How many users accept airport express?
Hello, all:
I own an Airport Express 1st generation and I was looking for an answer about how many wireless users can I have connected to it.
I was checking that second generation can allow 50 users at WIFI, so, anybody knows how many users support the 1st generation?
Thanks in advance.
the answer is 10 wireless clients
Similar Messages
-
How many generations of Airport Expresses is there?
So I recently bought an airport express. But now I'm a bit confused if at the store they sold me the latest generation- I'm not sure how many generations there are- is it only one or...?
On the box of mine its written: Airport Express
802.11n Wi-Fi - is this the latest one?
Thanks in advanceHello:
Short answer, yes. Apple does not designate "generations" of Airport Expresses.
Barry
Message was edited by: Barry Hemphill -
How far will the extreme reach and how many users can be on there at the same time?
How far will the airport extreme reach and how many users can be on there at the same time?
Last question first, since that is the easy one......approximately 50 (fifty) users for wireless depending on how active each user might be.
The first question is much more difficult, as distance is not really the issue with wireless.....obstructions are the issue.
A wireless signal can easily travel 300 feet or more with no obstructions in the signal path.
But, a typical wall of sheetrock or wallboard in a home will absorb....on average....15-20% of the wireless signal. Brick or adobe will obviously absorb much more. A ceiling....because it is thicker....will absorb about 25-35% of the signal.
So, if the wireless signal must pass through several walls and a ceiling, there won't be much, if any, of the signal left....even though the distance that the signal travels is not great...for example, 20-25 feet.
Other wireless networks around you at the neighbors can also affect the relative strength of the wireless signal.
The bottom line....locate the AirPort Extreme where wireless devices will receive a signal with the least amount of obstructions in the signal path. Your actual performance cannot be predicted in advance. You will not know how well the AirPort Extreme works for you until you try it out in your home.
If you find that the signal does not reach as far as needed, you will need to add additional "extenders", like an AirPort Express to provide more signal coverage. -
I want to check that how many users are connected to the wifi which i m using at present
i want to check that how many users are connected to the wifi which i m using at present???
Go to Utilities > Airport Utillity
If you click on your router it should show you the "wireless clients" that are connected -
How many users can view the same report at the same time in obiee answers
Hi All,
How many users can view the same report at the same time in obiee answers..?
What is max and minimum number of users.
Do we need to increase any system configuration.
Thanks,
Jagadees.Hi,
Many users can view report at same time.It depends on the server if it can accept those many users at same time.If number of users increases OC4J may not work properly.
Refer : http://www.artofbi.com/index.php/2009/10/what-is-oc4j-an-oracle-application-server-distribution-really/
Regards,
Srikanth -
How many users can you have on one account ?
Hi,
I have just created a ID with Adobe Reader for a group to use files stored in cloud. I would like to know how many users can access the account at one time via, mobile devices, ipad, desktops ?I don't know if there is a limit; you do mean the free https://cloud.acrobat.com/ ?
I will move your post to the Acrobat.com forum, where someone hopefully can give you a definitive answer. -
How to know how many users uses Report Designer?
Dear Experts,
Somebody knows if it's possible to know how many users have made look ups in Report Designer on one period or how many modifications?
Thanks in advance.Hi,
If the cube is checked for Statistics, there is a option settings for BI Statistics under tools, then all the user related info is stored in Techincal Content Cubes. Based on TCT(technical Content Cubes), you need to create a report based on the requirement. From then we can know user log info for the particular queries.
Hope this helped you
Thanks
PT -
How many users can 1 Xserve support?
I have one Xserve (10.5.2, 2x3GHz, 5GB RAM, 1.34TB RAID 5) that I want to support the following services for my SMB:
DNS, DHCP
AFP, NFS, SMB
Open Directory
Print
Software Update
I also want to have mobile sync'd network home folders, but only for ~/Documents and iCals and Address Books (I don't want everyone's MP3s or family photos).
I occasionally will use NetBoot/NetInstall, but only 1-2 users at once.
I am getting ready to migrate my company to OpenDirectory and 10.5.2 for all users and was hoping someone here might be able to tell me how many users I can reasonably support with one Xserve.
Also, is it a bad idea to have everyone using "mobile" accounts? It seems like it would be less strain on the server to have the occasional sync from users than everyone reading & writing all the time. Also, if anything happened, there would be a local copy and a remote copy of any files.
Thanks.Rosemarie,
BeehiveOnline currently supports 95,000 users and we have groups on the system as large as 10,000, that is probably about as big as we want to go - remember collaborating with 10,000 users is not an effective way of working - maybe a more open way of delivering content may be more appropriate. Given that the only issues we have with very large groups is the time it takes to run and the email traffic it generates as the large group are processed.
So it is possible to host 10,000 in a group but we need to be warned in advance and work with you to minimise the impact as the group is set up.
Phil -
How many Users online at any one time?
Is there any better (/more accurate) way of determining how many users are using Planning at any one time then "Administration >Application>Statistics"?
I've been using the Statistics up until now but it's hardly fit for purpose. The timings look dubious and the same users can be there 20+ times in the same list.
It's not a deal breaker, but would be nice to see if anyone else had any hints on this.
Regards
EdEven after a reset the numbers look very weird. Apparently it's been 6 weeks since I last accessed Planning... I should be fired!
Slightly off topic: My Supporting Detail Detection Cache Usage is at 100%, am I right in thinking I should DECREASE the cache size in the Application Properties as per the Documentation (http://download.oracle.com/docs/cd/E17236_01/epm.1112/hp_admin.pdf - P83)?
Sounds wrong to me.
Any ideas anyone? -
How many users for remote connection can I create, from support SAP
Dear all
I have a doubt with how many users can be created in my system ERP 6.0 for the remote connection, for the error product messages on the marketplace SAP,without this counts as user license.
I have not found any notes or documents from SAP to explain this.
I appreciate your help.
Best Regards,
ErikaOk...I will reply to myself. I can use more than 10 simultaneous connection, using vnc.
-
How many users are there of Logic?
does anyone know where I can find out how many users there are globally of Logic Pro. I'm doing an assignment on this and I can find sales figures for DAW software anywhere....
You can or can't find sales figures?
It is also rumoured that there are many non legitimate users out there too. Please note however, I am not one of those.
Anyway, what is the assignment for? ie What's the gist, requirements and subject matter? Just interested.
Regards,
Matt -
How many users does HFM support?
Hi,
how many users does HFM support(Maximum)? and why we are choose HFM compare to Hyperion enterprise?
thanks
Edited by: user10919054 on May 18, 2009 3:07 AMThere is no limit, as long as you pay for the licenses and make sure you have a robust system to support user connectivity and demand.
Hyperion Enterprise is the previous Consolidation tool most commonly used by many companies. Think of HFM as the "New Generation".... -
Hi,
Does anyone have any idea on how many users can be stored in the UME engine without affacting performance?
We have a current senario with about 200 portal useres, but are going to use the portal with more users in the future.
The users are stored in UME and mapped to the backendsystem (so basiclly stored to places)
I know it is better to hav a own reposotory I was just wondering what kind experinse you have with many users in the UME.
ThanksHi,
10,000 will not matter.
In our landscape we have 60000 user access the portal.
Only you have to keep in mind , when there is good number of user in system , you have to properly tune you system.
Your hardware sizeing should be upto in addition to that.
Can you tell me how many server nodes are there in you landscape or how many application servers are there.
Thanks,
Anil -
How many users can I import at one time?
Is there a limit on how many users I can import at one time?
Also, how about other record types (Lead, Opportunity, Contacts ...etc.) Is there a limit on these also?
Where in the documentation that I can find info for this please?
I'm using CRMOD Release 18
ThanksAccount
30,000
Account Team
50,000
Appointment
30,000
Appointment Contact
50,000
Appointment User
50,000
Asset
80,000
Campaign
50,000
Contact (Admin)
30,000
Contact (Personal)
2,000
Contact Role
50,000
Contact Team
50,000
Lead
30,000
Notes
50,000
Opportunity
30,000
Opportunity Product
80,000
Opportunity Team
50,000
Portfolio
30,000
Product
80,000
Service Request
30,000
Solution
50,000
Task
30,000
Task Contact
50,000
Task User
50,000
User
500
Campaign Recipient
50,000
Custom Objects
30,000
Dealer
80,000
Vehicle
80,000 -
How to see how many users are working on a Dynpro application?
Hello,
Is it possible to see somwhere at the portal or on the WAS how many users are currently working with my Web Dynpro application?Hi Roy,
I know it isn' exactly what you want but if you got to:-
System Administration->Support->Web Dynpro Test Tools->User Management
you can at least see the users currently running Web Dynpro applications (I think!)
At least its a start!
Cheers,
Gareth.
Maybe you are looking for
-
Hi. I have an iMac (21.5-inch, Mid 2010) using OSX Yosemite. Version is 10.10.2. My MAC mail app hangs instantly it is opened. The app doesn't appear on the screen at all. I need to right click the icon and force quit. The problem started around 3 we
-
Although I have a new MacBook, I also have an older desktop Mac OS X 10.4.11 (which I still use) that just recently "stated" the older Java plug-in has been removed and the newer version needs to be installed. The Mac OS X 10.4.11 doe not appear to
-
After i pause music. it resets to beginning of playlist
I listen to my music on my 4s every morning on the way to work for about an hour, and sometime during the day. After it's been paused for a while, when I go to listen again, it's starts "over". This happens whether I'm listening to a specific playli
-
I am trying to copy a portion of a previously burned DVD to a new DVD. The way I accomplish this is to use mgeg streamclip, and make a movie file, then use the movie file in iDVD. The downside is you are uncompressing and then recompressing a video s
-
I have a windows HP computer with windows 7 installed, when I try and update and restore my phone, I get an error message of there is not enough space on your computer to restore your phone. Any suggestions and help is appreciated.