How much it cost to update bb9810 and to change the front panel

i went to various service centres for updation of my phone's software but everywhere they are charging more than 500 and i have my phone in warranty period when i informed it to them , they said i have to leave the phone for 1 week , i dint get that how can it takes 1 week for software updation .. please help

Hello,
Every shop controls their prices...no one here can tell you if those prices are good, bad, or otherwise. But, you can conduct the process yourself. The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

How to change the font and type in the front panel

Can you tell me how to change the font and type in the front panel if i want to make it looks more beautiful.
1110340040

Hi there,
You can change the font size and type as shown below:
- Ee Lim -
See that button on the left side of this post...
If you feel my post is helpful, all you need is just (at most) 2 seconds to click that button, to show your appreciation. Thank you~~

Is it possible to change the font style and size of the front panel title?

Can you change the style and size of the Front Panel Window title? I seem to have no luck. I seem to be stuck with only 1 font/style. I would like to use a superscript for 1 of the letters in the title. Is this possible? If it isn't this would be a nice feature to have in the future. I am using LabVIEW 8.5.1.

Things like the window title font is a function of Windows - not LV. You can change it globally, but not on a window by window basis.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How do I center and/or maximize the front panel on every event?

Hi,
So basically I have a little issue with trying to maximize and then scale back a VI's front panel every time a user selects a different option from a ring control.
So far i've been using the LVWINUTIL.LLB and the provided window size vi to set the size I want on ring selection change which works fine, but as far as centering the VI goes, the method I'm calling only works the first time. After it maximizes and I select a different option on my ring control which is linked to a case within a while loop it simply resizes to the size i set which is correct but when I got back to the ring case which is supposed to maximize the front panel again, it doesn't do it. Centralizing the FP also only works once.
I'm using FP.Run-Time Position.Centered to try and center the VI....only works once. I do understand that this might be the desired behavior since the name is run-time position meaning it'll only do this when the VI is first run, however I need this to happen more then once, how can i do this? Thanks...

How did you center the FP?
Their a method that should work time after time.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Is there a way to use the built-in Datalogging and programmatically log the front panel while the vi is running?

I would like to use the built-in Data Logging feature. There is the "Log at Completion" option, but is there a way to programmatically make a new log record while running? I looked around in VI server and couldn't find any methods that would do that. Currently, I am grabbing all of the front panel control references using VI Server and if there are any changes, the changed values are written to a log file along with a date/time stamp. I'm mostly dealing with buttons, which simply change from 0 to 1 or 1 to 0, so it's not too hard to visualize what was pressed. It works okay for reconstructing what happened, but it would be much nicer to use the built-in fe
ature because you can "replay" directly onto the front panel and actually see what the changes were. However, without being able to programmatically make a new log, it won't work for me.

Jake,
There are several options here.
I would suggest using your own code for datalogging. The datalogging you are referring to is primarily for debug, and one shot datalogs of front panel indicators (and controls?), not including graphs, etc.
If you go to the file functions, you will see a menu for datalogging. These functions will allow you to save your data, as you need it, simply, and in a compact format.
I recommend opening the datalog file, doing all your file operations, and closing the file before the program is complete. There are several examples of this in the examples database.
Good luck

How can we get an image of selected area of the front panel

i am plotting some graphs and want a group photo of all those in one shot is it possible????
n i want to get the graph coordinates on the mouse click.....
i.e when i click on the graph at any place the values corresponding to it must be retrieved. how do we do that,,...
i have tried with the labview help but didnt get any help
help please????????

Here's a start. This will get the front panel image and display it as a picture indicator.
You could use an event structure to capture the mouse clicks on the picture control to set the image area. Then using the mouse coordinates (referenced from the image coordinates), you can get the image subset "Get Image Subset.vi".
Message Edited by vt92 on 04-20-2010 08:30 AM
"There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal

Does anyone know how much it costs to replace an iPhone screen at the Apple Store?

Okay, so I got the amazing new iPhone 4S about three weeks ago and was so excited. That is until my cup slipped out of my hands this morning and landed on my phone, cracking the screen:/
Now, I love Apple products and have always advised my friends that they are a great buy, but I am really disappointed. It's not like there was a great distance between phone and cup (no more than an inch) and now I have a great big crack on my shiny new device. I havent even dropped it yet! And aren't they meant to have reinforced glass or something...?
Anyway, rant over, I was just wondering if anyone knows how much it would cost me to replace the screen at the Apple store? Ive tried to search the website but found nothing. Also I read that they replace it...? I don't want the phone replaced, I just want it fixed......

You can get an out of warranty replacement for $199.
If you want it repaired then you will need to find a third party repair facility.

How much modification can be made to VIs without changing the test sequence?

Hi,
Stupid question (likely).
If I have a TestStand (4.1) test sequence and within I am calling various Labview VIs (8.6), can I modify the VI in a small way without affecting the teststand sequence?
I realise if I change the connectors in anyway this will definitely require modification (or reloading) of the VI in teststand but what if I change something more internal, say change a for loop to while loop or add cases etc.??
Basically I want to add some features to a VI but I don't want to have to go through over 100 sequence files, reload the VIs (although this can be done programmatically), save the files as new versions and then test them to make sure nothing has broken.
Cheers.

Hey WiMAX_Eng, thanks for posting your workaround. In a previous post you mentioned programatically relinking VIs. I assume that you followed the method discribed in the following articles. I wanted to post them here, so other members of the community can refer to them.
Update VI Calls Dialog Box
http://zone.ni.com/reference/en-XX/help/370052H-01/tsref/infotopics/db_update_vi_calls/
How Can I Update All The VI Calls In A TestStand Sequence?
http://digital.ni.com/public.nsf/allkb/D7CB87B8EE52E7978625758400762D2D?OpenDocument
Thanks for your time,
Best wishes,
Rich R
Applications Engineer
National Instruments UK & Ireland

Updating Quicktime and iTunes changes the time to 7:08pm... everywhere!

Sorry if this should go in another section but I think it's relevant to Leopard usage.
Just upgraded iTunes and Quicktime from Software Updates and repaired permissions. Now all I get in every folder and Mail message a time of 7:08pm even if I re-save a file. Only the day changes but not the time. It's literally stuck on 7:08pm. Even Time Machine has it all the way back for 2 weeks!
Has anyone come across this after applying these updates?

This was a problem due to my extremely small brain folks. Sorry.
I'd adjusted the International setting in the time format preferences to 7:08 and it, of course, changed everything. Changed it back to the default and, bingo, it's fine now.
I'm not touching anything else! The last thing Leopard needs is a scaremonger at the moment.

Is it possible to sort the controls and indicators on the front panel?

Programming events would be much easier in an application with lots of
controls and indicators, if there where a means to sort and group them.
Is there any means to do so such that you see a sorted list when choosing the control that triggers an event etc..?

I am not aware of a way to sort the list of controls (that are listed in the edit events dialog) by name. They seem to be sorted in the order they were created.
I agree, sorting could be useful for large VIs.
LabVIEW Champion . Do more with less code and in less time .

Does anybody know how much it costs in the UK to get the front screen of an iPhone4 replaced as it had smashed?

I have an iPhone4 and I have just smashed the front screen. Does anybody know how much it costs to get this fixed/replaced in the UK??

You can look this up yourself:
http://www.apple.com/support/service/
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service Fee listed below.
Please note Out-of-Warranty Repair Service fees from your carrier may be different than those listed below.
iPhone Model
Out-of-Warranty Service
iPhone 5
£ 186.44
iPhone 4S
£ 146.44
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
£ 126.44
The Out-of-Warranty Service Fee includes a £ 7.44 shipping fee, which applies only if service is arranged through Apple and requires shipping. All fees are in British pound sterling and include VAT. iPhone Out-of-Warranty Service may also be available from your wireless carrier. Pricing may vary."

How can I make a global change so all controls and indicators labels on the front panel change to another colour?

How can I make a global change so all controls and indicators labels on the front panel change to another colour?
I need to change the front panel so that it can be used in a dark environment.

Hi
The only way I see, is to use the "Controls[]" property and iterate through all of them. But don't forget about nested elements (i.e. clusters, tab-controls, ...).
Thomas
Using LV8.0
Don't be afraid to rate a good answer...

How to run a subVI without poping up normally, but when clicking a button, popup the front panel?

I know pop-up the front panel of a subVi when called by selecting VI Properties>>Windows apperence.
But what I need to do is: always run the SubVI inside the parent VI as the nornal subVI do without poping up. But when I click a button"show front panel", the SubVI popup the front panel.
Is there anyway to do this?
Thanks,

ossoo,
You can use a static VI reference to the subVI and then use the Front Panel Open invoke method to show the front panel when you want. I have attached two VIs that show this. I saved these VIs for LabVIEW 2009 so you should be able to open them up and run them in 2009 or later. Add.VI is the subVI that you are calling. The Caller.VI is just a While Loop that contiually calls the Add subVI. Inside of the While Loop is also a Case Structure with a Static VI Reference (you might need to change the path this is pointing to after downloading the VIs to your computer for this to work) and the Front Panel Open invoke method. You can run the Caller.VI and interact with the main Front Panel as normal and see the subVI but then you can click the Open subVI? boolean button and it will open the subVI's front panel. You can continue to interact with the main front panel and see the values update on the subVI's front panel as well. You can just close the subVI's front panel when you are done viewing it. Does this help?
Grant H.
National Instruments
LabVIEW Product Marketing Manager
Attachments:
Caller.vi ‏19 KB
Add.vi ‏23 KB

Need your help, How to write a program such as drag the objects to the front panel like using the LabVIEW Front Platte

Dear all:
Sorry for so long title.
I need your help with how to drag the objects and drop onto the front panel.
Like the LabVIEW front platte, i can choose the objects i can drop onto every where of the front panel.
Could drag and drop function can satify?
Any idea?
Thank you
Attachments:
Image00000.jpg ‏75 KB

What you want to do is relatively complicated and it seems that your knowledge of LabVIEW is relatively basic. I suggest you try searching this site and google for LabVIEW tutorials. Here, here, here, here, here and here are a few you can start with and here are some tutorial videos. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
Try to take over the world!

How to show the front panel when launching VI with Call by reference node??

Hello!
I just wonder how I make the front panel visible during execution when I launch the VI with CALL BY REFERENCE NODE.
Se example.
Could u also show me how to change different properties (window size ..) of the front panel??? (launched with CALL BY REFERENCE NODE)
Thank you!
Attachments:
test.vi ‏18 KB

In VI Properties>>Window Apperance>>Customize you can check "Show front panel when called". This will open the front panel on each call. It doesn't matter how the call was initiated.
You can set a lot of Front panel properties during runtime. Place a Property Node in the block diagram. Change the class from App to VI. Under properties select Front Panel window>>Panel bounds to set the position and size of the front panel.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

How much it cost to update bb9810 and to change the front panel

Similar Messages

Maybe you are looking for