How much is 4GB of Video Memo

My Zen is a 4GB. If I don't have any music or photo's on it, How many Minutes of Video will it hold?

Why don't you put a video on it, see how many minutes the video is and then look at how much space it takes up. Then do the math and you'll now.

Similar Messages

  • How Much Memory Does RECORD VIDEO Require?

    I want to record a video iChat that could go for ninety minutes. How much memory would that take?
    Thank you,
    Sandolini

    Sandolini wrote:
    I want to record a video iChat that could go for ninety minutes. How much memory would that take?
    Thank you,
    Sandolini
    Welcome to Discussions, Sandolini
    In addition to the info that Ralph has already provided, I offer one additional thought.
    Ralph is my guru on iChat, so I am sure he can correct me if I am mistaken, but I believe that iChat 4 (the one in your posted Mac OS X 10.5.8 system info) adjusts camera frame rates and possibly video window size based on connection and processor speeds. I also seem to recall that the maximum video size for iChat 4 is 320x240.
    iChat 4's video size/quality decisions are made based on the info from both ends of the video connection. If I am correct, different users could, therefore, experience different video data capture rates, possibly even when connecting to different chat contacts. These capture rates translate directly into different file sizes for recorded videos. In any case, most iChat 4 recordings (maximum size of 320x240) are likely to be considerably smaller (at least one-fourth to one-third smaller) than the 640x480 video iMovie captures from external iSight.
    My suggestion is that you record a one minute test, if possible with the same video chat connection. If recording success will be a critical, one-opportunity-only event, you may wish to make several one minute tests to see if there is enough variability that you must account for it. Once you know the file size for a one minute recording, you can calculate ninety times that to find the maximum estimated space required for your ninety minute recording.
    When determining your needed space, be sure you leave the extra space Ralph recommends.
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
    LED Cinema Display  G4 PowerBook 1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • How much is 4gb of ram enough for?

    I just got  a 4gb oF RAM MacBook Air. I was wondering what kinds of applications I will be able to use side by side without slowing down. Also, of I ran photoshop by itself would it be ok?

    RAM cleaning APPS are not only useless, theyre frequently detrimental.
    Mavericks is optimized to use RAM correctly, and no 3rd party can either equal or best this operation.
    Nearly 100% of "RAM cleaning" applications have extremely low ratings for a reason.
    They are not recommended and often "worse than useless".
    http://appleinsider.com/articles/13/06/12/compressed-memory-in-os-x-109-maverick s-aims-to-free-ram-extend-battery-life
    Mavericks uses RAM much more efficiently than any other previous version of OS X. Mavericks now has a memory compression feature that will compress the memory occupied by applications that aren't being actively used and give the freed up RAM to the application that needs it the most.           Memory Pressure graph that tells you how stressed is the system in terms of memory.
    Fore more information about OS X Mavericks new system management technologies visit:
    http://www.apple.com/osx/advanced-technologies/
    See page 5 here:
    http://images.apple.com/media/us/osx/2013/docs/OSX_Mavericks_Core_Technology_Ove rview.pdf

  • I want to take a voice memo off my iPhone, put it into iTunes Library and convert it to an .mp3.  How do I get the voice memos from my phone?  I can't seem to move them out of the Devices folder, no matter how much I try to copy and paste or drag and drop

    I want to take a voice memo off my iPhone, turn it into and .mp3, and email it.  My iPhone shows up under "Devices" in my iTunes but doesn't allow me to move the voice memo files I see sitting there into my Library no matter how much copying and pasting or dragging and dropping I try to do. 
    Also, I need to convert the file to an .mp3. 
    How come no voice memo files show up when I go into my iPhone via My Computer?  All it shows are the videos and pictures in the DCIM folder, but not the voice memos.  Is there another way to access the voice memos other than through iTunes? 

    Email it to yourself, then save the file and then see if you can convert it to MP3.

  • Size limit for how much video can be included in an AIR file?

    I'm making an AIR app to play a video locally.  It is on a PC with no internet connection, so the video (fv4) is  included with the air install file.  Is there a size limit for how much  video can be included in an AIR file? I seem to get the "...file is  damaged..." error when I include a video over 200mb. I use Flash CS4 to  create and AIR is v 1.53.

    I'm authoring in CS4 on a MAC with the latest OS and 4GB ram.  It plays fine on the Mac.  On a WIN7 PC with all updates and 4GB ram I get the errors if the air file that contains a video file over 200mb.  I heard that AIR 2 should solve the issue and that it is just a PC issue.. Maybe...   I have not tried using ADT to package the file.

  • Acmcneill1ug 14, 2014 7:16 AM I have IMac OSX 10.9.4, 4GB,Processor 3.06 with Intell2Duo. I would like to check for Malware. I run a TechTool Pro 6 every month and that comes up great. When check how much memory I am using, with only Safar

    Acmcneill1ug 14, 2014 7:16 AM
    I have IMac OSX 10.9.4, 4GB,Processor 3.06 with Intell2Duo. I would like to check for Malware. I run a TechTool Pro 6 every month and that comes up great.
    When check how much memory I am using, with only Safari open I am using 3.9 and more of her 4.0 memory. She is very. very slow in processing. I had 4000
    trash to clean out and it took her over an hour to expel. Also for some reason Safari will not allow me to click on a link, in my G-mail, and let it go to the page.
    It has a sign saying a pop-up blocker is on and will not let me do it. I must open the stamp to look at my e-mails and if I have redirected link now I can do it.
    I have not changed my preferences so where is this pop-up blocker?
    I have looked at preferences on Safari and Google, which I do not understand Google, and do not see where this blocker could be.
    Malware is something I want to make sure is not on my computer. Tech Tool Pro 6 is all I know of and it does not detect Malware.
    Help.
    Ceil

    Try Thomas Reed's Adware removal tool. He posts extensively in the communities.
    Malware Guide - Adware
    Malware Discussion

  • How much recording time on my iphone 4 voice memo?

    How much recording time on iphone4 voice memo?

    I would suggest that it depends on how much free space you have on the phone. I have done voice memos of over an hour before, and have read of other users reporting larger ones. I do not believe there is any documented source of what size you can do.

  • How do I display time remaining in a captivate published video so the learning can know how much time is remaining in a video

    After I publish my video it just plays but there is no indication of how much time is remaining on the video while watching. How do I display this

    It is possible, but you have to know 'time' is bit different, depending if you are talking about the 'editors' time or the real time spent by the the trainee. Have a look at this old blog post, that tries to explain:
    http://blog.lilybiri.com/display-time-information
    Time can show on the TOC (editors time), and if you have a playbar with a progress bar that gives some indication as well, but both for pure linear projects.

  • How much ram can my Macbook Pro5,4 take? Mid 2009 2.53 gh z, it's already got 4gb and I want up upgrade to 8gb, will it take it?

    How much memory can my Mac Book take?
    Below is the spec:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,4
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.53 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz
    Thanks - Seb

    on a similar note, I have 4GB in my 4.1.  I take it that is it's max?
    Model Name:    MacBook Pro
      Model Identifier:    MacBookPro4,1
      Processor Name:    Intel Core 2 Duo
      Processor Speed:    2.4 GHz
      Number Of Processors:    1
      Total Number Of Cores:    2
      L2 Cache:    3 MB
      Memory:    4 GB
      Bus Speed:    800 MHz
      Boot ROM Version:    MBP41.00C1.B03
      SMC Version (system):    1.27f3

  • HT4623 I lost my apps and iTunes after a restore, but it says there isn't enough space on the iPhone 4. How do I know how much space needs to be freed up? I keep deleting photos and videos, but I'm still getting the same message.

    I did an iphone 4 software update. It then asked me to do a "restore" in order for me to be able to use the latest iTunes. I did a "restore" to "factory settings" (this was the only option listed) thinking I'd be able to sync later and get everything back and ended up losing all my purchased apps and iTunes. When I open iTunes, "Welcome to your new iphone" and it says I can re-do the "restore" and choose my lastest update. I assume this will give me back my apps and iTunes. When i choose to do this, it says there isn't enough space on the iPhone. How do I know how much space needs to be freed up? I keep deleting photos and videos from the phone, but I'm still getting the same message every time I re-try. I don't want to delete everything, but I don't know what to do...? Thanks!

    Thanks but I think it has something to do with the 'restore'. in the newest iTunes 11, when I click on the tab "iphone", it redirects me to the "welcome to your new iphone" page and asks about doing a 'restore'. I already did a 'restore', but it went to the original factory settings and I want to 'restore' to my lastest back up as of April 12. When I choose that option, it says my iphone doesn't have enough space. I don't know how much I need to delete in order to make it work. I've deleted lots, but it only has 4.1 GB available. I'm not sure why this isn't enough to do a 'restore'. I don't want to delete all my photos and videos, but maybe I will have to?...7.7GB is used up for that. I can't sync or do ANYTHING...

  • Can only boot in Safe Mode -NVDA(Video): Channel exception! is this hardware or software and how much did it cost you to get it fixed out of warranty?

    NVDA(Video): Channel exception! exception type = 0x1 = Fifo: Fifo Method Error
    NVDA(Video): Channel exception! exception type = 0x6 = Fifo: Parse Error
    My iMac freezes and crashes and I get the above message in the kernel log. I have done a few reinstalls from time machine but it comes back.
    I get to the point where I want to erase the disk and do a clean install but I get afraid that the kernel will panic during install/ I will lose the registration keys to software/ or that I am just wasting my time.
    Has anyone truly fixed this? Is an erase and install going to help?
    My first crash happened a week or so after updating to 10.6.8. I was watching videos in full screen mode. When I pressed esc it froze. (Sometimes the audio continues but the iMac is frozen.)
    So I stopped use Chrome but it followed me to Safari. I like YouTube Videos and can't watch them in safe mode -no sound.
    After installing from a time machine back-up and just re-installing my Mac will boot normally but it doesn't last long and I often can't even boot to CD. It sometimes crashes in the finder.
    What's going on? 
    This computer is old but should have tons of life left- if you've been here how did you get out of this mess?
    How much is it going to cost me to get my computer back?
    I can't do a hardware test because I don't know where the original disks are but tech tools and the system profiler assure me everything is OK.
    Any moral support is welcome.

    It could be a failing drive or logicboard (GPU), it is old and has probably served you well, you can take to an Apple store and they will diagnose it for free, and give you your options, but it is old and are you willing to pay much money to have it repaired? You are probably better off replacing it.
    There is some software for data ercovery such as Disk Warrior, but it's not cheap.
    Or ask about this program
    http://nwsinglespeed.hubpages.com/hub/Do-You-Know-About-Apples-Flat-Rate-Repair- Pricing
    You can try shutting down and try a SMC reset
    http://support.apple.com/kb/HT3964
    and see if it will boot, if it does try to do a back up, but something sounds as though it may be in failure mode.
    Good luck

  • How can I tell what video card and how much video memory does my iMac have?

    How or where can I find out: which video card does my iMac have and how much video memory does it have? I've tried looking in System profiler, but I did not see it there. Thank you.

    Once you open System Profiler there should be a line called "memory" which is the RAM (vs. hard drive size which is not what is called memory), e.g., Memory: 1.5 GB
    For video click on the line Graphics/Displays and look at the chipset line, e.g., Chipset Model: GeForce2 TwinView
    Kappy's instructions are handy for checking the original configuration of your computer, but that may have been changed at some time, especially if you bought it secondhand.

  • I have an older MacBook Intel 2 Duo processor 2.4Gh 4GB mem running 10.6.8.  Yahoo just informed me I must upgrade my Safari (5.1.10). How much can I upgrade from 10.6.8 without degrading performance?

    I have and older MacBook Intel 2 Duo processor 2.4 Ghz, 4GB mem, running 10.6.8 and Safari 5.1.10.  Yahoo has just informed me that they will no longer support Safari 5.1.10 and my question is how much higher than 10.6.8 can I go to get a better Safari before I start reducing performance on an older computer? It is about 6 years old but runs fine for my purposes.

    If you want to stay with 10.6, try Firefox which is still being updated.
    Firefox
    Check that your computer is compatible with Mountain Lion/Mavericks/Yosemite.
    To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
    MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
    MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
    Your Mac needs:
    OS X v10.6.8 or OS X Lion already installed
    2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
    8 GB or more of available space
    Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.      
    Application Compatibility
    Applications Compatibility (2)
    Do a backup before installing.
    Mountain Lion
    If your computer isn’t compatible, you might be able to upgrade to Lion.      
    Computer Compatibility - Lion                       Lion

  • Is it possible to upgrade my macbook air 13" from 1.86 GHz 128 gb flash and 2GB memory to the 2.13 GHz  256 and 4GB memory, how much would it cost?

    Is it possible to upgrade my macbook air 13" from 1.86 GHz 128 gb flash and 2GB memory to the 2.13 GHz  256 and 4GB memory, how much would it cost?

    About the only thing that "might" be able to do is upgrade the SSD. OWC sells SSD upgrades for that unit. You would have to contact Apple though to verify that no warranty issues would apply when making the upgrade.

  • How Much Video Can Fit on a DVD Burned in Encore???

    Hi there,
    I'm hoping the always helpful adobe community can help me with a question I've had for a while. I am using Adobe Production Suite CS4 and frequently making DVDs in Encore. I am filming with a Canon XH-A1 camera, capturing with HDV Split, and importing the footage into premiere where it is recognized as being .M2T files and 1440x1080.
    I am wondering how much video I can dynamic link into Encore (how long a dvd can be), while maintaining 100% quality? Is there someway to tell within Encore, or is there a rule of thumb on which to go by? How about for Blu-Rays?
    Also, given the answer to the question above, is there a way to make longer DVDs while maintaining the same high quality - such as with Dual-Layers? I don't know much about Dual Layers or much on this topic in general, so any info would be greatly appreaciated.   
    Thanks in advance,
    Aaron

    >Encore (how long a dvd can be), while maintaining 100% quality?
    There is no such thing as 100% quality when you go from HD to the SD that is on a DVD
    Read the Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html for ideas
    As to how much you may fit at "high" quality... that all depends on the subject matter
    A soccer game with a lot of fast action will require a higher bitrate setting and take more space than a speaker standing still at a podium
    There is no one answer
    Yes, you may fit more on a dual layer DVD... I think that is discussed in the user guide
    The individual CS5 pages also have links to the CS4 user guide pages
    CS5 User Guides - online and PDF (see link in upper right corner at individual pages)
    http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html

Maybe you are looking for

  • Data Transfer from Oracle database 10g to Oracle database 9i

    Hi Experts, We need to insert records at the speed of min 10,000 records per sec in the following condition. Source : Oracle 10 g and Oracle 9i We need to select the data from Oracle 10g and insert into Oracle 9i database. Here we not allowing to cre

  • How do i add a computer to my itunes movies

    How can I add another computer to watch my iTunes movies?

  • LaserJet Pro 200 M276nw Scan to Computer

    I have just taken delivery of my new HP LaserJet Pro 200 MFP M276nw.  The printer software is installed on the computer.  All set up and working fine except for the printer's "Scan to Computer".  I am using Windows 7.  On the printer's Scan Menu ther

  • How do I run a thread without its panel.

    I have created a vi in my application that I run as a thread. I run the thread by using an invoke node. When I am testing under LabView everything is fine but when I create the executable I have found problems. As I am starting the thread with an inv

  • How do I get my iWork's docs to iCloud?

    Can anyone tell me what I am missing?  I have the latest Iworks apps on my imac and macbook pro.  I think that I have enabled everything in icloud.  I can not see how to store documents in  the cloud or access them between systems.