How many viruses are out there?

Am is safe to do online banking out of the box? How many viruses/malware/spyware etc are out there? Kaspersky are offering protection but is it necessary?

adam12345 wrote:
How many viruses/malware/spyware etc are out there?
I see your question has been answered, but thought I'd give you a more complete answer to this part of your question by pointing out this listing of Mac Malware from Thomas Reed http://www.reedcorner.net/guides/macvirus/malware_catalog.php.
Spyware is a different catagory so you might want to also take a look at SecureMac's list http://macscan.securemac.com/spyware-list/
That being said, I concur with everything Noble Seven has already stated.

Similar Messages

How many LabVIEW licenses out there?

This Q isn't of a technical nature; but I'm searching for reasons for my superiors to support my effort in creating a LV solution for our device. The bean counters need to count their (potential) beans.
Does anybody have a ballpark idea about how many LabView licenses are out there? I realize this is a big number, but what order of magnitude?
I realize that universities are big users.. would you say that MOST schools use LV in some capacity?
In industry: What industries?
If you can help me with this, then I can go back to being a software weenie and take off this ill-fitted marketing hat. Then I'll start pelting you with tech Qs.
Thanks-
Suz.

LabVIEW is everywhere!
I am not sure if the total number of LabVIEW developers is public information, a better number would probably be the market share in test/measurement/instrument control, etc. software. Another number would be the count of deployed system with LabVIEW under the hood or used in development. This is probably also rapidly growing, especially counting FPGA and embedded systems.
Have a look at figures 1&2 from this article. It shows LabVIEW way ahead at 32% long ago (Q1 2004). There are probably newer numbers available somewhere.
Just wait a few years until all the particiants of FIRST enter the job market and things will really start rolling exponentially.
Message Edited by altenbach on 01-28-2009 12:26 PM
LabVIEW Champion . Do more with less code and in less time .

How do I find out how many fans are there in a router with the help of CLI? Specifically cisco3845 with ios c3845-spservicesk9-mz.124-3b.bin

       I have an issue where show env o/p is as below, I suspect the FAN 1 which shows failed is not present in router, how do i find out with the help of CLI , how many fans are present in router.
#show environment all
SYS PS1 is present.
       Fan status: Normal
       Input Voltage status: Normal
       DC Output Voltage status: Normal
       Type: AC
       Thermal status: Normal
SYS PS2 is present.
       Fan status: Normal
       Input Voltage status: Normal
       DC Output Voltage status: Normal
       Type: AC
       Thermal status: Normal
AUX(-48V) PS1 is absent.
AUX(-48V) PS2 is absent.
Fan 1 Failed
Fan 2 Normal
Fan 3 Normal
Fan Speed is Normal
Alert settings:
Intake temperature warning: Enabled, Threshold: 55 Core temperature warning: Enabled, Threshold: 70 (CPU: 90)
Board Temperature: Normal
Internal-ambient temperature = 28, Normal CPU temperature = 41, Normal Intake temperature = 22, Normal Backplane temperature = 19, Normal
Voltage 1(3300) is Normal, Current voltage = 3284 mV Voltage 2(5150) is Normal, Current voltage = 5153 mV Voltage 3(2500) is Normal, Current voltage = 2525 mV Voltage 4(1200) is Normal, Current voltage = 1203 mV
Nominal frequency

This means that FAN1 has failed.
Fan 1 Failed
Feb 14 07:31:01.996 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:31:21.996 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:31:41.995 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:32:01.994 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported. Feb 14 07:31:01.996 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:31:21.996 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:31:41.995 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:32:01.994 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.

Need to find out how many users are using Siebel Application

Hello all,
I need to find out how many users are using Siebel Application?
Is there a way I can find out?
Thanks.
yasun

Hi,
Read the following:
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor30.html
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor17.html
For full information about server status and statistics red:
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor.html
T.Abed

Having issues finding out how many bytes are sent/recieved from a socket.

Hello everyone.
I've searched the forums and also google and it seems I can't find a way to figure out how many bytes are sent from a socket and then how many bytes are read in from a socket.
My server program accepts a string (an event) and I parse that string up, gathering the relevant information and I need to send it to another server for more processing.
Inside my server program after receiving the data ( a string) I then open another port and send it off to the other server. But I would like to know how many bytes I send from my server to the other server via the client socket.
So at the end of the connection I can compare the lengths to make sure, I sent as many bytes as the server on the other end received.
Here's my run() function in my server program (my server is multi threaded, so on each new client connection it spawns a new thread and does the following):
NOTE: this line is where it sends the string to the other server:
//sending the string version of the message object to the
                    //output server
                    out.println(msg.toString());
//SERVER
public class MultiThreadServer implements Runnable {
     Socket csocket;
     MultiThreadServer(Socket csocket) {
          this.csocket = csocket;
     public void run() {
          //setting up sockets
          Socket outputServ = null;
          //create a message database to store events
          MessageDB testDB = new MessageDB();
          try {
               //setting up channel to recieve events from the omnibus server
               BufferedReader in = new BufferedReader(new InputStreamReader(
                         csocket.getInputStream()));
               //This socket will be used to send events to the z/OS reciever
               //we will need a new socket each time because this is a multi-threaded
               //server thus, the z/OS reciever (outputServ) will need to be
               //multi threaded to handle all the output.
               outputServ = new Socket("localhost", 1234);
               //Setting up channel to send data to outputserv
               PrintWriter out = new PrintWriter(new OutputStreamWriter(outputServ
                         .getOutputStream()));
               String input;
               //accepting events from omnibus server and storing them
               //in a string for later processing.
               while ((input = in.readLine()) != null) {
                    //accepting and printing out events from omnibus server
                    //also printing out connected client information
                    System.out.println("Event from: "
                              + csocket.getInetAddress().getHostName() + "-> "
                              + input + "\n");
                    System.out.println("Waiting for data...");
                    //---------putting string into a message object-------------///
                    // creating a scanner to parse
                    Scanner scanner = new Scanner(input);
                    Scanner scannerPop = new Scanner(input);
                    //Creating a new message to hold information
                    Message msg = new Message();
                    //place Scanner object here:
                    MessageParser.printTokens(scanner);
                    MessageParser.populateMessage(scannerPop, msg, input);
                    //calculating the length of the message once its populated with data
                    int length = msg.toString().length();
                    msg.SizeOfPacket = length;
                    //Printing test message
                    System.out.println("-------PRINTING MESSAGE BEFORE INSERT IN DB------\n");
                    System.out.println(msg.toString());
                    System.out.println("----------END PRINT----------\n");
                    //adding message to database
                    testDB.add(msg);
                    System.out.println("-------Accessing data from Map----\n");
                    testDB.print();
                    //---------------End of putting string into a message object----//
                    //sending the string version of the message object to the
                    //output server
                    out.println(msg.toString());
                    System.out.println("Waiting for data...");
                    out.flush();
               //cleaning up
               System.out.println("Connection closed by client.");
               in.close();
               out.close();
               outputServ.close();
               csocket.close();
          catch (SocketException e) {
               System.err.println("Socket error: " + e);
          catch (UnknownHostException e) {
               System.out.println("Unknown host: " + e);
          } catch (IOException e) {
               System.out.println("IOException: " + e);
}Heres the other server that is accepting the string:
public class MultiThreadServer implements Runnable {
     Socket csocket;
     MultiThreadServer(Socket csocket) {
          this.csocket = csocket;
     public void run() {
          try {
               //setting up channel to recieve events from the parser server
               BufferedReader in = new BufferedReader(new InputStreamReader(
                         csocket.getInputStream()));
               String input;
               while ((input = in.readLine()) != null) {
                    //accepting and printing out events from omnibus server
                    //also printing out connected client information
                    System.out.println("Event from: "
                              + csocket.getInetAddress().getHostName() + "-> "
                              + input + "\n");
System.out.println("Lenght of the string was: " + input.length());
                    System.out.println("Waiting for data...");
               //cleaning up
               System.out.println("Connection closed by client.");
               in.close();
               csocket.close();
          } catch (IOException e) {
               System.out.println(e);
               e.printStackTrace();
}Here's an example of the program works right now:
Someone sends me a string such as this:
Enter port to run server on:
5656
Listening on : ServerSocket[addr=0.0.0.0/0.0.0.0,port=0,localport=5656]
Waiting for client connection...
Socket[addr=/127.0.0.1,port=4919,localport=5656] connected.
hostname: localhost
Ip address: 127.0.0.1:5656
Waiting for data...
Event from: localhost-> UPDATE: "@busch2.raleigh.ibm.com->NmosPingFail1",424,"9.27.132.139","","Omnibus","Precision Monitor Probe","Precision Monitor","@busch2.raleigh.ibm.com->NmosPingFail",5,"Ping fail for 9.27.132.139: ICMP reply timed out",07/05/07 12:29:12,07/03/07 18:02:31,07/05/07 12:29:09,07/05/07 12:29:09,0,1,194,8000,0,"",65534,0,0,0,"NmosPingFail",0,0,0,"","",0,0,"",0,"0",120,1,"9.27.132.139","","","","dyn9027132107.raleigh.ibm.com","","","",0,0,"","","NCOMS",424,""
Now my program makes it all nice and filters out the junk and resends the new string to the other server running here:
Enter port to run server on:
1234
Listening on : ServerSocket[addr=0.0.0.0/0.0.0.0,port=0,localport=1234]
Waiting for client connection...
Socket[addr=/127.0.0.1,port=4920,localport=1234] connected.
Parser client connected.
hostname: localhost
Ip address: 127.0.0.1:1234
Event from: localhost-> PacketType: UPDATE , SizeOfPacket: 577 , PacketID: 1, Identifer: UPDATE: "@busch2.raleigh.ibm.com->NmosPingFail1" , Serial: 424 , Node: "9.27.132.139" , NodeAlias: "" , Manager: "Omnibus" , Agent: "Precision Monitor Probe" , AlertGroup: "Precision Monitor" , AlertKey: "@busch2.raleigh.ibm.com->NmosPingFail" , Severity: 5 , Summary: "Ping fail for 9.27.132.139: ICMP reply timed out",StateChange: 07/05/07 12:29:12 , FirstOccurance: 07/03/07 18:02:31 , LastOccurance: 07/05/07 12:29:09 , InternalLast: 07/05/07 12:29:09 , EventId: "NmosPingFail" , LocalNodeAlias: "9.27.132.139"
Lenght of the string was: 579
The length of the final string I sent is 577 by using the string.length() function, but when I re-read the length after the send 2 more bytes got added, and now the length is 579.
I tested it for several cases and in all cases its adding 2 extra bytes.
Anyways, I think this is a bad solution to my problem but is the only one I could think of.
Any help would be great!

(a) You are counting characters, not bytes, and you aren't counting the line terminators that are appended by println() and removed by readLine().
(b) You don't need to do any of this. TCP doesn't lose data. If the receiver manages get as far as reading the line terminator when reading a line, the line will be complete. Otherwise it will get an exception.
(c) You are assuming that the original input and the result of message.toString() after constructing a Message from 'input' are the same but there is no evidence to this effect in the code you've posted. Clearly this assumption is what is at fault.
(d) If you really want to count bytes, write yourself a FilterInputStream and a FilterOutputStream and wrap them around the socket streams before decorating them with the readers you are using. Have these classes count the bytes going past.
(e) Don't use PrintWriter or PrintStream on socket streams unless you like exceptions being ignored. Judging by your desire to count characters, you shouldn't like this at all. Use BufferedWriter's methods to write strings and line terminators.

Can I find out how many clients are connected to a server process?

Hi, I am hoping I can find out how many clients are connected to a server process. This could be either a programmatic lookout number, a number in a log file etc.
By the way, does lookout have any application (not data) logs? I have noticed that occasionally lookout will crash and I cannot find any logs to determine why, what processes were running, who last accessed it etc.
Thanks

Hello,
There's currently no way to acquire this data. I think that'd be a great suggestion for the product. Please submit your feedback to our developers at the following link: http://digital.ni.com/applications/psc.nsf/default?OpenForm&temp1=&node=
Best regards,
Yusuf C
Application Engineer
National Instruments

Using powershell to find out how many people are using the on-prem SkyDrive

Hi
Is there a way of using powershell to find out how many people are using the on-prem SkyDrive?
Thank you.

Hi,
According to your post, my understanding is that you wanted to use PowerShell to find out the users who use the on premise SkyDrive.
As this is the forum for SharePoint Server, I recommend you post your question to the forum for PowerShell or SkyDrive.
Windows PowerShell forum:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverpowershell
SkyDrive forum:
http://answers.microsoft.com/en-us/onedrive/forum/sdsignin?tab=Threads
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

How to find out how many users are connected to Exchange 2013 servers in "Online" mode? This is coz, online mode causing server performance issues in our environment

All, Any script or method to find out how many users are connected to exchange servers in online mode?
Manju Gowda

Hi
You have to get the "RPC Client Access" log file in your CAS server. There you can see a column called "client-mode" and it has two modes such
as "classic" and "cached". From there you can get the two different client assess modes and their corresponding users.
probably take this file openup on excel and filter to see the two modes
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

How many states are there in a second?

Hi
I have to make an animation in fireworks and I am working in seconds.
I can't work out how many states are there in a second.
Please help.
Thanks in advance.

Not really sure what you are asking. If it is the speed of playback then go to the States panel and to the right is a number. Click it. It says 7/100 sec delay. Change this to alter playback speed. It's been ages since I've done animation in Fireworks

How many users are there?

Dear forum users,
I am Nancy.
Guess some of you already knew that our group is doing some research analysis about Photoshop and this forum.
I'm just curious, how many registered Photoshop Windows user are out there?
Is there anyone can show me where I can get at least a general idea about the users' size?
I already check the download.com, there are nearly: 14.6 million times until Sep. 15th.
And also, this forum, there are nearly 10,000 threads having been posted in the recent one year.
I really tried everything I can think of.
Still can not figure this out.
Any thought?

function(){return A.apply(null,[this].concat($A(arguments)))}
Chris Cox wrote:
there are many more illegal copies in use than legal copies
Grrr... I hates pirates.
I have to wonder, though, if Photoshop were $300 with a $100 upgrade instead of $600 with a $200 upgrade whether more than twice the number of people would buy it and stay current...
-Noel

How can I print the tutors for numbers app, and how many pgs are there

can I print out a hard copy of tutor for numbers that I have purchased. If so about how many pgs are there-thks

Ask the Tutor for Numbers app developer > Contact Us - Noteboom Productions

How many softwares are there to create a setup file for java programs

Hi, i am new to java
I want to know how many softwares are there to create a setup file for java programs.
I know one software i.e java launcher to create a setup file.
I want to know about any other softwares are available to create a setup file for java programs.
I created a setup file for swings program in JCreator.
And don't think that i am wastiing ur time with this question .
Help me regarding this topic.
Thanks in Advance

superstar wrote:
I want to know how many softwares are there to create a setup file for java programs.13, no wait, 42.
I know one software i.e java launcher to create a setup file.You should clearly identify what you think you already know.
I want to know about any other softwares are available to create a setup file for java programs.
I created a setup file for swings program in JCreator.Is this the one you talked before, or is this different?
And don't think that i am wasting ur time with this question .Why should I not think that?

How to check ,how many users are logged in and logged out in oracle ebs 11i/R12.

Hi Experts,
Kindly let me know
how to check ,how many users are logged in and logged out in oracle ebs 11i/R12.
Also, in the database level too ,Do we need to write any trigger for this?
Thanks in advance.

Hi,
How to check ,how many users are logged in and logged out in oracle ebs 11i/R12.
Please check the following links:
Oracle EBS - Number of Users logged into EBS / Oracle Applications currently
List all users currently logged in on Oracle EBS
Also see forum Search:
Forum Search: Logged In EBS User
Also, in the database level too
Please see:
https://forums.oracle.com/message/9225094#9225094
Do we need to write any trigger for this?
Yes you may, But I personally suggest you not to do so as it may affect performance.
Thanks &
Best Regards,

How can we find out how many programs are stored in a percticular package

Hi,
I need to find out how many programs are stored in aperticular package.
For example we are having one package in our project. I need to give all saved programs details into this project. How can we find this.
Thanks in advance.

Hi,
From TADIR table we can find out.
Regards,
Jyothi CH.

ADF: Best way to find out how many rows are fetched?

Hello,
I have overridden method executeQueryForCollection of ViewObject in which I execute supper.executeQueryForCollection and after that want to find out how many rows are fetched during the execution.
If I try to use getFetchedRowCount I always get "0", if using getEstimatedRowCount, query are being re-executed.
What method is better to use for that?
Thank you,
Veniamin Goldin
Forbis, Ltd.

I have a 'home-made' view called RBS, whose definition is this:
create view RBS as
select /*+ RULE */ substr(s.username,1,10) oracle,
       substr(case when s.osuser like 'oramt%'
                   then nvl(upper(s.client_info),'client_info not set')
                   else substr(s.machine,instr(s.machine, '\')+1,length(s.machine))||':'||s.osuser
              end
              ,1,20) CLIENT
,      substr(''''||s.sid||','||s.serial#||''''||decode(s.status,'KILLED','*',''),1,12) kill_id
,      lpad(to_char(t.xidusn),4) rbs#
,      lpad(to_char(t.used_ublk),4) ublk
,      lpad(to_char(t.used_urec),8) urecords
,      i.block_gets
,      lpad(to_number(round((sysdate - to_date(t.start_time,'MM/DD/YY HH24:MI:SS')) * 60 * 60 * 24)),9) time
,      upper(substr(s.program,1,20)) PROGRAM
,      to_char(s.LOGON_TIME,'HH24:MI:SS DD-MON') LOGIN_TIME
from   sys.v_$transaction t
,      sys.v_$session s
,      sys.v_$sess_io i
,      sys.v_$process p
where s.saddr = t.ses_addr
and    i.sid = s.sid
and    p.addr = s.paddr
/By monitoring the URECORDS column value of the row that corresponds to my session doing a transaction, I can see how it progresses.
Toon

How many viruses are out there?

Similar Messages

Maybe you are looking for