How many vpn can be used simultaneously in Azure?

I need to add multiple locations to my azure platform approximately 90 branches , I need to know if I should set up a vpn for each branch , or as I should. thank you very much .
I am from Colombia , if they can write in Spanish would be better

Hi,
It seems that you have asked this question before:
https://social.msdn.microsoft.com/Forums/azure/en-US/c533ff85-c155-4a19-8156-67901da66ee4/how-many-vpn-can-be-used-simultaneously-in-azure?forum=WAVirtualMachinesVirtualNetwork#c533ff85-c155-4a19-8156-67901da66ee4
Based on my experience, the maximum limitation for virtual networks and local networks is 100 per subscription and the limitation for local network
sites is 10 per virtual network in Azure. If you connect each on-premise branch with an Azure virtual network, it would be possible to do that. However, the default limitation for virtual networks and local networks is 10 per subscription, you can request
an increase limitation by following the article below:
http://azure.microsoft.com/blog/2014/06/04/azure-limits-quotas-increase-requests/
If you have anything unclear, please feel free to let me know.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

How many counters can I use simultaneously?

I have cDAQ-9172 and 9411.
From the specification of 9411, there are 6DI channels of 9411.
The NI-DAQmx help say
Note PFI terminals are available when the device is installed in slot 5 or slot 6 of an NI cDAQ-9172 chassis.
So, I don't know whether that means 9172 has 2 counters can be used simultaneously.
My question is 9411 has 6DI channels, it can be used as counters simultaneously?
I have more 2 device generate frequency which need to be acquired.
I hope someone here can help me or give me some hint.
QIA
http://www.vitst.com
Virry Test & Control
LabVIEW Certified Developer
Solved!
Go to Solution.

Hi QIA,
The cDAQ-9172 has 2 counters that can be used simultaneously, and you're correct that installing your NI 9411 in slot 5 or slot 6 will allow you to access those counters. Any of the 6 DI lines on your 9411 can be used to access the inputs to either counter.
I'm not sure if you're saying that you have more than 2 signals to measure frequency on. If that's the case, post a little more info about your application (How often do you need to read the frequency? How many channels?) and we can try to figure out a good solution.
Regards,
Kyle

How Many Times Can I Use The Same Serial Number For Adobe Creative Suite 4?

I have design standard and was told I can use the same serial number on multiple computers. How many time can I use it? And say I install it on the maximum number of computers, but get a new computer, can I uninstall it on one of the old computers and use it on the new one? And can I use the programs on both computers simultaneously or do I have to use them one at a time?

Fred Tech wrote:
Broadly speaking, it depends on the type of license you have.
Specifically, if you have a single license then officially, you should only install it once on one computer.
Practically, (unless it has changed with CS4) you maybe able to install it on more then one computer, BUT can only run one instance of the software at a time. You can not run more then one instance of the software concurrently; i.e. you can't run Dreamweaver on Computer 1 and Photoshop on Computer 2. That would be two instances, and is not permitted.
This is my understanding. I am happy to be corrected if I am wrong
Fred
Sorry Fred you are wrong.
If you have a single license you can install it on as many computers as you like. you can only activate the suite on two computers at anyone time. Work and Home or as many of us do it Desktop and Laptop. You can not use the computers simultaneously. You only have 20 activation/deactivations so use them wisely. Student versions only have one activation. You can not break up the suite installs the suite is considered one application.

How many Laptops can I use BT sport on?

Can I use BT sport on the mrs laptop and my laptop or is it linked to only 1 machine? How many machines can be used?

legitimise_sailing wrote:
Limited to 2 simultaneous streams.
But no limit on the number of devices overall.
You can click the white star next to this message if you think it was helpful.

How many databases can be opened simultaneously in a single file?

To all:
I don't known how many databases can be opened simultaneously in a single file. After my application open 499 databases in a single file simultaneously, DB->open return error 12.(can not allocate memory ?).
How can i do ? Thanks.

I found it:
Berkeley DB Reference Guide:
Locking Subsystem
PrevRefNext
Configuring locking: sizing the system
The lock system is sized using the following three methods:
DB_ENV->set_lk_max_locks
DB_ENV->set_lk_max_lockers
DB_ENV->set_lk_max_objects
The DB_ENV->set_lk_max_locks, DB_ENV->set_lk_max_lockers, and DB_ENV->set_lk_max_objects methods specify the maximum number of locks, lockers, and locked objects supported by the lock subsystem, respectively. The maximum number of locks is the number of locks that can be simultaneously requested in the system. The maximum number of lockers is the number of lockers that can simultaneously request locks in the system. The maximum number of lock objects is the number of objects that can simultaneously be locked in the system. Selecting appropriate values requires an understanding of your application and its databases. If the values are too small, requests for locks in an application will fail. If the values are too large, the locking subsystem will consume more resources than is necessary. It is better to err in the direction of allocating too many locks, lockers, and objects because increasing the number of locks does not require large amounts of additional resources. The default values are 1000 of each type of object.
When configuring a Berkeley DB Concurrent Data Store application, the number of lock objects needed is two per open database (one for the database lock, and one for the cursor lock when the DB_CDB_ALLDB option is not specified). The number of locks needed is one per open database handle plus one per simultaneous cursor or non-cursor operation.
Configuring a Berkeley DB Transactional Data Store application is more complicated. The recommended algorithm for selecting the maximum number of locks, lockers, and lock objects is to run the application under stressful conditions and then review the lock system's statistics to determine the maximum number of locks, lockers, and lock objects that were used. Then, double these values for safety. However, in some large applications, finer granularity of control is necessary in order to minimize the size of the Lock subsystem.
The maximum number of lockers can be estimated as follows:
* If the database environment is using transactions, the maximum number of lockers can be estimated by adding the number of simultaneously active non-transactional cursors open database handles to the number of simultaneously active transactions and child transactions (where a child transaction is active until it commits or aborts, not until its parent commits or aborts).
* If the database environment is not using transactions, the maximum number of lockers can be estimated by adding the number of simultaneously active non-transactional cursors and open database handles to the number of simultaneous non-cursor operations.
The maximum number of lock objects needed for a single database operation can be estimated as follows:
* For Btree and Recno access methods, you will need one lock object per level of the database tree, at a minimum. (Unless keys are quite large with respect to the page size, neither Recno nor Btree database trees should ever be deeper than five levels.) Then, you will need one lock object for each leaf page of the database tree that will be simultaneously accessed.
* For the Queue access method, you will need one lock object per record that is simultaneously accessed. To this, add one lock object per page that will be simultaneously accessed. (Because the Queue access method uses fixed-length records and the database page size is known, it is possible to calculate the number of pages -- and, therefore, the lock objects -- required.) Deleted records skipped by a DB_NEXT or DB_PREV operation do not require a separate lock object. Further, if your application is using transactions, no database operation will ever use more than three lock objects at any time.
* For the Hash access method, you only need a single lock object.
For all access methods, you should then add an additional lock object per database for the database's metadata page.
Note that transactions accumulate locks over the transaction lifetime, and the lock objects required by a single transaction is the total lock objects required by all of the database operations in the transaction. However, a database page (or record, in the case of the Queue access method), that is accessed multiple times within a transaction only requires a single lock object for the entire transaction.
The maximum number of locks required by an application cannot be easily estimated. It is possible to calculate a maximum number of locks by multiplying the maximum number of lockers, times the maximum number of lock objects, times two (two for the two possible lock modes for each object, read and write). However, this is a pessimal value, and real applications are unlikely to actually need that many locks. Reviewing the Lock subsystem statistics is the best way to determine this value.
I created DB_CONFIG file, and add three lines:
set_lk_max_locks 20000
set_lk_max_lockers 20000
set_lk_max_objects 20000
As the default values are 1000 of each type of object, my applicaton open 499 database(except internal database) simultaneously(CDB modal) . After changed parameters, my application opend above 6000 database.

How many Ipods can you use with one Itunes account?

How many iPods can you use/sync with one iTunes account?

PT wrote:
Macistotle wrote:
Unless you have DRM still haunting your tunes ... Then you can only use those songs on 5 devices. Otherwise, connect as many as you like (as stated above).
No, you can sync your DRM tracks to an unlimited number of iPods (but only authorized to play on 5 different computers/user accounts)
Patrick
So I can sync two iPods to my iTunes account and sync the same digital copy movies that come with some o' my DVDs to both ipods? Do movies make a difference really, DRM-Wise? Thanks in advance.

When I buy Logic 9 from the appstore. On how many Macs can i use it?

When I buy Logic 9 from the appstore. On how many Macs can i use it? Can I install it twice with the same serial number?

On all your personal Macs.

How many computers can i use with creative cloud?

how many computers can i use with creative cloud?

Two.
From the Creative Cloud FAQ here http://www.adobe.com/products/creativecloud/faq.html under the section Purchasing and getting started:
On how many computers can I install the software I download from Creative Cloud?
You can install the desktop applications available in Creative Cloud on your primary computer and one backup computer, as long as they are not running at the same time. You will have access to both the Mac OS and Windows versions, so if you have a Mac at home and a PC at work, for instance, you can install your applications on both. See the product license agreements page for more information.

How many computers can i use my subscription of Muse on?

how many computers can i use my subscription of Muse on?

With a single subscription of Muse, you can run Muse on two individual Machines.

Offline updates mechanism: how many times can you use it before corrupting the image(wim)?

Hi,
As title mentions: "how many times can you use sccm 2012 offline updates for the wim file before corrupting the image(wim)"?
J.
Jan Hoedt

In my experience the offline servicing feature is only OK and too unreliable for production.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

With the online package of PS/LR, how many machines can I use this on?

With the online package of PS/LR, how many machines can I use this on? Can I have it at work and home?

2 Computer License http://forums.adobe.com/thread/977272

How many times can you use the serial number to download the cd

help how many times can we use the serial number to download the cd photoshop elements 11

Download Photoshop Elements products | 13, 12, 11, 10
Mylenium

How many times can u use an app?

hey! i have purchased many ipad apps
im about to get a second ipad and i want the apps on both using just the one purchase of them (one account)
my question is how many times can u use an ipad app with one purchase? i kknow with music it says 5 copies but how many with apps?

Do you and your wife share the same itunes account or do you each have one? If you share the same one - say both you and she log in as [email protected] into itunes, then every device you sync up with itunes will share the same apps - provided they're compatible.
For example, I had an ipod touch for over a year then got the ipad, all my touch apps transferred to my ipad when i set it up. I could then go in and delete the ones I didn't want on the ipad. And if I were to also get an iPhone, I could sync any existing apps that I have bought that are compatible with the iphone to it.
Theoretically, if i had 20 ipads for a classroom, I could use one itunes account and put the exact same apps on all 20 of them.

How many times can i use the limited warranty on my Apple iPhone 5, I just broke mine after getting a brand new one. Also, can I extend my warranty?

How many times can i use the limited warranty on my Apple iPhone 5, I just broke mine after getting a brand new one. Also, can I extend my warranty?

If you purchased AppleCare + within 30 days of getting your iPhone 5 you are allowed 2 instances of breakage replacement with a $49 deductible. If you do not have AppleCare + accidental breakage is not covered under you warranty, you can do an out-of-warranty replacement for $229.

How many devices can you use on an airport express wirelessly?

How many devices can you use on an airport express wirelessly? Does it matter how many devices you have?

The Express supports up to ten clients.

How many vpn can be used simultaneously in Azure?

Similar Messages

Maybe you are looking for