How many usb ports does this notebook have

I wanna buy hp pavilion g6 2305tx.but the problem is that it has only 2 usb ports.But i contacted a dealer and he told me that there are 3 ports.is it true ?please give me hands on review.and is it safe to use usb hub in the laptop ?Please inform me.Thanks
This question was solved.
View Solution.

Hi:
According to the user guide at the link below, chapter 2, pp 3 - 5, there is one USB 2.0 port on one side of the notebook and 2 USB 3.0 ports on the other side of the notebook.
http://h10032.www1.hp.com/ctg/Manual/c03529460.pdf
I do not own a g6 model notebook so I cannot provide any further information regarding it.

Similar Messages

How many usb ports (if any) does the 30 inch display have?

I am getting the new mac pro I know apple is going to kill the 30 inch display but as they have not done so yet I was wandering how many usb ports does it have?

Hi macnewcomer22,
Instead of buying the Apple 30" Cinema Display, for not much more you could buy the NEC Multisync 3090WQXi, which incorporates later technology and was awarded Best in Show at MacWorld.
The Apple 30" is a good display, but the technology is about 5 years old, and later models from other manufacturers, noticeably NEC, have surpassed it:
http://macperformanceguide.com/RecommendedDisplays.html
http://www.pcpro.co.uk/reviews/monitors/242010/nec-multisync-lcd3090wqxi
I purchased the standard Multisync version, without the Spectraview II software, in July 2009, and I have found it to be excellent in all respects:
http://www.nec-display-solutions.co.uk/p/uk/en/products/details/dp/Products/LCD/ Current/LCD-3090WQXi/LCD-3090WQXi.xhtml?e=e1s1
Although most resellers only stock the 3090WQXi in black, it is also available in a silver finish, which looks great alongside a Mac Pro.
Regards,
Bill

How many DMA Channels does my device have?

I would like to know how I can find out (progammatically) how many DMA channels my device has. I am using the DAQmx driver. Other than with the traditional DAQ I can't find out anything about my device but the "type" and the "serial number". Where can I get some more details about the device (not in the MAX - I want to know it in my program) with DAQmx?
My intention is to find out how many DMA Channels the device has and depending on how many Channels I need - I am using "interrupts" instead of DMA.
Somewhere in the KB of Ni was written that the NI-DAQ 6.9.... realizes automatically how many DMA Channels are available and how many I would need - and so he takes "interrupts" for the rest.
It seems that they did a "step bac
kwards" because with the NI-DAQ 7.2 it doesn't work automatically if I need DAQmx VI's.
Does somebody know anything that would help me to solve this problem?
Thanks.

Sorry! I posted my first revision of the answer.
Here is what I meant to say:
Hello,
According to this KnowledgeBase, DAQmx and Traditional DAQ behave the same. Are you seeing something different?
As far as a workaround goes, all you have to do is trap the No DMA error. This error should be -200251. So in software, if you receive error -200251, then you need to configure the board to use interrupts, and then start the task again.
How to configure the board for interrupts differs from the four different DAQmx API�s (C, C++, DotNET, and LabVIEW). If you are unclear about how to do this in your environment, please let us know, and we can find
out.
Best regards,
Justin T.
National Instruments

Does anyone know if the new ipad air has a usb port. This is the only downside to the ipad to me? My samsung galaxy tab has 2. 1 being a micro usb. Great for connecting to the tv. Thanks, greenlady5.

Does anyone know if the new ipad sir, not yet available will have a usb port? This is the only thing that is prevented me from purchasing so far. Doesn't make sense when you can connect to tv.
ggreenlady5.

The standard external connection and charge port on all recently-announced (October 2014) models in the US is the Lightning connector, introduced with the iPad 4 in Sept 2012. http://techcrunch.com/2012/09/12/apples-new-lightning-connector-what-it-does-and -doesnt-change/
This includes iPad Air, iPad Air 2, iPad mini, iPad mini 2 with Retina display and iPad mini 3.
https://www.apple.com/ipad/compare/
NOTE: The original iPad (2010), iPad 2 (2011), iPad 3 (early 2012) came with a 30-pin connector, also common to original iPhones and iPods.
Additional adapters are available to connect TV's, cameras, SD memory cards, and similar devices, from many sources, including the Apple Store online. (Adapters are still available for the older iDevices using the 30-pin connector as well)
http://store.apple.com/us/ipad/ipad-accessories/cables-docks
Some common Lightning adapters available from Apple online:
Lightning to USB camera connector with a 'standard' USB cable.
http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter
Lightning to HDMI adapter (requires an HDMI cable as well as this adapter)
http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
Lightning to micro-USB connector
http://store.apple.com/us/product/MD820ZM/A/lightning-to-micro-usb-adapter

I bought a Power Mac in March, 2008. Does this machine have WiFi capability? If it does how can I initiate WiFi?

I bought a Power Mac (Mac Pro?) in March, 2008. Does this machine have Wi Fi capability? If it does how can I initiate Wi Fi?

Look on the MenuBar. A Mac with no Wi-FI will shows a distinctive completely grayed-out Wi-Fi Icon (not just a black outline.)
Or look in About this Mac > ( More Info ) > Report > system report > Network > Wi-Fi
Installed Hardware always shows the many channels available. If none are listed, you likely do not have the correct adapter installed.
These adapters are available on the Used market and Amazon. Installation is fussy because everything is so small, and there are several antenna wires to attach correctly.
There are two models, and most sellers know which Macs they apply to. Installing the wrong one sometimes means you cannot do a software Upgrade.

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4. Question 1: Does this model have a PCI Express slot? Question 2: Can I upgrade my USB2 port in this laptop to a USB3 port? Appreciate your help & advice..

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4.
Question 1: Does this model have a PCI Express slot?
Question 2: Can I upgrade my USB2 port in this laptop to a USB3 port?
Appreciate your help & advice..

No & no.

How much more range does this have over the old time capsule?

how much more range does this have over the old time capsule?

Maybe 5-10% better in my experience, but it is impossible to say what your results might be until you try it out in your home.

USB ports does not work

Hi I have problems with not working USB ports. It used to work. I downloaded actual drivers at msi.com for my gaming notebook GX 60 Destroyer and now my USB ports does not work. What should I do?

What driver have you updated?
Try to do an EC firmware reset by removing the battery and the AC adapter then put the battery back with AC adapter attached.
Same questions like Pegasus asked, does all ports not working? which one exactly? What OS are you using?
Have you done any changes to the system? (for example: self-install OS or changing OS)

My USB Port does not Find my I POD

My USB port does not find my I POD. I have Installed all th elatest software.

Welcome to Apple Discussions!
Does the iPod show Do Not Disconnect? You may want to try resetting your iPod while it is connected...
http://docs.info.apple.com/article.html?artnum=61705
See if this link helps too...
http://docs.info.apple.com/article.html?artnum=61711
Finally, more details on the issue such as what your computer (if anything) does and what the iPod does.
btabz

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

Try leaving it plugged in and then restart the computer.
If you are on Windows this link may help but it is a bit old.
http://www.technologynext.org/error-usb-device-not-recognized-how-to-fix/

"iPad not charging Connect to a power adapter or a USB port on this mac to charge" Maverick issue!

Ever since we updated to mavericks our deployment of 60 iPad's flashes "iPad not charging Connect to a power adapter or a USB port on this mac to charge" on the screen every time one is plugged in. It is a false alarm because the iPad does in fact trickle charge and it does update the device like it is supposed to. At this point it's more of an annoyance then an actual problem. However I would like it to stop popping up every time one is plugged in.
Does anybody have any ideas to stop it?

Your computer USB port typically provides only 2.5W of power. iPads require 10-12W of charging power. That's why you get the "Not Charging" message. However, the iPad is charging, but much slower. There's no way to stop it.
 Cheers, Tom

How many OSPF Processes does a Cat6500 w/ Sup720 support?

Hi,
we've to build many vrf's and have to run
OSPF on each of these.
My question is, how many OSPF Processes does a Cat6500 w/ Sup720 can support?
regards
kf

Harold,
Thanks for the clarification. I hope you don't mind one more question. I have looked it up..http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_4/gtospfvf.htm
but it is not clear whether multiple vrfs can share the same routing process through the routing context mechanism. If this is not supported yet, then I wonder how scalable this is, and in particular whether service providers will view this as a viable feature considering the demand on resources on a PE router to run multiple (according to the document, depending on platform, up to 10,000!) ospf processes?
Regards,
E.

HT4407 How many GB's Does BootCamp take?

I Have got a MacBook Air from late 2011, and it's "only" got 128GB's discspace, then i wanted to hear about how many GB's does BootCamp Take?

Windows 7 specs out at a *minimum* free drive space of 20GB for the 64 bit version and that would likely be very tight for a working Windows machine. Given the limited drive space on an SSD (especially if you have the 128GB rather than 256GB drive) I opt for virtualization largely so I can retain one single drive partition rather than having to partition between Windows and OSX. That is, you can have a small Windows virtual drive and then share folders from OSX that will allow using the space as needed by each operating system.
Of course that requires buying Parallels or VMWare Fusion in addition to Windows, but I figure it's more than than worth it just for the flexibility it gives.
That said, on this 13" Air with a 256GB drive I have an "inherited" 80GB Windows 7 virtual machine (came over from the old MacBook Pro). On my 11" Air with a 128GB drive I opted to install a new virtual machine on an external SSD, but I don't often need Windows on that machine.
The main downside to virtualization is a slight loss of speed, especially on high end video intensive applications (meaning things like gaming). However the Intel video chipset in the Air is hardly optimal for that sort of thing to begin with, so I wouldn't have gone for an Air for a machine that was going to be dedicated to doing a lot of that sort of thing.

How do count how many 'A' s in this string using sql stmt?

hi all,
i have a string like 'AAAAARAMAAAAKRISHNAAAA'.
in this ,i want to find out how many 'A's .
how do find out this using select stmt.

(length(s) - nvl(length(replace(s, 'A')), 0)) / length('A')but consider (by modifying the question slightly to "how do count how many 'AA' s in this string using sql stmt? ")
SQL> select (length('AAAAARAMAAAAKRISHNAAAA') - nvl(length(replace('AAAAARAMAAAAKRISHNAAAA', 'AA')), 0)) / length('AA') x from dual
         X
         6
1 row selected.couldn't I argue that the result should be 10 as e.g. in
SQL> select * from xmltable('let $str := "AAAAARAMAAAAKRISHNAAAA"
                        let $search := "AA"
                        for $i in 1 to string-length($str)
                          where substring($str, $i, string-length($search)) = $search
                          return substring($str, $i, string-length($search))' columns x varchar2(10) path '.')
X
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
10 rows selected.Matter of definition I suppose .... ;)
btw. regexp_count also yields 6:
SQL> select regexp_count('AAAAARAMAAAAKRISHNAAAA', 'AA') x from dual
         X
         6
1 row selected.

How many span ports are supported on Sup2T and Catalyst 6880?

Hi,
I did not find any information concerning this.
Would be great if anybody could send me a link to the information how many span ports are supported on the new Cat68 series.
Regards
Thorsten Steffen

For sup2t
========
Local SPAN, RSPAN, and ERSPAN Session Limits
Total Sessions
Local and Source Sessions
Destination Sessions
Local SPAN,
RSPAN Source,
ERSPAN Source
Ingress or Egress or Both
Local SPAN Egress-Only
RSPAN
ERSPAN
80
2
14
64
23
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/15-1SY/config_guide/sup2T/15_1_sy_swcg_2T/span_rspan_erspan.html
Regards,
Naveen
****Rate if it is helpful****

How many usb ports does this notebook have

Similar Messages

Maybe you are looking for