How many VLANs supported via MACsec VLAN-trunk link?
Hi,
Any one know how many VLANs maximum allowed across a MACsec link between two C6500 with Sup2Ts or between two N7K respectively?
As far as I know, C3750X has limitation of 8 VLANs, according to
•Cisco TrustSec enforcement is supported only on up to eight VLANs on a VLAN-trunk link. If there are more than eight VLANs configured on a VLAN-trunk link and Cisco TrustSec enforcement is enabled on those VLANs, the switch ports on those VLAN-trunk links will be error-disabled.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-0_2_se/configuration/guide/3750x_cg/trustsec.html
Thanks,
Cedar
Hi,
Any one know how many VLANs maximum allowed across a MACsec link between two C6500 with Sup2Ts or between two N7K respectively?
As far as I know, C3750X has limitation of 8 VLANs, according to
•Cisco TrustSec enforcement is supported only on up to eight VLANs on a VLAN-trunk link. If there are more than eight VLANs configured on a VLAN-trunk link and Cisco TrustSec enforcement is enabled on those VLANs, the switch ports on those VLAN-trunk links will be error-disabled.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-0_2_se/configuration/guide/3750x_cg/trustsec.html
Thanks,
Cedar
Similar Messages
-
How many clients support access points 1602, 2602, 3602?
Hi! How many clients support access point 1602, 2602, 3602. I have found for example that the 1602 supports 32 ClientLink clients and max 128 clients, APs 2602, 3602 supports 128 ClientLink clients and max 200 clients. But is it really? And can we say for example that the AP 2602 will withstand max 200 clients?
The reason the answer varies so much, is because there are so many variables (this is also why the value ranges so much from one manufacture to the next). When determining the answer you are looking for you need to consider the following factors and likely more:
AP model and the features it supports
single, dual, or tri radio AP
20, 40, or 80Mhz wide channels
Device type (b/g, b/g/n, a/b/g/n, a/b/g/n/ac, spatial stream support, and channel width support)
Security/QOS method(s) employed
Average distance from the AP
Obstructions between devices and radios
Number of competing radios for the same channel
Data rates configuration
Rogue detection/mitigation configuration
Surrounding client density not just the area of concern client density
Noise floor levels
Application types/per user network load (is it heavy like YouTube traffic or a drone on the network like Pandora)
Network latency on the switching side - including the internet circuit
Application of per SSID, per user, and or per application rate limiting
The list continues, but I think you get the idea
I have personally seen 80 devices on a 5Ghz radio of a 3500 access point with several other access points and at least 200 other clients in the area and it was working well. That being said I would never design to expect that many on a single radio, but I think it is better said that you can safely design for 20-30 clients per 2.4Ghz radio and 25-40 clients per 5Ghz radio.
The default statement of 20-25 per AP and similar low expectation statements concerning Cisco wireless have been around for many years. It is now 2014. About 65% of clients support 5Ghz, ~9% support AC (already), ~90% support some form of N, and ~0.01% support B only. The landscape of wireless is changing fast making questions like this one have ever changing answers.
I hope this helps :).
John -
How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart. We need connect by Adobe Encoder many people. what is differences between Adobe Media Server 5 Professional, Adobe Media Server 5 Standard and Adobe Media Server 5 Extended?
For the detailed list of differences across editions refer this link
http://www.adobe.com/in/products/adobe-media-server-family/buying-guide-comparison.html -
Cores, how many are supported by After FX CS3 on win vista?
Hi folks,
do you know how many cores are supported by after fx CS3?
I am able to use a dual xeon quadcore workstation with 8 cores and 24 GB Ram for my diploma, but I don't know if this hardware is supported by CS3?
It is the Xeon 5355 Quad Core 2,67 Ghz on dual 771 socket mainboard from Tyan. The OS is Win Vista Premium 64bit.
Does anyone of you have further information if this is doable?
Thanks a lot in advance,
RomanEach instance of AE can only access a maximum of 4 GB of RAM (on Vista64). With the "Render multiple frames simultaneously" option in the preferences, AE CS3 and later can start several hidden copies of itself in the background, which can each address that maxmium amount of RAM, so your machine would ideally use 5 processor cores (5 x 4 = 20 GB and leave 4 GB for the OS.)
In CS4 you can set the number of cores to use, in CS3 you have to do it via a text file, detailed in this post:
i http://generalspecialist.com/2007/02/troubleshooting-after-effects-7.asp (look for "MaxNumberOfProcesses")
PS. On OS X, each instance can address 3.5 GB and on Windows XP and Windows Vista 2 GB (or 3 GB if you are adventurous:
i http://generalspecialist.com/2006/05/using-more-than-2gb-of-ram-in-after.asp )
- Jonas Hummelstrand
http://generalspecialist.com/ -
How many Meraki APs per subnet/vlan
I am trying to cover a 90-story building. Voice is not a requirement, but I would like to be able to seamlessly roam across the infrastructure. How large can I build a flat network, and if I need to cross a threshold, what do I have to do to enable Layer 3 roaming?
The only reason I can thing of why that "soft limit" of 60 Cisco AP's per VLAN exists is the default logging configuration of the AP's. This is the broadcast address so every other AP receives all those messages also, once you configure an syslog destination that is no longer the case. I don't have much experience with Meraki, but I think that they don't work with an external syslog server at all.
I hope that all the other devices are being segment it on a per floor basis? If not, please investigate if you can segment at least some floors together with there own set of "local" VLAN's. You don't want network traffic being switched in "global" VLAN's all throughout the building on a scale like that. -
How many clients support by Cisco One Light Weight AP1262?
Hi Friends,
Recently, our company wireless AP 1262 connected more than 40+ clients, and sometimes the wireless access speed is too slow. those clients are only for MES data transfer, the date no more than 10K of each stations.
So I'd like to know if the one AP can support the network traffic if whole testers transfer the data to Database via this wireless AP1262?
and the WLC no clients roaming option for which clients can connect to another AP around.
I have checked the WLC and AP configuration. no option for clients roaming to another APs, do you know how to configure this AP's Clients move to another APs?
If we setup the new APs in the location, does the clients will be auto connect to this new AP?Load Balancing
Client Window Size
Maximum Denial Count
Load Balancing Statistics
Total Denied Client Count
Total Denial Message Sent
Exceeded Denial Max Limit Count
None 5G Candidate Count
None 2.4G Candidate Count
* Load Balancing is configurable per WLAN.
it‘s already configured the load balancing. -
How many AP supported in each branch office-Flex7500
Hi,
From the document, it said only 50 AP supported in each branch for 7500. My case is the HQ has about 100 AP and other BO has less than 10 for each. I am planning to deploy 7500 in the DC and all the AP are in flexconnect mode. But since the limitation of the AP number for each branch office, I can not deploy 7500 in DC to manage the HQ office AP at all. Any idea?
<A href="http://www.cisco.com/en/US/products/ps11635/products_tech_note09186a0080b7f141.shtml#wbnd" mcehref="http://www.cisco.com/en/US/products/ps11635/products_tech_note09186a0080b7f141.shtml#wbnd">http://www.cisco.com/en/US/products/ps11635/products_tech_note09186a0080b7f141.shtml#wbnd
Data
640 kbps
300 ms
50
1000
Data + Voice
1.44 Mbps
100 ms
50
1000
<BR type="_moz" mozdirty></P>That is for FlexConnect groups. You can have as many FlexConnect APs as you want. You would just have to use multiple FlexConnect Groups if you require using FlexConnect Groups. This is really only used if your using 802.1x and have multiple radius servers.
Sent from Cisco Technical Support iPhone App -
How many gateway supported by PGW ?
Does anyone know that the number of maximum gateway support of PGW ?
Each instance of AE can only access a maximum of 4 GB of RAM (on Vista64). With the "Render multiple frames simultaneously" option in the preferences, AE CS3 and later can start several hidden copies of itself in the background, which can each address that maxmium amount of RAM, so your machine would ideally use 5 processor cores (5 x 4 = 20 GB and leave 4 GB for the OS.)
In CS4 you can set the number of cores to use, in CS3 you have to do it via a text file, detailed in this post:
i http://generalspecialist.com/2007/02/troubleshooting-after-effects-7.asp (look for "MaxNumberOfProcesses")
PS. On OS X, each instance can address 3.5 GB and on Windows XP and Windows Vista 2 GB (or 3 GB if you are adventurous:
i http://generalspecialist.com/2006/05/using-more-than-2gb-of-ram-in-after.asp )
- Jonas Hummelstrand
http://generalspecialist.com/ -
Photostream screensaver - How many photos supported?
I'm curious if a Photostream with just over 900 images would be fully supported on my Apple TV 3rd Gen? I tried other means of screensavers and could never really get many pictures in the loop. It seemed they repeated fairly frequently. I'm hoping the Photostream option is better.
Anyone know? Thanks!Photos are cached for the screensaver and there is a limited amount of space reserved for this. The amount may vary based on factors like resolution etc but it seems to be around 100.
-
Hello,
I have a customer that wants to change his CORE devices, he is concerned about the VRFs instances that he can configure, I know that in the SUP2T from the 6500 supports 8,192 VRFs:
MPLS in hardware to enable use of Layer 3 VPNs and EoMPLS tunneling. Up to 8192 VRFs with a total of up to 256K* forwarding entries per system.
According to the next link:
http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/catalyst-6500-series-supervisor-engine-2t/data_sheet_c78-648214.html
I want to make a comparison between a 6500 with SUP2T and a 4500 with sUP7E but I can't find anything about the VRFs instances in the SUP7E.
Could anyone please help me answering that question???
Thanks a lotThis is the problem. The customer has 2 4507 with SUP-V I think and he want to upgrade. He asked me about one 6509 with SUP2T but I suggested to upgrade to 4507R+E with SUP7E and VSS, I think that the budget of the customer is low...
He needs at least 4 modules of 48 ports so he can receive all their customers. Regarding SUP7 vs SUP8 the main difference is that the SUP8 supports WLC in the module, and has more switching capacity (928 Gbps vs 848 Gbps of the SUP7).
Thanks again
Let me send a copy of the configuration:
CORE-SWITCH#show run
Building configuration...
Current configuration : 77236 bytes
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
service compress-config
hostname CORE-SWITCH
boot-start-marker
boot system flash bootflash:cat4500-entservicesk9-mz.122-31.SGA9.bin
boot-end-marker
ip vrf TMX1
ip vrf TMX2
ip vrf TMX3
ip vrf TMX4
interface Vlan51
description TMX1
ip vrf forwarding TMX1
ip address 192.168.150.65 255.255.255.240
interface Vlan52
description TMX2
ip vrf forwarding TMX2
ip address 192.168.150.113 255.255.255.240
As you can see the configuration is so simple, I copy only the VRF side so you can see the VRF configuration that he is doing, as far as I know this is VRF-LITE, BTW he has a lot of static routing with VRFs -
How many formulas support numbers at ipad?
When import spreadsheet from mail, the sistem showme the folowing message, "The spreadsheet contains more formulas than are supported", What i can do?
Apfelwurm,
I believe that this is the proper place for this question, as it appears to be specific to the iOS version of Numbers. Helpers in the OS X iWork forum are not likely to know much about the iOS version.
Jerry -
NX7600GT-T2D256EZ 2560x1600 supported via DVI-D dual-link?
Does my NX7600GT-T2D256EZ support a resolution of 2560x1600 via DVI-D dual-linkto drive a Samsung SyncMaster 305T?
I am using Vista x64.pmeinl,
The 7600GT Chipset should go to a Max Resolution 2560 x 1600.
Take Care,
Richard -
Hi ,
Can someone please explain me why a trunk link, between two cisco switch, not allow a vlan x traffic if vlan x is not locally configured ?
In my lab I have three switch (2950 but it is the same with 2960 3750 etc).
Switch 1 is connected by trunk to switch 2 and switch 2 is connected by trunk to switch 3.
Switch 1 and switch 3 has configured vlan 10 and interfaces vlan 10 instead Switch 2 has not configured vlan 10
Vtp is disabled (transparent mode) in all switch
Switch 2 not permit switch1 to ping switch3 until I not configure vlan 10.
2950#sh int fa 0/9 status
Port Name Status Vlan Duplex Speed Type
Fa0/9 connected trunk a-full a-100 10/100BaseTX
2950#sh int fa 0/9 trun
Port Mode Encapsulation Status Native vlan
Fa0/9 on 802.1q trunking 1
Port Vlans allowed on trunk
Fa0/9 1-4094
Port Vlans allowed and active in management domain
Fa0/9 1-2,11,101
Port Vlans in spanning tree forwarding state and not pruned
Fa0/9 1-2,11,101
2950#sh vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 128
Number of existing VLANs : 8
VTP Operating Mode : Transparent
VTP Domain Name : daniele
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x63 0x6C 0xF9 0xF6 0xB9 0xDC 0xBE 0xF3
Configuration last modified by 192.168.0.103 at 0-0-00 00:00:00
2950#
It seem that vlan 10 is pruned but I don't understand why (vtp is disabled)
Thanks a lot for you help
DanieleHi lnrdnl78d,
so will give this ago not quite sure how a uploaded images looks,
i have mocked up what i have understood from your explanation so feel free to correct me if i have got this wrong :)
however assuming in this situation that VTP is enabled (which i know you have disabled in yours, but hoping this helps)
in this situation client 1 sends a broadcast to client two.
with VTP pruning enable switch 2 will learn that switch 4 has no ports connected to VLAN 2
so the trunk link to Switch 4 will have VLAN 2 pruned from the trunk link
but 2 and 3 will receive the broadcast and switch 3 will be the only one to forward it out the connected port
from my understanding this is what you have configured in your lab apart from switch 4 but added it to fit the example
does this help demonstrate it at all or am i way off ? -
VLAN Support at routers and switches
is there a table with howmany VLANs each of cisco routers and switches can support.
its not always written at the product data sheet.hi
Do find the details for 1800 ISR series router..
802.1Q VLAN
A total of eight VLANs can be configured to segment a network and offer additional security and separation of network traffic.
VLAN Support
802.1Q VLAN supported on all 10/100BASE-T ports
VLAN Configured
8 VLANs
Wireless VLANs
16
7400 series has reached EOL/EOS status hence i couldnt find any datasheet for that model..
regds -
Where can i get info that how many languages suppo...
Where can i get info that how many languages supported by default in Nokia phone?
If i buy it in UK,how?
Many thanks!
Solved!
Go to Solution.if you buy it in the UK, you would expect it to support your region's main languages or for Europe. for example, i am in asia-pacific region (australia) so the languages i have available to me are English, Pilipino, Tieng Viet and im guessing Japanase/chinese. so how many languages it supports depends on your region of course.
to check what languages are in your phone, goto Settings > PHone > Lanuage Settings> Phone Language (this is for S40 devices, no idea how to check in S60)
i hope this helps
Maybe you are looking for
-
How to maintain the exchange rate of second currency in MIRO ?
hi, User want that the exchange rate of second currency in IR is same as the exchange rate of second currceny in GR, and don't occur any exchange variance in IR. how to do ? BestRegards, Beck.shi
-
Alternate to long long in Solaris 10
Hi, Is there an alternate to long long data type in Solaris? We aren't able to find one. We have tried using xarch=v9 and something like xsupport=ultra; But we can't execute it on a 32-bit machine. Hence we need a substitute for long long data type t
-
SAPBPBEOPBT_PIBDTA bank file not correct
When you create bank file using the format SAPBPBEOPBT_PIBDTA following content can be observed in Record Type 0: 00 0703051100001030511 000000123456711DB&S bvba 8650 HOUTHULST BELGM 0 5 Here we
-
Third party keyboards not showing after installing them
I have installed multiple third party keyboards, however none of them are showing up on my keyboard. I'm only showing the original keyboard and don't have the option to switch. The globe doesn't show either. Anyone have this problem or know how to fi
-
HT201493 Do I have to enter my apple ID every time I open Find My Friends? Annoying
Do I have to enter my apple ID every time I open Find My Friends? Annoying