How Merge Temp File With Photoshop File

Hi Friends,
I Deleted Temp File, And Now get A Error when open photoshop file " Could Not Complet ... is not a valid photoshop format " and my file size is 60mb
and i have temp file that size is 2.50GB but How Merge Temp File With Photoshop File?
Thank you So Much

You can search for recovery programs  but most likely if it a temp file is not an image file.  You could also try renaming the file to have an image file type and try to open with Photoshop. Again its most likely not an image file. Photoshop only supports some image files formats.

Similar Messages

  • How can i turn a photoshop file into a website with knowing code? can i upload Muse or DreamWeaver?

    How can i turn a photoshop file into a website with knowing code? can i upload Muse or DreamWeaver?
    I created a few images (pages for a site) on photoshop and want to turn them into HTML code for a website- Can i Just upload the file into one of these programs and make a file with the correct code imediatly?
    I was reading about using EDGE Reform but i did not understand if i can create the code with it, in the end it says it still needs to be sent to website developer after?

    You need to look at Dreamweaver as a code editor. You need to learn to create good, clean HTML code with style sheets to make websites with Dreamweaver.
    There are tutorials that will take you from a layered .PSD file to HTML. Here's a good one:
    http://net.tutsplus.com/tutorials/site-builds/from-psd-to-html-building-a-set-of-website-d esigns-step-by-step/
    Adobe's Muse is a semi-WYSIWYG website layout creator for small websites (1-5 pages). But there is no way you can go from a .PDS file to Muse, you have to start the site in Muse.
    I have seen a few Muse sites and they're OK, but there is some code that Muse creates that is kind of odd. If you want a good, clean website that will work for you or your business, Dreamweaver is the best choice. Alternatively, you could hire a pro.
    -Mark

  • Opening iPhoto 8 JPG file with Photoshop CS3 Camera Raw editor

    I have all my photos stored in my iPhoto 8 library. I have both RAW (CR2) and JPG images. iPhoto 8 opens the CR2 images with Photoshop Raw editor, but I want to use iPhoto to open JPG images with the Photoshop Raw editor using Camera Raw.
    How do I do this without having to export JPG images and opening from Photoshop?
    Thanks!
    SP

    SP:
    If you're trying to use the RAW editor on a jpg it can't be done. It will only work on the RAW file. If you are wanting to edit the RAW file from within iPHoto with CS3 then set CS3 to be the editor of choice in iPhoto's general preferences. Next go to the Advanced iPhoto preference pane and select the option "User RAW when using external editor". That will open the RAW file with Photoshop's raw editor. When you finish you MUST save the new file to the Desktop and import as a new file.
    For some general info on using Photoshop with iPhoto:
    Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
    1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
    If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: iPhoto 8's new option in it's rebuild library window, "Rebuild the iPhoto Library Database from automatic backup" may make this tip obsolete. We'll know when users have occasion to use it and see if that's the case.

  • How do you change a photoshop file back to an .eps extention

    I am trying to help a user convert a photoshop file back into an .eps file. She was unable to open the ,eps file so I installed the Premiere Elements 13 to her workstation and point the file to open with  Premiere and now it changed all her .eps files to photoshop files. How do I convert back?

    You can't do that using Photoshop it being a raster based application. In order to convert back to a vector based eps file you will have to use Illustrator and do a bunch of things to recreate the vectors.
    If you save to eps in Photoshop they will not be vector based files.

  • Is there any photoshop API functions can let me open a file with photoshop in my plugin?

    I used  the function system("open file"), it works well in any other program.
    For example, system("open 1.psd"), this code can use photoshop open the file 1.psd .
    But it just don't work in my plugin program.
    How can I use photoshop to open a file in filter plugin at Mac OS X?
    Is there any photoshop API functions can let me open a file with photoshop in my plugin?

    Go to settings> general and scroll down to multitasking geastures, turn them on and by swiping with four fingers from the right side of the iPad to the left and back you can switch between apps. I think this is what you need I'm not sure, I hope it helps

  • Adobe Bridge CC crashes when opening file with Photoshop CC or Camera RAW!

    Adobe Bridge CC crashes when opening file with Photoshop CC or Camera RAW!
    - Tried to Reset the preference with CTRL + Click.
    - It's just new clean install didn't do anything with it yet.
    - Windows 8.
    Any help?

    Just that one project, or any project?  Can you create new projects?

  • An attempt to open a pdf file with Photoshop Elements (version 12) resulted in a pop generated by the Photoshop Editor stated "Impossible to execute this operation (opening file) because one of the specified colour is not managed". Is there any mean to ad

    An attempt to open a pdf file with Photoshop Elements (version 12) resulted in a pop generated by the Photoshop Editor stated "Impossible to execute this operation (opening file) because one of the specified colour is not managed". Is there any mean to adapt the file to make its reading possible?
    Did somebody get the same problem?

    It is a high order probability that your SQL's report generator is creating the PDF, not Acrobat (which by design and EULA cannot be used in as/with server).
    That the report generator outputs to an old-old version of PDF bears this out.
    Wiki articles on PDF are very nice for those high level intro summaries.
    To know / understand PDF you purchase and study the ISO Standard for PDF (ISO 32000-1:2008).
    Rather than "PDF validation" you may want to consider addressing the appearent root cause of the problem(s).
    You can change the email2fax application to one that can deal with older PDF versions.
    You can change the report generator to one that can output to the ISO Standard.
    (Perhaps the in-use application can be configured to output to the current version of PDF (i.e., the ISO Standard).
    Be well...

  • How to use javap with jar files ?

    how to use javap with jar files ?
    thanks

    As long as the jar is on the class path, your gold. So,
    javap -classpath myjar.jar mypackage.MyClass
    Chuck

  • I can't open D7200 NEF file with Photoshop CS6. I checked the updates and there are no updates available. What do I do?

    Hi,
    I can't open D7200 NEF files with Photoshop CS6.I checked the updates and there are no updates available.What do I do?
    Nitin

    For the time being, shoot JPEG images. At this time there is no support for NEF files from the D7200 in any Adobe product. It was released at such a time that it wasn't included in the last Camera Raw update. And Lightroom hasn't been updated either. Consequently, there is no DNG converter available at this time. We will have to wait and see what programs will be able to accommodate the D7200 when Adobe releases updates or upgrades that support the camera.

  • How i can deal with oracle file by using php api

    how I can deal with oracle file by using php api ?

    What has this to do with Reflections and Reference Objects?

  • Associating image files with Photoshop

    I'd like to associate jpg or raw files with Photoshop, whereby I can click on the image file and it will launch directly into Photoshop.  When I try to associate through Windows 8 it fails to find Photoshop CC as an option to open any form of graphic files, yet I can open PS CC directly and then open the files, or go through Bridge.   Thanks.

    I find in windows two thing need to be set correctly for that to work like you want. First the file extension associations must to set to ypir Photoshop version and the windows registry keys for photoshop.exe shell commands open and edit must be set correctly. 
    File associations may be checked and changes with the control panels default programs file association application and the registry keys can be checked. and modified with regedit.

  • How create 1 dvd with 2 file

    how create 1 dvd with 2 file

    As you probably know,  DVD creation in Compressor and FCPX is very limited – and it only accommodates single tracks.
    But there is no reason why you can't put multiple movies on a single timeline in FCP. Separate them with inserted gaps and add chapter markers to provide some level of navigation among them.
    Good luck.
    Russ

  • Using subtitle SRT files with FLV files

    Pretty much the way the summary states. Needs to embed srt
    files with flv files in actionscript. Anyone know how?

    Ouw-wee! Photoshop 2 on System 6?
    Do you have the files transferred to newer media or are they still on the System 6 Mac?
    If they are still on the old Mac your options are limited, only diskettes worked on the old machines and SCSI hasn't been available on Macs in years..
    Since Photoshop didn't have layers until PS 3.0, even if you get them open, they are single layers only.
    Do you happen to know the file format they were saved as?
    Good Luck!

  • File-New-Photoshop File is Grayed Out

    Hello Every-One.
    I would like to create a Text Logo from the photoshop, To Premiere Pro CS5,  But when I go to File-New- Photoshop file, It Is Grayed out.
    Thanks
    simon

    I am sorry I forgot to select the project file. But the photoshop is still Grayed out.
    Here is the second screen shot.
    I do work with photoshop on a daily base.
    Simon

  • "File New Photoshop File" opens Preview instead

    Hi there!
    I am posting this question, because i couldn't find any solution in the FAQs or within PremierePro CS5.5. Plus i trust, that there's someone out there that knows the answer...
    Thing is, in a normal sequence I choose File > New > Photoshop File and Premiere asks the normal question about filesize and so on. BUT instead of opening Photoshop (I have PS CS4), it opens the Program "Preview". Which doesn't help much since in preview you cannot even draw anything. I checked if i can just change that setting somehow to open Photoshop but no success...
    Anybody familiar with this? Would be great!
    Thanks,
    Syrtah

    Ok, then a little bit more precise:
    I am inside PremierePro CS 5.5 and there exists a function in the file menu (Link as above: File > New > Photoshop File...) that directly opens a photoshop document with the size, pixel aspect ratio and framerate of my current Premiere sequence. So i click on that and Premiere is supposed to open Photoshop. Instead it opens a program, that is called "Preview" (i'm working on a MAC, i forgot to mention that before, sorry). Now Preview is only good vor previews and not for editing images.
    To put it in other words, my problem is, that Premiere should open Photoshop and generate a new file fitting to my sequence, but instead it opens Preview.
    Of course, I could open a new PSD-File in Photoshop but then i would have to manually type in the size of the image and so on. And since there is a built-in feature in Premiere, i would like to use that instead of going the long way.
    So basically i am searching for the place where i can "tell" Premiere which graphics program to open.

Maybe you are looking for