How MES is effected with BTO,BTS,CTO and ETO manufacturing scenarios.

Does MES really gets impacted with following different manufacturing styles like BTO(Build to Order),BTS(Build to Stock),CTO(Configure to Order),ETO(Engineering to Order)...Whether SAP ME(different/latest versions) handles its separately if the production is happening as per BTO,BTS,CTO,ETO scenario.
If its affecting MES then how it does it and how the integartion with different systems ERP,PLM,PDM,LIMS,SCM is dealt in each scenario .

Manufacturing Execution Systems (MES) are IT solutions that support the primary production processes in a production plant. These applications close the gap between ERP systems and production equipment control or SCADA (Supervisory Control And Data Acquisition) applications.
MES will be used to pass the real time Data in Shop floor in to SAP,
In SAP ME
Master data:
Master data detail is transferred from SAP R/3 to SAP ME, data such as material master, BOM, routing, Production order is transferred from r/3 to SAP ME thru IDOC/BAPI
Transaction data:
Real time data is Collected from the SCADA or from controller is send to SAP ME, From SAP ME, the data is transferred to R/3 by using BAPI/IDOC
separately if the production is happening as per BTO,BTS,CTO, ETO scenario
while transferring the prdn order from R/3 you can also send infrm such as Customer/project

Similar Messages

BTO,BTS,CTO and ETO Manufacturing Scenarios impacting MES or not?????????

Hii Everyone...Wish u all a very happy new year 2011.CAn u all pls help me get some informations on different manufacturing startegies and regarding the same my query is mentioned below:-
How does different manufacturing Scenarios like BTO,BTS,CTO and ETO impact implimentation of MES system.
How is the interface of MES with ERP,LIMS,PDS,PLM,Equipments and SCM,CRM systems.Whether the interafce changes considering the scenarios like ETO,BTO,BTS,CTO.

Hi KRajiv,
I would say that either of those production strategies can be maintained in SAP ME solution, however, this tool is responsible for technical implementaion of the strategy rather then for its design. So, you will not find a document with step-by-step instructions for each of those strategies with pointing to difference between them.
Currently, SAP ME has interface with ERP only.
I would suggest that you consult "Business Scenario Description SAP ME 5.2" available on SMP:
https://websmp209.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000722058
Regards,
Sergiy

How to add effects with snow?

How to add effects with snow like Apple does when the introduce a new product?

Flex Builder Help. Basically pressing F1 in Flex Builder or
Help -> Help Contents menu option.

Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff

Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff

It is not possible to do that.
Allan

I've recently purchased a macbook but my iphone 4 is synced with another computer. How can I sync with my new computer and keep my information?

I've recently purchased a macbook but my iphone 4 is synced with another computer. How can I sync with my new computer and keep my information?

Sync the iTunes content from the iPhone to the new computer.
iOS: How to transfer or sync content to your computer
And... launch iTunes on the new computer. From the menu bar click Store / Authorize This Computer.

How Achieve timedseries calculations with out using AGO And ToDate function

Hi,,
1)
How Achieve timedseries calculations with out using AGO And ToDate functionion
this question asking in interview ..is it possible..?
if yes please response as soon as possible..
2) i have 2 cloumns Product and value...
client requirement is they need ranks based on Value ..in dashboard .using dashboard prompt..edit box...if user enter any number (ex :5 ) report should show top 5 ranks if he enter 20 should be top 20 ranks..
how to achive this ?
thanks,
raj

Consider yor first question:
1. Yes, we can create timeseries measures without using AGO and TODATE
1. Create ALIAS of fact tabe in the physical layer
2. Join the Time id from the ALIAS fact table with the YAGO_MONTH_ID column from your time dimension table (For calculating Year Ago variants) similarly join with MAGO_MONTH_ID column for Month Ago measures.
3.Pull the ALIAS tables as an additional Logical table source in the Lgical layer
4.Keep the mapping of the columns from the ALIAS table as its is
5. For e.g If you pick Revenue from the Year Ago Alias table it will give you the "Prior Year Revenue"
See if this helps you

Can i use After Effects with FC4?! And how?

Hello! For a while i thought you could not use Adobe after effects with Final express...but i was wondering again if i can use it, and if i can, how do i use it with FCE?? Thanks!

Well after AE, i can continue editing it in final cut? Or once i use it in AE, it is too late to put the sequence or scene back into FCE?
I guess an example would be that if i just want one scene or one sequence from final cut to be used in AE, i would export that sequence as a QT movie? Then how do i put it back into Final Cut once it is done with AE?

How to sync ical with multiple apple devices and android?

Does anybody have use an android phone in addition to apple devices, and have you figured out how to sync ical with all? (I know there are other calendars that can be used by all, but it means a lot to my husband to stay with ical.)

I tried Yahoo in the past but had trouble with duplicate entries. However, this was a while ago before Yahoo updated their site and this was with syncing to a Windows computer with Outlook in addition to a Mac so my results might not be typical. Yahoo's worth a shot, but my experience with Yahoo is why I use Google Calendar.
Beyond that, I don't know of any other "free" services. There are many other hosted calendar sites that could work, but you'd pay something like $5-$20 per month, which is comparable to MobileMe.

How to track calendars with multiple devices apple and droid

I have a iPhone 5 and iPad but would like to find a way to communicate my calendar with others using apple and droid products. How would I do that?

Sync your calendar with iCloud, then share it publically as explained here: http://help.apple.com/icloud/#/mm6b1a9479. This allows non-iCloud users to view the calendar (but not edit it).

How to use wsit with jeveloper for developing and testing web servises

hi, all. Just want to ask one realy simple quastion.
I'm new with web servises, so my question may be doesn't fall well into this section , but this community looks friendly for me and i hope to get some usefull links and advises.
First of all could anybody say me if i'm righ or wrong with the following suggestions:
1. What is the principal difference between axis 2 and wsit products? Do i understand right that they both extend or support so called jax-ws2 API and represent different approaches in that (are they competitors?), or this products serve for different sakes at all and could be used together? I want to understand without much digging how these products correlate with each other...
2. If i'm right what is oracle favor? And if oas standard supply doesn't include wsit, how to install and use this product for creating interoperable web servises in jdeveloper enviroment? ...or jax-ws 2.1 wasn't included in oc4j v10 and will be the part of v11 only?
Thanks in advance. Alex.
Message was edited by:
Timin
Message was edited by:
Timin

Both Axis and WSIT are not Oracle products - so I'm not exactly sure why would you post the question here.
JDeveloper has native support for JAX-RPC based Web services development in 10.1.3 and JAX-WS support in 11 - check out the online demos linked from the home page to see these in action.

HT204074 I have been reading about how to associate devices with my Apple ID, and the info says I can go to my account through iTunes to find "Manage Devices" but that does not exist. Either it was phased out our there are other ways to get there, but can

I am trying to find out about all my associated devices. I recently got a message that I had used my last device, and am not sure how this can be. The instructions for accessing the info via the iTunes account info page apparently were not shared with the programmers since there is no Manage Devices button or option as far as I can see. How do I do this?

After hours and hours of failed searches, I must have used a different keyword in my Google search, and here is the website that I was looking for:
https://supportprofile.apple.com
And here is the guy whose website I found that helped me solve my problem:
http://www.marcomc.com/2011/01/how-to-find-the-list-of-my-apple-registered-produ cts/
I was going to rant here about how badly Apple designed their "Apple Id" stuff, how they strongly distinguish between using your Apple Id at the online Apple Store vs. using it at the App Store (which you have to get to via iTunes ... quite ridiculous) ... but I won't. :-)
Anyway, I hope that the two previously mentioned websites will be of help to others.

How to sync icloud with windows 8.1 and ipad 4

How do I sync Icloud with Windows 8.1 and Ipad4?

Hi gemret,
Welcome to the Apple Support Community!
To be able to sync your information across your Apple devices and your Windows computer, you will need the iCloud for Windows 4.0 control panel. Please use the following Apple link for information and download link for the control panel.
iCloud for Windows
Cheers,
Joe

How to display data with the same text and key in the drop down list?

Hi All,
Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
REPORT ZTESTING.
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
      LIST TYPE VRM_VALUES,
      VALUE LIKE LINE OF LIST,
      c(20) type c.
*      c = 'select any'.
data:begin of itab occurs 0,
      kunnr like kna1-kunnr,
      name1 like kna1-name1,
     end of itab.
data:begin of jtab occurs 0,
      kunnr like kna1-kunnr,
      land1 like kna1-land1,
     end of jtab.
PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
                          default 'SELECT'.
AT SELECTION-SCREEN OUTPUT.
NAME = 'p_list'.
VALUE-KEY = 'Name'.     "---> Data for key is the same with text
VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
APPEND VALUE TO LIST.
VALUE-KEY = '2'.
VALUE-TEXT = 'Country'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
start-of-selection.
select kunnr name1 up to 20 rows from kna1 into table itab.
select kunnr land1 up to 20 rows from kna1 into table jtab.
case p_list.
when '1'.
loop at itab.
write:/ itab-kunnr,itab-name1.
endloop.
when '2'.
loop at jtab.
write:/ jtab-kunnr,jtab-land1.
endloop.
endcase.
<Added code tags>
Moderator Message: Please use the "code" tags to format your code snippet.
Edited by: Suhas Saha on Nov 17, 2011 11:19 AM

shawnTan wrote:
Hi All,
>
> Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
>
>
REPORT ZTESTING.
>
> TYPE-POOLS: VRM.
>
> DATA: NAME TYPE VRM_ID,
>       LIST TYPE VRM_VALUES,
>       VALUE LIKE LINE OF LIST,
>       c(20) type c.
>
> *      c = 'select any'.
>
> data:begin of itab occurs 0,
>       kunnr like kna1-kunnr,
>       name1 like kna1-name1,
>      end of itab.
>
> data:begin of jtab occurs 0,
>       kunnr like kna1-kunnr,
>       land1 like kna1-land1,
>      end of jtab.
>
> PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
>                           default 'SELECT'.
>
> AT SELECTION-SCREEN OUTPUT.
>
> NAME = 'p_list'.
>
> VALUE-KEY = 'Name'.     "---> Data for key is the same with text
> VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
> APPEND VALUE TO LIST.
>
> VALUE-KEY = '2'.
> VALUE-TEXT = 'Country'.
> APPEND VALUE TO LIST.
>
> CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
>
> start-of-selection.
> select kunnr name1 up to 20 rows from kna1 into table itab.
> select kunnr land1 up to 20 rows from kna1 into table jtab.
>
> case p_list.
> when '1'.
> loop at itab.
> write:/ itab-kunnr,itab-name1.
> endloop.
>
> when '2'.
> loop at jtab.
> write:/ jtab-kunnr,jtab-land1.
> endloop.
> endcase.
>
> <Added code tags>
>
> Moderator Message: Please use the "code" tags to format your code snippet.
>
> Edited by: Suhas Saha on Nov 17, 2011 11:19 AM
This surely seems to be a bug to me(if not by design), did you check for any SAP notes? Perhaps a front end trace can help(Note 407743) !
-Rajesh.

How to synchronize iPhone with iTunes in Mac and BootCamp.

Hi,
I have a Macbook Pro and recently I purchased an iPhone. For work reasons I use windows as well as Mac OS ( I prefeer MacOS by in my company we develop windows software...)
The problem is that I synchronized my iPhone with iTunes in Windows and I want to use my iPhone with Mac iTunes too.
I think a possible solution is to use the same library in the two OS, and I don't know if it is possible.
In Mac OS I don't have write access to BootCamp's NTFS file-system partition, so I use a Windows software to full acces to Mac OS partition. For me the solution would be to place windows iTunes library files in MacOS partition and use these files with MacOS iTunes as library too, but I don't know if it's possible.
If anyone have any other idea how to solve this problem...
Thanks,
Raul

All your contacts, photos, music etc. should be on your computer, so you just sync the second iPhone to the same computer as the first iPhone.

How I average data with 78,74,73 and 55 points respectively and end up with an array of 78 points for the average?

Hi
As the questions states, how do I average data with 78,74,73 and 55 points respectively and obtain an array of 78 points?
When I use the plus vi, Labview somehow produces an array of 55 points when I do the average (see attached vi).
I have been unlucky in trying to get good results.
Can anyone help?
Thank you.
Attachments:
average4.vi ‏40 KB

The add function is polymorphic. It accepts arrays as well as numerics, but you need to understand one thing about array operations in LV. Operations performed on arrays of different sizes will always (I think) work based on the smallest array. For example, if you auto index 2 arrays of different sizes into a for loop, the number of times the loop will run will be the size of the small array. The same is true here - when you wire 2 arrays of different sizes to the add function, only the first N elements of the larger array get processed. The rest are dumped. That's why you get 55 elements.
Attached is a modification of your VI which shows 2 things:
The bottom part is your algorithm, only cleaned up. Note how much easier it would be to read now. You should always write clean code. Also, note that I have changed the representation on some of the data from DBL to I32. This is because this is the representation the array function work with and your code had the DBLs coerced for no reason.
The top part is a different algorithm which should do what you want. Note that like Mike said, the arrays with smaller sizes will have 0s appended at the end, so if you want to avoid that, you will have to modify the last part, where the averaging is done and only divide those columns which are long enough.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
Try to take over the world!
Attachments:
average4MOD.vi ‏63 KB

How MES is effected with BTO,BTS,CTO and ETO manufacturing scenarios.

Similar Messages

Maybe you are looking for