How many spine nodes will be supported on ACI Fabric?

Hi Experts,
I want to clarify how many spine nodes will be supported on ACI Fabric now and future(maximum number of spines)? Because there are some different speculations about that. Someone says it'll be 12, others say it'll be 16 spines. Which one is correct or others?
Thanks in advance.
Paul

Hi, Paul,
As today and the roadmap as per my information, We are still looking at 6 spines in each fabric.
Number of leafs support has more importance which is 200 within one fabric in the upcoming release Q2'15. One fabric will also support approx 100 FEXs as well.
Regards,
Anser

Similar Messages

1921 Router Q: How many IPsec tunnels will it support?

Sorry if this isn't the spot for hardware questions... I need to know how many IPsec VPN tunnels one Cisco1921 can support reliably. Haven't had any luck sifting through documentation on the web.
Thanks in advance for any help!

The SEC-K9 permanent licenses apply to the Cisco 1900, 2900, and 3900 ISR G2 platforms; these licenses limit
all encrypted tunnel counts to 225 tunnels maximum for IP Security (IPsec), Secure Sockets Layer VPN (SSL
VPN), a secure time-division multiplexing (TDM) gateway, and secure Cisco Unified Border Element (CUBE) and
1000 tunnels for Transport Layer Security (TLS) sessions.
The SEC-K9 license limits encrypted throughput to less than or equal to 85-Mbps unidirectional traffic in or out of
the ISR G2 router, with a bidirectional total of 170 Mbps. This requirement applies for the Cisco 1900, 2900, and
3900 ISR G2 platforms. The SEC-K9 permanent licenses apply to the Cisco 1900, 2900, and 3900 ISR G2 platforms; these licenses limit
Thanks
Ajay

How many maximum nodes possible in RAC 10g

Hi,
This is for my knowledge only.
Any idea that how many RAC nodes is possible in 10g maximum.
Thanks and regards,
Chitrasen

Hi Chitrasen :
From MetaLink:
"How many nodes are supported in a RAC Database?:
With 10g Release 2, we support 100 nodes in a cluster using Oracle Clusterware, and 100 instances in a RAC database. Currently DBCA has a bug where it will not go beyond 63 instances. There is also a documentation bug for the max-instances parameter. With 10g Release 1 the Maximum is 63. In 9i it is platform specific due to the different clusterware support by vendors. See the platform specific FAQ for 9i."
So, for 10g R2, looks like 63... lots more than most sites will ever use, I suspect!
HTH.

How many users can 1 Xserve support?

I have one Xserve (10.5.2, 2x3GHz, 5GB RAM, 1.34TB RAID 5) that I want to support the following services for my SMB:
DNS, DHCP
AFP, NFS, SMB
Open Directory
Print
Software Update
I also want to have mobile sync'd network home folders, but only for ~/Documents and iCals and Address Books (I don't want everyone's MP3s or family photos).
I occasionally will use NetBoot/NetInstall, but only 1-2 users at once.
I am getting ready to migrate my company to OpenDirectory and 10.5.2 for all users and was hoping someone here might be able to tell me how many users I can reasonably support with one Xserve.
Also, is it a bad idea to have everyone using "mobile" accounts? It seems like it would be less strain on the server to have the occasional sync from users than everyone reading & writing all the time. Also, if anything happened, there would be a local copy and a remote copy of any files.
Thanks.

Rosemarie,
BeehiveOnline currently supports 95,000 users and we have groups on the system as large as 10,000, that is probably about as big as we want to go - remember collaborating with 10,000 users is not an effective way of working - maybe a more open way of delivering content may be more appropriate. Given that the only issues we have with very large groups is the time it takes to run and the email traffic it generates as the large group are processed.
So it is possible to host 10,000 in a group but we need to be warned in advance and work with you to minimise the impact as the group is set up.
Phil

How many customer records will Business Catalyst CRM hold? Thank you!

How many customer records will Business Catalyst CRM hold? Thank you!

Hi,
To what I'm aware is that there no limit set as such and never had any issues earlier with the limit for CRM customers.
Please let us know for any issues that you face doing so submitting a ticket via Help & Support button on your Admin console.
Kind Regards,

How many touch points will there be in JavaFX 2.2

I know 2.2 will support multi-touch. Exactly how many touch points will be possible?

Hello, maximum number of touch points is limited only by capabilities of the used hardware and underlying operating system, there is no such limitation in FX itself.

How many 7920 phones can be supported on one Cisco 1131AG access point?

hi all,
who knows that how many 7920 phones can be supported on one 1131ag AP? Thanks a lot...

Hi Alomar,
Hopefully this info will help;
Number of 802.11b Phones per AP
Before any discussion about network planning can take place, it helps to understand the basics of the overall network capacity.
The following network capacity guidelines apply to sizing the Wireless IP Telephony network:
No more than 7 concurrent G.711 calls per AP.
No more than 8 concurrent G.729 calls per AP.
Note These design recommendations assume that Voice Activity Detection (VAD) has been disabled on the Cisco 7920 Wireless IP Phones. Use of VAD on the Cisco 7920 phones can conserve bandwidth, but Cisco recommends that you disable VAD on all Cisco CallManager servers to provide better overall voice quality.
In addition to determining how much bandwidth is needed for an 802.11b VoIP call, you must also consider overall radio contention for a particular RF channel. The general rule is that you should not deploy any more than 20 to 25 802.11b endpoints per AP. The more endpoints you add to an AP, the more you reduce the amount of overall bandwidth and potentially increase transmission delays.
The maximum number of phones per AP depends on the calling patterns of individual users (based on Erlang ratios). Cisco recommends no more than 7 concurrent calls using G.711 or 8 concurrent calls using G.729. Beyond that number of calls, when excessive background data is present, the voice quality of all calls becomes unacceptable.
From this doc;
http://www.cisco.com/en/US/products/hw/phones/ps379/products_implementation_design_guide_chapter09186a00802a0a05.html
Hope this helps!
Rob
Please remember to rate helpful posts.....

How many server nodes can you create per instance

Hi,
Very often the bottle neck in a java installation (NW04s) is the heap size. In order to increase the heap you simple create new server nodes.
My question is:
How many server nodes can you create per instance?
Is there an upper limit before you have to create a new dialog instance (with a web dispatcher)?
I can imagine that when you create a new server node you also have to increase the heap and max therad of the dispatcher. Is there any upper limit of the heap size of the dispatcher node ?

Rasmus , I think you laid out a real good scenario for every one to contribute
I may be very late but just updating this forum for benefit of everyone who visits this.
In addition to all the points above one must also consider following things if one decides to add more server nodes to one dispatcher
1.Garbage collection time
2.Dispatcher would keep on sending request to node S2 if it is not completely bad and there by impacting all the servernode so you might end up restartiing the entire cluster.
3,Debugging also becomes diffculy as you are not sure on which server node you are within the cluster.
4.If you have something like F5 which does hear beat monitoring even one server node goes bad F5 will not report anything.
So in my view one server node per dispatcher is an ideal configuration.
Over All Dispatcher does not consume more resouces (Disk Space + CPU + memory ) at the same time it will give you maintenance flexibility.
Nothing is right or wrong ,all these things are based on how your infrastructure set up is.
Cheers !!
Manish Jain

I'm trying to back up 10.6.8 (snow leopard) and all my files before upgrade to Mavericks. I have an old but sturdy external hard drive...how many GB available will I probably need to back up the whole thing? thanks!

I'm trying to back up 10.6.8 (snow leopard) and all my files before upgrade to Mavericks. I have an old but sturdy external hard drive...how many GB available will I probably need to back up the whole thing? thanks!

You will need a separate partition unless you plan to use the entire drive. You will need an amount of space somewhat larger than the total space now used on your startup drive. If you select the startup drive's Desktop icon, then press COMMAND-I to open the Get Info window. Used space will be shown in the topmost panel. Add a GB or two to that number to determine how much space you'll need for the backup.
Do not backup on a drive that has any files you want to keep. You can make a bootable backup as follows:
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

How many days it will take to unlock an iphone 4s , it is locked with 02 network from England

how many days it will take to unlock an iphone 4s , it is locked with 02 network from England. I had laready given IMEI number to concerned guys

but one of my friend has taken my IMEI number and starte processing here from india and he got some contacts in US , the process has been already started. He told that it gonna take 3 working days to get unlocked.
regards,
HarisH

How many control files will be present in a database?

How many control files will be present in a database?

See this link for control file recommendations
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96524/c04space.htm
See the portion "Control Files Overview" and the last "Multiplexed Control Files"
Don't forget to reward points if this answer your query.

How many airport express can be supported by software remote at one time.

how many airport express can be supported by software remote at one time?
I mean remote software can control at one time

Well Apple makes an iOS application called 'Remote' it's used to control iTunes on a Mac, Or to control an Apple TV Multimedia features.
Apple also makes "AirPort Utility" for iOS. Airport Utility can be used to configure Aiport Extrem, Airport Express And Time Capsul using an iPad, iPhone or iPod Touch. You can use it to connect to one device at a time. While connected to the device you can configure it to work as part of a larger Airport network. If you want to configure muliple device, you would connect to one device, configure it, And then connect to the next device, and configure it, and so on and so fourth.
I haven't found a limit.
How big of a network are you trying to make?

How many concurrent admin sessions are supported on CiscoWorks LMS 3.2?

How many concurrent admin sessions are supported on CiscoWorks LMS 3.2?

We recommend having no more than 20 simultaneous users logged into LMS (for performance reasons). All of these users can be administrators. That said, there is no hard limit.

How many luns does mac OSX support from a single target (array) is it 255??

How many luns does mac OSX support from a single target (array) is it 255?
For example, if using the Dual-channel 4Gb Fibre Channel PCI Express card? Is it 255, 512 or higher? I know it uses the ATTO driver, but I can't find any documentaiton about the upper limits of how many luns this HBA can address from a single target array on a SAN. Thanks.

Hi,
The card should be an ATTO 42ES whcih supports 255 LUNS per channel
Here's the info from the attached link
Consider the following Celerity FC host adapter guidelines:
• ATTO 4-Gb and 8-Gb FC cards (PCI-X and PCIe only) are supported. • Latest HP-specific ATTO Celerity FC host adapter driver • Latest HP-specific ATTO Configuration Tool • A maximum of 256 targets per host adapter channel are supported. • A maximum of 255 logical unit numbers (LUNs) per host adapter channel are supported. • PowerPC- and Intel-based servers are supported.
http://www.attotech.com/pdfs/MacOSFCconnEVA5697-7653.pdf
Hope that helps
Beatle

I have not upgraded to Mountain Lion yet, have 3 major apps (acrobatpro) and adobe image ready, and apple works that is not compatible, does anyone know how long snow leopard will be supported. Don't want to upgrade until I purchase new iMac next year.

I have not upgraded to Mountain Lion yet, have 3 major apps (acrobatpro) and adobe image ready, and apple works that is not compatible, does anyone know how long snow leopard will be supported. Don't want to upgrade until I purchase new iMac next year.

Consider running your Adobe and AppleWorks software in Snow Leopard (with Rosetta) installed in Parallels in Lion or Mt. Lion:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

How many spine nodes will be supported on ACI Fabric?

Similar Messages

Maybe you are looking for