How many simultaneous clients are supported by the LMS 4.0?

I am working on a bid that needs to support
at least 30 operators accessing the LMS 4.0 at the same time.
I could not find this information on the documentations.
Thanks for any help

LMS does impose a simultaneous client limit. LMS can handle up to 20 concurrent users on the system. This is documented in the LMS 4.0 installation guide at http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.0/install/guide/prep.html#wpmkr1373140 .

Similar Messages

Up to how many CPU sockets are supported by the Windows Server Technical Preview?

I hope that all of a server's physical sockets are detected so that every core is usable by the operating system.

I have a situtation that I need to order a new server
for a new application getting developed?
I have the idea of no of users will be working on
them will be around 100
How will I decide Server with How many CPU do I
require?
and how much the amount fo physical memory should I
order with the Server?
Which are the factore affecting them and how will I
decide on them?
Is there any note given by oracle?Sounds like you need to start at the beginning with some of
Tom Kyte's books, the Oracle documentation &c.
You must have some idea of the throughput of your system.
If you are going to be using tons of I/O, then CPU might be
irrelevant, but you'd damn sure want the disk (array)(s) to
be up to scratch,
on the other hand,
if you are going to be doing lots of calculating/processing, then
your CPU might be critical.
It's a question only you can really answer.
Post a more detailled spec here, along with a budget*
and you may receive more assistance.
Rgs.
Paul...
* budget is normally very very important also...
We could tell you to buy two (one backup) HP-UX boxes
with 16-way SMP capacity and a 10TB 100 disk SAN, with,
oh, say, 10 disk controllers, but that's
not much use if your budget is... ahem... constrained.
Gagan

How many span ports are supported on Sup2T and Catalyst 6880?

Hi,
I did not find any information concerning this.
Would be great if anybody could send me a link to the information how many span ports are supported on the new Cat68 series.
Regards
Thorsten Steffen

For sup2t
========
Local SPAN, RSPAN, and ERSPAN Session Limits
Total Sessions
Local and Source Sessions
Destination Sessions
Local SPAN,
RSPAN Source,
ERSPAN Source
Ingress or Egress or Both
Local SPAN Egress-Only
RSPAN
ERSPAN
80
2
14
64
23
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/15-1SY/config_guide/sup2T/15_1_sy_swcg_2T/span_rspan_erspan.html
Regards,
Naveen
****Rate if it is helpful****

I have a presentation to make to a customer and need to know how many educational apps are there for the iPad/iPod?

I have a presentation to make to a customer and need to know how many educational apps are there for the iPad/iPod? More specifically special education apps.
Thanks

Keep in mind as well that not all apps are "created equal". Some are really good, and others are not very good. You might also want to look at some education sites for recommendations. An example of a general iPads in education forum is
http://ipadeducators.ning.com/
but I imagine some exist for special education needs as well. Our healthcare organization is using some apps for working with autistic children and find them very helpful.

How many versions back are supported?

Hi,
Does anyone know how many versions back is Oracle Lite supported?

5.0.2 is the last version to be support. version 4.0 was desupported

2960 switch - How many IGMP groups are supported

I saw that the 2960 can support up to 256 multicast addresses, while performing IGMP snooping. Is that per interface or per the whole machine ?
Thanks.

The number of addresses given is for the whole machine

Recent Contacts - How many email addresses are kept?

How many email addresses are kept on the recent contacts list? Can't find this listed anywhere.

I assume you are referring to it physically putting another separate contact in Address Book, and not the autofill list when typing an address into a new message window.
Mail does not have an option to add addresses from email to the address book automatically. The fact that you say it happens with the Exchange account and not the other accounts indicates that it's an exchange account problem.
Are you syncing the exchange account contact list with apple's address book? If so, you might take another look to the exchange account for something there.

How many concurrent admin sessions are supported on CiscoWorks LMS 3.2?

How many concurrent admin sessions are supported on CiscoWorks LMS 3.2?

We recommend having no more than 20 simultaneous users logged into LMS (for performance reasons). All of these users can be administrators. That said, there is no hard limit.

Getting the page size and knowing how many pages they are in PDF file

Hi There,
when i do this script (
var myPDFFile = File.openDialog(["Choose a PDF File"]); )
with JS via Windows it is used for opening a new PDF file when i import this file i need to
get the page size and how many pages they are in PDF file. but i dont know how to do it.
please help me.

Ask here: http://forums.adobe.com/community/indesign/indesign_scripting

None of the authentication methods supported by this client are supported by your server.

Dear Exchange Admin
We have implemented exchange server .
MAPI profile configuration in outlook is working fine.but when we try to configure POP3 in outlook ,without SMTP authentication it is fine.
But when we enable SMTP authentication ,it is getting the following error
"None of the authentication methods supported by this client are supported by your server.
Kindly help
Ashraf

This worked for me today, as I had the same issue.
I had to set encryption to TLS to get it to work, and the server names as yahoo.co.uk...
In Outlook 2013, click File | Add Account.
Select Manual setup or additional server types.
Click Next.
Select POP.
Click Next.
On the “Account Settings” page, enter your account settings:
Your Name: The name you want to show when you send email.
Email address: Your full Yahoo email address.
Account Type: POP3
Incoming Mail Server: pop.mail.yahoo.com
Outgoing Mail Server: smtp.mail.yahoo.com
User Name: Your Yahoo ID.
Password: Your Yahoo account password.
Leave the “Require logon using Secure Password Authentication” option unchecked.
Click More Settings.
Click the Outgoing Server tab.
Select the My outgoing server (SMTP) requires authentication box.
Click Use same settings as my incoming mail server.
Click the Advanced tab. Enter advanced information:
Incoming server (POP3) port: 995
Select This server requires an encrypted connection (SSL).
Outgoing server (SMTP) port: 465, 587, or 25
Set the encryption type to SSL or TLS
Set your desired server timeout and delivery options.
- We recommend leaving a copy of messages on the server.
Click OK.
Restart Outlook.
Click Send/Receive All Folders.
You can now retrieve emails from your Yahoo Mail account in Outlook 2013.

How to khow how many foreign key are referenceing the primary key

sir i would like to know that how many foreign key are referencing the primary key of a table
is any command to know the table name
please suggest
thanks in advance..

In the query below, table_name is the name of the table whose primary key is referenced.
SELECT b.owner owner
,b.constraint_name foreign_key
,b.constraint_type constraint_type
,b.table_name referencing_table
,b.r_constraint_name primary_key
,c.table_name referenced_table
,c.column_name referenced_column
FROM all_constraints a
,all_constraints b
,all_cons_columns c
WHERE a.owner = b.owner
AND a.table_name = :table_name
AND a.constraint_type = 'P'
AND b.r_constraint_name = a.constraint_name
AND b.constraint_type = 'R'
AND c.constraint_name = a.constraint_name
AND c.owner = a.owner;
If the name of the primary key is known, the query below
select * from all_constraints where constraint_type = 'R' and r_constraint_name = :pk_name

Im using iPhone5 and i register in apple store for my apple ID for the apps, i use my visa then after it appear that i need contact iTunes support to complete this transaction. how many times Ive tried its still the same ....

im using iPhone5 and i register in apple store for my apple ID for the apps, i use my visa then after it appear that i need contact iTunes support to complete this transaction. how many times Ive tried its still the same ....

To Contact iTunes Support...
Click > Here

How many simultaneous SSID ?

How many simultaneous SSID can I configure on Cisco AIR-BR1310G ?
Thanks in advance.

Hi Roberto,
You can configure up to 16 SSIDs on your access point/bridge and assign different configuration settings to each SSID. All the SSIDs are active at the same time; that is, client devices can associate to the access point/bridge using any of the SSIDs. These are the settings you can assign to each SSID:
â¢VLAN
â¢Client authentication method
Note For detailed information on client authentication types, see "Configuring Authentication Types."
â¢Maximum number of client associations using the SSID
â¢RADIUS accounting for traffic using the SSID
â¢Guest mode
â¢Repeater mode, including authentication username and password
â¢Redirection of packets received from client devices
http://www.cisco.com/en/US/docs/wireless/access_point/1300/12.3_4_JA/configuration/guide/o13ssid.html#wp1002608
Hope this helps!
Rob

How many users does HFM support?

Hi,
how many users does HFM support(Maximum)? and why we are choose HFM compare to Hyperion enterprise?
thanks
Edited by: user10919054 on May 18, 2009 3:07 AM

There is no limit, as long as you pay for the licenses and make sure you have a robust system to support user connectivity and demand.
Hyperion Enterprise is the previous Consolidation tool most commonly used by many companies. Think of HFM as the "New Generation"....

How many threads can be running at the same time

Hi!!
Dows anyone knows how many Threads can be running at the same time in the JVM.
I'm making a multi thread client-server app and I would like to know how much simultneous connections the JVM support. I'm using one Thread per connection.

Hi, thanks to all for your answers.
I think that I made the wrong question, as you said: "that means the number of threads currently created".
I'm worry about this because my application is already online (It's a mail server -SMTP and POP3 server using ORACLE for the users database- ) and some other user post in the "multi-tread forum" that almost any JVM can only have 700 threads created at the same time, and I've never heard or read anything about this.
what you mean with the stack space (memory??)
I'm using the JavaWebServer 2.0 and a servlet to start the main Thread.
Again Thanks to all for the answers but I think that the schapel answer is the one that solve my doubt...

How many simultaneous clients are supported by the LMS 4.0?

Similar Messages

Maybe you are looking for