How many temp sites can be active on business catalyst

Hoiw many temp sites can be active at one time on business catlyst. I have a 4 temp sites with business catalyst url's but the last one will not go one line its erro massage says no start page.

Hello,
The issue that you're facing is not related to the number of trial sites. There are many users with much more temporary sites active than in your case. The issue is something else here, which can be a start page not configured in the "site domains" section of the site. However, it will need to be checked to be determined. Can you hence, provide us with the URL to the site where you face this issue?
Cheers
Parikshit

Similar Messages

  • For some reason, I cannot change my desktop background no matter how many times I delete the "active" folder.  It's as if it's locked.  Any ideas how I can fix it?

    For some reason, I cannot change my desktop background no matter how many times I delete the "active" folder.  It's as if it's locked.  Any ideas how I can fix it?

    Yes it sounds like you have a corrupted preference file.
    The setting you make in individual programs get saved to a Preference file in your Users/Library/Preferences folder.
    All you have to do is drag out the old file to the desktop, reboot and load the program and the preference file gets rebuilt without your preferences which you reset.
    For your case I beleive the preference file is
    com.apple.desktop.plist

  • Is there a limit on how many times I can install my CS5?

    I own CS5 and have it installed on 2 computers. I need to upgrade my computers and am wondering if I am going to have any trouble installing CS5 onto new machines. Is there a limit on how many times I can install the program? Do I have to verify ownership first or what?

    I believe the limit on how any times an application can be installed has been removed, but, as it stands, there is no limit to the number of installations you can have... just the number of activated installations.  For what it sounds like you are doing, there is should not be an issue of hitting a limit even if there is one.
    If you are reinstalling on new machines then you probably want to deactivate the current installations before you attempt to activate on the new machines.

  • How many days we can store the data  in psa & ods ?

    hi guru's
    how many days we can store the data  in psa & ods ?
    Thanks & Regards.
    Prabhakarreddy

    Hi Prabhakarreddy,
    As many days as you like:
    In the PSA you can keep data as long as you like but you will need more and more disk-space. So its advisable to clean up from time to time.
    Example:
    PSA's from full loads Clean up in a weeks time,
    PSA's from Deltas: Clean up after you are sure data is correct. (e.g. a month or 90 days)
    Remember that you cannot do a reconstruction from dataloads of which you have deleted the PSA. If some thing is wrong you will have to do an Init again!
    In ODS's you must keep data in order to keep your delta loads to cubes in order. Removing data will force you to do a new initial load.
    Sometime companies delete old data form ODS's that is older than a certain period (e.g. more than 3 years old) by running a selective deletion. You will have to do an init again. But loads and activation may run faster and of course you gain on disk space.
    Udo

  • How many years we can store the data in ODS as well as psa data ?

    Hi guru's
    how many years we can store the data in ODS? can u give particular years ?
    how many days we can store the data in psa ? could u tell me step by step procedure ?
    Thanks
    Reddy prabha

    Hi Prabhakarreddy,
    As many days as you like:
    In the PSA you can keep data as long as you like but you will need more and more disk-space. So its advisable to clean up from time to time.
    Example:
    PSA's from full loads Clean up in a weeks time,
    PSA's from Deltas: Clean up after you are sure data is correct. (e.g. a month or 90 days)
    Remember that you cannot do a reconstruction from dataloads of which you have deleted the PSA. If some thing is wrong you will have to do an Init again!
    In ODS's you must keep data in order to keep your delta loads to cubes in order. Removing data will force you to do a new initial load.
    Sometime companies delete old data form ODS's that is older than a certain period (e.g. more than 3 years old) by running a selective deletion. You will have to do an init again. But loads and activation may run faster and of course you gain on disk space.
    Udo

  • How many iPhone I can install my application with my apple ID? and is it legal or not??

    how many iPhone I can install my application with my apple ID? and is it legal or not??

    I believe the limit on how any times an application can be installed has been removed, but, as it stands, there is no limit to the number of installations you can have... just the number of activated installations.  For what it sounds like you are doing, there is should not be an issue of hitting a limit even if there is one.
    If you are reinstalling on new machines then you probably want to deactivate the current installations before you attempt to activate on the new machines.

  • How many NPS server can be registered as radius server in AD

    Hi
    We are using 2x Microsoft (2008 R2 Ent) NPS radius servers for our Wifi authentication for two different SSID on Aerohive WLAN network. 
    Trying to setup radius authentication for our Cisco Network devices and trying to use one of the radius server which we are using for our wifi auth. Followed all the steps but auth keep failing and now I am getting to the point where I am ready to deploy
    new NPS server for this.
    Before I go ahead and complete the install and register the new radius server in our AD, I would like to know if there is a limit for how many radius servers can be registered in Microsoft Active Directory.
    Thanks Heaps
    Sid

    I believe from the older versions, that the limit was 256? But of course, we wouldn't want to go that far.
    If you are trying to configure a Cisco device and you have a Cisco 24/7 Gold Support contract, they will help you and step you through it on both the Cisco side and the Windows side. I've used them before for a Cisco AP 1231 a few years back, and their support
    was phenomenal and well worth the price of the contract.
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • How many ways you can invoke JSP from OBPM

    Hi All,
    I just wanted to know how many ways we can invoke JSP Page from BPM.
    1. BPM Interactive component call
    2. ?.
    Thanks
    Sunil.

    When you are using a jsp, its for user interaction only. and in any case, you require interactive component call.
    this is the only way you can use a jsp in OBPM.
    However, in a bpm interactive activity - you can also choose external as implementation type.
    For this, you need to have your jsp source code reference added as an external resource in the project and the external resource is to be specified at configuration while setting implementation type.
    HTH
    Sharma

  • How many voice messages can be stored on Skype?

    Hi,
    1. I wonder how many voice messages can be kept on Skype account?
    2. How long can be one voice message?
    Thanks

    You have to consider the comression though Ron, when you say that a nano will fit a thousand three min songs this is at a bitrate of 128kbs, with audiobooks you buy from say audible for example, they have four quality settings the highest being format 4 which encodes is 32kbps, this is fine for simple speech but would be terrible for music.
    So with this in mind such a low bitrate would use on average four times less space, so 50 would go way upto 200. But some of the books I listen to are upto 40 hours long!, anything as small as 3 hours would likely be a crappy abridged version which is no use to anyone.
    Also remember that you won't really need to keep more than 1 or 2 books on there at once, I mean why would you want to keep a whole library on there when they can just sit on your PC incase you ever want to listen to them more than once.
    Personally I use the highest bitrate possible for my audiobooks, such as 80 or 128, just depends what bitrate the file I have are in, I never need the space because I have few songs and only put one book on at a time.

  • How many 7920 phones can be supported on one Cisco 1131AG access point?

    hi all,
    who knows that how many 7920 phones can be supported on one 1131ag AP? Thanks a lot...

    Hi Alomar,
    Hopefully this info will help;
    Number of 802.11b Phones per AP
    Before any discussion about network planning can take place, it helps to understand the basics of the overall network capacity.
    The following network capacity guidelines apply to sizing the Wireless IP Telephony network:
    No more than 7 concurrent G.711 calls per AP.
    No more than 8 concurrent G.729 calls per AP.
    Note These design recommendations assume that Voice Activity Detection (VAD) has been disabled on the Cisco 7920 Wireless IP Phones. Use of VAD on the Cisco 7920 phones can conserve bandwidth, but Cisco recommends that you disable VAD on all Cisco CallManager servers to provide better overall voice quality.
    In addition to determining how much bandwidth is needed for an 802.11b VoIP call, you must also consider overall radio contention for a particular RF channel. The general rule is that you should not deploy any more than 20 to 25 802.11b endpoints per AP. The more endpoints you add to an AP, the more you reduce the amount of overall bandwidth and potentially increase transmission delays.
    The maximum number of phones per AP depends on the calling patterns of individual users (based on Erlang ratios). Cisco recommends no more than 7 concurrent calls using G.711 or 8 concurrent calls using G.729. Beyond that number of calls, when excessive background data is present, the voice quality of all calls becomes unacceptable.
    From this doc;
    http://www.cisco.com/en/US/products/hw/phones/ps379/products_implementation_design_guide_chapter09186a00802a0a05.html
    Hope this helps!
    Rob
    Please remember to rate helpful posts.....

  • How many iPad devices can I sync at once to a mac

    Hi
    I am trying to establish how many iPad devices can you simultaneously sync at once with a mac?
    If anyone could provide this information I would be really grateful.
    Many thanks
    eAutomotive

    Several users have also maderecent  reference to the iPad in education web site...it's located here
    http://ipadeducators.ning.com/
    and has alot of great information.  They make reference to the following website, that contains detailed instructions on setting up and syncing multiple iOS devices. 
    http://www.techlog.ca/ipad-deployment-ios-5-upgrade-strategy-and-steps/. This information is very valuable. 

  • I want to buy the special complete for 49.99 per month. if I buy this, how many computers I can install since I have two computers?

    I want to buy the special complete for 49.99 per month. if I buy this, how many computers I can install since I have two computers?
    only one computer or two? Please let me know. 

    Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
    -Windows or Mac does not matter... 2 on the same operating system, or 1 on each

  • How many mails i can send at a time per day using APEX mail system?

    HI,
    I am working on application, when i have written a process to send mail, i have a project where i have to send mail at a time for all the email id's
    given list there are upto 5000 email id's where text body also include certain set of data from a report. thinking at a time 3000 its difficult i divided
    it region wise, but still each region have 2000 odd email id's. during testing when i run the process just 950 mails i could send then i got a error
    saying "ORA-20001: You have exceeded the maximum number of email messages per workspace. Please contact your administrator." so please
    can any one help me to know How many mails i can send at a time per day using APEX mail system?
    Thanks in advance
    Gowthami

    Hi jfosteroracle,
    You are getting the error may be the following reason,
    Check the following,
    Login as ADMIN and Goto -->Manage Instance-->Instance Settings--> Mail-->Maximum Emails per workspace
    Actually this number denotes the Number of mails can be sent per 24 hour for the workspace,It may exceeded.
    It may be the reason.
    Thank you.     
    Regards,
    Gurujothi
    Edited by: Gurujothi on Jun 27, 2012 5:54 AM

  • How many key fields can we have in a DSO?

    Hi,
    how many key fields can we have in a DSO.is it 16 or any number of key fields can be used? If only 16 are allowed pls let me know how to add more key fileds (my requirement is 21 keyfields) .
    Thanks in advance,
    Praveen

    Hi,
    Thanks for the reply. Pls let me know the procedure to include 5 more key fields because i have 21 keyfields which i have to use.
    Thanks&Regards
    Praveen

  • How many key fields can we maintained in dso or ods

    HI
    pls let me know how many key fields can we maintained in DSO or ODS.
    Thanks and Regards.
    ASIM.

    Hi,
    Key fields can only be 16 you cannot exceed this. but if you have more key fields, you can combine fields using a routine for a key field
    Max Data Fields - 749 data fields can be added in a DSO.
    Regards,
    Marasa.

Maybe you are looking for

  • How do I authenticate my external hard drive?

    I've been using my external hard drive for a few months now without any problems opening, saving, or moving files. Just recently I had a new hard drive put into my MacBook and I used the Migration Assistant to transfer my latest backup over to the ne

  • HR get Simulation Data IT 553 "calculation of Service" for imputed times?!?

    Hi guys! what i need are the calculated times for a person. How these times are calculated is quiet complicated and defined in customicing. when you add an Infotyp 553, you can go to simulation. There you can get the Data "Table of inputed times". Is

  • Applying music to slideshow

    In idvd if you have for example 6 hours of music but 3 hours of pics for a slideshow, is there a way to loop the slideshow to the full 6 hours of music. I have tried it, but cannot get the music to continue without it starting over when the pics of t

  • My itunes library keeps disapearing, from when I close down my computer and then restarting it

    On my laptop i have created my music library, and each and every time, I switch my computer off, and then re start it, maybe a day later the library does not exist. Why is this??

  • Spell Checker Service in the Portal

    Hello, Please let me know if this is possible. Do we have anyone who was sucessful to incorporate spellchecker service in publisher. If Yes, Can you please let us know how this was achieved? I was able to incorporate a third party component but was r