How much hard drive RPM can this iMac handle?

Hello!
In my office there's an *iMac Indigo G3 @ 400Mhz* (serial number RN03820ZJV8) and I need to replace its hard drive with a new one with more capacity.
Am being offered hard drives with different RPMs (5,400, 7,600, etc.) but I need to know how much can this IMac model handle, I don't want to over-heat it.
However, I couldn't find that specific data on apple's web site...
So as an alternative way of knowing this I thought that it would be a good idea to know the RPM of the current hard drive as it has worked well for several years:
"*Fujitsu MPG3204AH E:*", capacity of 19.09GB (serial number: VL00T1A09W09).
But I haven't been able to find that info either!
Anyone out there who can answer:
1.- What's the maximum amount of RPM this specific iMac model can handle without overheating?
And/or:
2.- What's the RPM for that specific hard drive?
Best!
Danny

Several years ago, there were concerns about the faster 7,200 RPM drives causing heat issues in the convection-cooled, slot-loading iMacs. In actuality, the hard drives manufactured today run more smoothly, cooler, and quieter than the first generation of 7,200 RPM drives. You won't have any problems installing a 7,200 RPM drive. The onboard IDE controller can only recognize a maximum formatted drive capacity of 128 GBs, so a 120 GB drive is ideal, but hard to find now. A 160 GB drive is usually the smallest drive stocked by many retailers today, but it would only be recognized as 128 GBs after formatting. As for the Fujitsu MPG3204AH-E drive, the "AH" in the model number indicates a 7,200 RPM drive, whereas earlier drives with "AT" in the model number were 5,400 RPM drives.

Similar Messages

  • When i look at how much hard drive space i have available, my mac says i have 250 gigs used up in backup.  I can not find this backup file to delete it and free up the space

    When i look at how much hard drive space i have available, my mac says i have 250 gigs used up in backup.  I can not find this backup file to delete it and free up the space

    OmniDiskSweeper is a free utility that checks HD space.
    FreeSpace cost $1 or is a free utility that checks HD space.
    SpaceControl is a free utility that checks HD space.

  • How can i tell how much hard drive space my website is taking up on my computer?

    I have a website that i build through iweb and publish via mobile me.  i have about 200 podcasts on the site, and I am trying to figure out how much hard drive space this is taking up on my computer.  these files are not in itunes, and i'm not concerned about the space they are taking up in my cloud, i just want to know how much space on my computer they are taking up because i'm trying to decide if i should move my iweb site to a different computer to alleviate some space issues.  any help would be much appreciated.

    Check the size of the Domain.site2 file that is in your Users/Home/Library/Application Support/iWeb folder.  it contains all of the files used to create and publish your site.  I'm not sure if it copies the podcasts into it or not. You can open the domain package and do a search for them. Just don't move, rename or delete any files inside that package or your site is toast.
    OT

  • How can one find out how much hard drive space the apps and media are using?

    how can one find out how much hard drive space the apps and media are using?

    See Here  >  Where did my Disk Space go?
    And Here  >  The Storage Display

  • How can you tell how much hard drive disk memory is available?

    How do you check to see how much hard drive memory you have left?

    Hi, easiest way is to highlight that Icon on the Desktop & do a Get Info on it... CMD+i

  • How to see how much hard drive space is free in my MacBook Pro

    I have a lot of music and am starting to use lossless files.  How can I check to see how much hard drive space I have free on my MacBook Pro?

    Select:
    •  (in the Menu Bar)
    • About This Mac
    A window appears
    Select:
    • More Info...
    Another window appears
    Select:
    • Storage

  • How do I tell how much hard drive space I have left?

    I have an iMac v. 10.5.8 and want to know how to check how much hard drive space I have left. Thank you!

    Select the drive and choose Get Info from the File menu, or open any folder on it and choose Show Status Bar from the Finder's View menu if it isn't already displayed.
    (72312)

  • How do i see how much hard drive space i have used

    how do i see how much hard drive space i have used

    Select your hard drive's disk icon on the Desktop. Press COMMAND-I to open the Get Info window. The info is displayed in the upper pain of the Get Info window.

  • How to see how much Hard Drive space I have

    Is there any way to see how much hard drive space I have left on my laptop in Lion?

    Also in a finder window if you holding cmd press / the grey bar that i think you looking for appear at the botton.

  • I don't see my hard drive in finder , i wanna know how much hard drive space i have.

    i don't see my hard drive in finder , i wanna know how much hard drive space i have.

    Check the settings in the General and Sidebar tabs of the Finder's preferences.
    (67071)

  • How much hard drive space left

    How do I find out how much hard drive space I'm using? My system profiler doesn't tell me didley.

    Hello! Single click on your hard drive icon to select it and then under the file menu in the finder choose "get info" and then information will be displayed. Or if you're using a two button mouse do a right click on the HD icon and choose "get info". Tom

  • How much hard drive can i put in?

    I just recently purchased a Mac Pro from early 2006. It has the 2 X 2.0GHz Dual Core (4 core) Xenon 5130 processors  with 2 GB of Ram. It came with 250 GB of hard drive space which I am looking to expand. However, I would like to know what the maximum capacity the processors and/or Ram can handle so that way I don't destroy the computer. So, does anyone know?

    RAM. You do want more no matter what. Amazon: 2x2GB $36 and I would get at least two for 8GB (and pull the 2GB you have)
    Disks: $110 will buy you:
    1TB WD Black / 128GB SSD / WD 10K VelociRaptor 250GB all good solid and improvement
    And do not put all your files on the one drive. Use the four disk bays: system, data, backup at least.
    $300 with work and tutorials on MacRumors and Youtube a pair of 5355 2.66's 8-core
    Same system I have and still going better than before.
    And ATI 5770 or something but you will not be able to boot from any DVD or pre-10.6.5 system.

  • Invalid key length on hard drive. Can this be fixed?

    Hello,
    I have a question about an error I am receiving with a hard drive I have been using for a few months on an imac G3 (the slot loading version). I bought this used 80 GIG hard drive on ebay for a friend of mine and I helped him transfer all his data from his older 9 GIG drive to this newer 80 GIG drive that I bought for him on ebay. I simply cloned the 9 GIG drive onto the new drive using Carbon Copy Cloner. There is not a lot of data on the drive - only about 3 GIGs of data.
    The drive is the only drive in the computer (an imac G3) and therefore it is the startup drive. The operating system on the drive is OS9. All was working fine for a few months until just last week. Now I am receiving this following error:
    error message:
    The disk "Macintosh HD" appears to be damaged. Use a disk repair utility to repair the disk.
    And so I used the disk utility built into OS9 to see if I could repair the problem. (I think OS9's disk utility is called "Disk First Aid")
    When using OS9s disk utility (I think it is called "Disk First Aid") the following report is issued:
    Problem: Invalid key length, 4,943
    Test done. Problems were found but Disk First Aid cannot repair them.
    My questions are:
    What is an "Invalid key length"?
    How serious is this?
    What would cause this?
    Could this have been caused by the physical condition of the disk or possibly by the software on the disk?
    Would re-formatting the drive fix it? (Of course I would try to save any data first onto another disk)
    Or is it risky to continue to use this disk even after reformatting it?
    I guess I have a lot of questions here and if anyone could make any suggestions or comment on why "Invalid key length" errors happen I would really appreciate it. Thanks:)
    Here are some details:
    When I bought the 80 GIG hard drive from ebay the first steps I took were to format the drive using OS9's "drive setup", load the OS9 drivers and then I verifed the disk. The disk seemed to be fine. Then I cloned his old drive onto this 80 GIG drive using Corbon Copy Cloner. I was sure the 80 GIG drive was in a healthy state at that time and I trusted it enough to give it to my friend for his startup drive. Now that the drive has failed with his data and programs, I feel pretty bad. How could this "Invalid key length" error occur?
    Should I go back to the person who sold me the drive on ebay and ask for a refund? Or are "Invalid key length" errors a common occurance with hard drives that should just be accepted? Or might it possibly be the contents (data) on my friend's disk that caused this error.
    It has been suggested to me to use "Tech Tools Pro" or "Disk Warrior" to repair the disk. Hopefully that might repair the disk. Unfortunately these programs are too expensive for this purpose because they would cost more than the computer actually costs (its an old imac G3 computer). I found a service that would run Disk Warrior on the disk to repair it for a $50 fee. Still, that is also not worth it as the computer may not even be worth $50.
    Here are some specifications:
    80 GIG drive specs: SEAGATE BARRACUDA 7200.7 80GB hard drive
    computer: imac G3 (slot loading version)
    OS: Mac OS9
    Thank you for any suggestions especially as to whether I should attempt to return the hard drive or look for a refund for this hard drive or attempt to reformat the drive and try again (backing up the data first).
    I also question the source of all the data on my friends computer. If he had the original operating system disks (which he said didn't come with his computer when he purchased it second-hand), I could have easily re-installed the OS and the applications. But he doesn't have any disks. That serves me right for having to deal with trying to help out someone who has software from a questionable source. I'm never doing that again. I guess that makes me guilty too as an accomplice. I don't feel very good about this
    I didn't know for sure - but I guess I should have assumed his software was illegal if he didn't have the disks - I was afraid to ask. I'm never putting myself in this possibly illegal situation again. Never again will I try to help someone out who doesn't clearly have the legal disks. Please forgive me and everyone else who reads this post. I feel shameful about this but somehow I must get myself out of this problem. I've learned a good lesson. Should I attempt to fix his computer? Or should I tell him to first buy a legal OS and software before I can help him out? You see I feel further guilt because I was the one who gave him the 80 GIG problematic hard drive that failed and I feel I should have to fix it. Can anyone offer me a bit of advice? What do I do?
    What's the right thing to do?

    Thank you Jim and Apple2Freak,
    I appreciate your comments. I am now suggesting to my friend to buy a legal OS and if that is the case I am suggesting to him to move to OSX instead of OS9. Luckily he let me know there wasn't much data on that drive that he needed to save. I am still trying to determine if I could still use this hard drive with the keylength errors if I erase it or if the hard drive has permanent damage. I am hoping that I could install OSX on it and erase the hard drive to start again.
    This imac (slot loading version) can support up to OS 10.3.9 however I might consider Xpostfacto to try to run 10.4. But then I would need to buy 10.3.9 as well as 10.4 and that would double my OS cost. I think I might just look for OS 10.3.9 only. Its not worth it for me to buy two OSes for it.
    Jim, your post was very interesting because it also pointed out that it could be an issue of bad RAM. A few months ago we installed some new second-hand RAM and I wonder if that is the cause of all these problems. I will have to check that first.
    Thanks again!

  • How much Hard drive space lion uses

    How do I find out how HD space my upgraded Lion OS and Apps are using?  I am purchasing a new iMac with 256GB SSD for the main drive and 1 TB for the secondary drive, but I want to make sure that 1. My current apps and lion will fit on the new HD as well as have room for a windows BootCamp install.  Is there a way to find out?

    General requirements
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    In Finder you can under View>Show staus bar  This will tell how much available space you have on your HD.
    You can in Terminal copy and paste:
    df -H

  • How much hard drive do I need on the Macbook Pro?

    I am buying a Macbook Pro 13" to use for email, internet, word processing and photo editing (in raw and jpeg).  It comes wtih 500 or 750 GB Seriesl ATA hard drive which is way more hard drive than I need.  I will keep most of my photos on an external hard drive and in a cloud and retain about a thousand photos on the Macbook's hard drive at a time for viewing and processing.  I would like to upgrad to the Solid State hard drive but want to choose the least amount of hard drive that would be sufficient for the applications I would like to run and the realtively small amount of photos I want to store on the Macbook Pro.  Do you think this would be sufficient?  Is the solid state hard drive so much better than the serieal ata hard drive that it would be a good investment?

    The downside of moving a lot of your storage to an external hard drive is that then you need a second external hard drive on which to back the first one up, and you need to remember to actually DO the backups regularly. I greatly prefer to have a large enough internal drive to store all my files, just because it makes backing them all up so much easier (and therefore more likely to be done often).
    As for the downside of SSDs, do they need any more downside than costing several times more per GB of storage than hard drives? Particularly when they're still in their early childhood, are still improving by leaps and bounds, and better SSDs will probably cost half or less than half as much per GB a year from now as they do today? There's more than enough downside to discourage me from buying an SSD now. Thanks, but I'll wait for prices to come down, sizes to increase, the limited-write-cycles problem to be addressed on Macs, and SSDs' long-term reliability to be more definitively confirmed. And frankly, I just don't care whether a file takes half a second or three seconds to open. I can afford to wait 20 or 30 seconds a day.

Maybe you are looking for

  • Premiere Pro 2.0 Render Farm Issues

    Hi,  I have a desktop and a laptop connected to each other using cat5 cable and a Linksys router. Each has a copy of Premiere Pro 2.0 and  FrameServer. I have a test movie that I would like to render on the farm. I exported the movie from my desktop

  • How do I fix the orientation of a desktop background photo?

    I have a bunch of photos that I'd like to be able to use as my desktop background - all are saved on my computer with the correct "portrait" orientation, but when I open system preferences they weirdly show up in "landscape" orientation.  I've tried

  • Cannot view pdf files on Safari

    I am unable to view pdf files with Safari

  • PDF Quality using PDF Print driver on Mac v FMP on PC

    We're having an issue that I hope you can help us resolve. When creating the same PDF document on a MAC v PC using Adobe PDF driver built into the Filemaker Pro we are getting a drastically different quality of document. Originally I assumed it was t

  • [SOLVED] Mounting /tmp as tmpfs does not work?

    Hi, running arch since a few days now, and began a bit of tweaking. I read, mounting the /tmp dir as a tmpfs adding the following line to my /etc/fstab should slightly increase performance. (plus removing the old /tmp mount rule) none /tmp tmpfs node