How much contacts i can store in iphone 5 64GB?

How much contacts i can store in iphone 5 64GB?

Far more than you will ever need to store.

Similar Messages

  • How much cold temperature can an iphone 5 endure?

    I am just curious how much cold temperature can an iphone 5 endure? here in my town, 4'c is normal in daytime and 0'c at night and dampness present in my room all the time which cause my cell phone display black and unresponsive.

    Cold will make a lithium ion battery drain more quickly than normal and can cause the phone to shut down. However, I doubt it's zero degrees in your room at night. If it is, you have bigger issues to worry about than your phone. Unless your phone is a tropical rainforest or has a constantly running hot shower or is a sauna, it seems unlikely that it could be damp enough to cause an issue. You may have a larger hardware issue. Consider getting the phone checked out by Apple.
    I'm not sure I'd want to live in a town that only got 4 degrees warmer in the day than at night in the winter. Brrrrr.......

  • How did I know how much money did Apple store charged me?

    How do I know that how much money that Apple store had charged me?
    is there any apple account that I can go look?

    What if just download some son to my I-phone 4s, would that be show up ,too?
    because there is no record for my purchased?? but the Apple did charged my money.

  • How much is the cost for replacing iphone 4 display?

    how much is the cost for replacing iphone 4 display?

    Apple will replace it, and the replacement comes with a 90-day warranty.
    There are some legitimate, high quality repair centers that often can fix phones for less than replacement cost and offer at least 90 warranty...
    Or maybe the OP knows that the broken display is not covered under warranty, which is why he was asking for the cost, but he still may have a warranty that just wouldn't cover him in this case.
    The warranty is all or none.  If the phone were damaged so as to void warranty coverage on the display, there is no remaining warranty on the rest of the device.

  • How much memory/RAM can I put into my HP Compaq 8710p when running 64-bit Windows 7?

    How much memory/RAM can I put into my HP Compaq 8710p when running 64-bit Windows 7?
    This question was solved.
    View Solution.

    The maximum supported is 8 GB.
    The Maintenence and Service guide for the Compaq 8710p
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • TS1347 Need to know how transfer contacts and messages from an Iphone 3Gs to an iPhone 5s

    how transfer contacts and messages from an Iphone 3Gs to an iPhone 5s

    http://support.apple.com/kb/HT1766

  • Is there a limit to how much text I can put in the scrolling sidebar widget in iBooks author?

    Is there a limit to how much text I can put in the scrolling sidebar widget in iBooks author? I have recently tried putting about 3,500 words into a scrolling sidebar widget, and I can't seem to get all of the text into the widget. Thoughts? ideas?

    There are button limits in the DVD spec (not just Encore).
    DVD, 4:3 menu = 36 buttons
    DVD, 16:9 menu = 18 buttons

  • How much is a battery for an iPhone five

    How much is a battery for an iPhone five

    Apple does not sell batteries.
    They will replace it for a fee.
    Type "iphone battery replacement program" or similar into the google search bar.

  • How many days we can store the data  in psa & ods ?

    hi guru's
    how many days we can store the data  in psa & ods ?
    Thanks & Regards.
    Prabhakarreddy

    Hi Prabhakarreddy,
    As many days as you like:
    In the PSA you can keep data as long as you like but you will need more and more disk-space. So its advisable to clean up from time to time.
    Example:
    PSA's from full loads Clean up in a weeks time,
    PSA's from Deltas: Clean up after you are sure data is correct. (e.g. a month or 90 days)
    Remember that you cannot do a reconstruction from dataloads of which you have deleted the PSA. If some thing is wrong you will have to do an Init again!
    In ODS's you must keep data in order to keep your delta loads to cubes in order. Removing data will force you to do a new initial load.
    Sometime companies delete old data form ODS's that is older than a certain period (e.g. more than 3 years old) by running a selective deletion. You will have to do an init again. But loads and activation may run faster and of course you gain on disk space.
    Udo

  • How many years we can store the data in ODS as well as psa data ?

    Hi guru's
    how many years we can store the data in ODS? can u give particular years ?
    how many days we can store the data in psa ? could u tell me step by step procedure ?
    Thanks
    Reddy prabha

    Hi Prabhakarreddy,
    As many days as you like:
    In the PSA you can keep data as long as you like but you will need more and more disk-space. So its advisable to clean up from time to time.
    Example:
    PSA's from full loads Clean up in a weeks time,
    PSA's from Deltas: Clean up after you are sure data is correct. (e.g. a month or 90 days)
    Remember that you cannot do a reconstruction from dataloads of which you have deleted the PSA. If some thing is wrong you will have to do an Init again!
    In ODS's you must keep data in order to keep your delta loads to cubes in order. Removing data will force you to do a new initial load.
    Sometime companies delete old data form ODS's that is older than a certain period (e.g. more than 3 years old) by running a selective deletion. You will have to do an init again. But loads and activation may run faster and of course you gain on disk space.
    Udo

  • How much storage units can be added in the single bin.

    Hi all,
    Can anybody tell me how much storage units can be added in the single bin.
    Dev

    Hi Dev,
    AS Prashant & Abhijit mentioned above the maximum storage units in a single bin is based on various factors such the putaway strategy & capacity check you have set for your storage type as well as palletization data.
    Now in case of Bulk Storage which you have mentioned above, please go through the below F1 help for the block structure.
    In bulk storage, you need to define for each block (or row) how many
    storage units fit into the block.  For this purpose, you must define
    both the number of columns as well as the maximum stack height.  *The*
    product of these factors usually gives the maximum number of storage
    +units and is determined automatically by the system.  However, it is+
    possible to change the maximum number of storage units to a lower number
    if the storage bin or the material features require this.                                                                               
    Hope it helps.
    Thanks & Regards,

  • How much memory space will left in iphone 4 if i update it to ios 7?

    How much memory space will left in iphone 4 if i update it to ios 7?

    A little less than is left now.

  • How much big file can be executed or compiled by JVM/JRE?

    How much big file can be executed or compiled by JVM/JRE?

    The language, compiler, or JVM specs will probably say.
    However, if you need to ask this question, then your classes are far too big.

  • HT4528 How much would a cracked screen for iphone 4S cost, if my phone is still under warranty?

    How much would a cracked screen for iphone 4S cost, if my phone is still under warranty?

    Razmee209 is correct, out of warranty repair/replacement cost for and iPhone 4s is $199, and the reason you would have to pay for that Kats524 is because accidental damage is not covered under your limited hardware warranty. Hope this helps, best of luck to you.

  • Want to upgrade RAC 10.2.0.2 database (2 instances) to 10.2.0.5. DB size is 4 TB. Contains mostly .pdf files, reports. I do not have test/upgrade environment. How much time I can expect it will take?

    Want to upgrade RAC 10.2.0.2 database (2 instances) to 10.2.0.5. DB size is 4 TB. Contains mostly .pdf files, reports. I do not have test/upgrade environment. How much time I can expect it will take?
    How much the upgrade process depends of database size, in this case?
    I have fast boxes  IBM AIX 5.3 , 64 b.

    Appreciate your comments ...
    Yes, sound stupid, regarding test environment, but in reality, is not that much:
    -I do have "preprod" environment, (2 instances RAC) same releases of OS, OCW,RAC ... but DB size is 40 GB!!!  It has all the objects as production, but (again but) it does not have physical standby, as production has. This is not that unusual, knowing that production DB grows very fast, and very large, and business do not want to keep preprod, dev, test databases same HUGE size as production is. Savings ...
    -My DB upgrade depends if application  running on top of it is certified for higher RDBMS release ... looks like they have some problems.
    -Very encouraging sounds comment that DB upgrade does not depend that much of the DB size ...
    - i do not recall from where this info came, but I have heard that R 11.* treats PDF files in different way that R10 did it ... and because of that, process of upgrading big databases which have many items of that type (pdf) can take very long. Any idea about this?
    -Brian, thx ... I'm trying hard to provide DB simmilar size in UPG environment and face all possible pitfalls before I go in production...thx for youe advice. I'm relly interested in how upgrade to 11.* from 10.* traets my pdf-s ... All my TBs comming from pdfs. Everi advice will be wellcome ...

Maybe you are looking for