How many video lines does FCE V3.5 has?

I heard that there is only one video line as reflected by the review for FCE software.
Is that true?

Hi Ian,
Not an Americanism that I know of. I read the post too and couldn't tell if he was talking about interlaced video lines or FCE video tracks. You asked the right question in your first reply.
cheers,
Martin
ps. We're going out to a new local pub tonight, I heard through the grapevine they might even have Adnams Broadside !

Similar Messages

How can I tell what video card and how much video memory does my iMac have?

How or where can I find out: which video card does my iMac have and how much video memory does it have? I've tried looking in System profiler, but I did not see it there. Thank you.

Once you open System Profiler there should be a line called "memory" which is the RAM (vs. hard drive size which is not what is called memory), e.g., Memory: 1.5 GB
For video click on the line Graphics/Displays and look at the chipset line, e.g., Chipset Model: GeForce2 TwinView
Kappy's instructions are handy for checking the original configuration of your computer, but that may have been changed at some time, especially if you bought it secondhand.

How many Story Lines may I have ?

Hello everyone!!!
So, I'm a musician and I wanna make music videos to youtube (just like thousands of other people do)...
Wanna make my videos with FCP X...
I saw some videos (tutorials) on youtube about tips and tricks on FCPX... Problem is that at any video (tutorial) I watch there's only a main story line...
On some videos I may see the main story line and a secondary track above...
Once I saw a tutorial that I can transform the secondary line into a story line - and then it will act just like my main story line.
What I want to point out is that as a musician and making a music video, I would need maybe 6~9 story lines (for all instruments and stuff)... Because spliting the videos and sycing them over and over again would be annoying... It would be a lot easier if I could just have how many story lines I want, have them all sync and then just split the videos...
(Hope I was clear enough, english is not my main language, sorry for that)
So, to simplify, my question is: How many story lines can I have in FCPX ? (at least 2 I know I can have 'cuz I've already seen this on tutorials, wanna know if it is possible to have more than 2 or if 2 is the limit)
Thanks already everbody!!

Salivan, you can have as many storylines as you like.
What you need to do is place your first or main instrument I the primary storyline. Add your second instrument as a connected clip, and turn that into a storyline by selecting it, right click & select create storyline.
Now there is no reason why you can't add another connected clip above the secondary storyline, and place that clip or clips into another storyline.... and so on

HT4407 How many GB's Does BootCamp take?

I Have got a MacBook Air from late 2011, and it's "only" got 128GB's discspace, then i wanted to hear about how many GB's does BootCamp Take?

Windows 7 specs out at a *minimum* free drive space of 20GB for the 64 bit version and that would likely be very tight for a working Windows machine. Given the limited drive space on an SSD (especially if you have the 128GB rather than 256GB drive) I opt for virtualization largely so I can retain one single drive partition rather than having to partition between Windows and OSX. That is, you can have a small Windows virtual drive and then share folders from OSX that will allow using the space as needed by each operating system.
Of course that requires buying Parallels or VMWare Fusion in addition to Windows, but I figure it's more than than worth it just for the flexibility it gives.
That said, on this 13" Air with a 256GB drive I have an "inherited" 80GB Windows 7 virtual machine (came over from the old MacBook Pro). On my 11" Air with a 128GB drive I opted to install a new virtual machine on an external SSD, but I don't often need Windows on that machine.
The main downside to virtualization is a slight loss of speed, especially on high end video intensive applications (meaning things like gaming). However the Intel video chipset in the Air is hardly optimal for that sort of thing to begin with, so I wouldn't have gone for an Air for a machine that was going to be dedicated to doing a lot of that sort of thing.

HOW MANY VIDEOS

HOW MANY VIDEOS CAN YOU DOWNLOAD ON IPOD I ALREADY DOWNLOADED 25 I HAD TROUBLE DOWNLOADING MORE

Then it's full. You are done downloading until you delete something.
Go to Settings -> General -> About. The "Available" line will tell your how much space is left.
BTW: Turn off your caps lock. All caps is considered as shouting in these forums and is thought of as rude.
If you want a manual for your iPod Touch, get one here: http://manuals.info.apple.com/enUS/iPod_touch_2.2_UserGuide.pdf

How many OSPF Processes does a Cat6500 w/ Sup720 support?

Hi,
we've to build many vrf's and have to run
OSPF on each of these.
My question is, how many OSPF Processes does a Cat6500 w/ Sup720 can support?
regards
kf

Harold,
Thanks for the clarification. I hope you don't mind one more question. I have looked it up..http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_4/gtospfvf.htm
but it is not clear whether multiple vrfs can share the same routing process through the routing context mechanism. If this is not supported yet, then I wonder how scalable this is, and in particular whether service providers will view this as a viable feature considering the demand on resources on a PE router to run multiple (according to the document, depending on platform, up to 10,000!) ospf processes?
Regards,
E.

How many video hd out with a new macpro ?

How many video hd out with a new macpro ? For example can i use 4 out hd with modul8 with 4 projectors and 1 for my screen ?(sorry for my english)

See:
Mac Pro (Late 2013): Using multiple displays
Also see the follow for problems with 10.9.3
https://discussions.apple.com/thread/6224241?tstart=0
10.9.3 kills third monitor: Apple Support Communities

How many phone lines can i add to my conference calling feature.

How many phone lines can I add to conference calling on my iPhone?

That depends on your cellular carrier. Ask them.

For some reason the Apple ID window in iTunes and App Store now seems to have a character number constraint. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?

For some reason the Apple ID window in iTunes and App Store now seems to suddenly have a character number constraint which prevents me using my 29 character Apple ID. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?

You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441)

G4 quicksilver dual 1ghz: how many video cards can i install?

i've kept this great old machine on the shelf, now i've found a use for it! i've been programming video installations for theatre using isadora (on more modern machines) and would love to utilize my old G4. currently installed is the stock card with a VGA and an ADC output, and i've run 2 monitors off it in the past. i'd like to run my ADC powered 17" studio display (control screen) plus at least 2,3 or more video projectors, so i'd like to install an additional video card(s). ideally VGA or DVI, but s-video or even component could work- it doesn't need to be high definition. can this machine handle it, and if so, recommendations for a good card, or multiple cards? i have several open slots, how many is feasable to stack in there?
thanks y'all!

Remember that video cards use the most power of any PCI cards. There is usually a finite limit to how much power the computer's PCI bus can provide.
I don't know the limimts on the QS, but the old Beige G3s has a limit of 45W total across three slots--I doubt it's a lot more on yours. The assumption back then was that most PCI vidcards then drew 25W. Unlike newer cards that have power "taps" top allow direct connection to the power supply, older PCI vidcards seldom had this convenience. I have a radeon 9200 and it does not.
The 9200 had a lot of VRAM but did not support Apple's Quartz Extreme video technology. Although great for 3D stuff, its 2D performance in OSX was dismal, with scrolling and dragging being choppy. You do not want that card as you primary video source on a computer with AGP graphics. There was a hack to get around the QE issue but it seldom worked without issue if you had more that one PCI card of any kind.

How many command line can 7507 support

hi
i have a problem
if i wnat to setup static lu point to ip address
i will need two line to define
but in my cx site have more than one thousand pc
so i need to define
client ip x.x.x.x lu 2
client printer ip x.x.x.x 3
plus 1000 pc
it will exceed two thousand command line
how many capacity does 7507 have
tks

Hi,
i found this in the CCO:
Handling Large Configurations
The largest size nonvolatile random-access memory (NVRAM) planned for the Cisco 7500 series routers is 128 KB. The maximum number of nailing commands that can be stored in a 128 KB NVRAM is approximately 4000. However, large configurations may map as many as 10,000 IP addresses to LUs.
To maintain a configuration file that exceeds 128 KB there are two alternatives. The configuration file can be stored compressed in NVRAM. Or, the configuration file can be stored in Flash memory that is either internal Flash or on a PCMCIA card.
look at this Link:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/bclunail.htm
cu thomas

How many video chats can you use with this server?

I am looking to develop a multi-video chat app that's easy to
build. Can I use Stratus with this? Or do I need to use FMS.

none of the video streams will pass through Stratus. Stratus
only enables end-to-end streams. You are limited only by the amount
of bandwidth the client ends have as far as how many different
streams can be flowing.
if you need to relay streams through a server (the to-many
case, or the end-to-end is blocked by firewalls or certain NAT
configurations cases), you'll need to use FMS.
-mike

How many DMA Channels does my device have?

I would like to know how I can find out (progammatically) how many DMA channels my device has. I am using the DAQmx driver. Other than with the traditional DAQ I can't find out anything about my device but the "type" and the "serial number". Where can I get some more details about the device (not in the MAX - I want to know it in my program) with DAQmx?
My intention is to find out how many DMA Channels the device has and depending on how many Channels I need - I am using "interrupts" instead of DMA.
Somewhere in the KB of Ni was written that the NI-DAQ 6.9.... realizes automatically how many DMA Channels are available and how many I would need - and so he takes "interrupts" for the rest.
It seems that they did a "step bac
kwards" because with the NI-DAQ 7.2 it doesn't work automatically if I need DAQmx VI's.
Does somebody know anything that would help me to solve this problem?
Thanks.

Sorry! I posted my first revision of the answer.
Here is what I meant to say:
Hello,
According to this KnowledgeBase, DAQmx and Traditional DAQ behave the same. Are you seeing something different?
As far as a workaround goes, all you have to do is trap the No DMA error. This error should be -200251. So in software, if you receive error -200251, then you need to configure the board to use interrupts, and then start the task again.
How to configure the board for interrupts differs from the four different DAQmx API�s (C, C++, DotNET, and LabVIEW). If you are unclear about how to do this in your environment, please let us know, and we can find
out.
Best regards,
Justin T.
National Instruments

How many route entries does 3945E or/and 3900 ISR G2 support

hello guys:
I have a question concerning about how many ospf and bgp route entries does 3945E isr g2 router support?
cheers
tony xi

Tony,
This question can't be answered in general. It depends foremost on the amount of available memory in the router. With 256MB of RAM, you can expect that the router can manage roughly tens of thousands of routes. The full BGP routing table (not the BGP database) consumes around 70MB, however, the full BGP RIB on one of the route-views project routers consumes over 1100 MB of RAM (this also depends on the number of BGP peers and the amount of data sent to it by individual BGP neighbors). The exact number is impossible to determine, as it depends on the amount of other control information that the router has to store in its RAM - for example, OSPF LSDB, BGP RIB, the CEF and adjacency tables, etc. etc. etc.
So you can assume that 256MB of RAM should be working for deployments up to the order of tens of thousands but this has to be taken with a very, very rough and unreliable estimate.
Best regards,
Peter

How many external displays does the 15 inch support?

I spend 90% of my time at a desk developing, using multiple monitors. My current Windows system can support up to 4 displays, normally I run with 3. I was wondering how many external displays one can hook up to the 2.3GHz Macbook Pro. I need at least 3 displays while still having a thunderbold for external drives and eithernet. Does the Mini DisplayPort to Dual-Link DVI Adapter allow splitting the single to two different monitors? Other then the Thunderbolt display, is there a way to get multiple monitors out of one Thunderbolt port?

From http://support.apple.com/kb/SP690 -> "Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, both at millions of colors".
But there may be ways of driving three monitors - maybe someone with a Retina Display model will jump in. I know that on my 15" 2011 model, I can only drive two Apple Thunderbolt Displays.
Good luck,
Clinton

How many video lines does FCE V3.5 has?

Similar Messages

Maybe you are looking for