How may i forbidden that movies automatically start with sound when the mouse run on images

Every thing is in the title

It's rather unintuitive, but start a video playing and click the "shrink" icon in the on-screen control bar (right end, the two facing arrows) to reduce the playback from full screen down to a window. Then go to the View menu, select "video playback", and set it to "in iTunes Window" or "in separate window" as you prefer.
Regards.

Similar Messages

How can I set the audio conference to automatically start AS HOST when the meeting starts?

I can easily setup an audio conference for any meeting, and set that conference to start. However, there doesn't seem to be a way for the conference to start as the moderator (or, host) when the meeting starts. This means I still have to dial in to the conference with a land line or cell phone and enter my host code to get the audio conference started.
The only audio conference provider at my company is The Conferencing Center. I don't seem to have a TCC account. What do I do to get this working? It's nuts to have to use a land line just to get the audio going.

There are a number of integrated audio providers other than TCC, and those can be enabled in the Admin section of Connect. However, using the fully integrated bridge does still require that a Host/Leader be dialled in before audio will broadcast (or something other than hold music).
If you don't want to have to call in, I'd recommend that you use Universal Voice to tell Connect the dial in steps and give it the Host/Leader pin.Setting Up Universal Voice - Adobe Connect User Community.
The downside to this is that there will no longer be a dial out option for participants.

Automatic start with JWS/JNLP

Hi all,
Is it possible to use JWS/JNLP to automatically start my application when the computer start or when the Windows session is opened, and how ?
Thanks,
Xavier

You should be able to approach this just as you would with an applet. Just write an applet that interacts with your servlet and then you can write a JNLP file for the applet using the <applet-desc> tag.

How do I format a document in Pages 5.2 so that each sentence automatically starts with capital letter?

How do I format a document in Pages 5.2 so that each sentence automatically starts with capital letter?

If you installed the Devon Technologies (Freeware) WordService Service package, there is an item that will enable you to fix selected content to show initial capitals in sentences. You may need to enable this feature in the System Preferences > Keyboard > Shortcuts > Services selections. This only works in Pages v5.2 (and maybe later releases).

How can i disable imessage from automatically starting up when i turn on macbook air?

how can i disable imessage from automatically starting up when i turn on macbook air? i dont know my imessages to pop up on my laptop when it turns on. But i dont want to disable imessage totally on my macbook.

Welcome to the Apple Support Communities
First of all, check that Messages is closed when you turn off your MacBook. This is so important because, by default, OS X will reopen all opened apps the next time you start your Mac.
Apart from that, when you go to  > Shut Down, or  > Restart, in the window you see to restart or turn off your MacBook, unmark "Reopen windows when logging back in". This will avoid that your Mac opens all opened apps the next time you start the MacBook, so Messages won't start automatically at startup

I have a dial up connection and I'm looking for a download accerator that will automatically start when the download(update) starts.

I have a dial up connection. When I get a program update that
may be 100M in size it can take a lot of time. I'm looking for a
download accelerator program that will automatically start in
this kind of situation. I know there are programs that if you
know the site and the name of the download you want, you put
this info in and the accelerator program works. But there is
no way that I can figure to put this info in when a program
tells me an update is available and then starts a 7hr download.

That's the size of Firefox Setup 6.0.2.exe, which I started to download but figured there had to be more.
So, you're saying that once that downloads and you run it, there's nothing else to get online? I could run Firefox Setup 6.0.2.exe successfully while not connected to the Internet?

Installing / upgrading from Flash 10.1 to Flash 11 in Android. How may I do that?

Hello,
I got my new tablet, and I am having problems to browse facebook. I can browse it perfectly, but I cannot see the videos of the walls, it says I need a flash upgrade and that I must press over the video to jump to the adobe website, to detect my operating system and browser.
Okay.
I do that, and it says I have a Mac OS X
That is not true!!! I have Android 2.2 !!!
So it is clear the automatic recognition don't work at all and I have to install the new Flash 11.
Okay... I am very confused about this, and I want to do this safely.
First doubt, where may I get the original Adobe Flash APK file with Flash 11 ?
There are a lot of websites that provide APK in a doubtful manner... and well, I'd rather prefer to enter in an official place from Adobe, and download Flash from there. But without automatic recognitions, I just want to download Flash 11 for Android.
How may I do that?
THIS TABLET DON'T HAVE ANDROID MARKET SUPPORT, so I cannot get the APK file from Market.
There are many many tablets that don't support market, and they also need flash to browse the web.
Second doubt... do I need a specific version of Flash for my browser?
How may I know what browser I have installed? I tried to verify this in my tablet and I have no idea of how to do that?
My tablet is this:
http://www.hannspree.com/Global/Product/TabletPC/HANNSpad/SN10T1/
http://www.hannspree.com/HSPv3Images/MicroSite/Hannspad/EU/index.html
I really would appreciate your help with this.
Thanks

Very nice text, I've read it.
And well ? what happens? Don't understand.
I even cannot upgrade from Flash 10.1 to Flash 10.3
If are you telling me that Flash 11 is for Android 3 that is not my main problem, because I even cannot upgrade from Flash 10.1 to 10.3
So if Flash 11 is for Android 3 ok understood.
But how may I update from Flash 10.1 to Flash 10.3?
I still having the same problem, I cannot upgrade.
When I activate the Merkamarket (an alternative Market) it detects I have Flash 10.1 and recommend me to apply an update to Flash 10.3
Okay, I apply the update, and cannot be installed.
So I need a way to update the dinosaur (Flash 10.1) to something more recent as Flash 10.3
Also... I dont understand why Adobe don't provide a link to download the APK files of Flash 10.1 or Flash 10.3 ?
All the APK files must be find in alternative websites, but not in the website of the maker (this)
I dont understand that. Why?
If you or someone can guide me step by step about how to upgrade a bit my Flash 10.1 to Flash 10.3 (assuming Flash 11 be just for Android 3) I'd be grateful.
Thanks

I have an iPhone 5 and if I make a call it goes blank hangs up on the people and then proceeds to facetime them automatically. Does anyone know how to fix this? It only started with ios7

I have an iPhone 5 and if I make a call it goes blank hangs up on the people and then proceeds to facetime them automatically. Does anyone know how to fix this? It only started with ios7

Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Unfortunately, we may have to wait until Apple is more forthcoming with information.
http://www.apple.com/support/systemstatus/

If I purchased a movie, from a computer a LONG time ago like 3 years but recently I changed computers how can I get that movie back? p.s. I bought the movie from iTunes

If I purchased a movie, from a computer a LONG time ago like 3 years but recently I changed computers how can I get that movie back? p.s. I bought the movie from iTunes

If you don't have the movie on the old computer and you don't have the movie backed up on a disc somewhere, your only choice is to purchase the movie again. Currently, movie downloads are a one time deal andit is your responsibility to have a backup copy.
If you have the movie on the other computer still, you can burn it to a DVD and then copy it over to the new computer.
Personally, I have two computers and when I make a purchase on one, iTunes automatically copies it to the other and I have never lost videos or music in this manner.

I'm trying to get in touch with apple via email how may i do that can you guide me through

i'm trying to get in touch with apple via email how may i do that can you guide me through

Contacting apple for support can be initiated here: https://getsupport.apple.com/

I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

Labview isn't cheap, but it would certainly allow you to build a program (set of vi's - virtual instruments) that would do what you describe. Where would the timecode information come from? Your vi, or program, would: Start up, initialize the serial port, loop until a trigger happened, read the timecode (from where?), output that timecode out the serial port in a loop until you pressed the stop button. There is a free evaluation of Labview software available from NI - the base product itself runs about $995.
- Dave

I deleted the photos from my iPhone 6 that were synced from my computer automatically but it is still using my storage. How do i fix that? I have tried all of the steps listed in the community.i have the new iTunes 10.

I deleted the photos from my iPhone 6 that were synced from my computer automatically but it is still using my storage. How do i fix that? I have tried all of the steps listed in the community.i have the new iTunes 10.

Hi QuisB123,
If you are having an issue with reclaiming free space after deleting photos from your iPhone, use the steps in this article to assist -
If you get a "Not enough free space" alert on your iPhone, iPad, or iPod touch - Apple Support
Specifically -
Orphaned files might remain on your iOS device if it's physically disconnected while syncing music, podcasts, videos, or photos. This can prevent iTunes from syncing the iOS device on subsequent sync sessions. When this happens, you might see a large amount of "Other" disk usage for the iOS device in the Capacity indicator in iTunes. Try these steps:
Turn off the music or photo sync option in iTunes for the device.
Click Apply to sync the changes to the device.
Turn the music and photo sync options for the device on again.
Click Apply again to try to sync the device to iTunes. If you see the "Not enough free space" alert, continue to step 5.
Turn off the automatic syncing functions for the iOS device:
Select the iOS device from the iTunes window and click the Summary tab.
Deselect "Automatically sync when this device is connected" and select the "Sync only checked songs and videos" checkbox.
Click Apply to sync the changes to the device.
Reduce the amount of data that is being synced to the device and resync the device. For example, if syncing your Music library exceeds the memory capacity of the device, choose "Selected playlists" to transfer rather than "All songs and playlists" under the Music tab in iTunes. If you see the "Not enough free space" alert, continue to step 6.
Restore using iTunes.
Thanks for using Apple Support Communities.
Best,
Brett L

How can i arrange that movies and picts are stored only once?, how can i arrange that movies and picts are stored only once?

how can i arrange that movies and picts are stored only once?, i find them in thumbnail, i movie, imovie thumbnails, and some times in cache.mov or as imovie proyects

The movies themselves are stored only once. The other files you're seeing are small ones that are used to reference, display and access the main file. If you check the file sizes, you'll see that only one (the movie file itself) is large.
If you don't want anything saved but the main file, stop using iMovie.

How could it happen that there was a wrong FIRMWARE on the HP side?

Hey,
I've bought a HP LaserJet Pro 200 color MFP M276nw.
I checked for a new firmware
1.
downloaded the latest one: M270_colorMFP_Series_FW_Update-20140718.exe
2.
I started the exe file while working in a WiFi NETWORK
2.1 - chose the printer
2.2 - got a SMILE
2.3 - checked the system info: FAILED: old FIRMWARE 20121026
Printer firmware update failed, nothing happened.
3.
I started the exe file while working in a WiFi NETWORK
3.1 - chose the printer
and after a quarter of the installation I saw an "error 65" displayed on the printer screen
3.2 - but still got a SMILE at the end
3.3 - checked the system info: OLD FIRMWARE 20121026
Printer firmware update FAILED, nothing happened.
4.
I started the next try with USB connection
4.1 - chose the printer
and after a quarter of the installation I saw "BLACK printer screen"
4.2 - but at the end I still got a SMILE from the laptop Software
4.3 - checked the system info: OLD FIRMWARE 20121026
Printer firmware update FAILED, nothing happened.
5.
Meanwhile I had searched the web for "error 65" and found a disussion 2 few weeks ago, where there was metioned that error 65 displayed on the printer screen.
There was mentioned that the downloaded firmware was wrong and that there should have been only one firmware on the website and that the latest was wrong, "20140521" should be the only one.
I started the next try with USB connection and that bigger "20140521" exe file
5.1 - chose the printer
5.2 - then I saw something like "programming" what sounded somehow better
5.3 - the display went again black while the app on the laptop was still running
5.4 - again there was a "programming" screen displayed
5.5 - the display went again black
5.6 - but then the printer rebooted while the app was still running .
5.7 - a few moments later the laptop firmware app was done and the SMILE came back
5.8 - checked the system info: NEW FIRMWARE
AFTER ALL IT TOOK ME MORE THAN 4 HOURS just to update that FIRMWARE.
I still don't know if that firmware is fixing my problem of backing up and restoring Printer Configurations.
I don't like the fact that it seems that I am not able to save the complete configuration or at least each configuration segment like it should be possible for the "eMail Adressbook"
There is much more work to be done inside each network configuration (Networkname, Fileprefix, Format, resolution, ...),. Therefore it would be very useful to have a backup especially if you have to exchange units .
Why isn't this backup feature available for FAX Adresses & Network Buttons?
HOW COULD IT HAPPEN THAT THERE WAS A WRONG FIRMWARE ON THE OFFICIAL HP SIDE?
HOW CAN IT BE THAT EVEN THE SUCCESSFULL FIRMWARE UPDATE PROCESS WAS THE TOTAL OPPOSITE OF something you would call smooth?
There was no message on the PC telling something about what was going on on the HP 200 printer, the programming, black displays, reboot and nothing was synchronized between the firmware app and the printer display.
The TCO of this unit have exploded for this tiny firmware update I had done before on other equipment over 15 years.
I can't believe that the app is state of the art and that the quality assurance is on the right track if there is a wrong firmware on HP's website.
I am really unsatisfied and still hope, that the firmware update will deliver a better success than I had the whole eveing.
WOLF

Hey,
so after 3 month nothing has been cleared.
I got several phone calls from a terribly bad german speaking support center (may be polish orign) agent , therefore I could not understand her easily and she had no technical expertise or skills. I answered all her questions.
Later I got a support eMail in german where she was speaking about an "ELIVIERUNGSTEAM"
That is an in german unknown word probably she meant "EVALUIERUNGSTEAM" which means EVALUATION TEAM.
So I got that answer from that TEAM in late December 2014 and replied after christmas.
I received an eMail that HP received my answer but nothing happened until today.
We have several devices with the same issues and I do not want to hear or read that HP tries to tell me that it is my problem. It is an problem which occured under each browser they asked me to perform the steps - chrome, firefox, ie ...
And it occures on all printers of that series and on all laptops.
HERE IS THE LAST MESSAGE WHICH ANNOUNCED A REPLACEMENT BUT I AM STILL WAITING
HERE IS THAT MESSAGE:
Antwort unserer Elevierung [ ref:_00DG0h8qk._500G0bDLRI:ref ]
Sehr geehrter Herr Bxxxxxxxxxxxxxx,
anbei die Originalantwort unseres Elevierungsteams. Sollten Sie eine deutsche Übersetzung benötigen, so bitten wir um Rückmeldung:
Thank you for the escalation. We are able to save the email as well as fax phone book and restore it. The files saved are in .csv format. As for the firmware on the website, we are looking into it on a priority basis, as a number of product firmware listed are incorrect. We expect the error to be rectified soon, I shall keep you updated. If the customer has tried updating the printer firmware and as a result of it he is having the issue, then please replace the printer for the customer and check for the issue.
With Regards
Ich hoffe Ihnen mit diesen Auskünften weitergeholfen zu haben.
Mit freundlichen Grüßen,
Ihr HP-Laserjet-Support
WHO IS RESPONSIBLE FOR THIS SUPPORT UNIT AND THAT WHOLE TASK ?
I NEED SOLUTIONS CAUSE HERE ARE SEVERAL MACHINES WITH ALL THESE PROBLEMS BECAUSE WE MADE THESE UPDATES OF THE HP FIRMWARE

I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then the screen goes black, and "sleep" light pulses.

I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then goes black. The sleep light pulses. From there, I can't turn it off normally. I have tried restarting the PMU. And I have tried unplugging the ac adaptor and removing the battery. From there I have plugged only the ac adaptor in, and it will begin to start but do the same thing once it shows the blue screen.
I tried only using the battery (without plugging in the ac adaptor) and the same thing happens. I tried starting the computer while holding down CTRL, Option, P, and R, waiting to hear the start up chimes 3 times, and then holding Shift as it starts up. But I still get the black screen once I see the blue one, and the computer's sleep light pulses.
I need something very important from this computer. And was able to start it last night. I did not shut down the computer, and was going to take it to a friends to use his printer today. The computer was in sleep mode in the morning.
Thanks for any help!
Gina

What your describing could be a logic board or memory issue.
You did or did not hear 3 startup chimes? If you hear 3 chimes when you start it, that would indicate a memory problem. Try reseating the memory to see if that makes a difference. If you have 2 RAM cards, try one then the other in each slot. If you have 1 RAM card, move it to the other slot. Powerbooks can develop one bad slot.
You may need to pull the hard drive out of the Powerbook, put it into an external case, then read it from another mac.

How may i forbidden that movies automatically start with sound when the mouse run on images

Similar Messages

Maybe you are looking for