How much and what kind of memory can I install to upgrade my G72-b57cl notebook?

I have installed what I thought was the recommended memory for my G72-b57cl notebook, but I cannot get windows to boot or recover after installing it. The BIOS recognizes the memory and a memory check also recognizes it, but windows 7 64-bit will not operate. Is it the memory or windows?

Hi:
Below is the link to the service manual for your notebook.
http://h10032.www1.hp.com/ctg/Manual/c02623152.pdf
Memory upgrade info can be found in chapter 1 on page 2.
Max is 2 x 4 GB (8 GB) of PC3-1333 memory.
You have to pay particular attention to the fact that HP notebooks need PC3-10600 memory.
There are some memory modules out there which are PC3-10660 or PC3-10666.
The above 2 variations will normally give the user problems.

Similar Messages

  • What kind of memory do i need to upgrade my mac pro

    i have a mac pro and it has a 2GB memory i want to upgrade it to a 4GB memory but i dont know what kind of memory i need. can someone please help

    http://bestbuy.upgradebase.com/
    Go there and select your model and it should tell you what speed it takes.
    If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
    I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
    Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

  • I am unable to find out how much and what type RAM is supported by HP ( DV6610eo ) laptop

    Hi i want to buy more RAM to my laptop but i am unsure if the motherboard will support 2GB or 4GB and what type, i think it'sDDR2 PC5300 SO DIMM 200pin but again i am not sure, bellow are the details from the service tag, i would be grateful if some one could help me with this before i buy the memory upgrade.
    DV6610eo
    S/N CNF7444MFY
    P/N KB342EA#UUW
    Best regards
    Juha

    Maximum memory is 4GB.
    Be sure and purchase only guaranteed compatible RAM. 
    Here is a link to a search that I did.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • What kind of memory can I upgrade to?

    I want to upgrade to 2gb of memory what kind the NB305-410 use?

    mini notebook NB305-N410BL (the blue one)
    To improve the likelihood of being in spec, get your memory from Toshiba or use Kingston's best.
    To add it, see the section Adding memory (optional), starting on p. 42 of the User's Guide.
       NB300 Series User’s Guide
    -Jerry

  • Please help me figure out how much and type of RAM I can add to my P'Book!

    I have a 12" PowerBook with DVI input. The computer tells me it has the following:
    memory; Dimmo/built-in 256MB(size) Built-in(Type) Built-in(Speed)
    Dimm1/ j31 512MB DDR SDRAM PC2100U-25330
    PCI/AGM GeForce FX Go5200 32MB (VRAM - in total)
    About this Mac says Processor 1GHz PowerPC G4
    Memory 768 MB DDR SDRAM
    Please can someone tell me exactly what I can put in this machine to maximise its RAM? Help much appreciated!

    Welcome to the Apple discussions.
    Have you checked the specs at http://support.apple.com/specs/powerbook/PowerBookG4_12-inchDVI.html . It says you can have a total of 1.25GB ... that means you can replace the 512MB card with a 1GB card to maximize the memory.
    If you're going to upgrade your memory, recommend Crucial, Kingston (not their value ram), or Samsung. You can also scan the discussions for other memory that has worked. Our Powerbooks are picky about what memory works ... a case where cheapest may not be the best choice. Crucial guarantees it's memory will work when chosen from it's memory selector on it's web site.

  • What kind of memory do I need for an HP G72 notebook?

    I want to upgrade the memory in my laptop to to max size and speed.  It is a G72 with a dual-core Pentium T4500 2.3ghz, Windows 7 64-bit.  Thanks

    Hi,
    G72 is a series of many models (of laptops) but basically they have same base. Please check this very reliable source:
       http://www.crucial.com/upgrade/HP+-+Compaq-memory/HP+G7xx+Series/HP+G72-257CL-upgrades.html
    You can buy RAM from them or use the info to buy elsewhere.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What kind of classes can be instantiated and how it can be done?

    Dear All,
    What kind of classes can be instantiated and how it can be done?
    Can you please explain me in brief and provide sample code for it?
    Thanks,
    Anup Garg

    Hi Anup,
    You can create instances of a Final class...its just that you cannot override its behaviour...
    btw...If you are coding the whole class, you can define a class as Final as below
    CLASS CLASS_NAME DEFINITION FINAL
    ENDCLASS
    Else, if you use the class builder (SE24), you just need to check the Final checkbox available in the Properties section of the class.
    ~ Piyush Patil

  • How much memory can I install in my mac book pro?

    Mac book pro 2.4 GHz late 2011 i7....How much memory can I install? Currently have 4Gb but want to run Win 7 on VMware and want to make sure my user has enough

    The position of Apple is that the Late 2011 can take 8 GB, however, OWC, http://www.macsales.com and Crucial, http://www.crucial.com both guarantee their 16 GB ram packages to work.  Both are sellers of high quality ram that is guaranteed to work in Macs.

  • I have the MacBook Pro (retina, 13 inch, Mid 2014) Memoria 8GB 1600 MHz DDR3 and I want to increase the memory. What kind of memory do I have to buy?

    I have the MacBook Pro (retina, 13 inch, Mid 2014) Memoria 8GB 1600 MHz DDR3 and I want to increase the memory. What kind of memory do I have to buy?

    The RAM in the retina model can not be upgraded.

  • I have one HDMI port on my television that is currently used for my hard drive/free view box.  What kind of adaptor can I buy so I can have the hard drive and my apple tv device plugged into the same HDMI PORT?

    I have one HDMI port on my television that is currently used for my hard drive/free view box.  What kind of adaptor can I buy so I can have the hard drive and my apple tv device plugged into the same HDMI PORT? Is it a switch or a splitter?  And where is it best to buy one?  Thanks!

    Welcome to the Apple Community.
    You need an HDMI switch.

  • Distribution mobileprovision and Developer mobileprovision what kind of files can be uploaded

    Distribution mobileprovision and Developer mobileprovision what kind of files can be uploaded
    Hi
    Im trying to opload Distribution mobileprovision and Developer mobileprovision files in the DPS Viewer Builder, but cant see what i need
    I have tre .p12 setificats but none of them are able to be selected when i browse.
    Must be doing something wrong here, just wonder what ... can you hel?
    Helen

    Go through the attached Publishing Companion Guide. You need to create Mobile Provisioning files using Apple iOS provisioning Portal. The guide gives you step by step information on creating these.

  • Hay guy, does any one here know what kind of games can i download/buy for my new macbook pro? and what should i look after before i buy any game?

    Hay guy, does any one here know what kind of games can i download/buy for my new macbook pro? and what should i look after before i buy any game?

    http://www.apple.com/downloads/macosx/games/
     

  • My iMac was infected with a virus or malware the other night. I was told that I didn't have any firewall protection. How do I fix that? And what kind of software should I use to protect my computer from further attacks?

    I am running OS X Version 10.9.5 on n iMac I brought in 2011. Had a virus or malware attack the other night and a window opened with a # to call for help. Didn't know if I should trust the # but ended up calling it anyway and paid to have them 'fix' things. Was told I didn't have firewall protection. Am not sure if I do now. [It still says to allow all incoming connections]. So what do I do now? And what kind of antivirus program is recommended?
    Firewall

    Read "Ransomware" web pages.
    Assuming you let the scam outfit remotely control your Mac, the information on it can no longer be considered secure. Neither can the Mac itself. You should immediately shut it down and take actions to prevent or recover from identity theft, which is quite likely to have occurred. This means contacting the financial institutions and other companies that may permit access to your accounts using login names and passwords, canceling and replacing credit cards, and similar actions that only you can know.
    Determine if you can contest the charge made to your credit card for this criminal transgression.
    And what kind of antivirus program is recommended?
    None. The Mac is highly secure against malware or virus intrusion, but nothing can prevent you from willfully installing dubious software or granting remote access to criminals. No "anti-virus" software in the world will protect you from that. The OS X application firewall is not intended to prevent this sort of occurrence.

  • Can I upgrade to CS6 for how much and with fresh independent files.

    I ordered Adobe Creative Suite 4 Web Premium a long time ago (I have the order number). I was wondering if I can get a download for CS6 and have a license to use on 2 computers.
    I need to know how I can update to CS6 for how much and if I can get fresh files and not rely on old ones.

    http://www.adobe.com/products/creativesuite/design-web-premium/buying-guide-upgrades.html
    Mylenium

  • IMac G4 PPC, what kind of memory do I need?

    I've looked everywhere, but I haven't found anything that screams "This is clearly the exact thing you need, doofus".
    I own an iMac G4 PPC.
    Here are the specs:
      Machine Name:          iMac
      Machine Model:          PowerMac6,1
      CPU Type:          PowerPC G4  (3.3)
      Number Of CPUs:          1
      CPU Speed:          1 GHz
      L2 Cache (per CPU):          256 KB
      Memory:          256 MB
      Bus Speed:          133 MHz
      Boot ROM Version:          4.5.9f1
      Serial Number:          W8******NHX
    And if this is important, here:
      System Version:          Mac OS X 10.4.11 (8S165)
      Kernel Version:          Darwin 8.11.0
    And this: (Memory)
    DIMM1/J20:
      Size:          256 MB
      Type:          DDR SDRAM
      Speed:          PC2100U-25330
      Status:          OK
    (The only other slot is "DIMM0/J22", and all it says is "Empty".  I'm just assuming that's the one I'm trying to get memory for.)
    For the past since forever, I've been trying to find some memory I can add to it, because it's showing its age.  I love this computer, and I want to get as much out of it as I can.
    The thing is, I can't seem to find the specific type of memory for it anywhere.  And if I have, I sure don't know if it's the right kind.
    I need the biggest possible memory I can put in the slot on the bottom, the one that apparently goes in the "DIMM0/J22" slot, which is the only one out of two that says "empty".
    I've tried a few sites like Crucial, which have a system scanner to help pinpoint your compatibility, but my system doesn't support that application and refuses to run it.
    What kind of memory goes into the user-accessible slot on my machine?
    Can someone please help me out?  I'm sick and tired of that beach ball.
    <Edited By Host>

    Click here for some; you need a 200-pin SO-DIMM.
    (75711)

Maybe you are looking for

  • How to choose default tab

    I created spry tappedPannel in dreamweaver cs3 and the first tab is the default. How to make the default my 3rd tab?? Thanks in advance

  • Script error - Output is continuous or contain too many pages and get

    Hi , I have added one more page (name affidvt ) to the existing script. Previously Cover page was calling next page as cover first    page was calling next page as next next   page as again next. But after new addition of the page ( called as affidvt

  • My compile shell script can't work when using flex4 sdk beta2

    I worked with flex4 sdk beta 1, and the compile script worked well. for example: mxmlc -debug=true -output=../main.swf -source-path ./src /usr/local/software/flash/open_source -- ./src/main.as But, when i chang into beta2, it shows some errors which

  • 11g Installer for windows

    Any idea when 11g Installer binaries for windows will be available , i want to install and play with it on my labtop....

  • Help on deleting records

    hi! i just want to ask how i will delete a record from a table that doesnt have any records on the second table? (huh? confused?) here it is... i have 1st table (customer records) and 2nd table (orders) i want to delete all customers on the 1st table