How much memory/RAM can I put into my HP Compaq 8710p when running 64-bit Windows 7?

How much memory/RAM can I put into my HP Compaq 8710p when running 64-bit Windows 7?
This question was solved.
View Solution.

The maximum supported is 8 GB.
The Maintenence and Service guide for the Compaq 8710p
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • I have an iMac 5.1 ,2ghz core 2duo  with 1gb 667 MHz ddr2 SS ram running osx 10.6.8. How much tota ram can I install and will it be enough to run lion and/or mountain lion?

    I have a iMac 5.1 running osx 10.6.8 , core 2duo, and 1ghz 667mhz DDR sdram. How much ram can be added and will it run lion/mountain lion? Thanks.

    As an additional thought: I had this same model iMac and although you can install 4 GB RAM, it will only address just over 3 GB. Since Lion is somewhat of a memory hog, you really will not be very happy with the performance using anything less than 4 GB - and even 4 GB is a bit of a minimum; fine for basic needs, but any photo or video editing will require more than that.

  • How much RAM can I put into my Macbook Pro?

    Here's my info:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro4,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          2 GB
      Bus Speed:          800 MHz
    I want to upgrade my RAM, as the computer is showing a bit of age at 3 years old now.  I looked at this support page:
    http://support.apple.com/kb/HT1270#link8
    And judged the installation to be easy enough for me to do, but I'm confused as to how much RAM I can buy.  The conflict I see is that "Additional notes" says I can use up to 8GB of RAM, but the table says only 4GB.  What's throwing me off is basic math -- is that 4GB only referring to my slots (thus 4+4=8) or is it saying that anything over 4GB will not be recognized by my computer?
    I spoke with someone at Apple, but he seemed a bit confused by my question, and eventually gave me a "yes" that was timid enough that I felt the need to post here.  So, I'd appreciate the support!  Thanks a lot, everyone.  I'm just looking to not spend more than I need (in terms of buying excess RAM), and make sure I don't ruin my Mac in the process.

    The MacBook Pro 4,1 can acces a maximum RAM of 6GB
    However RAM comes in 4GB modules and you have two slots, so you install 8GB (two 4GB modules) and can only access 6GB of it according to MacTracker.
    Use the free Crucial.com site to make sure your getting the extact specified RAM specs, you can buy it anywhere if you like.
    http://www.crucial.com/
    (no comp)

  • How much hard drive can i put in?

    I just recently purchased a Mac Pro from early 2006. It has the 2 X 2.0GHz Dual Core (4 core) Xenon 5130 processors  with 2 GB of Ram. It came with 250 GB of hard drive space which I am looking to expand. However, I would like to know what the maximum capacity the processors and/or Ram can handle so that way I don't destroy the computer. So, does anyone know?

    RAM. You do want more no matter what. Amazon: 2x2GB $36 and I would get at least two for 8GB (and pull the 2GB you have)
    Disks: $110 will buy you:
    1TB WD Black / 128GB SSD / WD 10K VelociRaptor 250GB all good solid and improvement
    And do not put all your files on the one drive. Use the four disk bays: system, data, backup at least.
    $300 with work and tutorials on MacRumors and Youtube a pair of 5355 2.66's 8-core
    Same system I have and still going better than before.
    And ATI 5770 or something but you will not be able to boot from any DVD or pre-10.6.5 system.

  • TA23843 How much memory upgrade can I get on a late 2006 imac

    Looking to purchase GB memory for late 2006 iMac. What do I get and how much will it support? I want to install OS Lion but need 2GB to do that apparently.

    Here are the specs and maximum capacity for your Late 2006 iMac:
        667MHz DDR2 SDRAM (PC2-5300), supports up to 3GB
    I would recommend OWC or Crucial as excellent online vendors in the US.
    Hope this helps

  • How much RAM can I put into my macbook pro 15 inch?

    I want to put as much as possible in the two slots...how big can they be?
    2.4 ghz intel core 2 duo
    1gb ram 667 MHz DDR2 Sdram

    Click here.
    (57428)

  • HT1635 how much memory I can use w my macbook late 2007

    to whom it may concern:
    How I upgrade my memory of macbook 2007,  I have 2gb

    Get the user manual: MacBook (13-inch, Mid 2007) - User Guide. If you have the Mid-2007 model you can install 4 GBs (2 GBs in each slot) but only 3 GBs will be active. If you have a Late-2007 model you can install up to 6 GBs of RAM.

  • How much memory can I put in my MacBook?

    Hey,
    I have a MacBook.
    Processor 2.13 GHz Intel Core 2 Duo
    Memory 2 GB 800 MHz DDR2 SDRAM
    and I am wondering how much memory I can put in the thing.
    By day my wife uses it for work and pictures and stuff and by night I use it for DJing so I need AS MUCH space as possible.
    Thank you for your time!!
    ~JM~

    Up to 6gb although 4gb would be cheaper http://eshop.macsales.com/shop/memory/Apple_MacBook/White/2.13GHz

  • How much memory (in buffers) is needed for a simple webservice's call?

    Dear expert,
    I'm doing a research work about analysing the main memory usage in SAP ERP systems.
    I would like to find out the space that a simple webservice's call occupies in the buffers, but there is always something occupying the buffers. I know that my call to get the values occupies memory, that's why I use a webservice to get them (to avoid the SAPGUI), I call first $SYNC and I use a BAPI similar to the transaction ST02.
    So could someone help me to find out the way to mesure the memory used by a single webservice's call (it's a very simple, just to create a material)? Thanks in advance.

    Thanks for that. Will try.
    > Date: Fri, 19 Aug 2011 10:27:50 -0600
    From: [email protected]
    To: [email protected]
    Subject: How much memory (RAM) is needed for Elements 9 to automatically fill in the edges when using photome
    The key to successful use of edge fill is to ensure that you've got all the memory allocated to PSE that you can and that the file that results after you merge the panoramic is not too big. When PSE 9 first came out about a year ago, I fooled around with file sizes and I think that on my particular computer the merged file had to be no larger than 20 megs for edge fill to work. I did a quick search through this forum's history but I couldn't find my posts. Maybe somebody else can find them.
    >

  • I want to find out how much memory is left on my macbook pro. I need to know steps to find this out.

    I had a problem today as my computer would not save a file for me.  A box stated macintosh HD was full and I would need to clear some files to make room.  I realized that although I had deleted emails from mac mail, gmail had not deleted these and all still remained on my macbook pro.  I went to gmail and finally deleted all the emails, and there were thousands.  I have been able to save a file as of now but want to know how much memory exists on my macbook pro.  It is confusing when I go to the Apple icon in the upper left corner of my laptop as that states my computer has 4gb of memory, two in each slot.  It does not tell me how much as been used.  Any help with this issue is greatly appreciated.  M.

    The bottom of a Finder window will show you how much HD space you have left. 

  • How much memory can i put in my imac

    how much memory can i put in my new imac       

    Assuming it's a 27" 2012 machine, it will accomodate up to 32GB. I'd strongly recommend reputable vendors such as OWC (www.macsales.com) or Crucial.
    If you bought a 21.5" iMac the RAM is not upgradeable. The 21.5" machines will accomodate up to 16GB from Apple however you have to order the machine with 16GB directly. OWC does provide RAM upgrade kits for the 2012 210.5" iMacs however it is MAJOR surgergy and is full of risks including fatally damaging the machine and invalidating the warranty.

  • How much memory could I put into a HP ProBook 450 (H6P51EA) ??

    Hello,
    I am trying to choose notebook between this models:
    HP ProBook 450 (H6P51EA)
    HP ProBook 450 (H0V97EA)
    HP ProBook 4540s (H5J79EA)
    How much memory could I put into a HP ProBook 450 (H6P51EA) ?? (maximum memory)
    It is difficult to find this information (It is difficult for me as I need to traslate from english.)
    I read the  http://h18000.www1.hp.com/products/quickspecs/14588_div/14588_div.PDF , but there is no concrete information for H6P51EA.
    Help me to find out with it. Where I can find this information?
    It will be better if I will know max memory for each of the notebooks.
    Thanks.

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • How Much Ram can I put in a MBP C2D 2.4 15" (08) (MB133LL/A)

    Can I put 2x4gb modules? 8gb?
    Link?

    The maximum it is designed for is 4 GB, however OWC indicates it will address 6 GB. Look in your manual for the specifications. You don't say how much memory it currently has so I'll assume it has the 2GB it came with. To expand it I would recommend Crucial or OWC's memory however any memory that meets the specifications will work. Here is a link to OWC's site:
    http://eshop.macsales.com/shop/memory/MacBook/Pro/Core2/
    Regards,
    Roger

  • How much ram can I put  In a 12" 867MHZ?

    Hi,
    I've just picked up a 12" 867mhz Powerbook for a very reasonable price! My question is how much ram can i put in it? It currently has 640mb. Also if i can put some more in it will it run Leopard?

    Bear in mind you can customise the install of Leopard to exclude some languages and particularly exclude printer drivers that aren't relevant to you, this will substantially lower the total required space. 12" Powerbooks are rather fiddly to work on - here's a really thorough guide on Hard drive replacement etc. for your Powerbook:
    http://www.ifixit.com/Guide/Mac/PowerBook-G4-Al-12-Inch/53

  • How much memory can I install in my mac book pro?

    Mac book pro 2.4 GHz late 2011 i7....How much memory can I install? Currently have 4Gb but want to run Win 7 on VMware and want to make sure my user has enough

    The position of Apple is that the Late 2011 can take 8 GB, however, OWC, http://www.macsales.com and Crucial, http://www.crucial.com both guarantee their 16 GB ram packages to work.  Both are sellers of high quality ram that is guaranteed to work in Macs.

Maybe you are looking for

  • Saving multiple lines in a file

    ok I have a simple calculator that when you inset the text into text fiel one and when you insert text into tex input 2 when you hit the add subtract or any of the other buttons it will add the date, time, input 1, input 2, calculation performed, and

  • Links between KM Documents

    Hi, we've got some issues with storing documents in EPs KM. First of all we're on EP6 SP2. We have some folder structure with XML-Documents within the deepest folders. Those docs are based on a XML-Form. The docs have a title and two HTMLEditor Field

  • Enable form personalisation in vision11.5.5

    Hi gurus, Can any one pls tell me what profile setting is required to enable form personalisation in vision instance. Message was edited by: user464343

  • Keyboard on IOS 7

    i have ios 7 and now the keyboard isn't useful ! what is to do? can someone help me ?

  • Premiere CC Crashes During Splash Screen

    I just switched from CS6 to CC about a month ago.  Every time I run Premiere CC it crashes on the first run then starts up the 2nd time.  Never seen this in any of the other Premieres (have CS5 and CS6 on the same machine) or any of the other CC apps