How many storage unit type per Material code
Dear ERP Expert
we are running SAP ECC 6.0 with decentralized Warehouse Management System (WHP).
In material master data of WHP, view Warehouse Mgmt 2, there is the "Palletization data" box, with the following column:
Loading equipment quantity 1
Unit of measure for loading equipment quantity 1
1st storage unit type
In this way it is possible to define, per material code, 3 different pallet type, isnt'it?
I would like to know: To define different pallet types what kind of the impact could have?
I mean, someone tell us that the main impact to define different pallet types, in WH material master data is:
1 - When receiving the goods the TOu2019s will have to be created manually. The system cannot define the used pallet by itself and this is very important for the placement.
2 - The issuing of the goods is not possible via RF (radio frequency). This will have to be done manually as this is not supported.
is this scenario relalistic or is it possible to do something in order to avoid this scenario?
regards
marco
1)Storage unit type is assigned to the eacj warehouse number.
2)It is activated for each storage type in the warehouse.
3)Goto SPRO->LE->Warehouse mangmt->Mater Data->Material->Define storage unit type.
4)Here you assign storage unit type to warehouse number
5)You can activate SU mngmt at warehouse level here:
SPRO->LE->Warehouse mangmt->Storage Unit->Master Data->Activate SU mngmt per warehouse number
6)You can also activate SU mngmt at storage type level
SPRO->LE->Warehouse mangmt->Master Data->Define storage type.
Reward if helpful
Similar Messages
-
Storage unit types per storage type
Hello all,
i would like to know how to maintain/allow storage unit types per storage type. it would be much helpful if you could mention the SAP IMG path and the t-code.
thanks,
MaxxHi,
Goto SPRO --> Logistics Exection --> Warehouse Management --> Master data --> Define Storage type
In this node for your warehouse number and storage type combination activate the check box SUT check active.
Regards,
DilliB -
How many new tax type and tax code are created for change in TDS
Hello Gurus.
we are using SAP since more than one year.
now tDS rate is change , so i would like to know How many new tax type and Tax Code is created in our system
and also like to know At what percentage i will crete that new tax code.
we have pair of tax type and tax code as shown in Example( for Interest) below
Tax type Tax code Name
I1 IC Sec 194A - Interest on deposits
I1 IO Sec 194A - Interest on deposits OT
I2 IC Sec 194A - Interest on deposits Surcharg
I3 IC Sec 194A - Interest on deposits EC& SHEe
I3 IO Sec 194A - Interest on deps EC& SHEe OT
I4 IC Sec 194A - Interest on deposits Pymt
I4 IO Sec 194A - Interest on deposits Pymt OT
I5 IC Sec 194A - Interest on dep Pymt Surcharg
I6 IC Sec 194A - Interest on dep Pymt EC& SHEe
so how namy additional reuire to create new tax type and code more.
i am waiting your reply.
Regard,
Riten patel
Edited by: riten patel on Oct 29, 2009 10:23 AM
Edited by: riten patel on Oct 29, 2009 10:23 AM
Edited by: riten patel on Oct 29, 2009 10:33 AMHello Hansachechani
we have followinng tax key
115O Dividend 115O(1)
192B Salary
194A Interest income other than securities
194C Payment to contractors
194H Commission
194I Rent
194J Prof/Technical services
195 Payment to foreign nationals
206C Tax Collected at Sources (Scrap)
ST Service Tax
and we have followig tax type
C4 Sec 194H Commission Payment
C5 Sec 194H Commission Pymt Surcharge
C6 Sec 194H Commission Pymt EC & SHE Cess
D4 Sec 115O(1) Dividend Payment
D5 Sec 115O(1) Dividend Pymt Surcharge
D6 Sec 115O(1) Dividend Pymt EC & SHE Cess
F4 Sec 195 Foreign Prof fees Payment
F5 Sec 195 Foreign Prof fees Pymt Surcharge
F6 Sec 195 Foreign Prof Fees Pymt E&HS Cess
G1 Service Tax on GTA
G2 Service Tax on GTA E Cess
G3 Service Tax on GTA S&HE Cess
I4 Sec 194A Int on Deposit Payment
I5 Sec 194A Int on Deposit Pymt Surcharge
I6 Sec 194A Int on Deposit Pymt EC & SHE Ce
L4 Sec 194C Contractors Payment
L5 Sec 194C Contractors Payment Surcharge
L6 Sec 194C Contractors Payment EC&S HE Ces
P4 Sec 194J Professional Payment
P5 Sec 194J Professional Pymt Surcharge
P6 Sec 194J Professional Pymt EC & SH E Ces
R4 Sec 194I Rent Payment
R5 Sec 194I Rent Payment Surcharge
R6 Sec 194I Rent Payment E Cess & SH E Cess
So Is it necessary to create new tax key and tax type?
wheather i create new tax code only?
I ma waiting your reply.
Regard,
Riten patel -
Storage unit type allowed per storage type
Hello all,
i would like to know how to maintain/allow storage unit types per storage type. it would be much helpful if you could mention the SAP IMG path and the t-code.
thanks,
Maxx1)Storage unit type is assigned to the eacj warehouse number.
2)It is activated for each storage type in the warehouse.
3)Goto SPRO->LE->Warehouse mangmt->Mater Data->Material->Define storage unit type.
4)Here you assign storage unit type to warehouse number
5)You can activate SU mngmt at warehouse level here:
SPRO->LE->Warehouse mangmt->Storage Unit->Master Data->Activate SU mngmt per warehouse number
6)You can also activate SU mngmt at storage type level
SPRO->LE->Warehouse mangmt->Master Data->Define storage type.
Reward if helpful -
How much storage units can be added in the single bin.
Hi all,
Can anybody tell me how much storage units can be added in the single bin.
DevHi Dev,
AS Prashant & Abhijit mentioned above the maximum storage units in a single bin is based on various factors such the putaway strategy & capacity check you have set for your storage type as well as palletization data.
Now in case of Bulk Storage which you have mentioned above, please go through the below F1 help for the block structure.
In bulk storage, you need to define for each block (or row) how many
storage units fit into the block. For this purpose, you must define
both the number of columns as well as the maximum stack height. *The*
product of these factors usually gives the maximum number of storage
+units and is determined automatically by the system. However, it is+
possible to change the maximum number of storage units to a lower number
if the storage bin or the material features require this.
Hope it helps.
Thanks & Regards, -
Hello,
I would like to know how to assign storage unit types for a stroage unit. are there any restrictions to assign a particular storage unit type for a storage unit.
Thanks,
MaxxHello Maxx,
When you create Transfer order at that time you need to mention the storage unit type for that transaction and based on that it will assign storage unit type to storage unit.
There are some controls for this
- Storage type level: Here you restric what are the storage unit type allowed for that particular storage type (Tran code: OMM1)
- You can activate SUT check for storage type in master data for storage type.
- You can define the Storage unit type in Material master which will be defaulted when you do pallatization
Hope this helps.
Regards
Arif Mansuri -
Hi,
I have the following situation:
In our warehouse, materials are received in kilograms and stored and transferred in barrels or containers.
For this reason we are using storage unit types "barrel" and "container".
For the barrels, we have a defined bin structure. Containers are stored in one large area with no restrictions to the number of containers.
For barrel storage we use placement strategy P (palletization). This because a maximum of 4 barrels can be placed in a bin. We created 4 bin sections per bin to hold the maximum of 4 storage units.
My question is this:
To check if a storage unit can be placed in a bin works fine. A maximum of 4 barrels is allowed in a barrel bin.
However, when converting a TR to a TO i want to check the entered quantity PER storage unit type.
For a barrel, a maximum of 250 kilograms is allowed. For containers, a maximum of 1500 kilograms is allowed. Material can be stored in barrels, as well as in containers.
How do i let the system check the allowed maximum quantity per storage unit type?
Thanks in advance,
PaulHi Paul
I can see why it is failing now.
For a storage type with Palletization strategy, it considers the capacity per bin and not per section. Therefore it will allow you to putaway 750KG in a single section of the bin (250 used by SUT totaling 1000 for the bin).
Your requirement is capacity check per SUT with a set maximum material quantity.
A different way of handling this is using capacity check method 2 for the storage type.
Then update your material master data (WM2 view) with Palletization data.
250 KG <Barrel SUT>
No update to storage bin masters is required.
A drawback of this strategy is you can work only with the one SUT for a material. System will not take in to consideration any data given in line 2 or 3 in Palletization Data. In other words you cannot restrict the max quantity for Containers for the same material.
Perhaps depending on the storage type characteristics of your container store, we may make some work around.
Let me know if you wish to discuss more.
Regards
Baseer -
Split transfer order on the basis of Storage Unit type(SUT)
Hi,
I got one problem and want the solution for that immediately.the problem is as follows:-
The transfer Order needs to be split by quantity according to the quantity per Storage Unit Type.
I have to do this making chages in the SAP standard user Exit EXIT_SAPLL03A_12 in the program SAPML03T.
Eg.One scenario is provided
Scenario 1: Perform transaction MIGO with a movement type 101 for Outbound Delivery 80000201. Enter a quantity of 15 kgs.
the result should be as follows:
Scenario 1: Check TOs created by going to transaction LT22. Enter Warehouse number 200; Storage type 902. Select the Dynamic Selections button and select Transfer order Item. Double click on Material and enter the material number (W075006). The SUT is 5kg so the expected result is for 3 TOs to have been created.
Means one TO got splitted in 3 TOs.
Please provide me the help.Hi Vinay,
This can be done purely through customizing. Please check IMG -> Logistics Execution -> Warehouse Management -> Activities -> Transfers -> Processing Performance Data/Split. You will need to define a sorting profile for TO split in where LETYP (storage unit type) can be used as sorting condition. The sorting profile should then be assigned to defined TO split.
Hope it helps.
Have a nice weekend! -
Storage bin type and storage unit type.
Hi,
Can anyone explain what is the differnce between the staorage bin type which is maintaine for storage bins and the storage unit type which is maintained in material master.
Can any one correct me that My material storage unit type is maintained in TT and the storage bin for put awayis maintained in PC (storage bin type).
is this the right way to be adapted.
SunilHi,
THe storage unit type is a description of how the material is stroed in the storage bin.
Some bins may not able to allow a full pallet due to height restrictions,but a half-pallet may fit.so warehouse can define a storage unit type that defines a half-pallet and qty of the material that can fit on that half-pallet.
Configuration menu path:IMG-logistics Execution-Warehouse Management-master data-material-define storage unit type.
where as storage bin is the lowest level of storage defined in the warehouse.
With Regards,
Jaheer. -
Hi,
I would like to put a material away. but I get this error "Storage unit type is not allowed in storage type 050"
where can I define the storage unit type for this storage type
Thanks
DedeCan you explain how you are getting this error ?
Storage unit type navigation:
SPRO->logistics execution->master data->material->define storage unit types
Thanks
Seshu -
Storage unit types and storage bin types - Need
Hi,
i want to know what is the use of the storage unit type and storage bin type.
thanks,
MaxxDear Maxx,
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f844694afa11d182b90000e829fbfe/frameset.htm
Storage Bin:
A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
You can also define the following additional characteristics of a storage bin:
Maximum weight
Total capacity
Fire containment section
Storage bin type (for example, for small or large pallets)
With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
Storage Unit:
In the system, a storage unit record consists of a header and at least one material data record (quant data record).
The header contains information which is relevant for the entire storage unit and includes the:
Storage unit number
Storage unit type (SUT) of the storage unit
Storage bin in which the storage unit is currently located
Status, which provides current information about the storage unit
Specific information about the stock contained in a storage unit is found in the material data record. The material record is already familiar to you in the existing system as a quant data record. For SU management, this information can be managed at the storage unit level.
The following graphics illustrate how WM handles storage bins with and without the use of storage unit management. For these examples, storage bins are displayed in which 200 boxes of red pencils and 50 boxes of blue pencils are stored. The stock is distributed on two pallets.
Hope this will help.
Regards,
Naveen. -
MIGO and storage unit type ?
Hi
In MIGO, in the WM tab. When replacing the unit of storage type by another and the user execute save. the system always takes the unit storage type of material.
Is there a way so that the system takes the storage unit type entered by the user and not of material ?
Many thinksI believe the answer is yes, this link may give you some good info for this:
http://help.sap.com/saphelp_40b/helpdata/es/36/1939516e36d1118b3f0060b03ca329/frameset.htm
The link does not explain in details the actions or transaction you must use to correct your settings but it explains it well. -
Hi Experts,
Is it possible default the storage unit type in LT04 ?
if yes, kindly advise how to configure in SPRO?
Thanks.
Regards,
StevenHi
Not sure if you use HU and packing material. You can try through this config
IMG-Logistics General - Handling Unit management - Basics - Warehouse Management - Assign Storage Unit type to Packing Material Type.
For every packing material you can maintain a default storage unit type
Regards
Jayaram -
Hi all
Does anybody knows how to take sales report from SAP per material code.
Please advice me with Tcode if it's possible.
Thanks a lot in advance!Hi
Try trans. MCTC it should solve your problem . You can provide the material number and get the required information .
You can also get the information Sales Area wise and within desired time frame.
Thanks
A
Edited by: A on Mar 6, 2009 11:57 PM -
Storage unit type not found automatically on LT01
Hi,
We have just only one kind of storage unit type in the settings. I want it to be determined automatically on TO creation(LT01) , so that the user is not required to enter it everytime he creates a TO
I couldnt find a way to do it via custimizing. Appreciate any tips about it.
Thanks
Cihan PolatHi,
I dont have a problem with storage type determination.
Acctually what is missing on LT01 is storage type indicator LTAP-LETYP (EXP for my example).
This is the field on the second screen of LT01 (SAPML03T- 102).
It is located under quantity, which is just second line on the screen.
Requested qty 1 PC 5SQ2 370-0KA06 /N-OTM.C6 3pol
Stor. unit type EXP Material 5SQ23700KA06
Certificate no. Plant/Stor.loc. 1000 1550
Confirm
Printer Stock category
GR date 12.04.2010 Special stock
TO item 0
Tpe Sec Stor.bin Target quantity AUn
Src 0 PC
Dest 0 PC
Ret. 0 PC
Goods recipient Weight 0,000
Maybe you are looking for
-
Dual boot - Installing Win 8 on a preinstalled Win 7
I just puchased a Toshiba Satellite C55-A5195 Windows 7 preinstalled. But I would like to dual boot it installing Windows 8. Can I do that without messing the whole system? I know that I have to create a partition to install Win 8.
-
HP Omni 220 PC to video camera
I need to connect my HP Omni 220 PC with no firewire port to my CanonOptura 60 video camera, that has FireWire output. The adapter that Amazon sells DOES NOT work.
-
When I select an album that has not artwork, choose 'Get Info', check the "Artwork" box, drag a picture to the blank box, apply it, etc. It acts as if everything is working. However, no artwork is displayed with any of the album items.
-
Full Screen Mode with Window Tabs? (Mac)
I have never been able to use Full Screen Mode / Full Screen Mode with Menu Bar because my Window Tabs disappear. Until now I have ignored this but I really want to start making the most of my screen space. I don't understand how people can go into f
-
Hello all, I develop my J2ME app using Eclipse/EclipseMe. When I launch my app I use the Eclipse menu. I suppose that Record are save in a file but where?! I would like reset all data that I put in my emulator. Do you have an idea? I read the WTK emu