How monitor the use of dial-peer (Connect Time)

How monitor multiple dial-peer (Connect Time) ??
When this reaches the defined time accumulated connected (example: Connect Time = 10000) shutdown the dial-peer.
UC520#show dial-peer voice 2 | beg Connect
Connect Time = 1430, Charged Units = 0,
Successful Calls = 2, Failed Calls = 0, Incomplete Calls = 0
Accepted Calls = 0, Refused Calls = 0,
Last Disconnect Cause is "10 ",
Last Disconnect Text is "normal call clearing (16)",
Last Setup Time = 1445373634.
Last Disconnect Time = 1445375144.
enable dial-peer in a day of the month date concurrently (example: Every day 15 of each month)
commands used:
clear statistics dial-peer voice 1
show dial-peer voice 1 | beg Connect Time
Thanks
Felix Guzman

This should be doable with an EEM policy. If I understand you correctly you want to watch for connect time to reach 10000 when it does you want to shutdown the dial peer.
And then enable every 1th day of each month.
The first part you would do with a watchdog EEM policy which periodically runs and checks the output of the show dial-peer voice 2 command.
The second part you probably would use a second EEM script to trigger on a cron timer set for the 15th day of the month, and have it run the commands you mentioned.
Thanks.

Similar Messages

HT5437 How can I use apple TV to connect my computer to the tv screen as an external monitor?

How can I use apple TV to connect my computer to the tv screen as an external monitor?

Morning jotref,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
About AirPlay Mirroring in OS X Mountain Lion
http://support.apple.com/kb/ht5404
Best of luck,
Mario

How do I establish a dial-up connection in Labview to FTP files (I have the internet connectivity toolkit)?

I'm writing an application that will automatically update files on a server, using the internet toolkit's FTP vi's. It works fine with a LAN, but I'm not sure how to establish a dial-up connection via a telephone modem.
Ultimately, I'd like the program to dial-up, connect, ftp files, then hang up. So far I have used AT commands through the serial compatiblity vi's to dial up and logon to a local internet provider. The provider then spat out an IP number and an MTU number (1524), followed by periodic spurts of garbabe.
Any help in getting to the next level would be greatly appreciated.
Thank you,
Tom

Tom,
You CANNOT dial-up to the ISP using the Internet Developers Toolkit. The toolkit assumes you already have a valid TCP/IP connection. However, many web browsers such as Netscape and Internet Explorer have auto-dialing options that will start dial-up networking automatically when you launch your browser. The only trouble is that the auto-dial wizards can require the user to push buttons, but there is a Shareware program called DUNCE which will take care of the button pushes for you in the auto-dial wizards so the user does not have to intervene in the dial-up process. You can recommend to the customer that the lauch their browser from LV and then have the browser configured for auto-dial and that should take care of the problem. I did not actually try this o
ut myself, but in theory it should work.
Zvezdana S.
National Instruments

HT2589 We have purchase 5 apple minis and would like them all on one account. That way we can monitor the use of these units. they will be used strickly for a business application. can I use one account in itunes or must i have multiple.

We have purchased 5 apple minis and would like them all on one account, that way we can monitor the use of these units. They will be used strickly for a business application. Can I use one account in itunes or must i have multiple.

Not going to happen the way you want it to.
When you add a gift card balance to the Apple ID, it's available for the Apple ID.
Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

How is the using iphone 5 in iran

hy i have some question
when the person in travaling to country iran how is the use iphone 5 in the country?
what is the nano sim card?maybe use this country?
are the working this country ?
is the unlocked factory iphone 5 for iran?

It is illegal to export the iPhone to Iran. It can not be legally sold into that country. There are no supported cariers there. Apple has no presence there. All iPhones in Iran are gray market phones.
This is not a choice on Apple's part. It is the law.

Still after update to 5.0.1 same problem with the 4S with dial out, connecting to internet, echo in reception. It is the second phone.

Still after update to 5.0.1 same problem with the 4S with dial out, connecting to internet, echo in reception. It is the second phone.

Try deleting the account(s) you're having problems with, resetting your phone (hold on/off and home buttons simultaneously 10-15 seconds until Apple logo appears, release buttons and wait for it to restart), then add back your mail accounts. I've read that this has worked for some.

How can i use an existing vpn connection without using the option "Send all traffic over vpn connection"?

I have been trying to get my computer (os x.7) to astablish a remote desktop connection to my work computer via a vpn tunnel. In fact I have just discovered that it works fine if i select to "send all traffic over vpn connection" from the options in the advanced setup of the vpn.
If the option is selected microsofts "Remote desktop connection for mac" works just fine. However without selecting the option it is not taking advantage of the tunnel but tries to connect as if the tunnel would not exist.
Now the question is how do I get program to use the vpn tunnel without checking the above option?
Thanks for any hints and pointers.

Then can her computer be authorized to both accounts?
Absolutely. You can authorize any given computer to up to five iTunes Store accounts.
If purchases are made on her account, to a computer authorized to my account, can I put those songs on my iPod?
If you connect your iPod to her computer, yes. Tracks download only to the computer from which they're purchased, regardless of which iTunes Store account is used for the purchase. Or you could copy the tracks from her computer to yours and then authorize your computer to her iTunes Store account. But that's sort of defeating the original purpose, it would seem to me.
is it better to buy music through Amazon downloads and/or actually purchasing CDs to avoid the security features iTunes puts on its music?
That's certainly an option. If it's an entire album I want, I buy CDs. That way I can import them at the quality I want and to whichever of my systems I want. Amazon or one of the other download stores that offer tracks as MP3 are also an option, though for me download stores are best when you just want a couple of tracks off a given CD.

How to update Firefox using a dial-up connection

My dial-up connection does not allow me to download the update to Firefox -- connection is dropped after many minutes. How can I get an update?

Maybe you can download and save the full Firefox installer to an USB stick with a friend or other location that has a faster connection.
You can find the full version of the current Firefox 28.0 release in all languages and for all Operating Systems here:
*http://www.mozilla.org/en-US/firefox/all.html
You can also try an external download manager to be able to resume the download if that isn't possible with Firefox.<br />
An external Download Manager offers better support for resuming interrupted downloads than the built-in Firefox Downloads Manager.
* http://plugindoc.mozdev.org/windows4.html

How to configure a virtual dial-peer destination pattern?

There is a virtual dial peer, 22501, that is configured with a destination pattern. When that call comes in the (H323) gateway from the PRI, it, of, course fails. There is a voip dial peer, 301, of 8345.... which it's supposed to hit. But the virtual dial peer is a specific match. How do I take that destination pattern off of dial peer 22501? I can't get in the dial peer like the other, normal, dial peers? I get "invalid command" when trying. Need help getting it out.
301 voip up up 8345.... 0 syst ipv4:10.208.11.251
89900- voip up up 0 syst 000
98765- voip up up 0 syst 4
91919- voip up up 0 syst 191
92929- voip up up 0 syst 292
22501 pots up up 83452342$ 0 50/0/1
22502 pots up down 1 50/0/2
22503 pots up down 0 50/0/3

Hi Anthony,
The voice-ports start from 50/0/x created when we configure an ephone-dn on the CME.
Since, i do not see any CME configuration on your gateway, that means you must be using this as SRST.
When IP phones registered on the CUCM loose connectivity, and they register to SRST, these voice ports and dial-peer are dynamically created. And the extension on the IP phone is automatically configured at destination pattern.
Please check if this IP phone(with extension 83452342) is still registered in the SRST mode.
If not, then probably the dynamic configuration has not been washed out completely.
There is no way you can enter in these dial-peer configuration and remove it.
At the moment, you need to reload the gateway to remove this configuration.
Hope this helps.
~Amit

How to automatically initiate a dial-up connection from Lookout and send an attachment

Folks:
I am trying to send (as an attachment) a spreadsheet file via email.
How can I programatically (from Lookout) initiate the default dial-up,
send the email (and attachment) and after success (btw, how do I
measure this?), ... then close the dial-up connection.
I am using 6.0.1 running on XP Pro (SP2).
Thanks!
Kevin

Hi Kevin,
Here are some documents that should get you started with setting up a dial-up modem in Lookout and sending an email:
Dial-up modem settings for Lookout:
http://zone.ni.com/devzone/conceptd.nsf/webmain/108f6fa501dc4a2e86256a6f00519bef?OpenDocument&node=D...
Commands for communicating with a modem:
http://digital.ni.com/public.nsf/websearch/8EC833DA692DFBA286256BA100020214?OpenDocument
If you need to dial a number you will use the pager object (take a look at the links from this page as well):
http://digital.ni.com/public.nsf/websearch/9123C2685B3B977F86256C02005E6CA2?OpenDocument
Example of using Lookout Mailer object:
http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_answer=&p_guid=B45EACE3E98156A4E034080...
Lookout Mailer object troubleshooting:
http://digital.ni.com/public.nsf/websearch/843FDCF3138EEEAE862569EA006DA113?OpenDocument
Check out the Lookout help on the mailer object. There is an attachment data member that you will use to point it to the file you want to attach to the email.
Let me know if this helps at all.
Regards,
Bryan Snarr
Field Engineer
Northern California
National Instruments

How do I use my airport express or time capsule to increase the signal strength of my comcast router

How do I use my airport express and/ or time capsule to increase the range of my newly installed comcast modem/router.

Neophite50 wrote:
Thanks.
A question. Do I plug the TC into the Comcast modeum Router or the iMac?
Both is good.. but at least one of your routers.. TC or express must be plugged into the router.. the imac can get internet connection by wireless.

How can I use File DSN to connect to database?

Hi,
I am using ODBC-jdbc driver to connect to the database. It seems that the DSN name is required. How can I use a file DSN instead of system DSN to connect to database? Please help?

oracle provided jdbc drivers (thin and oci) do not use odbc.
why would you want to slow things down by sending "round trip" data transfers thru a "jdbc to odbc" and thru "odbc to jdbc" conversion routines.
It isn't necessary with the oracle provided drivers !!

The useful case for Ocasionally Connected

Hello experts.
Now I try to gather the information about Netweaver Mobile for customer.
And I want to hear what is the advantage of occasionally connected architecture.
I've already known that mobile device could have the data inside itself and customer can work with off-line in case of occasionally connected, but most cases of real customer using mobile devices seem to be in case of always connected without any data on mobile.
Is my understanding incorrect?
Could anyone tell me the concrete use case with occasionally connected architecture, I think mostly for Laptops and PDAs?

Hi Nobuko,
The following are the customer references for SAP Netweaver Mobile
1. Dr Reddy Laboratories
http://download.sap.com/platform/netweaver/customers/download.epd?context=2365677C38351182E1308DF53C378FDA0178748B490B71E4648677BF7480E078998BCDE2DF9B957C508F585E6DD6884DADDF9CF54D20D51B
2. Baylor College of Medicine
http://download.sap.com/download.epd?context=1EF6CC29114608DA85ECB0E110511FEF234412BDA7AF19E2D2DAEC82F757F4DB9EF695FFA04A4E6F839EAB48026755119EBDB2B1B0B11AF6
3. Coca-Cola Hellenic
http://download.sap.com/usa/platform/netweaver/customers/download.epd?context=4269FA37611FD0D33394CE308E11144409C9E621421D2E5AC4845186785FCEE3361515431493CDF850C06F2F887EF0269E1DB923C0410BD1
I hope this helps.
Best Regards,
Amit

After downloading iOS 8.1.3, lost the use of messaging and face time, shortly after my e-mail. Any suggestions? Val

After downloading iOS 8.1.3, I lost the use of messaging, face time and shortly there after my e-mail. I changed and reset everything I could on my I-Pad... same result. It can't be my router or my provider, for my I-Pod touch works fine. Any suggestions? Thanks, Val

Hi berczy,
Thanks for the question. I understand that you are experiencing multiple issues with your iPad after updating. It sounds like you are on the right track, as all three of these tasks require an internet connection. To help isolate the issue further, are you able to open webpages in Safari? If not, we’ll need to troubleshoot the iPad’s network connection:
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
https://support.apple.com/en-us/HT204051
- Matt M.

How i can use "wake on lan" with time capsule

1. Preference -> Energy Saver -> Options -> WOL check
2. in airport utility
internet>nat>defalt host check
3.and I'd send magic packet.
but it doesn't work
How i can wake on my mac through time capsule.

Can you be more specific ?
Where do you send the WOL from? Another computer? From the same network? How are each machines connected ?

How monitor the use of dial-peer (Connect Time)

Similar Messages

Maybe you are looking for