How many TFTP servers should I have turned on in UCM?

I have a 7 server cluster on UCM running version 8.5x with over 3,500 devices. My question is should I have TFTP turned on on all my subscribers and if not where should it be turned on? Maybe just a server and a subscriber?
Thanks in advance for any replies.

I think the SRNDs recommend dedicated TFTP for over 1250 phones.
In real life, it's no big deal. Some deployments we have TFTP/MOH dedicated VMs, but often we don't.
If a phone can't find the TFTP server when it boots, it will use cached data and register anyway, so fault tolerance isn't a major issue.
During upgrades you generally have plenty of time pencilled into a maintenance window so unless minimising endpoint downtime is a big priority there's not much to be gained.
Aaron

Similar Messages

How Many Application Module should I have ?

Hi All,
Could you please share your experience...
I am developing a ADF Faces + BC application, how can I determine how many application module should I have ?
I have modules , i.e :
Sales
AR
Inventory
Purchasing
GL
Can I say that I should have 5 application modules ? ( one for each module ? )
Thank you for your info,
xtanto

Its difficult to know if 80 is too much or jus right...The danger is that if you have many application modules, and for example a particular UI page requires you to manipluate data in many application modules then this has potential to be "overkill"...each AM requires a check out from the AM pool and database connection etc. etc. etc.
If you need to manipulate many app modules on a single UI page if you were to nest these application modules then this might be more reaslistic...However, if a couple of UI pages requires manipulation of only one app module this sounds reasonable...
I dont know if that really helps you
So if on pages A, B and C you maintain Sales Order (which is one app module) then thats ok.
If in pages X, Y and Z you manipulate Quotation (which is one app module) that would be ok as well.
If the use case is that in page F, G and H you maintain Sales and on page J you maintain Quotation then you might want to nest one inside the other.
If your use case is on screen K, L M, N, O, P and Q you access 4-5 different app modules then that would raise a concern with me...
Again, don't know if that helps,,,
One way of lookin at this is to create your VOs based on the way you want in the information to appear on your pages and from those pages think about the "uses case" and create your app modules based on those use cases...
Does that help?
regards
Grant

How many XI servers should require?

Hi Experts,
In real time scenario..how many XI servers should require? and How many SLD's?
Shall we maintain the same XI system for Dev and QA or else separate systems.
And also once done QA then how to send this to Production?
My mail id:[email protected]
Thanks in Advance.

Hi,
You Can Maintain One SLD . this is Preffered
You Can Maintain Separate Servers For DEV QTY PRD
Transporting ---
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --Overview of Transition from Dev to QA
Reward Points If Helpful
Regards
Sesh

How many parallel servers should I use?

Hello All,
I am in 10g and would like to create table as select. I am using NOLOGGING and PARALLEL. I notice, as I go on increasing the number of parallel servers, I cost of my statement reduces.
create table tmp_xyz NOLOGGING PARALLEL 12 as
SELECT ...
from ...
value of PARALLEL_min_SERVERS and PARALLEL_MAX_SERVERS parallel servers is 0 and 240 respectively.
I am doing this for a large data table migration; no user be working at the time.
I wonder how many parallel processes I should use?
Regards

Mosaq wrote:
I wonder how many parallel processes I should use? Each parallel process is used for doing I/O - the I/O load is what is parallelised. Each PX slave gets an I/O load (usually a rowid range that describes a range of physical row-on-disk addresses) to process.
So your question boils down to what the I/O capacity is of the I/O subsystem on that server. And this is pretty unique to a server and depends on just how the I/O layer looks like.

How many Aperture Vaults should I have??

Does it make sense to have more than one vault? The vault works more like a one time snap shot of the library correct? Unlike time machine backups that will only sync new data and changes. If my Aperture library is 100% up to date today, should I only keep one vault with today's date? I am trying to organize my external drives and I currently have two vaults set up. I am thinking that my logic is correct on only needing one, but would like some feedback... Please advise. Thanks!

A vault on separate portable drive, different from the drive where your Aperture library is, does sound good.
In the long run however, you may want to consider to have two backups. Drives are no longer that expensive, and photos are precious memories that you will not want to lose. Accidents will happen - I once had a power failure, that killed both the internal drive of my mac and the backup drive at the same time, while I was doing the backup. Without the second backup my photos would have been gone.
I am not sure, why you want to split your library in an older library and a library for the newer pictures. The size of an Aperture library is not critical with respect to performance. I would only split the library, if you are very sure, that you will never want to use images from before 2012 in the same products as images taken later - in a slideshow, book, album, web page, etc. For example, I create often slideshows with wildlife pictures, and these include images from many years and different regions of the earth. So I like to keep all my photos in one large library.
Regards
Léonie

How many Indesign Versions should I have on my PC

Hi everyone,
Just a quick one. I have recently upgraded to CS3, however I still seem to have all of the CS2 suite installed on my PC.
Is there any reason I shouldn't uninstall CS2?
Thanks in advance..
Ben

* It doesn't take up any space you desperately need, does it?
* Don't upgrade all your CS2 documents to CS3, just for the hell of it. The extra features makes working in CS3 easier, but only (well, mainly) if you started the doc in CS3 as well. For existing docs, keep it safe, in CS2. You never know.
* One features that has gone from not-that-bad to b-a-a-a-a-d (as I experience it) is Word import. Some documents do not import at all in CS3, while they import flawless and speedy into CS2. Save that, open in CS3, problem solved.

SBS 2003 to Server 2013 migration - How many virtual Servers?

Hi
I need to replace our SBS2003 - we are about 10 users. We use it for:
AD
File/Print
Exchange
SQL
WSUS
Subversion
TrendMicro WFBS
Since there is no current follow up product I feel like I need to setup:
Server 2012 R2
Exchange 2013
SQL Server 2012 Express
I found inconsistent information on how many virtual servers I will need. Is it correct that in contrast to SBS I must have multiple (virtual) servers?
What is best practice for this scenario (# of VM's, "what" goes best with "what", sizes ..)
Thanks a lot for your help .. I have a very good knowledge about the SBS2003 but unfortunately not about the later Standard Server Versions.

Well.. best practice would suggest,
1 VM - DC
1 VM - Exchange
1 VM - SQL
Reality though, suggests they may not be required.
What do you 'need'?, is a better question.
Can you move to hosted exchange?
You can certainly use the Hosted Trend Micro AV product which removes the requirement to run a console on your server.
Perhaps 2 VMs would be sufficient a DC, and a second to host your applications and WSUS.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

How many managed Servers do you need?

Hi,
One thing that has come up time and time again, is when trying to think about a new project and a new WL domain, is trying to know how many WL Managed Servers do you need?
Does BEA have some sort of metrics which says ok for this amount of input we recommend you having 4 managed servers on 4 single boxes?
And is there think on have 2 managed servers on 1 box or 2 managed servers on two boxes?
Any Help Appreciated.
Kind Regards,
Alistair.

Hi :-D
I don't believe BEA have guide lines on how many Managed servers are required based on Metrics. You could look at some performance evaluations but it's really only relevant if your application acts in the same way.
Cheers,
Doug.

How many Story Lines may I have ?

Hello everyone!!!
So, I'm a musician and I wanna make music videos to youtube (just like thousands of other people do)...
Wanna make my videos with FCP X...
I saw some videos (tutorials) on youtube about tips and tricks on FCPX... Problem is that at any video (tutorial) I watch there's only a main story line...
On some videos I may see the main story line and a secondary track above...
Once I saw a tutorial that I can transform the secondary line into a story line - and then it will act just like my main story line.
What I want to point out is that as a musician and making a music video, I would need maybe 6~9 story lines (for all instruments and stuff)... Because spliting the videos and sycing them over and over again would be annoying... It would be a lot easier if I could just have how many story lines I want, have them all sync and then just split the videos...
(Hope I was clear enough, english is not my main language, sorry for that)
So, to simplify, my question is: How many story lines can I have in FCPX ? (at least 2 I know I can have 'cuz I've already seen this on tutorials, wanna know if it is possible to have more than 2 or if 2 is the limit)
Thanks already everbody!!

Salivan, you can have as many storylines as you like.
What you need to do is place your first or main instrument I the primary storyline. Add your second instrument as a connected clip, and turn that into a storyline by selecting it, right click & select create storyline.
Now there is no reason why you can't add another connected clip above the secondary storyline, and place that clip or clips into another storyline.... and so on

How many application servers in a company

Hi experts normally in a mnc company for example IBM bangalore,
how many application servers in the company and how many clients
connected to each server.
Regards,
Neelima

Consulting Companies like IBM can have any number of testing servers (sand-box). Every Client operate own their own servers (90%) or sometime they host servers at SAP AG Space.
In general clients operate on 4 serevrs Dev, Quality, Production, and sand-box. But servers can be of any number depending on project size, like clients prefer to mainatin sperate BI (dev, qua & prd) servers for CRM/SRM/R-3.....it totally depends on requirement of usage for client. But yup minimum servers required is 3, though some client also work without quality servers.

HOw many Depriciation Key we can have Maximum

HOw many Depriciation Key we can have Maximum

There is no hard and fast rule as to how many. Usually there are a number of keys that would post to FI/GL from depreciation area 01. Then there are other keys for tax/reporting purposes. Many are dependent on country specific requirements/laws.
The country specific charts of depreciation that are supplied by SAP contain the more common depreciation keys that are used. If you need to modify them, you should make a copy of the standard delivered key and then make your changes.

How many key fields can we have in a DSO?

Hi,
how many key fields can we have in a DSO.is it 16 or any number of key fields can be used? If only 16 are allowed pls let me know how to add more key fileds (my requirement is 21 keyfields) .
Thanks in advance,
Praveen

Hi,
Thanks for the reply. Pls let me know the procedure to include 5 more key fields because i have 21 keyfields which i have to use.
Thanks&Regards
Praveen

I'm a school tech coordinator. Many computers and many iPads. How many Apple IDs can I have per device, and how many devices can have the same Apple ID? To make my life easier, I'd like 200 devices to all use the same Apple ID.

I'm a school tech coordinator. I have many computers and many iPads. I apologize if there is a some place that has all the rules governing the use of Apple IDs. I looked, and I even tried to get the answers from multiple Apple rep's. I couldn't find the answers.
How many Apple IDs can I have per device?
I want to use the same computer to sync and backup many iOS devices. The iOS devices would be associated with different Apple IDs.
I may load apps under a school Apple ID and have users load their own apps under thier own ID.
How many devices can have the same Apple ID?
Can I use the same Apple ID on all the computers in a lab?
Can I use the same Apple ID on all iPads for a particular grade level?
Are the rules different for iOS devices and computers?
I know that there are limits on "authorize" and "de-authorize" and how frequently those things can be done.
Recently I heard that for the life of an iOS device, it can only be associated with five Apple IDs. That is not good for a school giving iPads to students in a 1:1
To make my life easier, I'd like 200 devices to all use the same Apple ID.

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html
It would be best to address your questions there, especially since this is a public forum, and over there you could post more private issues with this set-up. Not to mention, getting more official answers.

How many motions tweens can you have on a timeline?

I'm a college student in Seattle. We just had our mid-terms in Flash CS5. One of the really simple questions was "How many motion tweens can you have on a timeline." Yup. The answer is one...... or is it? I had a long discussion with my tutor (who is the greatest tutor in the world) and he wanted to think about it. I said to him that I thought that one motion tween was wrong because you can click on an object in the timeline, make it a motion tween, and double click it and make several motion tweens. So, essentially, you can have more than one motion tween on a timeline. Is anyone able to advise me because this is all about grades!

You can have quite a few motion tweens on a timeline. You can even have them happening simultaneously (I don't know of a specific limit), as long as they are all on their own layers. Though the more you add simultaneously the more they can weigh down the speed of things running.
If you need to prove this to someone, the easiest way is to create it and demonstrate it. But you may want to check the exact wording of the question... it would not be beyond an examiner to throw a trick question in.

How many ADFS farms can you have in a single forest/single domain?

Hi
I may have some terminology incorrect...please let me know if I do. :)
My question is, how many ADFS farms can you have in a single forest/single domain? If you want to know why I am asking...please read on.
We have 1 ADFS Farm and we are looking adding services to it. However not every cloud vendor provides a "Identity Broker" with there services.
We have a consultant that is advising that we need to enable a SAML-based IdP-initiated single sign-on (SSO) ie using "IdpInitiatedSignOnPage"
However to do this we need to modify the ADFS website to have "drop down" list so the user can select the "Relying Party" and then authentication with them.
This means we are exposing a list of every company/party we have federated with. The exposure of this information, is deemed a security concern by our company....which I agree with.
So the consultant advises that we need a separate ADFS farm. I have searched online, but haven't found any information that confirms multiple ADFS farms can be implemented in a single forest/single domain.
Thanks for reading and if you have any other suggestions...I'd appreciate it.
Nyobi

This is not exactly FIM related question - there is ADFS forum available on Technet. However - technically there is no limit of ADFS farms in a forest \ domain. It is just a service which uses AD and is not altering it in any way or storing some forest-wide
information like Exchange. So you can setup two ADFS services in single forest - no problem.
If it is a best solution to your problem? I can't say with that limited information but maybe just customization of pages on ADFS side would be enough?
Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl

How many TFTP servers should I have turned on in UCM?

Similar Messages

Maybe you are looking for