How many simultaneous sessions

Hi All,
Is there a parameter on the app server that limits the number of simultaneous SAPGUI sessions to 5?  If so, is there a "real" limit and what might that be?
Thanks in advance for your help.

Hi Randy,
Try look at profile parameter "rdisp/max_alt_modes" and it's description.
This parameter controls how many sessions are possible for one logon (2=>10).
To control multiple logon you can use profile parameter "login/disable_multi_gui_login", again try read it's documentation (Yes/no).
The combination of this two parameters is your "real" limit.
(Also consider parameter "login/disable_multi_rfc_login").
Regards
Rolf

Similar Messages

  • Is there a restriction on how many simultaneous wireless iPads can watch movies from one iTunes account or AppleTV generation 2 or later?

    Is there a restriction on how many simultaneous wireless iPads can watch movies from one iTunes account or AppleTV generation 2 or later?

    Welcome to the Apple Community.
    I find it hard to believe that this information isn't clearly available somewhere, but it isn't and I don't think I've seen anyone here who is 100% sure. However, I believe you can have up to 10 associated devices, which include authorised computers (of which you can have up to 5), I suspect the Apple TV might become a temporary associated device while it's in use, but I'm not entirely sure myself.

  • Counting how many active sessions in a webapp

    Hi folks,
    I was wondering if it is possible to count how many active sessions that there currently are in a webapp? I've looked at the ServletContext and ServletConfig classes, but I can't find anything. Any ideas?
    Cheers,
    Raj.

    HttpSessionListener was introduced in servlet spec 2.3 which is supported in Tomcat 4.0 but not 3.3.
    If upgrading to 4.0 is not an option, there is no elegant way to get what you need. There is no API call that returns all the active sessions so you must do it yourself. One way is to create a class that implements HttpSessionBindingListener to track your sessions. Instantiate it on start-up and add its reference as a session attribute when the session is first created. You can then update your custom session info in the valueBound and valueUnbound methods.

  • How many simultaneous SSID ?

    How many simultaneous SSID can I configure on Cisco AIR-BR1310G ?
    Thanks in advance.

    Hi Roberto,
    You can configure up to 16 SSIDs on your access point/bridge and assign different configuration settings to each SSID. All the SSIDs are active at the same time; that is, client devices can associate to the access point/bridge using any of the SSIDs. These are the settings you can assign to each SSID:
    •VLAN
    •Client authentication method
    Note For detailed information on client authentication types, see "Configuring Authentication Types."
    •Maximum number of client associations using the SSID
    •RADIUS accounting for traffic using the SSID
    •Guest mode
    •Repeater mode, including authentication username and password
    •Redirection of packets received from client devices
    http://www.cisco.com/en/US/docs/wireless/access_point/1300/12.3_4_JA/configuration/guide/o13ssid.html#wp1002608
    Hope this helps!
    Rob

  • How many Internal sessions?

    Hi,
    How to find out that a particular program uses how many internal sessions?
    Is there any function module?
    Regards,
    Rahul

    Hi rahul,
    When you call a function module, the ABAP runtime system checks whether you have ... It is only of limited value for passing data between internal sessions.
    http://help.sap.com/saphelp_nw70/helpdata/en/c6/617d0ce68c11d2b2ab080009b43351/content.htm
    thanks
    trinadh

  • How many client session at max can a JCO connection support for webdynpro

    Hi Everybody,
    We have a Java Webdynpro Dc application with ARFC model, it will be accessed by some hundreds of people. So, How to know whether this application wil support that many client sessions. And where to configure the jco's to suppport that many number of client sessions.
    Thanks & Regards,
    Ravi

    Hi Ravi,
    Just check this reply similar to your prob:
    If you are using Windows. Then you can right click on the properties of My Computer and select properties. Go to advanced Tab-->Environment Variables and then add this CPIC_MAX_CONV paramter. Restart portal after this.
    set CPIC_MAX_CONV=500
    Further Look at SAP note 314530,316877
    regards,

  • How many simultaneous https conections ... ?

    Hello all,
    Could you tell me how SSL modules are needed for handling twenty thousand HTTPS simultaneous connections (for e-invoices services)? I read that one ssl module can handling eight hundred transactions per second and twenty thousand simultaneous SSL sessions per module, but I can not understand the difference.
    At the moment I have two CSS11503 devices without ssl modules.
    Thanks !

    an open connection, even inactive requires some memory.
    That's the 20k limit.
    An active connection will require CPU.
    That's the 800 transactions limit.
    So, you can have 20k connection alive, but if they are all very active, the users may experience delay.
    I think 2 modules would be better but 1 could be enough.
    Gilles.

  • How many simultaneous clients are supported by the LMS 4.0?

    I am working on a bid that needs to support
    at least 30 operators accessing the LMS 4.0 at the same time.
    I could not find this information on the documentations.
    Thanks for any help

    LMS does impose a simultaneous client limit.  LMS can handle up to 20 concurrent users on the system.  This is documented in the LMS 4.0 installation guide at http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.0/install/guide/prep.html#wpmkr1373140 .

  • How many simultaneous access have Oracle Express?

    i work in a healthcare institution in Brazil, and we need a server of SQL, we think in ORACLE EXPRESS... but we can't found the number of simultaneous access it has.

    Ten.
    Page 24 of this guide.
    http://switch.atdmt.com/action/appleairportexpress_techoverview

  • How many simultaneous users can a CAP3503E AP accomodate

    Hello,
    I am doing right now a site survey using CAP3502E (downgrade to autonomous).  I have a certain section with 12 users and the client wants 5 users per AP.  Can the CAP3502E accomodaet 12 users at a time?
    Thanks,

    Thanks for the ratings.
    Just want to say a few things:
    1.  You can never go wrong if you get a wireless site survey done prior to installtion of APs.
    2.  If you have budget for MORE APs than what the wireless site survey states, be thankful.  Not everyone is as lucky as you.
    3.  If you do happen to get a wireless site survey done, please set your settings for wireless voice application in mind.

  • Monitoring conferencing sessions in CUCM ( How many ports used for conferencing)

    Hi
    How is it possible to see how many conferencing session or conferencing party is used in CUCM 9.1 system.  We are using conference bridges on call manager resources. But I 'm not sure, how many conferencing capacity we have?
    Is there any clue to see it?

    Hi there!
    Please find in RTMT the Performance section. Then choose needed cucm server and proceed to Cisco SW Conference Bridge Device.
    You can monitor this things:
    RosourceActive - shows how many parties connected
    RosourceAvailable - remained capacity
    RosourceTotal - total sw bridge capacity
    SWConferenceActive - shows how many conferences are active on sw brigde
    and other.

  • How many users on one T1

    Hello, this is likely a simple question for anyone but
    me...but I haven't seen a clear answer after an hour of searching
    documentation.
    I am looking to set up a FMS that will be connected to a T1
    line. If during a live webcast the media encoder is set to upload
    the stream at about 450kbps, how many simultaneous users can we
    expect to serve at the maximum?
    Thank you so much!
    Rob

    QoS means Quality of Service.  Basically it reorders or delays packets depending on priority, so that time-sensitive packets always go first, and unimportant packets like bittorrent can be delayed until there is no other traffic being sent.  What I specifally was suggesting here is that your use it to lower the priority of bittorrent traffic, so that you can run it all the time but it only uses spare bandwidth that isn't being used by any other service.
    The only catch most routers can only do QoS on inbound connections which is mainly helps latency and not download speeds.  However, if your router is running linux it may have that ability.  Also look for the 'tc' utility or maybe you can install trickle.
    This thread has little bit more info.
    Last edited by xenobrain (2010-07-20 14:11:50)

  • How to get real time information about how many user are logged in and thei

    I use tomcat as my server platform in Ubuntu for a war file.
    I know in order to get real time information about how many user are logged in, we can count how many active sessions exist by a SessionCounter code. However, I have to permit HttpSessionListener in web.xml of tomcat. From other users' experiences, the configuration is complexed and has some errors.
    Here's the link:http://www.stardeveloper.com/article...1112001&page=1
    In order to get users' ip, in jsp, use request.getremotehost() or
    request.getremoteaddress() by editing the jsp file.
    I wonder if there's some open source software to use for these two purposes.
    Thank you!

    That url is missing a few bits. The ... in the middle doesn't help.
    we can count how many active sessions exist by a SessionCounter code.
    However, I have to permit HttpSessionListener in web.xml of tomcat.
    From other users' experiences, the configuration is complexed and has some errors.And have you tried it? The configuration isn't that complex.
    What errors do you mean? Errors in tracking people, variance in the count? Probably related to internet issues and nothing you can do will alleviate them.

  • MaxActive?? how many connections should be made available

    Can anyone recommend what I should set the maxActive="" property of my database resource connection for a medium to large scale ecommerce application.
    How many simultaneous database connections might I expect?
    I know this is dependant on the volume of traffic on the site, but I just need a general Idea, I currently have maxActive="100", but I'm a little worried that this may be insufficent for a site that may have up to 5000 concurrent users.
    Thanks in advance.

    Do you have a formula for the above, to give an
    estimated requirement for maxActive connection
    settings?
    Sorry! there is no real formula but since you are working on a web application the number of connections used will be close to the number of requests at a time on your web application.
    And the number of concurrent users dosent give much idear about the number of concurrent requests becouse users dont keep clicking all the time. Most of the time they will be reading somthing on the browser.
    Here is a simple calculation but only accurate if you assume that server takes 1sec to process each request.
    If the number of concurrent users is 5000 and each user makes a click once in every 60secs, then there will be aproximatly 5000/60 requests/sec. That is 83.333... requests
    I assume the only warning sign I will get when
    maxActive is reached will be browsers 'hanging' until
    it either times out or a connection is released to
    the pool?Browsers normally times out and display an error if the server do not respond within a predefined interval (Normaly 90secs) thats what you should watch out for.
    By the way if what you want is to make sure the maximum is never reached just set it to a negative value.(Assuming that you are using apache commons pool. negative means infinity)
    And set reasonable numbers to MaxIdle, MinEvictableIdleTimeMillis, and TimeBetweenEvictionRunsMillis. Please read the documentation of the setter methods of above attributes if you dont know what above attributes are for.
    you can also add a back end page to your web application to display the staticstics of the pool.
    such as the number of current idle connections, current active connection and ect...

  • How many connections allowed for eval WLS?

    How many concurrent sessions are allowed with the eval copy of WLS 8.1?
    thx

    license.bea is xml file which you can read. ;)
    $BEA_HOME/license.bea
    units="5"
    Cheers
    mbg
    "Tom L" <[email protected]> wrote in message
    news:3ede16ce$[email protected]..
    >
    How many concurrent sessions are allowed with the eval copy of WLS 8.1?
    thx

Maybe you are looking for

  • Mid 2009 13 inch Macbook Pro HD upgrade to SSD - compatible drives

    Hi - Just wanted to make sure that this will be compatible with my mid 2009 macbook pro 13 inch. Intel 530 SERIES 480gb 2.5-Inch Solid State Drive http://www.amazon.com/Intel-SERIES-2-5-Inch-Reseller-SSDSC2BW480A4K5/dp/B00GV7V6 EA I'm overdue for an

  • Publishing to MobileMe

    There are two different instructions: on iWeb on publishing it instructs you to go to www.[membername].com/site name; on iWeb Help instructions it instructs you to go to http://web.me.com/membername/SiteName. Niether retrieves the site, why? I just p

  • The JPEG attachemnet in email from InfoView in BOE X3.1 is too small

    We are running BOE X3.1 sp2 in a Windows environment. A person logs into InfoView and runs a Crystal report. The person then chooses to send it by email. The email is sent but the JPEG attachment is too small and blurry.  Is there a setting to increa

  • Task list usage

    Dear Guru's   I thank for your support, because of which iam able to perform well. I have a doubt in Task list usage. I can create various task lists (Gen, Eqp & FL). How to assign General Task list to an equipment or functional location. How it is u

  • Anyone else having problems with the music controls in the control center?

    Ever since the iOS 7 post release update (iOS 7.0.2) I've have trouble with the music controls not working properly. Wondering if anyone else was experiencing the same issues....