How many structures can a BEx report have?

Hi All,
How many structures can a BEx report have?
Is there any limit to that.
Thanks

Hi
we can create two structures in the querl level.
we can able to create two structures on rows but on columns it allows only one structure.
key figures can be included in characteristics. characterstics can't be included in the keyfigures.
we can save the structure as global and locally.
from query performance point of view its not recomemnded to create the structure.
it decreasse the query performance.
it may help you.
bye,
kumar.

Similar Messages

How many pages can a PDF form have?

I'm about to reformat a word document into a PDF form. The document is over 50 pages long and may include simple form fields to large areas of text that can be entered and also various check boxes. Is there a limit to how many fields you can have in one document? Also with such a long document, may there be issues with users, editing and saving?
Thanks for any insight before I begin this project.

There's no specific limit. But if you are talking thousands of form fields you could see poor performance.
Be sure you are fully aware of the limitations in Adobe Reader if you intend the form to be used by Adobe Reader. ASSUME NOTHING. For instance, many people have come a cropper by assuming that Reader will be able to just save filled in forms.

How many HDDs can a dv6-4023TX have?

I'm thinking of installing an SSD as the main drive in the new dv6-4023TX I have just bought.
The User Manual talks of the "Primary hard drive" as if there can be a secondary?
I took the back cover off but couldn't see if there was space for a second drive. I didn't want to remove the HDD that was visible for fear of upsetting it.
Because SSDs are rather expensive I will only be able to afford a small one, 60Gb? So I want to install the current drive as the main data disc and use the SSD purely as a system disc.
This will mean transfering the second partition (where the backup OS, Windows 7 Home Premium 64bit lives) to the second disc. I don't have a Windows installation DVD.
How will this impact reloading Windows from the backup disc (should I ever have to)?
This question was solved.
View Solution.

Thanks for a very quick response.
Since the dv6 will only allow ONE HDD my hope to use an SSD is moot.
120Gb SSD would be too small for my requirements of total storage and any bigger an SSD would cost ttttoooooo much.
Thanks again for your quick response

In query, how many objects can include in structure

Hi expert,
In BEX query coloum, How many objects can include in structure.

Hi Sunil,
We can include maximum of 999 fields in one structure.
http://help.sap.com/saphelp_nw04/helpdata/en/4d/e2bebb41da1d42917100471b364efa/frameset.htm
Regards,
Venkatesh

How many users can you have on one account ?

Hi,
I have just created a ID with Adobe Reader for a group to use files stored in cloud. I would like to know how many users can access the account at one time via, mobile devices, ipad, desktops ?

I don't know if there is a limit; you do mean the free https://cloud.acrobat.com/ ?
I will move your post to the Acrobat.com forum, where someone hopefully can give you a definitive answer.

How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first

Please help!!
How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first installation?

Thank you for your answers, it helps me a lot.
But sorry for my ignorance. I understand how you mean it, but I don't know how to do it. I'm scared to lose the settings/edits of the images.

I'm a school tech coordinator. Many computers and many iPads. How many Apple IDs can I have per device, and how many devices can have the same Apple ID? To make my life easier, I'd like 200 devices to all use the same Apple ID.

I'm a school tech coordinator. I have many computers and many iPads. I apologize if there is a some place that has all the rules governing the use of Apple IDs. I looked, and I even tried to get the answers from multiple Apple rep's. I couldn't find the answers.
How many Apple IDs can I have per device?
I want to use the same computer to sync and backup many iOS devices. The iOS devices would be associated with different Apple IDs.
I may load apps under a school Apple ID and have users load their own apps under thier own ID.
How many devices can have the same Apple ID?
Can I use the same Apple ID on all the computers in a lab?
Can I use the same Apple ID on all iPads for a particular grade level?
Are the rules different for iOS devices and computers?
I know that there are limits on "authorize" and "de-authorize" and how frequently those things can be done.
Recently I heard that for the life of an iOS device, it can only be associated with five Apple IDs. That is not good for a school giving iPads to students in a 1:1
To make my life easier, I'd like 200 devices to all use the same Apple ID.

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html
It would be best to address your questions there, especially since this is a public forum, and over there you could post more private issues with this set-up. Not to mention, getting more official answers.

How many tasks can I have in NI-DAQmx system?

I am working out of the office this week - please send your response to [email protected] as well as my normal email [email protected].
I am designing a new test platform that will run on C# (because we like object oriented text based programming and because the IDE is free). For hardware we'll use your PXI modules (because your hardware is ultra-reliable). I'm starting with the following PXI modules 6259, 4072, 6509, 2575, and 2569, but we made add other modules later as future requirements demand. I am doing the system software architecture now. I've done some dabbling with Ni_daqmx, and I loathe "tasks" and "channels", but am determined to make them work.
The difficulty I'm having revolves around the overhead with setting up tasks and channels and with the concept of tasks and channels. Help hasn't helped much. Tasks seem to work great if you intend to always collect the same large amount of data from many sources and always will do it in exactly the same way.
We want something much more akin to random access memory. We'll have UUTs of different kinds coming on and off at random times. Sometimes a test will need a simple DC voltage, and other times another test will need 2 seconds worth of data at 1MS/s. It can cost around 150msec to make that change (stop the current task, creat another one, configure anohter channel, start up a new task, blah, blah, task this, channle that - for the life of me I can't understand what this damn taks concept does for me but make matters more complicated and bog down my system).
I can just barely glean from the help that I can have only one analog input task at once, but I can have sevferal taks of several different kinds running at the same time ( a digital output task and another task for digital input, and another task for analong input, etc.) . It does seem that I can set realys without having to put them into a channel and a task (Thank goodness for that - I just wanna turn on a relay I have no idea what a relay "channel" might be.)
In the PXI system I described above I'll have two devices that are analog input devices, the DMM and the Daq. Even with two devices, can I only have one analog input task running? Does that mean I've got to waste 150msec just to switch from the DMM to the Daq? (Do you understand my frustration with "tasks"? - I should be able to say "read DMM" and turn around and say "read Daq channel 0" without having to jump thru task and channle hoops and waste a bunch of time doing it).
I'll also have Daq digital IO and two 6509 digital io modules. Do I have to cram all of that into some "task" concept too? The Daq card has got many other kinds of wonderful capability (frequency measurement, counters, analog output). How many tasks can I have for that stuff? On the DMM card I can measure capacitance amoung other things. Will I have a capacitance task? The idea of a "capacitance task" hurts my head.
Golly I hate tasks. Please help.
I am working out of the office this week - please send your response to [email protected] as well as my normal email [email protected].
Dave

Dave,
Thanks for posting to the NI Forums.
For the good of the community we like to keep conversations that start of the forums on the forums rather than moving to email. If you want to move to email support I recommend contacting NI through the email route.
I will answer your questions here. If you need more direct contact please feel free to contact us through [email protected].
For some the concept of tasks may seem daunting, however, for many applications it makes life a lot more simple. A task at a very fundamental level is simply a collection of channels with a single type (AI, DI, DO, etc.) and a single timing configuration (sampling rate, continuous vs. finite, etc.). It is a way to organize configuration data.
The concept of a task is an abstraction like OO programming. Like OO programming it may take some time to understand but can be a time saver in the end. Also like OO programming it does add some initial programming overhead. It is much more simple to simply type a printf statement in C than to have to create a bunch of classes just to output text to the screen. You can accomplish the same thing not using OO programming, but in the end OO programming is extremely useful, because it groups useful information and methods together in one place.
With very simple applications OO programming sometimes does not make sense. But as a program gets more and more complex OO programming becomes more and more useful. It takes some learning but it is worth it.
I believe the concept of a task does the same thing. It does not change the actual functionality of the device or add excessive overhead. It is just an abstraction that pulls configuration data about a specific "task" and methods the task can perform into a single logical place.
Unlike the entirely abstract concept of an Object, a Task is run on a physical device and therefore has physical limitations. You can create multiple tasks of the same type, but you can only run a one timed task of each type on a single board at a time. In other words you can have multiple AI tasks running at the same time but they need to run on different boards or only one can be timed (have a rate). You can also have multiple timed AI tasks configured for a single board but only one can actually be running at a time.
The reason you can only have a single timed task running at a time is because the M-Series boards (and many other boards as well) have a single timing engine for each type of acquisition or generation. There is a single timing engine for AI, one for AO, and so forth. You cannot have channel 1 running at 1 MS/s and another running at 50 kS/s.
However, tasks can exist even when they are not being actively run. You can create all the tasks you need at the beginning of your program and simply start and stop them as you need. After the task is stopped you do not need to clear the task until the end of your program. You can further increase performance by moving the Task into the latest state possible without actually starting the task. This can be done by calling myTask.Control(TaskAction.Action). The Task states are further explained in the NI-DAQmx Help Manual.
The concept of a task will need to be used with any device that is being programmed using NI-DAQmx. The 6259 and 6509 will need to be programmed using DAQmx. With the 2575 and 2569 you have the choice of either using the NI-DAQmx API or the NI-SWITCH API. The SWITCH API does not use the concept of tasks. For the 4072 you will need to use the NI-DMM API. This API also does not use the concept of tasks.
Hopefully this information is helpful. Let me know if you have any additional questions or concerns.
Regards,
Neil S.
Applications Engineer
National Instruments

Before i buy the complete creative cloud, how many computers can i install it on with the one subscription? i have a macbook pro laptop and a iMac desktop, which i both need it on.

before i buy the complete creative cloud, how many computers can i install it on with the one subscription? i have a macbook pro laptop and a iMac desktop, which i both need it on.

Creative Cloud Help | Creative Cloud / Common Questions
"Can I use the software I download from Creative Cloud on more than one machine?
Yes. Creative Cloud desktop applications can be downloaded and installed on multiple computers, regardless of operating system. However, activation is limited to two machines per individual associated with the membership. See the terms of use for more information. Learn how to deactivate a Creative Cloud license on a machine."

I have an SL install disc; how many machines can I install it on?

I have an SL install disc; how many machines can I install it on?

frederickmitch wrote:
I have an SL install disc; how many machines can I install it on?
If it's a white disk with 10.6.3, technically as many Mac's that came with 10.6.3 or below that can run 10.6.
Legally, only one.
If it's a grey disk, then only the same model of Mac, as there are no hardware drivers for other Mac models on the grey disks.

HT4480 I have redemption codes for FCP from my university - how many machines can I install on?

I have redemption codes for FCP from my university - how many machines can I install on?

Do you have these codes because this will be your app? Or is this a "loan" from the school to install on your machine? Do you use your own Apple ID to redeem the code and install the app?
If it is your app, then you may install it on as many Macs as you own or have in your control.

How many times can you download a song on iTunes and have it count?

I'm wondering. Someone I like have released a song on iTunes and I wanna support them and I dont mind spending a few bucks on them.
So how many times can I download a song and still have it count as an individual purchase? And what about gifting?
thanks.
-andy.

As Polydorus said, get only one download per purchase for anything you buy from the iTunes Store other than iOS apps or iBooks. I'm not sure what you mean by "individual purchase" or what you are asking in reference to gifting.
Regards.

How many times can you change your iPod if you have insurance

How many times can you change your iPod if you have insurance

If you are talking aboutn the Apple warranty, if the iPod is defectve and not abused there is not limit.
If you have AppleCare+ which covers accidental damage
two incidents of accidental damage coverage, each subject to a $29 service fee plus applicable tax.1

How many fonts can I have without issues on my Macbook Pro?

How many fonts can I have without issues on my old Macbook Pro? I am running 10.6.8.
Thanks,
dugmoore

dugmoore --
Are you having problems? If so, tell us what they are.
If you just want tons of fonts, you should have a good font manager, other than the Font Book that comes with your Mac. And you should avoid "free" fonts. They cause monumental problems.

I have photoshop CS 5.1. How many computers can I install it on?

i have photoshop CS 5.1. How many computers can I install it on?

Try this link and log in with the ID/Password you used to register it.
https://www.adobe.com/account/my-products-services.html#MyProductsHeader
Click on the triangle next to your product to reveal your serial number.
Gene

How many structures can a BEx report have?

Similar Messages

Maybe you are looking for