HOW MANY VERIZON USERS ARE DISAPPOINTED LIKE ME?

Verizon's customer service is horrible they cant keep their word when they say they will call you back. I cant believe that the company with the BEST internet service and technology doesn't have an email or phone to file an official complaint.

I am disappointed because I feel I was misled to remain a customer. Most recently regarding this supposed XLTE roll out. I have lived in Tempe,AZ for two years now and I have experienced slow speeds, fluctuating signal (4G to 3G often)...just poor service and it seems to only get worse over time. Over the last 2 years there have been numerous trouble tickets, device exchanges and any trouble shooting method you can think of and the fact there has been no improvement despite all those efforts, it reveals just how bad their network really is here BUT I stayed with Verizon because I was told over and over the network will improve and Verizon seems to work well everywhere else (NM, NV, So CA) I was always told its a 'network traffic' issue that will be resolved soon.
Now that XLTE is supposedly upon us, I have seen no improvement and was told after the 'roll out' that I live in a 'marginal area'? Really? Could not tell me that two years ago? Wasn't this XLTE supposed to be the cure? You mean to tell me I went thru probably hundreds of factory resets and trouble shooting methods on each new/replaced devices for no reason? I purchased new devices and extended contracts because I was led to believe this manufacturers antennas are better than my phone at the time? I resisted joining another network because I was told over and over it is not a network issue, it is my phone? I continued to pay for numerous lines each month for 2 years because of ETF's and NOW that I am down to two lines you're willing to waive the ETF's because of my marginal area status?
Felt like I was ripped off for the last two years...paying top dollar for service that hardly worked where I spent about 90% of my time.

Similar Messages

How many concurrent users are allowed for an Azure Virtual Machine?

How many concurrent users are allowed for an Azure Virtual Machine?
Please share the details with the Azure VM size. Currently I have Standard VM of size D13(4 cores, 28GB RAM)

Hi SanPSK,
Thanks for posting here.
I suggest you to check this article for Azure VM size
https://msdn.microsoft.com/en-us/library/azure/dn197896.aspx
For the concurrent users on VM - A maximum of 2 concurrent connections are supported, unless the server is configured as a Remote Desktop Services session host.
Girish Prajwal

Find out how many remote users are login in to my system.

Hi
i just want to know how many no of remote users are logged in to my system and their information.
how can i restrict them. how to limit the remote connections.
how many ftp user's are connected to my system.
can any one send me documents which contain brief information for about questions.

use rusers and finger commands to check the users remotely login
form limitint the access of user u need to create $HOME/hosts.equiv and $HOME/.rhosts and making entry for those users who u want to allow

How many concurrent users are allowed in 8.1.7

Hi All,
I need to find out how many users can log into a 8.1.7 database. Can anybody help me with this?
Its a 8.1.7 database running on Sun 5.9
Any help would be very appreciated.

What Joel said is true but you may also need to set a couple of init.ora parameters for sessions, processes. Oracle provides a couple of parameters that can be used to limit connections: license_max_sessions, license_max_users, and license_sessions_warning.
See the Oracle 8.1.7 Reference manual for details on the parameters.
HTH -- Mark D Powell --

How to find out how many concurrent users using web application?

Hi all,
I have a web application deployed using 9iAS. I am trying to find out how to find out how many concurrent users are using this application at any one time. According to Oracle there is no way to see this information using the enterprise manager interface.
Does anybody out there know how I can find out this information in real time? Failing that, are there any good analysis tools out there that display usage to the minute (all the tools I have found show usage by hour which is not sufficent for my needs).
Any help would be much appreciated,
Caroline

I know I haven't heard of any software to do this, but this also sounds like a really hard problem to try and really analyze well.
The trick is, you might "infer" how long a user is using an application based on when cookies are set and when they're set to expire. If that's a long time, though, that could count far more "concurrent" users than are actually there. A user could simply close the application at any time and stop using the application; you can't really detect that because the server isn't "told" when the user closes their browser or goes somewhere else.
A good perl script might be able to read the Apache access log and tell you how many unique IPs asked for a given directory in which various applications are stored in any 5 minute span of time... that could be something like an indicator of "concurrent" users.
If you don't know Perl, I'd suggest getting the O'Reilly & Associates book on Perl and learning it, because the more I think about this, the more this sounds like a textbook example for applying a Perl script.

How many itunes accounts are allowed per computer?

Hi, I'm trying to figure out the best way to handle configuring all 80 of the iPads my business is purchasing. I know there is a limit of 10 devices per iTunes account. How many iTunes accounts are permitted per computer? I tried to just create 8 apple ids, which I was able to do online. But when I try to sign in to those on iTunes, once I get to the part where I verify with a credit card, I can not get past the 3rd one. I have previously signed in with 2 other accounts on my machine, so I'm wondering if there is a limit of 5 accounts per computer. Can anyone verify? If that's true, what suggestions do you have for how to get around or best manage this situation?
I'm not as much of a techie as I should be.. but thanks in advance for your help!!

Hi allisonwfrom nc,
The limit you are referring to is for a single personal Apple ID (not for multiple users) that is allowed to be associated with a total of 10 devices (up to 5 computers and the rest on iOS devices). Example you can have 5 computers and 5 iOS devices, 3 computers and 7 iOS devices, but not 6 computers and 4 iOS devices.
From http://www.apple.com/legal/itunes/us/terms.html#SERVICE
Association of Associated Devices is subject to the following terms:
i) You may auto-download iTunes Auto-Delivery Content or download previously-purchased iTunes Eligible Content from an Account on up to 10 Associated Devices, provided no more than 5 are iTunes-authorized computers.
Again this is for a single user. For multiple users like in schools or businesses you need to use VPP to purchase multiple licenses. http://www.apple.com/business/vpp/
APP STORE PRODUCT USAGE RULES
( i )If you are an individual acting in your personal capacity, you may download and sync an App Store Product for personal, noncommercial use on any iOS Device you own or control.
( ii ) If you are a commercial enterprise or educational institution, you may download and sync an App Store Product for use by either (a) a single individual on one or more iOS Devices used by that individual that you own or control or (b) multiple individuals, on a single shared iOS Device you own or control. For example, a single employee may use an App Store Product on both the employee's iPhone and iPad, or multiple students may serially use an App Store Product on a single iPad located at a resource center or library. For the sake of clarity, each iOS Device used serially by multiple users requires a separate license.
If you are an educational institution or business you will want to enroll in Apple's Volume Purchase Program (VPP) which allows a single Apple ID to purchase multiple licenses of an app.
There is a free OS X program called Apple Configurator that you can use to distribute the VPP codes to your fleet of iPads. Apple Configurator uses a single Apple ID to install apps on your iPads. Configurator will also allow you to install free apps on multiple iPads using a single Apple ID.
There are a few things I recommend you do to get started:
First I would watch the iOS Deployment Model Videos on the left side of this page:
http://www.apple.com/education/resources/information-technology.html
Then I recommend you read through these two guides:
iOS 6 Education Deployment Guide
http://images.apple.com/education/docs/ios_6_education_deployment_guide.pdf
Apple Configurator Help Guide
http://help.apple.com/configurator/mac/1.0/
This will give you a solid foundation for managing iPads with Apple Configurator. Once you read through these guides you will likely have more specific questions that you can post to these forums.
Hope this answers your question!
~Joe

Parallel How many times user can login to the SAP system through ITS

Hello all
We are using the ITS ---620 and following 46D R/3 system
R/3 system details:
Kernal :
kernel release :46D
O/S :SunOS 5.8 Generic_108528-05 sun4us
We would like to now, At a time How many times user can login to the SAP system through ITS
Kindly letus know if any one have idea about parameter which can restrict the end users to u201CNu201D times/ sessions.
Transaction SITSPMON/SMICM are not working in R/3 system as it is 46D.
We found that parameter u201Clogin/disable_multi_gui_loginu201D works with SAPgui logons.
System logons using the Internet Transaction Server (ITS) or Remote Function Call (RFC) are not affected by this Parameter u201Clogin/disable_multi_gui_loginu201D
I need similar parameter u201Clogin/disable_multi_gui_loginu201D for the ITS users.
Thanks

I have searched all docs and notes.
Everytime the answer is PArameter for multi_gui_logonis not applicable for SAP Gui for HTML ( Browser )
The functionality does not exist for SAP Gui for HTML.
Regards,

How many cooling fans are in 13" MacBook Pro retina?

I just got a late 2013 13" MacBook Pro with retina display and I'm wondering how many cooling fans are in the machine. I've noticed when I use iTunes to play music/movies or use the iTunes visualizer, it gets hot. I've seen the videos on the retinas and I've notived that the 15" model has two and I can't find any videos or pictures indicating whether the 13" has one or two. I know that the openings on the side are to bring in air and then pushes it out where the screen and the keyboard meet. I notice a lot of hot air coming out more towards the right of the machine than the left. I had a mid 2012 non-retina Pro but I had it replaced as it had too many issues and I know when I used it, it didn't get as hot when I did this stuff. I'm just making sure in case it's an issue, even thought I got this new MacBook on Monday 6/9/14. I'm also guessing it heats up faster since its a smaller machine and the components are a lot closer. And I understand that playing games or doing something that requires a lot of processing or graphics power will cause the machine to heat up since it's requiring so much from the machine. Like I said, I want to avoid having issues with this one. My last MacBook had three logic boards, two hard drives, hard drive cable, hard drive bracket, and clam shell replaced in less than a year of purchase in September 2013. When the hard drive crashed last week for no apparent reason last week, I took it to Apple on Monday this week and they finally made the choice to replace it completely and I upgraded to a retina just by paying the difference.

This is my mac's info. I got it as a gift from australia. Initial 3 months it gave me a superb service, but recently it's having a major overheating issue,it shoots up up to 87 degrees. Is it possible that any other components are damaged somehow? Usually the temperature shoots up while I play online streamings.

How to filter results from 4 dynamic list menus depandant on how many of them are selected

I have a search page with a form with 4 list menus and 1 submit that post the results to the results page. I can create a record set that either retrieves the correct data from my database if a selection is made from all four menus Or i can create the recordset if only 3 menus have a selection or the same for 2 menus and 1 menu. However i want the user to be able to make a selection from either 1, 2, 3 or all 4 of the menus and the exact data be retrieved. At present if i try to combine the recordset using AND and ORs the results are not specific enough, for example the 4 menus are Location, Type, Price & Style if a user selects from all 4 i only want to retrieve data that matches all 4 criteria, but at the same time if the user selects only 2 of the menus the i want it to retrieve data that matches specifically those 2 variables. I´m not actually sure if i should be creating a more advanced sql query of if its the php side of things that i need to look at. This is my first dynamic site so please be aware i´m still a learner where php and sql is concerned. Please can anyone help?

Hey there,
Thanks for replying,
I too am using Dreamweaver recordset, my local server is XAMPP ( apache php mysql), i´have pasted my sql recordset below to give an idea of what i´m trying to do, however this does not work as i´m trying to select the exact data based on 4 menus PRICE TYPE LOCATION and BEDS, and also want the search to work if the user only selects options from either 1, 2, 3 or 4 of the menus, with the code as it is if the user select only two options from 2 of the menus the results don´t just find (for example) all results for location AND price they find all results for the location varibale OR the price variable rather than a match for both, if you see what i mean?
Any suggestions?
SELECT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number`
FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid
WHERE (location=varloc AND price = varprice AND type=vartype AND beds=varbed ) OR (price=varprice AND location=varloc AND type=vartype) OR (price=varprice AND location=varloc AND beds=varbed) OR (price=varprice AND beds=varbed AND type=vartype) OR ( location=varloc AND type=vartype AND beds=varbed) OR (price=varprice AND location=varloc) OR (price=varprice AND type=vartype) OR (price=varprice AND beds=varbed) OR (type=vartype AND location=varloc) OR (type=vartype AND beds=beds) OR (location=varloc AND beds=varbed) OR (price = varprice OR beds=varbed OR type=vartype OR location=varloc)
ORDER BY detailstable.trueprice ASC
Look forward to receiving your thoughts,
Linda
Date: Wed, 21 Oct 2009 14:36:33 -0600
From: [email protected]
To: [email protected]
Subject: how to filter results from 4 dynamic list menus depandant on how many of them are selected
Hiya,
I'm just doing my first dynamic site too, and am at a similar level to yourself.
Can you give us more info re the site. What software, eg Dreamweaver etc are you using, and is your server using PHP or ASP etc?
For what I've used, I amended the SQL side of things in the recordset in Dreamweaver. That way, you can test the SQL as you're setting up the recordset.
Let me know how you're going on anyway
Cheers
Andy
>

A way to find out how many screens/windows are open

hi everyone,
is there a way to find out how many sap screens are currently open? i need to know this because my program should react differently if the user has all 6 screens opened or if he has only one screen open.
<each thread here has the same priority!>
thanks in advance!
Edited by: Thomas Zloch on Apr 12, 2010 3:59 PM

Try calling function module TH_USER_INFO.
Thomas

Find how many archive logs are generated and backup through RMAN

friends,
how many arhcive logs are generating between 2 consecutive backups through RMAN.
Ur help is really appricated.
Thanks

Sorry, I misunderstood the question
I think you are not asking how many logs are generated since last backup. My initial repy was the answer for this
The answer of you question on 10G R2 is like below. Query groups your archivelog backup sessions and counts the logs in one session which is the number of generated archivelog file between two backup session/.
select session_key,count(sequence#) from V$BACKUP_ARCHIVELOG_DETAILS group by session_key order by 1 desc
Coskan Gundogar
http://coskan.wordpress.com

How to khow how many foreign key are referenceing the primary key

sir i would like to know that how many foreign key are referencing the primary key of a table
is any command to know the table name
please suggest
thanks in advance..

In the query below, table_name is the name of the table whose primary key is referenced.
SELECT b.owner owner
,b.constraint_name foreign_key
,b.constraint_type constraint_type
,b.table_name referencing_table
,b.r_constraint_name primary_key
,c.table_name referenced_table
,c.column_name referenced_column
FROM all_constraints a
,all_constraints b
,all_cons_columns c
WHERE a.owner = b.owner
AND a.table_name = :table_name
AND a.constraint_type = 'P'
AND b.r_constraint_name = a.constraint_name
AND b.constraint_type = 'R'
AND c.constraint_name = a.constraint_name
AND c.owner = a.owner;
If the name of the primary key is known, the query below
select * from all_constraints where constraint_type = 'R' and r_constraint_name = :pk_name

I am reading in ibooks and i do not see how many pages there are or what page i am on. how do i fix this

i am reading in ibooks and i do not see how many pages there are or what page i am on. how do i fix this

Some books may not display a page number on each page, or the position indicator, because the author did not include them.
Most basic books resembling paperbacks that are mostly words (like Kindle books) will display these because they are so basic
that iBooks knows they need to have that information superimposed, so it just does it.
For more advanced books, the people who made the book may elect to not display page numbers for some or all of the pages.
What book are you reading, and have you looked at another book and had the same problem?

How Many of You are Willing?

How many of you are willing to line up at the stores like we did for the launch to demand justice?
Frankly, I'd be encouraged to see people actually get off the 'net and go out on the streets. Me? I'll save my shoes for things like:
Stopping a war on Iran.
Actually voting so that massive vote fraud does not matter.
Changing fund policy so the dollar does not collapse, so we'll still be able to buy cool gadgets manufactued in China.
Making sure there is no draft so my son does not go to war.
Ensuring that executive orders don't suspend government in the event of another terrorist attack.
Am I loosing perspective here? I consider myself lucky, if not a bit foolish, to have been able to get an iPhone on day zero.
I still want a credit, but is this the only thing that gets us mad enough these days?
Ok, back to your regularly scheduled support forum.

Please tell me that there are others who touch their phone and feel somewhat dirty, but very priviledged and are willing to see things for what they are.
Oh, and please tell me Apple has a strategy for allowing me to develop legit 3rd party apps too.
And the credit thing too. So I can buy more Apple stuff and feel good about it.
(wow, am I shallow or what?)

How many SECONDARY INDEXES are created for CLUSTER TABLES?

how many SECONDARY INDEXES are created for CLUSTER TABLES?
please explain.

There seems to be some kind of misunderstanding here. You cannot create a secondary index on a cluster table. A cluster table does not exist as a separate physical table in the database; it is part of a "physical cluster". In the case of BSEG for instance, the physical cluster is RFBLG. The only fields of the cluster table that also exist as fields of the physical cluster are the leading fields of the primary key. Taking again BSEG as the example, the primary key includes the fields MANDT, BUKRS, BELNR, GJAHR, BUZEI. If you look at the structure of the RFBLG table, you will see that it has primary key fields MANDT, BUKRS, BELNR, GJAHR, PAGENO. The first four fields are those that all cluster tables inside BSEG have in common. The fifth field, PAGENO, is a "technical" field giving the sequence number of the current record in the series of cluster records sharing the same primary key.
All the "functional" fields of the cluster table (for BSEG this is field BUZEI and everything beyond that) exist only inside a raw binary object. The database does not know about these fields, it only sees the raw object (the field VARDATA of the physical cluster). Since the field does not exist in the database, it is impossible to create a secondary index on it. If you try to create a secondary index on a cluster table in transaction SE11, you will therefore rightly get the error "Index maintenance only possible for transparent tables".
Theoretically you could get around this by converting the cluster table to a transparent table. You can do this in the SAP dictionary. However, in practice this is almost never a good solution. The table becomes much larger (clusters are compressed) and you lose the advantage that related records are stored close to each other (the main reason for having cluster tables in the first place). Apart from the performance and disk space hit, converting a big cluster table like BSEG to transparent would take extremely long.
In cases where "indexing" of fields of a cluster table is worthwhile, SAP has constructed "indexing tables" around the cluster. For example, around BSEG there are transparent tables like BSIS, BSAS, etc. Other clusters normally do not have this, but that simply means there is no reason for having it. I have worked with the SAP dictionary for over 12 years and I have never met a single case where it was necessary to convert a cluster to transparent.
If you try to select on specific values of a non-transparent field in a cluster without also specifying selections for the primary key, then the database will have to do a serial read of the whole physical cluster (and the ABAP DB interface will have to decompress every single record to extract the fields). The performance of that is monstrous -- maybe that was the reason of your question. However, the solution then is (in the case of BSEG) to query via one of the index tables (where you are free to create secondary indexes since those tables are transparent).

HOW MANY VERIZON USERS ARE DISAPPOINTED LIKE ME?

Similar Messages

Maybe you are looking for