How many track inputs can interface with garage band.

Im going to buy and interface for recording multiple microphones. How many will garage band accept?

Ben, do the letters RTFM ring any bells? There are hundreds of pages of tutorials at www.line6.com - check them first and then come back here if you
are still stuck.

Similar Messages

  • How many systems we can sync with iphone

    how many systems we can sync with iphone

    You can sync contacts etc with one computer but if you enable manual syncing of music you can copy from multiple computers, see the bottom of this page…
    Manage content manually on your iPhone, iPad, and iPod - Apple Support

  • How many systems we can sync with ipad

    how many systems we can sync with ipad

    You can sync contacts etc with one computer but if you enable manual syncing of music you can copy from multiple computers, see the bottom of this page…
    Manage content manually on your iPhone, iPad, and iPod - Apple Support

  • Can I use a MOTU 828mII interface with Garage Band

    I have a MOTU 828mII interface and I want to use it with Garage band. How do I set it up?

    You should be able to no problem . I might be speaking to fast .. Now you didn't say what your weapon of choice was. An iMac or what.  I use a MOTU 128. With an iMac.
    As I remember you install the software for you MOTU unit. Then go check for the newest driver and install it.
    Now for G.B... look in the preferences for GB ..  Look at the Audio/ Midi settings. There you can select the unit you want.
    Peace ...

  • How many jobs we can define with DBMS_SCHEDULER maximum?

    Hi,
    We have created a program which helps us to make trend analysis. It extracts tables which we want and calculate the variance between that tables. We do that extraction jobs by using DBMS_SCHEDULER package.
    I would like to learn that how many jobs i can define using DBMS_SCHEDULER package.
    Thanks

    Hi !
    I don't think there is a limit for number of defined jobs , but there is a limit of 1000 jobs ( slave processes ) to run concurently.
    T

  • Can you use an mbox mini as an interface with Garage Band ipad? How?

    I would like to use external d/a interfaces as an input to garage band on an ipad, but don't know how to connect them and set this up in Garage Band.
    I have access to an mbox mini and a MOTU 828 mkii.  Any help on this?

    Thanks for the response!  ...I may be trying it soon

  • Is there a limit as to how many devices you can connect with Edge Inspect?

    Is there a limit as to how many mobile devices you can connect with Edge Inspect? 
    Also, do we need a dedicated wi fi hub for all these devices? Are there any wi fi limitations with connecting more than 20 devices and connecting to wi-fi?
    Thanks

    The free version of Edge Inspect limits you to connecting to one device concurrently. (You can certainly disconnect from that one and connect to another if you wish, but it's just one at a time.)
    If you purchase an Edge Inspect subscription, or have a paid Creative Cloud membership, then you can connect an unlimited number of devices concurrently. (Note that I have seen up to 35 connected at once.)
    For info on purchasing options, see this blog post: http://blogs.adobe.com/edgeinspect/2012/10/23/how-to-purchase-edge-inspect/
    It does not have to be a decicated wifi router, although it certainly can if that makes sense for you. For example, at my home I have a single wifi router that I always use for my laptops and video streaming devices, with my desktop computer connected to the same router on Ethernet, and I can connect my 5 tablets and 2 mobile phones to Edge Inspect on the same router with no issues.
    My router says it can support up to 250 connections at once (Ethernet + wifi); however, I have nowhere near that many devices so I could not put that to the test. I think a more reasonable limit is around 30; however, that is just based on having to share bandwidth. You might want to check what your router says is its limit.
    Just keep in mind that the more devices you have downloading data, the slower the performance will be.

  • How can Roland BK-7M interface with Garage Band?

    My MacBook Pro recognizes that there is a midi device connected to it, but in can't sort out what the decice is or receive a signal.  I've tried to upgrade the driver on the Roland but that doesn't seem to be happening either.  What settings do I need to adjust in order to get these two units to communicate with one another?  I need your wisdom.  Many thanks.
    William

    Ben, do the letters RTFM ring any bells? There are hundreds of pages of tutorials at www.line6.com - check them first and then come back here if you
    are still stuck.

  • TS2734 Is there a limit to how many devices I can see with one account?

    Our school district, has numerous ipads..we have set up the find my ipad on each one is there a limit to the number of IPADS i can register under one account to locate the ipads with the icloud?

    From what i've read on here that SR102 Hub is only capable of accepting 20 wireless connections(might even be lower and just 16) anymore and it can cause devices to loose connection or just not connect at all.
    There is as of yet no way around this limit with the hub( you could purchase a wireless access point or a better router to piggyback onto the hub which might help). Edit the intial number of connection i stated may be wrong so i've adjusted the figure.

  • Is there a limit to how many devices I can sync with icloud?

    Just about to get ipod touch 4thgen and don't know if i can sync my ipod, mac and PC with ICLOUD !?!
    PLEASE HELP!! Thankyou

    Thanks

  • How many GRs we can post with one PO.

    Hi friends
    i am using 4.7,i created a PO with some qty of stock,but my vendor is delivering less stock than mentioned in the PO.while doing MIGO,w.r.t. PO in the deleivery note we r maintainig the qty which he sent to us.but when we check the stock with MMBE stock is shown as the PO mentioned not in the delivery note.can we do again MIGO for the undelieverd amount of stock which he sent to us later w.r.t same PO number.

    Hi,
    As you are saying in MMBE stock overview it is showing full PO quantity, this means in the first GR itself you have received entore PO quantity, but not delivery note quantity.
    I think while doing GR in MIGO you have done a mistake, by entering received quantity only in Qty in delivery note tab, you should change the qty in Unit of entry also to the same delivery note quantity. System proposes entire open PO quantity in this filed, you should change this to the quantity received.
    Now first you need to cancel the GR using MBST or MIGO with reference to the GR material document.
    Then create the GR with correct quantity received as per the delivery note. then you can see the correct quantity in MMBE stock overview. Next time when you receive the balance quantity from the vendor, again do GR in MIGO with reference to the same PO. Here system proposes the balanced quantity (total PO qty - Previous GR qty). If you receive anything short enter the same in both qty in unit of entry and Qty in delivery note.
    Regards,
    Ramakrishna

  • Is there a limit to how many devices I can use with wifi / fibre?

    We are a large household and might have 8 people connecting laptop/TV/phone to wifi / fibre at any one time. Is there a limit / recommended maximums and is it wifi/router or the internet itself that is the controlling factor?Any advice much appreciated.

    Is there someway of increasing the number of devices connected?Mark39 wrote:
    From memory, I believe Sky routers will permit a maximum of 16 wireless connections. The number that it's practical to connect really depends on the way they're used and your available bandwidth (broadband speed) as it will be shared between all the connected devices. If your available download broadband speed is 5Mbps, 8 connections are likely to be pretty slow. 

  • Need help with Garage Band 11 and my TASCAM interface recording Real Instrument

    I am using a TASCAM US-122 interface with garage band 11 on a mac at 32 bit running osx 10.6.6.  Garage Band preferences / audio input and output set to TASCAM (which means it recognizes it) , but when using Real Instrument for the TASCAM and the track is armed , etc... the record function works when started except "no sound" from the device I am running thru TASCAM is being detected.
      I am getting sound out of the TASCAM and simply running an AKAI mpc beat as a test.  I am sure there is something simple I have yet to do but not sure what it is in Garage Band. 
      Can you help ?   Thanks. GARY

    with the real instrument track selected...
    make sure the info pane is showing on the right (click the little "i" on the bottom right to open it; "Real Instrument" should be highlighted in blue on top).
    On the bottom of the info pane it says "Input Source" and "Monitor."
    Make sure the Input Source is set to the Tascam channel you're using (the channel, mono or stereo, that you've plugged your MPC into).
    And if you want to hear it as you record, make sure the Monitor is set to ON.

  • M-Audio Ozone compatible with Garage Band?

    I'm trying to set up a very basic setup so my father can mess with Garage Band. Does anyone know if the M-Audio Ozone is compatible with GB? I'd like to be able to use the microphone and DI inputs as well as the midi functions. Thanks for your help!

    I have never used one but there should be no reason why the Midi and audio interface would not work. I don't think the control surface part will have full function, not that is a big deal.

  • HOW MANY TRACKS CAN I GET BEFORE MY COMPUTER STARTS ACTING UP??

    How many tracks do u think i can run b4 my computer starts not being able to handle it? I have 768 Megs of ram and a dual 1GHz, and a 80 gig HD. And Im talking vocals, music and efx all seperated on there own tracks?

    Yea I can get 24 tracks easy with no problems I was just hoping I could get another 24 tracks with no problems, but that might be wishful thinking...Do u think if I blow my memory out to 2 gigs Ill have and easier time? I plan on doing so anyway. My 80 gig HD turns at 7200 rpm , my memory is at 768 right now, I havent tested it yet but I hope it works..lol Would it be easier on my computer to run logic on a seperate hard drive?

Maybe you are looking for

  • Taking too much time to connect SAP B1

    Dear All, My Addon is running successfully in one server. While the same Addon is taking too much time to connect ( near oCompany.Connect). Can anyone give me any idea regarding this.. Thanks in advance.. Regards Sanjay

  • IPhone Cable....(dangerous?)

    Is anyone else having this problem with their iPhone cable? The wires are starting to show on mine and I don't really move my syncing port that much, only when I travel, I roll up the cable. Is this dangerous?

  • Down payment role authorisation

    Hi all, The user wants to change the description of down payments. so I want to assign a role authorisation for T code FB02 only for down payment section for this user, because in FB02 can change all FI documents. please suggest what are the document

  • Convert Date Object to Calendar object

    Hi, I have a Date field in my webdynpro application, I need to to read this from my current context and convert the same to a Calendar field and pass it to my model. Calendar date = CalendarConverter.parseDate(req_date.toString()); The above code giv

  • Track Ball Mouse?

    Used FCP for 9 Years.  I love my Kensington Expert Trackball Mouse. Doesn't work with Lion. Any recommendations as to a trackball that will?  And yes, I've been researching the net.  Just thought I'd poll the FCP community:) Thank you in advance, She