How many SAP Systems can access?

Hi,
As per SAP standards is there any limit of accessing the SAP business Systems thr JCo in Webdynpro Java
Thanks,
Sreeni.

hi,
if your external system don't limit the connection, then there is no limit.
Best regards,
John

Similar Messages

HT3291 how many apple tv can access shared computer

How many Apple tv Can Access one shared computer

Depends on your network connection. If you are going to do more than one you DEFINETLY need to use a wired, not wireless, connection. You can do a couple easily this way. There are some people that have posed on here that use 10 or more but that is pretty extreme and your computer would need a pretty heavy IO bus to handle that.

How many users/programs can access a cFP or cRIO channel set

I have used cFP and regular FP for years, but just found a method to gather data from the units without FTP or accessing the flash drives. My question is this, using a FP read VI, or cRIO read VI, how many users can read that data before the cFP or cRIO crash? Can I access that data without influencing the embedded program?
Thanks,
Bill

Hey Bill.
If the data is being sent to shared variables there shouldn't be a limit to the number of "users" or "programs" that can access the data from the shared variables.
Regards,
Claire Reid
National Instruments

How many operating systems can a MacBook support?

I wanted to know if a MacBook can support more than 2 operating systems as I wished to have a Windows OS for some applications in addition to OSX and Linux in which I have to primarily work.

Welcome to the Apple Support Communities
You can install as many operating systems as you want, but if you install Windows, you can't install another operating system because Boot Camp needs two volumes on the hard drive.
I recommend you to install Linux in a virtual machine instead of on a partition if you want to use Windows

How many logical systems are required to connect between one XI and R3 sytm

Hi Experts,
I need to know how many Logical systems we need to create when connecting an SAP XI and SAP R3 system.
details wht I configured is as follows :
For XI : LOGSYSXI assigned to 100 client
For R3: LOGSYSR3 assigned to 800 client.
Do I need to create two log'cal systems on one side?
How many logical systems can a Client can support simultaneously? is it only one or more that one?
THANKS IN ADVANCE.
Sunil K Shetty

Hi,
>>>>I need to know how many Logical systems we need to create when connecting an SAP XI and SAP R3 system.
as you've noticed you only need 2 - one for r3 one for XI
this is enough
also shown in my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
>>>>How many logical systems can a Client can support simultaneously?
one per client
but you can create as much as you wish
wihtout connecting them to a client
but use one for XI
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Parallel How many times user can login to the SAP system through ITS

Hello all
We are using the ITS ---620 and following 46D R/3 system
R/3 system details:
Kernal :
kernel release :46D
O/S :SunOS 5.8 Generic_108528-05 sun4us
We would like to now, At a time How many times user can login to the SAP system through ITS
Kindly letus know if any one have idea about parameter which can restrict the end users to u201CNu201D times/ sessions.
Transaction SITSPMON/SMICM are not working in R/3 system as it is 46D.
We found that parameter u201Clogin/disable_multi_gui_loginu201D works with SAPgui logons.
System logons using the Internet Transaction Server (ITS) or Remote Function Call (RFC) are not affected by this Parameter u201Clogin/disable_multi_gui_loginu201D
I need similar parameter u201Clogin/disable_multi_gui_loginu201D for the ITS users.
Thanks

I have searched all docs and notes.
Everytime the answer is PArameter for multi_gui_logonis not applicable for SAP Gui for HTML ( Browser )
The functionality does not exist for SAP Gui for HTML.
Regards,

How many SAP CCMS Alerts can be conf?

Hi All,
1.How many SAP standard CCMS alerts are available?
2 If CCMS is already configure how to identify what are the alerts configured?
3.How to migrate CCMS alerts form one SolMan to other Solman system?
Please help me for this info.
Regards,
Neni

Hi,
I am not clear on your query,You mean to say maxium number of alerts in each node of ccms?
if yes, this can be done using each nodes,properties->general tab there you can maintain the maximum number of alerts.This restrict the maximum number of alerts generated for this node.
and for your 3rd question you can transport your monitor sets from one system to another system,please check
[http://help.sap.com/saphelp_nw04/helpdata/en/2b/1f5a3b0013ae73e10000000a11402f/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/2b/1f5a3b0013ae73e10000000a11402f/content.htm]
Thanks,
Jansi

How many mails i can send at a time per day using APEX mail system?

HI,
I am working on application, when i have written a process to send mail, i have a project where i have to send mail at a time for all the email id's
given list there are upto 5000 email id's where text body also include certain set of data from a report. thinking at a time 3000 its difficult i divided
it region wise, but still each region have 2000 odd email id's. during testing when i run the process just 950 mails i could send then i got a error
saying "ORA-20001: You have exceeded the maximum number of email messages per workspace. Please contact your administrator." so please
can any one help me to know How many mails i can send at a time per day using APEX mail system?
Thanks in advance
Gowthami

Hi jfosteroracle,
You are getting the error may be the following reason,
Check the following,
Login as ADMIN and Goto -->Manage Instance-->Instance Settings--> Mail-->Maximum Emails per workspace
Actually this number denotes the Number of mails can be sent per 24 hour for the workspace,It may exceeded.
It may be the reason.
Thank you.
Regards,
Gurujothi
Edited by: Gurujothi on Jun 27, 2012 5:54 AM

On how many hosts we can scale out system components (horizantally) in OBIE

On how many hosts we can scale out system components (horizantally) in OBIEE 11g, Heard that its around 16.. is there any doc i can refer to ?
~Srix

On how many hosts we can scale out system components (horizantally) in OBIEE 11g, Heard that its around 16.. is there any doc i can refer to ?
~Srix

In how many ways we can load hierarchies to SAP BW and which transfer mthd

Hi guru's,
In how many ways we can load hierarchies to SAP BW and which transfer method is best.
can anyone explain me with suitable example.
Thanks,
Madhu Raj.

There are standard datasources available for hierarchies also. If the standard datasource does not satisfy your requirement you can always load a hierarchy using flat file. Refer to the below link for the same
http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/frameset.htm

How many 7920 phones can be supported on one Cisco 1131AG access point?

hi all,
who knows that how many 7920 phones can be supported on one 1131ag AP? Thanks a lot...

Hi Alomar,
Hopefully this info will help;
Number of 802.11b Phones per AP
Before any discussion about network planning can take place, it helps to understand the basics of the overall network capacity.
The following network capacity guidelines apply to sizing the Wireless IP Telephony network:
No more than 7 concurrent G.711 calls per AP.
No more than 8 concurrent G.729 calls per AP.
Note These design recommendations assume that Voice Activity Detection (VAD) has been disabled on the Cisco 7920 Wireless IP Phones. Use of VAD on the Cisco 7920 phones can conserve bandwidth, but Cisco recommends that you disable VAD on all Cisco CallManager servers to provide better overall voice quality.
In addition to determining how much bandwidth is needed for an 802.11b VoIP call, you must also consider overall radio contention for a particular RF channel. The general rule is that you should not deploy any more than 20 to 25 802.11b endpoints per AP. The more endpoints you add to an AP, the more you reduce the amount of overall bandwidth and potentially increase transmission delays.
The maximum number of phones per AP depends on the calling patterns of individual users (based on Erlang ratios). Cisco recommends no more than 7 concurrent calls using G.711 or 8 concurrent calls using G.729. Beyond that number of calls, when excessive background data is present, the voice quality of all calls becomes unacceptable.
From this doc;
http://www.cisco.com/en/US/products/hw/phones/ps379/products_implementation_design_guide_chapter09186a00802a0a05.html
Hope this helps!
Rob
Please remember to rate helpful posts.....

How many airport express can i install in my home to stream music?

I plan to buy many airport express in my new Home!
how many airport express can i install in my home to stream music?
Jimmy

jimmyflo wrote:
I plan to buy many airport express in my new Home!
how many airport express can i install in my home to stream music?
Theoretically as much as you want but there are technical limitations about the usable bandwidth in the wireless or by the used access point.
All participants (stations) in a wireless network share the available bandwhith equally and therefore a point will get reached where the throughput in the network became insufficient to stream music.
Also some routers limit the number of stations could get connected. For instance Apples Airport Extreme have a limit of 50 connected clients and the AP-Express (if used as access point) a limit of 10 simultaneous connections.
Lupunus

How many TREX systems do I need?

How many TREX systems do I need?
1 for non-production and 1 for production?
1 for all systems?
dev->tst->prd ?
any help would be appreciated

Depending on the size and the activity in DEV and QAS, generally one server would be sufficient, just be sure to put a decent amount of RAM into the server (by decent I mean around 16). You can have both sets of indexes on one TREX instance, and the majority of time, no one knows the difference.
Here's the caveat, though. If you're going to be testing with hundreds of users in QA, all performing searches at the same time, then you might want to split them up.
Also, depending on the number of documents and searches in production, you might consider a distributed approach there, as well.
Thank you.

Neha.R how many levels we can block billing docs...?

Hi SAP GURUS,
How many levels we can block billing documents.
how it is imapact of billing levels.
send me every level of impact , and how is to be......
Advance Thanks
Neha .R

Hi G. Lakshmipathi,
Thanks for your suggestion,
My Question is where we can make setting this kind of Requirement.
Based on customization only it impact in SO level .
Thanks,
Neha.R

How many dunning levels can be defined ?

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. Suspected points abuse. >Hello friends
Could u tell me,how many dunning levels can be defined ?
regards
AA

hi anu
Insap provides max 9 levels but all companies use 4 levels only.If u want use 9 levels also.
At the time of FBMP configuration u cen give Dunning levels field 9.and then save.U cen run 9 levels inDUNNING RUN F150.
Deifference is one level to another level DUNNING TEXT.
Dunning text determines URGENCY OF DUNNING NOTICE.
U cen give 9 levels dunning text also at the time of fbmp configaration
Edited by: prasad k on Jul 11, 2008 3:14 PM

How many SAP Systems can access?

Similar Messages

Maybe you are looking for