break is automatically inserted before column header. It should be printed right below column header which is Group Header #1
We have been trying to pass row counts(count of group header because group header is used as the details) using a shared variable from Subreport 1 to Subreport 2 via main report since Subreport2 cannot predict how many rows Subreport 1 has.
Here is what we are trying but we are getting an error which is "A constant expression is required here" under main report
- In Sunreport 1
whileprintingrecords;
shared numbervar SubGroupCount := DistinctCount({Table.Field});
- In Mainreport
shared numbervar SubGroupCount;
if(pagenumber) = 1
then (SubGroupCount)
else 50
Is there any solutionss or better ways other than above?
Thank you,
Main Report: Group Header #1a --> as Page Header
Run Date: mm/dd/yyyy Report Name
Main Report Group Header #1b --> Subreport 1
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Main Report Goup Header #1c --> Subreport 2
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Main Report Froup Header #1d --> Subreport 3
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6

Thank you for your reply and sorry for my complicated explanations. The report has confidential information, so I replaced to some fake data but I believe you can still see what I am trying to do..
Main Report
Subreport 2
Output1
Output2: the following page
--> more rows are printed..
We have two problems;
1. The column header in Output2 is supposed to be pronted right below the last row in Output2, however, a page break is automatically inserted. But even in the same output document, it works for some group when it has a few rows..
2. Since Crystal Reports prints more rows in one page than MS Excel does, Column header is not be printed at the top of the page.
I tried the way you advised me but it did not work..

ADF: Best way to find out how many rows are fetched?

Hello,
I have overridden method executeQueryForCollection of ViewObject in which I execute supper.executeQueryForCollection and after that want to find out how many rows are fetched during the execution.
If I try to use getFetchedRowCount I always get "0", if using getEstimatedRowCount, query are being re-executed.
What method is better to use for that?
Thank you,
Veniamin Goldin
Forbis, Ltd.

I have a 'home-made' view called RBS, whose definition is this:
create view RBS as
select /*+ RULE */ substr(s.username,1,10) oracle,
       substr(case when s.osuser like 'oramt%'
                   then nvl(upper(s.client_info),'client_info not set')
                   else substr(s.machine,instr(s.machine, '\')+1,length(s.machine))||':'||s.osuser
              end
              ,1,20) CLIENT
,      substr(''''||s.sid||','||s.serial#||''''||decode(s.status,'KILLED','*',''),1,12) kill_id
,      lpad(to_char(t.xidusn),4) rbs#
,      lpad(to_char(t.used_ublk),4) ublk
,      lpad(to_char(t.used_urec),8) urecords
,      i.block_gets
,      lpad(to_number(round((sysdate - to_date(t.start_time,'MM/DD/YY HH24:MI:SS')) * 60 * 60 * 24)),9) time
,      upper(substr(s.program,1,20)) PROGRAM
,      to_char(s.LOGON_TIME,'HH24:MI:SS DD-MON') LOGIN_TIME
from   sys.v_$transaction t
,      sys.v_$session s
,      sys.v_$sess_io i
,      sys.v_$process p
where s.saddr = t.ses_addr
and    i.sid = s.sid
and    p.addr = s.paddr
/By monitoring the URECORDS column value of the row that corresponds to my session doing a transaction, I can see how it progresses.
Toon

How to find out How many rows and coloumn exists in the Excel sheet

hai gurus,
present iam uploading data from presentation server to application server. when i use gui_upload the data is coming non-readable format.
so i used alsm_excel_to_int fm for that . but the problem is user can give any type of excel so... i need to know how many rows and coloumn s existed in that Excel
so is there any possiblity to get those values(Total rows and total coloumns).
plz help me..
if any one answered , appreciate with reward points,
thanks&regards,
Venu.T

see you have to come into an agreement with other system before starting development..
Please dont do unnecessary coding for impractical things ..you may solve this but this is not good way of working in eRP packages..
Al least u can get final list of all Columns and which can be blank or non blank like this
then u can do coding for this scenerio
regards...
Message was edited by:
Madan Gopal Sharma

To find out how many rows are processed/updated?

Hi Gurus,
I have given an update statement with parallelism. The data to be processed is huge around 50 million records.
I know that from OEM, we can find out how many rows it has processed or completed. I would like to know the dictionary view/ query to find out the same in SQL Plus.
Thanks
Cherrish Vaidiyan

I have a 'home-made' view called RBS, whose definition is this:
create view RBS as
select /*+ RULE */ substr(s.username,1,10) oracle,
       substr(case when s.osuser like 'oramt%'
                   then nvl(upper(s.client_info),'client_info not set')
                   else substr(s.machine,instr(s.machine, '\')+1,length(s.machine))||':'||s.osuser
              end
              ,1,20) CLIENT
,      substr(''''||s.sid||','||s.serial#||''''||decode(s.status,'KILLED','*',''),1,12) kill_id
,      lpad(to_char(t.xidusn),4) rbs#
,      lpad(to_char(t.used_ublk),4) ublk
,      lpad(to_char(t.used_urec),8) urecords
,      i.block_gets
,      lpad(to_number(round((sysdate - to_date(t.start_time,'MM/DD/YY HH24:MI:SS')) * 60 * 60 * 24)),9) time
,      upper(substr(s.program,1,20)) PROGRAM
,      to_char(s.LOGON_TIME,'HH24:MI:SS DD-MON') LOGIN_TIME
from   sys.v_$transaction t
,      sys.v_$session s
,      sys.v_$sess_io i
,      sys.v_$process p
where s.saddr = t.ses_addr
and    i.sid = s.sid
and    p.addr = s.paddr
/By monitoring the URECORDS column value of the row that corresponds to my session doing a transaction, I can see how it progresses.
Toon

How many rows will be allowed in Cusom Section?

Similar Messages

Maybe you are looking for